Nanocomposites of genipin-crosslinked chitosan/silver nanoparticles--structural reinforcement and antimicrobial properties

This study investigates the feasibility of a novel nanocomposite (GC/Ag) of a genipin-crosslinked chitosan (GC) film in which was embedded various amounts of Ag nanoparticles for wound-dressing applications. In situ UV-vis results revealed that adding chitosan solution did not affect the characteristics of Ag nanoparticles. The water uptake ratios and surface hydrophilicity of the GC/Ag nanocomposite were better and the degradation rates slightly lower than those of the pure GC film. The presence of Ag nanoparticles enhanced L929 cell attachment and growth. Its function as an anti-microbial agent in a GC/Ag nanocomposite was assessed for Ag contents of over 100 ppm. In conclusion, silver ions had dual functions--structural reinforcement and provision of antimicrobial properties to a biocompatible polymer.     

Effect of the air-jet and the false-twist texturing processes on the thermomechanical behaviour of polyamide 6.6 yarns

Polyamide 6.6 multifilament yarns are converted to crimped fibres by texturing in order to simulate the properties of natural staple fibre yarns for textile applications. Texturing is carried out by mechanical stresses (turbulences or twisting) in different atmospheres which affect crystallinity and thermal stability of yarns. Two polyamide yarns with the same linear density but consisting of filaments of different fineness were textured by the air-jet and the false-twist procedures. The influence of texturing conditions and filament fineness on crystallinity and thermomechanical behaviour and dimensional stability were studied by TMA and DSC. The air-jet texturing procedure leads to a slight increase in crystallinity of yarns whereas the false-twist texturing procedure was more effective especially when thicker filaments were textured. The inflection point of the shrinkage curve before melting was a good estimator of the effective temperature of yarn texturing.     

Schnellbestimmung von Cu, Ag und Pd in PbSn-Verzinnungsb?dern durch Atomabsorptions-Spektroskopie

Zusammenfassung Eine Absorptionsmethode zur direkten Bestimmung von Cu, Ag und Pd in Pb-Sn-Legierungen wurde erarbeitet. Für die Bestimmung vorteilhafte Absorptionslinien (Cu 324,7 nm, Ag 338,3 nm und Pd 276,3 nm) wurden ermittelt und auf diesen intermetallische Interferenzen von 0–500 ppm Cu, Ag und Pd sowie von 10000ppm Pb und Sn gemessen. 1g der Legierung wird in 10 ml HNO₃ (D 1,52) und 2 ml 50 % HF gelöst. Die Lösung wird in einer Acetylen-Luft-Flamme analysiert. Die Methode erlaubt Gehalte bis zu 3·10^–4 % Cu, 5·10^–4 % Ag und 8·10^–4% Pd (zweifache Blindwerthöhe) mit ausreichender Genauigkeit zu bestimmen.

---

Rapid determination of Cu, Ag and Pd in PbSn-tinning baths by atomic-absorption spectroscopy

An atomic absorption method for direct determination of Cu, Ag and Pd in Pb-Sn-alloys has been developed. For the determination favourable absorption lines (Cu 324.7 nm, Ag 338.3 nm and Pd 276.3 nm) were found out. Intermetallic interferences of 0–500 ppm of Cu, Ag and Pd as also 10000 ppm of Pb and Sn were measured on these lines. 1 g of the alloy is dissolved in 10 ml HNO₃ (d 1.52) and 2 ml of 50 % HF. The solution is analyzed in an acetylene-air flame. This method allows the analyzing of contents up to 3×10^–4 % Cu, 5·10^–4% Ag and 8×10^–4% Pd (twofold blank) with sufficient precision.

