A functionalised ionic liquid: 1-(3-chloro-2-hydroxypropyl)-3-methyl imidazolium chloride

An ionic liquid (IL) containing an appended 3-chloro-2-hydroxypropyl functionality group 1-(3-chloro-2-hydroxypropyl)-3-methyl imidazolium chloride was synthesised by the reaction of N-methyl imidazole, hydrochloric acid and epichlorohydrin. The ionic liquid showed reasonably high conductivity and heat stability up to 230°C. Its structures were characterised by FT-IR, ¹H NMR and ¹³C NMR spectra. The physical characteristics of the ionic liquid, such as conductivity and solvation abilities have been investigated. Due to its high polarity, the IL is able to dissolve many inorganic salts, and due to hydroxyl-rich microenvironment, it is able to dissolve cellulose go up to 10 (wt%). The ILs can be used for synthesising other ILs or polyelectrolyte.     

Cellulose organic solutions: A nuclear magnetic resonance investigation

Four solvents of cellulose have been studied by using ¹³C-NMR spectroscopy. All these solvents, N-methyl morpholine-N-oxide, methylamine, hydrazine, and paraformaldehyde (PF), contained dimethyl sulfoxide (DMSO) as a cosolvent. Oligomers of cellulose of DP = 10 soluble in hot DMSO have been used as model compounds. ¹³C chemical shifts and line shapes show that three of the mentioned solvents are “true solvents” of cellulose. On the other hand, dissolution of cellulose in DMSO-PF system occurs by the formation of a statistical derivative of cellulose. Enriched ¹³C bacterial cellulose on C-1 and C-6 positions have been used to identify the ¹³C positions mainly in DMSO-N-methyl morpholine-N-oxide system. This solvent has been found to be degradative for the macromolecule when the solution is kept at 100°C over a long period. Viscosity measurements show a reduction of the molecular weight in these conditions. Polarimetry indicates that no glucose is present in solution and hence there is a statistical break of the chain. Enriched cellulose solution in DMSO–N-methyl morpholine-N-oxide has been also used for relaxation time (T₁) determination both of the solvent and of the enriched carbons of the polymer. Nuclear Overhauser enhancement (NOE) was found to be 1.8 for C-1 and 2.1 for C-6 showing that relaxation phenomenon is not purely dipolar. T₁ values of 97 and 65 msec are found for C-1 and C-6 of cellulose, in good agreement with the values known for polysaccharides. Determination of T₁ for the different carbon atoms of the solvent DMSO-N-methyl morpholine-N-oxide with and without cellulose shows a large reduction of T₁ for N-methyl morpholine-N-oxide molecule. This denotes a slower molecular motion of this molecule and a preferential interaction with the cellulose macromolecule.     

Interactions of ionic liquids with polysaccharides 9. Hydroxyalkylation of cellulose without additional inorganic bases

Water-soluble hydroxyalkyl cellulose with a molar degree of substitution of up to 2.79 was prepared under completely homogeneous reaction conditions in various ionic liquids without addition of inorganic bases. In acetate containing solvents the IL acts as a catalyst. The substitution patterns of the cellulose ethers were analyzed by ¹³C NMR spectroscopy, ¹H NMR spectroscopy after peracetylation and GLC/MS after permethylation and depolymerization. A diminished tendency towards the formation of side chains compared to heterogeneously prepared hydroxyalkyl celluloses in the presence of inorganic bases was found.     

Inorganic Molten Salts as Solvents for Cellulose

Inorganic molten salts can be used as efficient solvents for cellulose in a wide range of degrees of polymerization. Furthermore, molten salts can be applied as reaction medium for the derivatization of cellulose. For both dissolution and derivatization of cellulose, knowledge of the solution state as well as information about chemical interactions with the solvent system is essential. Using the melts of LiClO₄·3H₂O, NaSCN/KSCN/LiSCN·2H₂O and LiCl/ZnCl₂/H₂O as cellulose solvents, factors which determine the dissolving ability will be discussed. Besides the specific structure of the molten salt hydrate, the cation and the water content of the melt are the most important factors for the dissolving capability of a molten salt hydrate system. FT-Raman spectroscopy, ⁷Li and ¹³C NMR spectroscopy were applied to describe solvent–cellulose interactions and the state of cellulose dissolved in the molten salts. Using Raman and solid state NMR spectroscopy it was proved that cellulose is amorphous in the frozen solvent system. The application of inorganic molten salts as a medium for cellulose functionalization is demonstrated for cellulose carboxymethylation and acetylation.     

