双官能度手性和消旋苯并噁嗪的合成及热性能研究

采用无溶剂法合成了新型双酚A和双酚AF(六氟双酚A)基手性和消旋苯并噁嗪单体,利用红外光谱(FTIR)、核磁共振氢谱(1H-NMR)、旋光仪和高效液相色谱(HPLC)对单体结构和性质进行了表征,通过差式扫描量热仪(DSC)和热重分析仪(TGA)对苯并噁嗪的固化行为及聚合物的热性能进行了研究.结果表明,无溶剂法合成苯并噁嗪单体具有反应速度快、产率高、对环境友好等特点;双官能度消旋苯并噁嗪单体由内消旋和外消旋异构体组成,且内消旋苯并噁嗪单体含量高于外消旋;手性和消旋苯并噁嗪单体具有相同的开环聚合行为;由于消旋苯并噁嗪分子的立体构型不同,使得聚苯并噁嗪的自由体积减小,分子链的堆积更加致密,因而消旋聚苯并噁嗪的玻璃化转变温度(Tg)和热稳定性均高于手性聚苯并噁嗪和传统的双酚A-苯胺型聚苯并噁嗪;此外,C—F键具有高的解离能,因而双酚AF基聚苯并噁嗪的热性能显著提高.     

Synthesis, curing kinetics and thermal properties of novel difunctional chiral and achiral benzoxazines with double chiral centers

Novel difunctional chiral and achiral benzoxazine monomers were synthesized from the reaction of bisphenol A with paraformaldehyde and primary amines, including S-(+)-3-methyl-2-butylamine and rac-(±)-3-methyl-2-butylamine, by solventless method. The chemical structures of chiral and achiral benzoxazines were identified by fourier transform infrared, nuclear magnetic resonance (¹H NMR and ¹³C NMR). The curing behavior and non-isothermal curing kinetics of chiral and achiral benzoxazine monomers were investigated by differential scanning calorimeter (DSC). Isoconversional methods based on Friedman and Kissinger–Akahira–Sunose were applied to analyze the curing process of chiral and achiral benzoxazines. The thermal properties of cured polymers were characterized by DSC and thermogravimetry. The results suggested that the optical purity and stereo-configuration for chiral and achiral benzoxazines have definite influence on curing behavior and thermal properties despite the same chemical structure. Chiral benzoxazine displayed typical characteristics of difunctional benzoxazines. Achiral benzoxazine showed distinctly double peaks in DSC exotherms due to the presence of racemic and mesomeric isomers. The thermal properties of achiral polybenzoxazine were slightly higher than those of chiral polybenzoxazine, and were much higher than those of other bisphenol A-C₃–C₈ linear aliphatic amine-based polybenzoxazines because of tight packing, low free volume, and abundant intramolecular and intermolecular hydrogen bonds in network structure of polymers.     

Synthesis of aromatic diamine-based benzoxazines and effect of their backbone structure on thermal and flammability properties of polymers

Three kinds of novel aromatic diamine-based benzoxazines containing naphthalene, propane-2,2-diyldibenzene and neopentyl groups in the backbone, respectively (designated as BAPNCP, BAPBACP and BAPNPGCP, respectively), were synthesized and characterized. In addition, the effects of backbone structures on curing behaviors of the monomers and thermal and flammability properties of the resulting polymers were systematically studied. The results indicated that BAPNPGCP displayed the highest enthalpy of the curing reaction associated with the ring-opening of benzoxazine, which was due to the effect of benzoxazine ring content per unit mass. Interestingly, the 5 wt% weight loss temperature and char residue after thermogravimetric test for poly(BAPNPGCP) were 8 °C and 7% higher than those of poly(BAPBACP). Meanwhile, the total heat release of poly(BAPNPGCP) was less than half of that for poly(BAPBACP), indicating the substantial effect of benzoxazine ring content on flammability and char formation. Furthermore, it was found that poly(BAPNCP) gave the best thermal stability and flame retardancy, which was due to the synergistic effect between naphthalene group and benzoxazine ring content. This study provides new insight into the curing behavior of benzoxazine and further understanding on the high performance of polybenzoxazine.     