     

Multifunctional PES fabrics modified with colloidal Ag and TiO2 nanoparticles

This study is aimed to highlight the possibility of engineering the multifunctional textile nanocomposite material based on the polyester (PES) fabric modified with colloidal Ag and TiO₂ nanoparticles (NPs). The effects of concentration of NPs as well as the order of Ag and TiO₂ NPs loading on antimicrobial, UV protective, and photocatalytic properties of PES fabrics were examined. The antimicrobial activity of differently modified PES fabrics was tested against Gram‐negative bacterium Escherichia coli, Gram‐positive bacterium Staphylococcus aureus, and fungus Candida albicans. The concentration of Ag colloid and the order of Ag and TiO₂ NPs loading considerably affected the antimicrobial efficiency of PES fabrics. The fabrics provided maximum UV protection upon surface modification with Ag and TiO₂ NPs. Ag NPs enhanced Ag NPs enhanced the photodegradation activity of TiO₂ NPs and total photodegradation of methylene blue was achieved after 24 hr of UV illumination. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermal preparation and stabilization of crystalline silver particles in SiO<Subscript>2</Subscript>-based coating solutions

Ag/SiO₂ coating solutions for antimicrobial functionalisation can be prepared by a thermal reaction (reflux or solvothermal conditions) of mixtures of tetraethoxysilane, alkylamine compounds and AgNO₃. These coating solutions are especially useful for antimicrobial refinement of temperature sensitive materials like textiles or wood. Moreover coating application onto substrates such as glass or metal, as well as preparation of micrometer sized bulk particles by using a spray-drying process is also feasible. The efficiencies of AgNO₃ reduction in the presence of different amine compounds like triethanolamine, triethylamine or diethanolamine are compared. SiO₂ nanoparticles are formed by basic hydrolysis of tetraethoxysilane and stabilize the crystalline silver particles in the solution. The antimicrobial effect of silver containing coatings on textile fabrics is investigated.     

Spectrophotometric determination of mercury(II) and silver(I) with copper(II) and diethyldithiocarbamate in the presence of triton X-100

Procedures for the determination of mercury and silver by displacement of diethyldithiocarbamate (DDTC) from its copper complex in the presence of 1% Triton X-100, and measurement of the decrease in the Cu(DDTC)(2) absorbance, are described. The use of the surfactant avoids the need for an extraction step. Reproducibility within 1% and detection limits of 0.25 ppm Hg(II) and 0.45 ppm Ag(I) have been obtained, and linear calibration ranges up to 13 ppm Hg(II) and 15 ppm Ag(I). In the presence of 0.1M EDTA very good selectivity is achieved.     

Determination of Fe(II), Cu(II) and Ag(I) by using silica gel loaded with 1,10-phenanthroline

The modified silica gel with 1,10-phenanthroline adsorbed was obtained. The adsorption from aqueous solutions onto loaded silica gel of Fe(II), Cu(II) and Ag(I) and their complexes was studied. The loaded silica gel was applied to Fe(II), Cu(II) and Ag(I) reflectance spectroscopy determinations in water (detection limits 0.08, 0.03 and 0.01 ppm respectively). Visual test scales for Fe, Cu and Ag ion determinations in water were worked out.     

Photoactive Chemosensors 2: 8-Hydroxyquinoline Based Cu(II) Selective Fluorescent Tripod

8-Hydroxyquinoline based tripod 3 shows selective fluorescence quenching with Cu(II) and can be used for estimation of Cu(II) (1-6 ppm) even in the presence of Ni(II), Cd(II), Zn(II) (1000 ppm), Ag(II) (100 ppm).     

Density functional theory and QT atoms-in-molecules study on the hydration of CuI and AgI ions and sulfides

The hydrates of Cu+, Ag+, CuS-, AgS-, Cu2S, and Ag2S were investigated with density functional theory (DFT), solvent field, and atoms-in-molecules (QTAIM) calculations. We found that covalent bonding of the first-shell water molecules to the metals plays a significant role in the total solvation energy. Molecular graphs were obtained and the bonding characterized by analysis of the electron density and its laplacian at bond critical points. Long-range electrostatic interactions between solute and the bulk solvent, quantified by solvent-field calculations, are more important for hydrated anions CuS- and AgS- than for Cu+ and Ag+ as well as for the neutral species Cu2S and Ag2S. Computed enthalpies of formation for hydrated Cu+ and Ag+ correlated well with experimentally determined values and allowed us to characterize the structures of several hydrates studied in the gas phase. We found that the stability of the hydrates is leveled in the water solvent field. The reactions of dissociation and substitution of metal sulfides in the gas phase and in solution were compared. A decrease in the of energy of the reactions in going from the gas phase to solution is explained on the basis of the higher coordination of metal atoms in the first hydration shell.     

