Xylan hemicellulose improves chitosan hydrogel for bone tissue regeneration

The hemicellulose xylan, which has immunomodulatory effects, has been combined with chitosan to form a composite hydrogel to improve the healing of bone fractures. This thermally responsive and injectable hydrogel, which is liquid at room temperature and gels at physiological temperature, improves the response of animal host tissue compared with similar pure chitosan hydrogels in tissue engineering models. The composite hydrogel was placed in a subcutaneous model where the composite hydrogel is replaced by host tissue within 1 week, much earlier than chitosan hydrogels. A tibia fracture model in mice showed that the composite encourages major remodeling of the fracture callus in less than 4 weeks. A non‐union fracture model in rat femurs was used to demonstrate that the composite hydrogel allows bone regeneration and healing of defects that with no treatment are unhealed after 6 weeks. These results suggest that the xylan/chitosan composite hydrogel is a suitable bone graft substitute able to aid in the repair of large bone defects. Copyright © 2016 John Wiley & Sons, Ltd.     

Light,Small Angle Neutron and X-Ray Scattering from Gels

This paper gives two examples of experiments that demonstrate the power of small angle scattering techniques in the study of swollen polymer networks. First, it is shown how the partly ergodic character of these systems is directly detected by neutron spin echo experiments. The observed total field correlation function of the intensity scattered from a neutral gel allows the ergodic contribution to be directly distinguished from the non ergodic part, at values of transfer wave vector q that lie well beyond the range of dynamic light scattering. The results can be compared with those obtained at much lower q from visible light scattering. Second, a recent application of small angle X-ray (SAXS) and neutron (SANS) scattering is described for a polyelectrolyte molecule, DNA, in semi-dilute solutions under near-physiological conditions. For these observations, the divalent ion normally present, calcium, is replaced by an equivalent ion, strontium. The comparison between SANS and SAXS yields a quantitative picture of the cloud of divalent counter-ions around the central DNA core. At physiological conditions, the cloud is thinner than that predicted on the basis of the Debye screening length but thicker than if the counter-ions were condensed on the DNA chain.     

Multiscale Porosity from Thermoreversible Poly(vinylidene fluoride) Gels in Diethyl Azelate

Poly(vinylidene fluoride) (PVF₂) produces thermoreversible gels in a series of diesters. The polymer-solvent complexation occurred for intermittent number of carbon atoms n ⩾ 2 and the enthalpy of complexation increased with increasing n. The gels were dried by replacing the diesters with low boiling solvent like cyclohexane (bp. 80 °C) and methylcyclohexane (bp. 99 °C). The porosity of the dried gels was measured using Poremaster-60. For PVF₂-DEAZ gel meso and macro porosity have been observed. The former pore dimensions have been attributed for polymer-solvent complexation while the macroporosity has been attributed for caging of solvent between the PVF₂ fibrils The porosity measured from nitrogen adsorption isotherms using BJH method indicate presence of minimum pore diameter of 3.8 nm for the 10% dried gel of PVF₂.     

Photoresponsive Gels Prepared by Ring‐Opening Metathesis Polymerization

This communication describes photoresponsive gels, prepared using ring‐opening metathesis polymerization (ROMP), that dissolve upon irradiation with ultraviolet light. Exposure of mixtures of norbornene‐type ROMP monomers and new photoreactive cross‐linkers comprising two norbornene units bound through a chain containing o‐nitrobenzyl esters (NBEs) to well‐known ruthenium carbene catalysts gave cross‐linked polymer networks that swelled in organic solvents or water depending on the structure of the monomer. These gels became homogeneous upon irradiation with UV light, consistent with breaking of the cross‐links through photolysis of the NBE groups. The irradiation time required for homogenization of the gels depended on the cross‐link density and the structure of the photoresponsive cross‐linker.