Solid-state NMR studies of methyl celluloses. Part 1: regioselectively substituted celluloses as standards for establishing an NMR data basis

Three methyl celluloses with completely uniform substitution pattern, 2-O-methyl cellulose (1), 3-O-methyl cellulose (2) and 6-O-methyl cellulose (3), were prepared according to the cationic ring opening polymerization approaches starting from substituted 1,2,4-orthopivalate derivatives of d-glucose. These samples allowed for the first time to sort out the methyl substitution effects on solid-state NMR chemical shifts and relaxation. Dipolar dephasing experiments allowed the detection and assignment (¹H, ¹³C) of the methyl groups. In 1 and 2, these resonances overlapped with those of C-6, whereas in 3, the methyl signal experienced a low-field shift into the region of C-2,3,5. ¹³C T₁ experiments were used to verify different relaxation behavior of the carbon sites, particularly the short relaxation time of at the carbon substitution site next to the methyl groups. This effect was used to unambiguously identify the ¹³C chemical shifts of the carbons carrying the methoxyl substituent, although they overlap with all resonances in the C-2,3,5 region. The data obtained for the standard samples with uniform substitution will now be used as the basis for determining methylation patterns and substitution degree in commercial methyl celluloses.     

Preparation,Characterization and Properties of Cellulose Acetate-Grafted-Poly(glycidyl methacrylate) Copolymers

The cellulose acetate-grafted-poly(glycidyl methacrylate) copolymers were synthesized successfully by free radical polymerization. The resulting copolymer was characterized by proton nuclear magnetic resonance (¹H-NMR), solid-state ¹³C-NMR, Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). The crystallization behavior, thermal properties, specific particle surface area, moisture sorption behavior of the modified cellulose acetate were investigated by wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET) method and Dynamic Vapor Sorption (DVS) instrument. It was found that the poly(glycidyl methacrylate) (PGMA) grafting was effective in improving the water adsorption of cellulose acetate (CA) changing the specific surface area, and reducing the T_g of copolymers.     

Study of cellulose/ethylene diamine/salt systems

To better understand the complex interactions leading to dissolution of cellulose in ethylene diamine (EDA)/salt solvents, studies of interactions in sub systems of solution components and a model system based on cellobiose were conducted. Interaction between EDA and salt cation was investigated through comparison of solvation of K⁺, Na⁺ and Li⁺ in the EDA/H₂O binary solvent system. The least degree of solvation of K⁺ in EDA increased its availability for direct interaction with cellulose. Wide angle X-ray diffraction was utilized to study the interaction between EDA and cellulose. The effect of various solvents on cellulose crystalline polymorph was compared. The results indicated that cellulose was easily accessible to EDA and 1,3-diaminopropane, but was not affected by water or ethanolamine. The effect of salt concentration was investigated using cellobiose as a model compound through HSQC (Heteronuclear Single Quantum Coherence) NMR spectroscopy. Solid state CP/MAS (cross polarization/magic angle spinning) ¹³C NMR spectroscopy was employed to characterize changes in the conformation of the CH₂OH group of cellulose during dissolution. A mechanism scheme of cellulose dissolution in EDA/KSCN systems was proposed based on the information gathered.     