Possibilities for the Physical Modification of Cellulose Shapes Using Ionic Liquids

Summary: Functional cellulose shapes offer valuable properties for innovative application potentials in textile and medical products. Thereby excellent textile physiological properties of cellulose are allowed to be connected with novel application characteristics like bioactivity, electrical conductivity, heat storage or ability to adsorb liquids or gases. A very advantageous way to modify the properties of fibres, films or textile structures is to introduce particular additives via the Lyocell process. Regard to technical applications, functional additives will be able to incorporate themselves in the shape matrix and, in the case of using N-methylmorpholine-N-oxide monohydrate (NMMO) as solvent, implicate massive technological difficulties and deterioration of properties of the spinning dope. Beside a couple of limiting moments, ionic liquids (ILs) offer as direct solvents an excellent chance for physical modification of cellulose shapes. In contrast to NMMO, they exhibit a significantly higher thermal stability as well as a higher chemical resistance. ILs exhibit most widely a better dissolving capability for a number of different polymers. First results of the development of adsorber materials as well as novel bioactive fibres will be discussed and fibre characteristics will be given.     

Influence of antimicrobial finishes on the biodeterioration of cotton and cotton/polyester fabrics: Leaching versus bio-barrier formation

The influence of antimicrobial activity of two contemporary finishes, specifically a dispersion of colloidal silver (Ag) and 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride (Si-QAC), on the degree of biodeterioration of 100% cotton (CO) fabric and fabric composed of a mixture of cotton and polyester (CO/PET) was studied. Ag was chosen for the leaching agent, while Si-QAC was used as the bio-barrier-forming agent. The biodeterioration of samples finished with different concentrations of Ag and Si-QAC was analysed from a standard soil burial test after 3, 6 and 12 days of exposure to soil microflora. SEM micrographs revealed intensive biodeterioration of the unfinished cellulose fibres, while the highly biologically resistant polyester fibres remained undamaged. A controlled release of Ag successfully inhibited biodeterioration of the cellulose fibres in the CO and CO/PET fabrics when its concentration reached a lethal, biocidal concentration. Contrary to the effects of Ag, the bio-barrier formation of Si-QAC on CO and CO/PET fabrics was insufficient to protect the cellulose fibres during longer periods of soil burial, irrespective of its concentration. Intensive chemical changes to the cellulose were clearly seen from the FT-IR spectra of all of the samples. The resistance of the polyester component to biodeterioration did not provide any significant protection for the cotton component in CO/PET fabric.     

Oxidation‐induced nanostructures on Cu{100}, Cu(Ag) and Ag/Cu{100} studied by photoelectron spectroscopy

Initial surface oxidation and nanoscale morphology on Cu{100}, Cu(Ag) and Ag/Cu{100} have been investigated in situ by X‐ray photoelectron spectroscopy (XPS), X‐ray induced Auger electron spectroscopy (XAES) and the inelastic electron background analysis as a function of oxygen exposure at 3.7 × 10^?2 and 213 mbar pressures at a surface temperature of 373 K. Relative Cu₂O concentrations have been quantified by analysis of the peak shape of the XAES Cu LMM transition. The surface morphology of Cu₂O islands and the Ag layer has been characterized by inelastic electron background analysis of XAES O KLL and Ag 3d transitions. Oxygen‐induced segregation of Cu, as well as the subsequent Cu₂O island formation on Cu(Ag) and Ag/Cu{100} surfaces, has been investigated quantitatively. Our results indicate that Ag has a clear inhibitive effect on the initial oxidation and Cu₂O island formation on Cu(Ag) and Ag/Cu{100} surfaces. The Cu₂O islands are also observed to remain highly strained on Ag/Cu{100} even at higher O₂ exposures. The results suggest that strained Cu₂O islands eventually penetrate through the buried Ag layer, and in conjunction with segregating Cu atoms enable the oxidation to proceed at a similar rate to or even faster than on the unalloyed Cu surface. Copyright © 2007 John Wiley & Sons, Ltd.     