Poly(urethane‐co‐benzoxazine)s via reaction of phenol terminated urethane prepolymers and benzoxazine monomer and investigation of their properties

In the present work, a new method was developed for the combination of polyurethanes (PUs) and polybenzoxazine (PBz) to obtain novel thermoset poly(urethane‐co‐benzoxazine)s with good thermal, mechanical, and electrical properties as well as low temperature curing profile. Knowing the catalytic effect of compounds possessing free phenolic groups on ring opening polymerization of benzoxazine monomers, preparation of phenol terminated urethane oligomers (PTPU) as the macroinitiator for a benzoxazine monomer (Ba) was considered. Firstly, NCO‐terminated urethane prepolymers were prepared from the reaction of poly(tetramethyleneether glycol), and 2,4‐tolylene diisocyanate, and then end functionalized with bisphenol‐A under proper condition. DSC, DMTA, and gel content measurements were applied to find optimum ring opening polymerization condition (170°C for 1 hr and 200°C for 15 min). Various kinds of thermoset polymers were prepared by the reaction of PTPU at different molecular weights with variable contents of Ba. All of monomeric and polymeric materials were characterized by conventional spectroscopic methods and their thermal, mechanical, viscoelastic, and electrical properties were measured and properties were correlated to their structure. Due to the interesting properties of these new materials, the possibility of using them as electrical insulators with higher service temperature in comparison to common PUs were examined and their potential applicability was confirmed. Copyright © 2010 John Wiley & Sons, Ltd.     

Crosslinked polyamide based on main‐chain type polybenzoxazines derived from a primary amine‐functionalized benzoxazine monomer

Two types of main‐chain type polybenzoxazines with amide and benzoxazine groups as repeating units in the main chain, termed as poly(amide‐benzoxazine), have been synthesized. They have been prepared by polycondensation reaction of primary amine‐bifunctional benzoxazine with adipoyl and isophthaloyl dichloride using dimethylacetamide as solvent. Additionally, a model reaction is designed from the reaction of 3,3′‐(4,4′‐methylenebis(4,1‐phenylene))bis(3,4‐dihydro‐2H‐benzo[e][1,3]oxazin‐6‐amine) with benzoyl chloride. The structures of model compound and polyamides are confirmed by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopies. Differential scanning calorimetry and FTIR are also used to study crosslinking behavior of both the model compound and polymers. Thermal properties of the crosslinked polymers are also studied by thermogravimetric analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Photoinitiated cationic polymerization of monofunctional benzoxazine

The photoinitiated ring‐opening cationic polymerization of a monofunctional benzoxazine, 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine, with onium salts such as diphenyliodonium hexafluorophosphate and triphenylsulfonium hexafluorophosphate as initiators was examined. The structures of the polymers thus formed were complex and related to the ring‐opening process of the protonated monomer either at the oxygen or nitrogen atoms. The phenolic mechanism also contributed, but its influence decreased with decreasing monomer concentration. Thermal properties of the polymers were also investigated by differential scanning calorimetry and thermogravimetric analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3320–3328, 2003     

Qualitative and quantitative analysis of a thermoset polymer, poly(benzoxazine), by pyrolysis-gas chromatography

The chemical composition of a poly(benzoxazine) thermoset polymer (a copolymer of bisphenol-A benzoxazine and tert.-butylphenol benzoxazine) has been studied by pyrolysis-gas chromatography (Py-GC). Major pyrolysates have been identified and the possible degradation pathways have been investigated. A specific pyrolysate was identified for quantitative analysis after carefully proving the linear relationship between the pyrolysate signal intensity and monomer concentration over a wide range of compositions. A method to determine the concentration of the monomer that potentially acts as a cross-linking unit has been developed. In this study, Py-GC was shown to be an excellent analytical technique for the qualitative and quantitative analysis of thermoset polymers.     

Recent development on bio-based thermosetting resins

Due to the rapid depletion of crude oil and serious environmental pollution, the synthesis of polymers from renewable resource is becoming more and more important. Up to now, a great variety of biomass and bio-based platform compounds have been taken to prepare the polymers. However, as two representative thermosetting resins, epoxy and benzoxazine resin derived from renewable feedstocks only obtain limited attention compared with the popular bio-based plastics, including PLA, PBAT and PHBV etc. The reason might be that the properties of previously reported thermosetting resins directly obtained from biomass are usually unsatisfied, and their application fields are limited. In this paper, the latest development on the synthesis of high-performance bio-based epoxy and polybenzoxazine resins are reviewed. In addition, to further broaden their applications, the functionalization strategies are also summarized. The objective of this work is to help us fully aware the present situation of bio-based thermosetting resins and then promote their faster development, especially practical application.     