Structure Identification of Aporphine Alkaloids by On‐Line Coupling of HPLC‐NMR with Loop Storage

The potential of coupling HPLC separation methodology to on‐line high resolution nuclear magnetic resonance (NMR) spectroscopy has been demonstrated with a mixture of nine aporphine alkaloids. A loop storage procedure after separation has facilitated the identification of closely eluted peaks (α = k₂/k₁ = 1.01 and Δv = 0.37 min = 367 μL). These were collected off‐line and identified by a 1D ¹H NMR spectrum. For this purpose an automated procedure has been implemented which includes the use of shaped pulses, multiple solvents suppression and ¹³C satellite suppression of acetonitrile.     

Solid-state NMR on thermal and fire residues of bisphenol A polycarbonate/silicone acrylate rubber/bisphenol A bis(diphenyl-phosphate)/(PC/SiR/BDP) and PC/SiR/BDP/zinc borate (PC/SiR/BDP/ZnB) - Part I: PC charring and the impact of BDP and ZnB

Structural changes in the condensed phase of bisphenol A polycarbonate (containing 0.45 wt% poly(tetrafluoroethylene))/silicone acrylate rubber/bisphenol A bis(diphenyl-phosphate) (PC/SiR/BDP) and PC/SiR/BDP/zinc borate (PC/SiR/BDP/ZnB) during thermal treatment in nitrogen atmosphere and in fire residues were investigated by solid-state NMR. ¹H, ¹¹B, ¹³C and ³¹P NMR experiments using direct excitation with a single pulse and ¹H-³¹P cross-polarization (CP) were carried out including ³¹P{¹H} and ¹³C{³¹P}double-resonance techniques (REDOR: Rotational Echo Double Resonance) on a series of heat-treated samples (580 K-850 K). Because many amorphous phases occur in the solid residues, and solid-state NMR spectroscopy addresses the most important sites carbon, phosphorus and boron, this paper is the key analytical approach for understanding the pyrolysis and flame retarding phenomenon in the condensed phase of PC/SiR/BDP and PC/SiR/BDP/ZnB.For the system PC/SiR/BDP it is shown that (i) at temperatures around 750-770 K (main decomposition step) carbonaceous charring of PC occurs and arylphosphate structures are still present, reacted in part with the decomposing PC; (ii) for higher temperatures from 770 K the phosphorus remaining in the solid phase increasingly converts to amorphous phosphonates and inorganic orthophosphates with a minor amount of crystalline orthophosphates; and (iii) ¹H-³¹P{¹H} CP REDOR and ¹H-¹³C{³¹P} CP REDOR NMR experiments suggest that the phosphates and phosphonates are bound via oxygen to aromatic carbons, indicating the interaction with the carbonaceous char.When ZnB is added to the system PC/SiR/BDP, (i) ZnB leads to a slightly enhanced PC decomposition for temperatures below 750 K; (ii) α-Zn₃(PO₄)₂ and borophosphate (BPO₄) are formed in small amounts at high temperatures suggesting a reaction between BDP and ZnB during thermal decomposition; and (iii) most of the borate remains in the solid residues, forming an amorphous pure borate network, with the BO₃/BO₄ ratio increasing with higher temperatures.The NMR data of thermal and fire residues are highly correlated, underlining the importance of this work for understanding the pyrolysis and flame retardancy mechanisms in the condensed phase during the burning of the PC/SiR blends.     

The undesirable acetylation of cellulose by the acetate ion of 1-ethyl-3-methylimidazolium acetate

Abstract  

The ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([C2mim]OAc) is considered to be an inert solvent of cellulose and lignocellulosic biomass. Acetylation (1.7% mol, or DS 0.017) of cellulose after dissolution in technical grade [C2mim]OAc (150 °C for 20 min), is demonstrated by compositional analysis, FTIR analysis and ¹³C NMR spectroscopy (in [C2mim]OAc with ¹³C enriched acetate). This acetylation, in the absence of added acylating agents, has not been reported before and may limit [C2mim]OAc utility in industrial scale biomass processing, even at this low extent. For example, cellulose acetylation may contribute to IL loss in processes where the IL is recovered and reused and inhibit enzyme saccharification of cellulose in lignocellulosic biofuel production processes based on saccharification and fermentation.     