电感耦合等离子体原子发射光谱法测定紫斑牡丹胚乳和胚中矿物质元素

为了给离体体细胞胚的人工胚乳配制提供矿物质元素种类和数量方面的参考,用浓硝酸-高氯酸(4∶1)的混合溶液消解紫斑牡丹的胚乳和胚样品,采用电感耦合等离子体-原子发射光谱法(ICP-AES)测定了样品中的(K、Na、Ca、Mg、Fe、Cu、Zn、Mn、Li、Ni、B、Ag、Cd、Pb)14种矿物质元素含量。结果表明:各元素的校准曲线的回归系数在0.9990～0.9999之间,线性良好;方法精密度高,能多元素同时分析;紫斑牡丹胚乳和胚中均含有植物生长必需的K、Ca、Mg 3种大量元素,Fe、Mn、Cu、Zn、Ni、B 6种微量元素,1种有益元素Na,及Li和Pb,Ag、Cd则未被检测到。在被检测到的12种元素中,Mg、Zn、Mn、Fe、K、Na、Li与Ni 8种元素在胚乳中的含量低于胚中的含量,Ca、Cu、Pb与B在胚乳中的含量则高于胚中的含量。     

用ICP研究鹿科动物骨质疏松症的微量元素特征

鹿科动物的骨质疏松症是近几年出现的一种疾病，它影响鹿的生长发育和繁殖，病重者死亡。我们采集梅花鹿和白唇鹿的毛，血样，用低温灰化方法和温法消解处理样品，用ＩＣＰ分析了毛，血清中微量元素的含量。病梅花鹿毛样中Ｍｇ，Ａｌ，Ｃａ，Ｔｉ，Ｆｅ，Ｃｕ，Ｚｎ的含量比正常组高，Ｔｉ，Ｃｕ，Ｚｎ的偏差率大于１５％，而Ｓｉ，Ｍｎ，Ｐ，Ｐ，Ａｇ，Ｂａ，Ｌａ，Ｃｅ，Ｐｂ比正常组低，Ｖ，Ａｇ，Ｂａ，Ｌａ，Ｃｅ，Ｐｂ存在...     

Spectrophotometric microdetermination of copper(II), silver(I), and gold(III) using azastyrene Schiff bases

A new method for the spectrophotometric microdetermination of Cu(II), Ag(I), and Au(III) using β-2-hydroxybenzyl-5-bromo- (I_a), 5-chloro- (I_b), and 3-methoxy-2-hydroxyazastyrene (I_c) is given. The optimum conditions favoring the formation of the colored complexes are extensively studied. The molecular structure was found to be (1:1) and (1:2) (M:L). Beer's law is obeyed up to 5.00, 8.64, and 11.82 ppm for Cu(II), Ag(I), and Au(III), respectively, while the optimum concentration ranges using the Ringbom method are 0.6–5.00, 1.00–8.60, and 2.00–11.80 ppm for the same metal ions, respectively.     

Organometallic oligomers based on 1,8-Diisocyano-p-menthane (dmb): syntheses and characterization of the [[M(diphos)(dmb)]BF4]n and [[Pd2(diphos)2(dmb)](ClO4)2]n materials (M = Cu, Ag; diphos = dppe, dppp)