Electrochemically induced deposition of poly(benzoxazine) precursors as immobilization matrix for enzymes

Water-soluble benzoxazine oligomers were synthesized by reacting bisphenol A, tetraethylenepentamine and formaldehyde. The pre-formed benzoxazine oligomers can be further electropolymerized from aqueous suspensions under formation of poly(benzoxazine)-based films on electrode surfaces. Integration of glucose oxidase in a poly(benzoxazine) film let to highly reproducible and stable biosensors. Poly(benzoxazines) are proposed as a new family of stable polymers for the design of enzyme electrodes.     

Synthesis and characterization of nanomagnetite thermosets based on benzoxazines

Nanomagnetite thermosets were obtained by thermally activated ring opening copolymerization of benzoxazine groups coated on the surface of the nanomagnetite with bare benzoxazine. For this purpose, carboxylic acid containing 1,3‐benzoxazine was synthesized and covalently bonded on magnetite nanoparticles by postcoating method. The average size of benzoxazine coated nanoparticles was 40–100 nm as determined by Dynamic Light Scattering (DLS), Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) measurements. The crystal structure of benzoxazine coated nanoparticles was shown to be magnetite by X‐ray diffraction (XRD) analysis. Thermally activated curing behavior of nanomagnetite‐benzoxazines has also been studied by differential scanning calorimetry (DSC). Magnetic and thermal properties of the cured samples were investigated. It was shown that the precursor nanomagnetite benzoxazine and cured samples exhibited typical ferromagnetic character with low coercivities between 1.5 and 2.5 Oe. The cured samples showed high thermal stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6780–6788, 2008     

Alternative synthetic strategies for Schiff base derived liquid crystal polymers: A comparative study

Semiflexible liquid crystalline polymers based on Schiff bases as mesogenic cores have been synthesized through different synthetic strategies. The mesogenic cores are derived from 1,5-naphthalenediamine linked to a polymethylenic spacer by means of ether or ester groups. The synthetic strategies differ in the disconnection of the molecules to design the synthesis of the repeating units. Polymers were synthesized either as polyazomethines, where imine bonds are formed in the polymer synthesis, or as polyethers or polyesters, where the ether or ester groups are formed at the polymer-forming stage. The influence of the synthetic method and the linking groups between mesogenic core and flexible spacer on the thermal and mesogenic properties has been analyzed by DSC, thermogravimetry, and optical microscopy. The possibility of obtaining hydroxy-functionalized polymers by different synthetic strategies has been studied as well as the influence of these groups on the thermal and mesogenic properties. © 1996 John Wiley & Sons, Inc.     

The chemical effect of furfuryl amide on the enhanced performance of the diphenolic acid derived bio-polybenzoxazine resin

As a renewable chemical, diphenolic acid (DPA) has attracted immense interest in bio-based polymer science. However, its application for polybenzoxazines is limited due to decarboxylation, that is, the release of CO₂ during the curing reaction of benzoxazine. In this study, the amidation strategy of converting DPA to diphenolic amides (DPAM) was demonstrated to solve this problem while simultaneously improving the thermal properties of polybenzoxazine. DPA was amidated by separately using four amines (hexamine, cyclohexylamine, furfurylamine, and aniline), then reacted with furfurylamine and paraformaldehyde to synthesize their benzoxazine monomers. By using TGA and DMA, all amide-containing polybenzoxazines were found to exhibit excellent thermal stabilities. Among all of the benzoxazine resins, poly(DFA-fa), which was obtained from amidation with furfurylamine, exhibited the highest glass transition temperature (T_g) of 310°C and a decomposition temperature (T_d10) of 406°C. Furthermore, a possible post-curing reaction mechanism was proposed to explain the outstanding thermal performance of poly(DFA-fa) resin. This study proposes an innovative strategy to solve the decarboxylation of DPA-based polymers, which is of significance for high-performance bio-based polymers.     