Breathing Effect via Solvent Inclusions on the Linker Rotational Dynamics of Functionalized MIL-53

The breathing effects of functionalized MIL-53-X (X=H, CH₃, NH₂, OH, and NO₂) induced by the inclusions of water, methanol, acetone, and N,N-dimethylformamide solvents were comprehensively investigated by solid-state NMR spectroscopy. 2D homo-nuclear correlation NMR provided direct experimental evidence for the host-guest interaction between the guest solvents and the MOF frameworks. The variations of the ¹H and ¹³C NMR chemical shifts in functionalized MIL-53 from the narrow pore phase transitions to large pore forms due to solvent inclusions were clearly identified. The influence of functionalized linkers and their host-guest interactions with the confined solvents on the rotational dynamics of the linkers was examined by separated-local-field MAS NMR experiments in conjunction with DFT theoretical calculations. It is found that the linker rotational dynamics of functionalized MIL-53 in narrow pore form is closely related to the computational rotational energy barrier. The BDC-NO₂ linker of activated MIL-53-NO₂ undergoes relatively faster rotation, whereas the BDC-NH₂ and BDC-OH linkers of activated MIL-53-NH₂ and MIL-53-OH exhibit relatively slower rotation. The host-guest interactions between confined solvents and MIL-53-NO₂, MIL-53-CH₃ would significantly induce an increase of the order parameters of unsubstituted carbon and reduce the rotational frequency of linkers. This study provides a spectroscopic approach for the investigation of linker rotation in functionalized MOFs at natural abundance with solvents inclusions.     

Complexation of tetrandrine with calcium ion probed by various spectroscopic methods and molecular modeling

The formation of the complex between tetrandrine and the calcium ion, in solution, was studied using FTIR, UV-Vis, ¹H NMR, ¹³C NMR and electrospray mass spectroscopy spectroscopic methods and molecular modeling. The calcium salts used were: Ca(ClO₄)₂·4H₂O and Ca(Picrate)₂ in the solvents: acetonitrile (CH₃CN), deuterated acetonitrile (CD₃CN) and tetrahydrofurane (THF). The determined complex stability constant was: 20277±67 dm³ mol⁻¹ and corresponding free energy ΔG₀=−5.820±0.002 kcal mol⁻¹. The molecular simulation of the complex formation with the MM3 Augmented force field integrated in CAChe provided useful data about its energy. Combining the experimental results and molecular modeling we propose a model for the structure of tetrandrine-Ca complex with an eight coordinated geometry.     

First diphosphinoamine ligand bearing a polymerizable side chain: Complexation with copper(I)

A diphosphinoamine ligand with a polymerizable side chain, (PPh₂)₂N? CH₂? C₆H₄? CH?CH₂ (vbzpnp or 1 ), was synthesized. The ligand could be polymerized by anionic polymerization with n‐butyllithium as the initiator. Polyvbzpnp was soluble in tetrahydrofuran and chloroform but was insoluble in methanol and was characterized with NMR, IR, and gel permeation chromatography. The number‐average and weight‐average molecular weights were 40,050 and 55,690, respectively, and the polydispersity index was 1.39. [Cu(CH₃CN)₄]ClO₄ formed a bischelated complex with the monomer and produced [Cu( 1 )₂]ClO₄ ( 2 ), and CuCl formed a tetramer, Cu₄( 1 )₂Cl₄ ( 3 ). All the compounds ( 1 , 2 , and 3 ) were characterized with single‐crystal‐structure determination, NMR, and IR spectroscopy. The addition of [Cu(CH₃CN)₄]ClO₄ to polyvbzpnp resulted in an insoluble crosslinked polymer, which was characterized with solid‐state ³¹P {¹H} magic‐angle‐spinning NMR. The copolymerization of styrene and 1 produced a styrene–vbzpnp copolymer that was found to be soluble in common organic solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3411–3420, 2005     