A new strategy to synthesize organometallic oligomers is presented and consists of using the title diisocyanide and chelated metal fragments with bis(diphenylphosphine)alkanes. The title materials are synthesized by reacting the [M(dppe)(BF4)] and [M2(dppp)2](BF4)2 complexes (M = Cu, Ag; dppe = bis(diphenylphosphino)ethane, dppp = bis(diphenylphosphino)propane) with dmb and the Pd2-bonded d9-d9 Pd2(dmb)2Cl2 dimer with dppe or dppp. The model compounds [M(diphos)(CN-t-Bu)2]BF4 (M = Cu, Ag) and [Pd2(diphos)2(CN-t-Bu)2](ClO4)2 (diphos = dppe, dppp) have been prepared and characterized as well for comparison purposes. Three of the model compounds were also characterized by X-ray crystallography to establish the diphosphine chelating behavior. The materials are amorphous and have been characterized from the measurements of the intrinsic viscosity, DSC, TGA, and XRD, as well as their capacity for making stand-alone films. The intrinsic viscosity data indicate that the Cu and Pd2 materials are oligomeric in solution (approximately 8-9 units), while the Ag materials are smaller. For [[Cu(dppe)(dmb)]BF4]n, a glass transition is reproducibly observed at about 82 degrees C (DeltaCp = 0.43 J/(g deg)), which suggests that these materials are polymeric in the solid state. The Cu and Ag species are luminescent in the solid state at room temperature exhibiting lambda(max) and tau(e) (emission lifetime) around 480-550 nm and 18-48 micros, respectively, while the Pd2 species are not luminescent under these conditions. During the course of this study, the unsaturated [M2(dppp)2](BF4)2 starting materials (M = Cu, Ag) were prepared, one of which (M = Ag) was characterized by crystallography. The bridging behavior of the dppp ligand in this case contrasts with the chelating behavior seen for the saturated [Cu(dppp)(CN-t-Bu)2]BF4 complex.     

Dynamic mechanical properties of high molecular weight nylon 66 fiber

Dynamic mechanical properties of the ultrahigh molecular weight nylon 66 film and fiber produced by thermally induced solid-state polycondensation are presented. The α peak temperature of tan δ of these treated films and fibers is shifted 8–32°C higher than that of the appropriate control nylon 66 (film and fiber) while the maximum height of the tan δ peaks is decreased. The treated fibers have higher moduli at all temperatures (20–145°C) and humidities (30% RH) than do their control counterparts. The moduli of the treated fibers at 30% RH compare favorably with control yarn at 0% RH. These yarns also have a greater per cent of the 25°C modulus retention as temperature increases.     

Adsorption von Spuren von Insecticiden aus Wasser an Polyäthylen

Trace elements such as Bi, Cu, Ni, Pb, Ag, Au, and Pd that are present in high-purity cadmium can be enriched, if the cadmium is coated with a thin layer of mercury before dissolution in dilute nitric acid up to a small residue. For determination of the trace elements, the residue is completely dissolved in nitric acid. Bi, Cu, Ni, and Pb are determined after separation of the mercury; Ag, Au, and Pd are determined in the solution containing the mercury. The determination is made by atomic absorption spectroscopy. The following amounts can be determined (in ppm): Cu 0.02; Ag 0.05; Au 0.1; Bi, Ni, Pb, Pd 0.2.     

Synthesis of Ag and Ag/SiO2 sols by solvothermal method and their bactericidal activity

Ag and Ag/SiO₂ sols containing nanocrystalline silver particles can be advantageously prepared by solvothermal methods using an autoclave with conventional thermal or microwave heating. In this process, the reduction of silver salts can be realized with alcohols like ethanol in the presence of polyvinylpyrrolidone at temperatures of more than 120 °C. Furthermore a combination of silver salt reduction with hydrolysis of alkoxysilanes during the solvothermal process can yield Ag/SiO₂ composite sols. Particle size and crystallinity of as-prepared particles are analyzed by means of X-ray diffraction and high-resolution transmission electron microscopy. Nanosized silver particles gained by this process exhibit antimicrobial properties that are investigated in detail after application on textile fabrics.     

原子发射光谱法对胃癌患者头发中微量元素的分析

应用原子发射光谱法（ＡＥＳ）对胃癌组和对照人体头发进行分析,测定镁、阵、铁、铜、奶元素的含量,获得了比较满意的结果。经过比较发现胃癌组头发中锌显著低于正常组、银、铁高于正常组,并首次提出悲和需元素银在人体中所起的作用。