Cellulose as matrix component of conducting films

Conjugated polymers gain growing importance as conductive materials in industrial applications in various fields of electronic devices. Cellulose with its extraordinary supramolecular structure and material properties can help to awake the possibilities for conducting polymers in interplay of the two materials. The ability of additional derivatization, the stiff and oriented molecular structure and the inherent strength, stability and film-forming properties give cellulose a complementary role to the brittle conjugated polymers, cellulose imparting the features of a stable and robust carrier component. To go forward this way, making a composite out of cellulose and conducting polymers is a prerequisite. Different strategies to form composite materials of non-derivatized cellulose and conductive organic polymers were tested. Significant differences between various mixing strategies as well as between the conducting polymers polyaniline (PAni), polypyrrole (PPy), and polythiophen (PTh) were observed. In situ synthesis of the conducting polymers in cellulose solutions and microcellulose dispersions as well as blending of pre-synthesized conducting polymers in these cellulose systems were tested. Unexpectedly, not homogenous mixtures showed best results in respect to film formation and conductivity, but composites formed by heterogeneous mixtures of the conducting polymers within a cellulose gel. Best results were obtained with finely dispersed PAni. The results support development studies towards circuitry and photo-current systems based on cellulose carriers.     

3-甲基邻苯二酚/糠胺型聚苯并噁嗪的制备与性能

通过分子设计合成了含有酚羟基的3-甲基邻苯二酚/糠胺型苯并噁嗪(M-f). 通过差示扫描量热法(DSC)测得M-f的放热峰值温度(T_p)为172 ℃, 而间甲酚/糠胺型苯并噁嗪(MC-f)的T_p为244 ℃, 表明酚羟基的引入有利于降低苯并噁嗪的开环固化温度. 通过非等温DSC法研究2种苯并噁嗪单体的固化动力学, Kissinger法和Ozawa法的计算结果均表明M-f的表观活化能低于MC-f. 此外, 通过拉伸剪切强度测试考察了聚苯并噁嗪对于金属基材的黏附性能, M-f聚合物对于铝和低碳钢基材的拉伸剪切强度分别为2.53 MPa和3.09 MPa, 均高于MC-f聚合物.     

2,2,6,6‐Tetramethylpiperydinyl‐1‐oxyl (TEMPO) Functionalized Benzoxazines Prepared with a One‐Pot Synthesis for Reactive/Crosslinkable Initiators of Nitroxide Mediated Polymerization

In this work, the incorporation of a 2,2,6,6‐tetramethylpiperydinyl‐1‐oxyl (TEMPO) group to a benzoxazine ring is performed using a one‐pot synthesis for the preparation of TEMPO‐functionalized benzoxazine compounds and polymers as reactive and crosslinkable initiators for nitroxide‐mediated polymerization (NMP). The TEMPO‐functionalization reaction of benzoxazine, traced with ¹H NMR, is conducted with sequential radical transfer and coupling reactions. Moreover, polystyrene‐grafted polybenzoxazine copolymers are prepared with the TEMPO‐benzoxazine initiator and NMP of styrene. The polymerization system exhibits the characteristics of controlled radical polymerization, including controlled molecular weights of products and ability for sequential polymerization. Moreover, based on the chemical reactivity and crosslinking ability of benzoxazine groups, the synthesis route developed in this work will widen the scope of the design and synthesis of functional and high‐performance polymers.

     

Polysiloxane‐containing benzoxazine moieties in the main chain

Polysiloxanes containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diallyl functional benzoxazine monomer is synthesized through the Mannich and respective ring closing reactions of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde, and allyamine. Subsequent hydrosilylation reaction of the resulting allylic monomer (B‐ala) with 1,1,3,3‐tetramethyldisiloxane (TMDS) in the presence of Pt catalyst yields the corresponding oligo(B‐ala‐tetramethyldisiloxane)s (OBTMDS). Using the anionic polymerization route, OBTMDS was then converted to poly(bisbenzoxazinedimethylsiloxane)s (PBDMSs) by reacting with readily available cyclic oligomer octamethylcyclotetrasiloxane (D4) or decamethylcyclopentasiloxane (D5) in the presence of tetrabutylammonium hydroxide as catalyst. The structures of the precursor diallyl monomer, the intermediate oligomer, and the resulting polymers are confirmed by Fourier transform infrared and ¹H NMR analysis. Curing behavior of the products at various stages has also been studied by differential scanning calorimetry. Flexible transparent films of the PBDMSs are obtained by solvent casting. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of novel bisphthalonitrile resins linked by different molecular weight main-chain polybenzoxazines