Preparation of sol�Cgel hybrid materials from ��-methacryloxypropyltrimethoxysilane and tetramethyl orthosilicate: study of the hydrolysis and condensation reactions

Organic?Cinorganic hybrid materials suitable for the development of sol?Cgel coatings for metallic surfaces were prepared by hydrolysis and condensation of ??-methacryloxypropyltrimethoxysilane (MAPTMS) and tetramethyl orthosilicate (TMOS). The hydrolysis of MAPTMS/TMOS was carried out in an ethanol/water solution. The prehydrolysis stage of MAPTMS/TMOS system was monitored by Fourier transform infrared spectroscopy (FTIR) and liquid-state ²⁹Si and ¹³C nuclear magnetic resonance (²⁹Si and ¹³C NMR). FTIR analysis indicated that the hydrolysis of MAPTMS/TMOS was accomplished as far as the (SiOMe) band corresponding to unhydrolyzed silane disappeared. The concentration of the alkoxy groups and the extent of self-condensation of mono-, di-, and trisubstituted siloxanes (T species) in the sol were estimated by using liquid-state ²⁹Si NMR spectroscopy. The hydrolysis of the prepared sol was also evaluated by liquid-state ¹³C NMR spectroscopy. The results indicated that under the adopted synthesis strategy conditions, the hydrolysis process requires 4?h to be completed.     

1H NMR analysis of cellulose dissolved in non-deuterated ionic liquids

¹H NMR spectroscopy of cellulose in a non-deuterated polar ionic liquid (IL) was carried out to analyze specific interaction between cellulose and ILs. We applied a polar IL, 1,3-dimethylimidazolium methyl methylphosphonate, as a cellulose solvent for ¹H NMR spectroscopy. To prevent vanishing of the signals of hydroxyl groups (C–OHs) by hydrogen–deuterium exchange, a non-deuterated IL was utilized, and both signals for C–OHs and backbone protons were successfully detected with the aid of the no-deuterium NMR technique and a solvent suppression technique. It was confirmed that C–OHs interacted with ILs more strongly, rather than backbone protons. Furthermore, the signals of the C–OHs at 2-, 3-, and 6-position were independently observed. A strong interaction between C–OH at the 6-position and ILs was confirmed to be a key step for dissolution of cellulose.     

Tuning of the molecular packing structure of comb-shaped polymer-grafted silica by using surface-initiated ATRP to enhance the molecular-shape selectivity towards polycyclic aromatic hydrocarbons

Poly(octadecyl acrylate)-grafted silicas were prepared by surface-initiated atom transfer radical polymerization (ATRP). Initially, undecyl ester and allyl ester-based ATRP initiators were synthesized and then immobilized on silica. The surface-initiated ATRP of octadecyl acrylate was carried out from the initiator-grafted silicas using copper(I) bromide and N,N,N′,N′,N′′-pentamethyldiethylenetriamine as catalyst precursors to produce poly(octadecyl acrylate)-grafted silicas, Sil-C₁₁-ODA_n (obtained from undecyl ester) and Sil-C₃-ODA_n (originated from allyl ester), respectively. Both Sil-C₁₁-ODA_n and Sil-C₃-ODA_n were characterized by DRIFT, suspension-state ¹H NMR, solid-state ¹³C CP/MAS NMR spectroscopies, thermogravimetric analysis (TGA), elemental analysis and differential scanning calorimetry (DSC) measurements. Suspension-state ¹H NMR, solid-state ¹³C CP/MAS NMR and DSC analyses suggest that Sil-C₁₁-ODA_n demonstrated more ordered structure than Sil-C₃-ODA_n. In this paper, it is also described that for ordering of the polymer phase is accompanied by the selectivity increase for the separation of poly cyclic aromatic hydrocarbons (PAHs) in RP-HPLC.     

Surface Chemistry of Nanohybrids with Fumed Silica Functionalized by Polydimethylsiloxane/Dimethyl Carbonate Studied Using 1H, 13C,and 29Si Solid-State NMR Spectroscopy

The investigation of molecular interactions between a silica surface and organic/inorganic polymers is crucial for deeper understanding of the dominant mechanisms of surface functionalization. In this work, attachment of various depolymerized polydimethylsiloxanes (PDMS) of different chain lengths, affected by dimethyl carbonate (DMC), to silica nanoparticles pretreated at different temperatures has been studied using ²⁹Si, ¹H, and ¹³C solid-state NMR spectroscopy. The results show that grafting of different modifier blends onto a preheated silica surface depends strongly on the specific surface area (SSA) linked to the silica nanoparticle size distributions affecting all textural characteristics. The pretreatment at 400 °C results in a greater degree of the modification of (i) A-150 (SSA = 150 m²/g) by PDMS-10/DMC and PDMS-1000/DMC blends; (ii) A-200 by PDMS-10/DMC and PDMS-100/DMC blends; and (iii) A-300 by PDMS-100/DMC and PDMS-1000/DMC blends. The spectral features observed using solid-state NMR spectroscopy suggest that the main surface products of the reactions of various depolymerized PDMS with pretreated nanosilica particles are the (CH₃)₃SiO-[(CH₃)₂SiO-]_x fragments. The reactions occur with the siloxane bond breakage by DMC and replacing surface hydroxyls. Changes in the chemical shifts and line widths, as shown by solid-state NMR, provide novel information on the whole structure of functionalized nanosilica particles. This study highlights the major role of solid-state NMR spectroscopy for comprehensive characterization of functionalized solid surfaces.     

Synthesis and Multinuclear NMR Study of Benzoyl Methylene Triparatolylphosphorane Ylide and the Reaction of this Ylide with Mercury(II) Halides

The reaction of the title ylide {PhCOCHP(p-tolyl)₃} with Pd(II), Pt(II). Hg(II), and Ag(I) in equimolar ratios using CH₃CN, CH₃OH, and CH₂Cl₂ as solvents have yielded [{(p-tolyl)₃PCHCOC₆H₅} PdCl₂]₂ (I), [{(p-tolyl)₃ PCHCOC₆H₅} PtCl₂]₂(2), [Hg(NO₃)₂ {(p-tolyl)₃ PCHCOC₆H₅}](3), and [Ag{(p-tolyl)₃ PCHCOC₆H₅ < eqid1 > ₂]⁺ (4). The IR, ¹H ¹³C, and ³¹P NMR together with micro analysis data of the products were obtained.     

Mechanism of interaction between hydroxypropyl cellulose and water in aqueous solutions: Importance of polymer chain length

The utilization of hydroxypropyl cellulose (HPC) can be regarded as unexpected with regard to certain applications, such as being employed as a solubility enhancer for poorly soluble drugs and as a solubilizing agent for nano-suspensions and amorphous solid dispersions. However, the best results were obtained for low-molecular weight (M_w) HPC grades with a short-chain structure. Therefore, in this study, seven grades of HPC with different polymer chain lengths (M_w) are analyzed in various aqueous solutions by a combination of ¹H quantitative NMR spectroscopy, diffusion NMR spectroscopy, and water ligand observed via gradient spectroscopy; these investigations provide insights into the remarkable solubilizing property of HPC at the molecular and supramolecular levels. Furthermore, the hydration and the water residence time are found to be strongly dependent on the polymer chain length of HPC. The quantitative results obtained herein indicate that HPCs with shorter chain lengths retain smaller amounts of water around their hydrated molecules, as compared to their counterparts with longer chain lengths.     

聚芳亚胺的合成、结构与性能

以不同的二碘化合物和芳香二胺为单体,通过两种不同的方法经缩聚反应得到了系列高分子量、低分布的聚芳亚胺。其结构由FT-IR, 1H NMR1和元素分析表征。由DSC和TG测定结果可知,该系聚合物具有较高的玻璃化转变温度(Tg＞150℃)和良好的热稳定性(TD＞400℃)。另外,该系聚合物还表现出良好的溶解性能。