A series of novel type bisphthalonitriles with different molecular weight main-chain polybenzoxazines as linkages have been successfully synthesized using 4, 4′-diaminodiphenyl methane, paraformaldehyde, bisphenol A and 4-nitrophthalonitrile as initial materials. The structures were characterized by Fourier transform infrared (FT-IR) and proton nuclear magnetic resonance (¹H-NMR). The formation of benzoxazine and the existence of nitrile groups were confirmed by the absorbance at 950cm^?1 of benzene attached with oxazine ring and 2231 cm^?1 of nitrile groups. The characteristic resonance peaks observed at about 4.52 (C-CH₂-N) and 5.28 ppm (N-CH₂-O) also determined the structure of benzoxazine ring. The curing behaviors were monitored by differential scanning calorimetry (DSC) and FT-IR. Two-stage polymerization mechanisms were observed according to the ring-opening of benzoxazine and the polymerization of nitrile groups catalyzed by phenolic hydroxyl groups, which generated during the curing reaction of benzoxazine. The polymerization of these bisphthalonitriles exhibited self-promoted curing behaviors. The completion of polymerization was proved by the disappearance of the band located at 950 cm^?1 in FT-IR. Thermogravimetric analysis (TGA) was used to investigate the thermal stability, and the results showed that the cured polymers achieved extremely high char yield from 61.1% up to 74.2% at 800°C under nitrogen and exhibited increasing decomposition temperature as the contents of phthalonitrile groups increased, which indicated that the polymerization of phthalonitriles could improve the thermal stability.     

Cocuring behaviors of benzoxazine and maleimide derivatives and the thermal properties of the cured products

The cocuring behaviors of 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine (P‐ABz) and various N‐phenylmaleimide compounds were studied with DSC, FTIR, and TGA‐GC/MS. The presence of benzoxazine compound promoted the polymerization of maleimide groups. In contrast, 4‐hydroxyphenylmaleimide (MI‐OH) and 4‐maleimidobenzoic acid (MI‐COOH), which possess acidic moieties, showed an acid‐catalytic effect on the polymerization of benzoxazine groups. The cocuring composition of P‐ABz/MI‐COOH showed low polymerization temperatures, high glass transition temperature above 220 °C, and comparable thermal stability to conventional polybenzoxazines. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1890–1899, 2006     

Synthesis and curing of amino‐containing benzoxazine as a novel hardener for diglycidyl ether of bisphenol‐A

Benzoxazines containing various additional functional groups have been extensively reported to improve the properties of polybenzoxazines. In this work, a novel amino‐containing benzoxazine (PDETDA‐NH₂) was conveniently synthesized from diethyltoluenediamine (DETDA), 2‐hydroxybenzaldehyde, and paraformaldehyde and was used as a hardener for diglycidyl ether of bisphenol‐A (DGEBA). The curing behaviors of PDETDA‐NH₂ and PDETDA‐NH₂/DGEBA systems were studied by DSC, FT‐IR, and ¹H NMR. When curing, PDETDA‐NH₂ was firstly polymerized to N,O‐acetal‐type polymer and then rearranged to Mannich‐type polymer at elevated temperature, while the addition reaction between amino and benzoxazine was discouraged because of the steric hindrance of alkyl substituents. During PDETDA‐NH₂/DGEBA curing, it was found that the reactions happened in the order of addition polymerization of amino and epoxide, ring‐opening polymerization of benzoxazine, etherification between phenolic hydroxyl of the polymerized benzoxazine, and epoxide. Compared with DETDA cured DGEBA, PDETDA‐NH₂ cured DGEBA showed higher modulus, higher char yield, and much lower water uptake.     

Recent advancement on polybenzoxazine—A newly developed high performance thermoset

Polybenzoxazine is a newly developed addition polymerized phenolic system, having a wide range of interesting features and the capability to overcome several shortcomings of conventional novolac and resole type phenolic resins. They exhibit (i) near zero volumetric change upon curing, (ii) low water absorption, (iii) for some polybenzoxazines T_g much higher than cure temperature, (iv) high char yield, (v) no strong acid catalysts required for curing, (vi) release of no byproduct during curing and also possess thermal and flame retarding properties of phenolics along with the mechanical performance. Though benzoxazine based materials possess several advantages, they have not yet became very attractive to the industries. To improve the mechanical properties and processibility several strategies have been reported including (i) synthesis of benzoxazine monomers with additional functionality, (ii) incorporation of benzoxazine in polymer chain, and (iii) benzoxazine based composites or alloys. In this article, we have discussed about the recent development of benzoxazine chemistry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5565–5576, 2009