     

化学药品中水分测定方法的探讨

以泰瑞米特钠为例进行水分的实验测定,涉及卡尔费休氏、干燥失重、热重分析、单晶X射线衍射、元素分析和动态水分吸附分析等方法,可引导学生加强对药物中水分的理解,培养学生对药物中水分的研究思路。     

Xylo-Oligosaccharide (XOS) Formation through Hydrothermolysis of Xylan Derived from Viscose Process

Xylo-oligosaccharides (XOS) have gained growing interest during the past decade owing to their beneficial influence on health. At the same time, a trend to a more effective utilization of biomass and biomass degradation products can be observed. As a consequence, also the steeping-lye of the viscose process is discussed as a potential source of new products based on xylans, xylooligosaccharides, xylose, and different xylose degradation products, thus being a driving force for the development of appropriate production processes. Therefore, xylan isolated from the steeping-lye was subjected to hydrothermal degradation for production of xylo-oligosaccharides (XOS). The experiments were carried out at 120, 150, and 180 °C, respectively. This hydrothermal treatment led to a soluble fraction, consisting of neutral and acidic XOS, and an insoluble residue predominantly made up of highly crystalline cellulose. A mass balance was established to calculate the activation energy for hydrothermal xylan degradation from weight loss kinetics. The degree of polymerization (DP) of the neutral product fraction could be influenced in a wide range by the reaction conditions applied. Acidic XOS were further characterized using mass spectrometry (MS). A 4-O-methylglucuronic acid residue α-(1,3)-linked to the xylose backbone was detected as a new structural element in alkaline degradation products derived from beech wood xylan.     

Multiporous Materials From Thermoreversible Poly(vinyledene fluoride) Gels

Poly(vinylidene fluoride)(PVF₂) produces thermoreversible gels with alkyl diesters of general formula (CH₂)_n (COOEt)₂ as well as with camphor, a naturally occurring ketone. These gels containing polymer-solvent intercalates yield multiporous materials when subjected to controlled solvent removal techniques. The micro and meso pores are attributed to polymer-solvent complexation while the macro pores are formed as a result of removal of the solvent trapped in the fibrillar network. PVF₂ –diethyl azelate (DEAZ, n = 6) and PVF₂ -camphor gels produce porous polymer network when dried by cyclohexane leaching. FESEM images exhibit porous network structures with fibrillar morphology. Mercury intrusion porosimetry (MIP) shows presence of pores having diameter in the range 4 nm–400µm for both the systems. The BJH pore size distribution curves for both systems confirm the presence of mesoporosity. The HK pore size distribution plots indicate that micropores are also created and it also puts evidence of single molecule solvent intercalation between the PVF₂ strands. The hysteresis between the extrusion and the intrusion curves indicates the presence of channel type/ink-bottle type structure in these systems.     

Nanoparticles Synthesis from Corn Cob (Xylan) and Their Potential Application as Colon-Specific Drug Carrier

Summary: Corn Cob based Xylan, a natural polysaccharide extracted from agro-waste may be used as a tool to deliver drugs especially to the colon because of their timely retention in the physiological environment of stomach and small intestine and can only be degraded in colon by vast anaerobic microflora like bifidobacterium. The objective of present research study is to incorporate the drug namely 5-aminosalicylic acid (5-ASA) into xylan macromolecular backbone, either by surface adsorption or by intermolecular covalent bond formation so that absorption of drugs is prevented in upper gastrointestinal tract (GIT). To achieve the above objective, xylan prodrug of 5-ASA was synthesized via activation of carboxylic acid with N,N-carbonyldiimidazole. The structure of obtained xylan prodrug was evaluated by means FT-IR spectroscopy. The ester carbonyl absorption band was observed at 1690 cm⁻¹ in addition to the bands originated from 5-ASA and xylan. The resulting prodrug and xylan itself assembled into spherical nanoparticles were analyzed by scanning electron microscopy. The prodrug of 5-ASA was synthesized which might be active against inflammatory bowel diseases, a novel thought towards advanced drug delivery from xylan based nanoparticles will be presented.     

分子凝胶:从结构调控到功能应用

作为一类典型软物质材料,近年来分子凝胶在生物医学、柔性电子设备、晶体控制生长、水体净化,以及3D打印材料、微纳米材料和高能量密度材料制备等领域表现出巨大的应用潜力,受到人们越来越多的关注。如何提高分子凝胶结构调控效率,拓展分子凝胶功能,促进分子凝胶实际应用已经成为新阶段分子凝胶研究的主要内容。本文结合本课题组的研究工作,从动态共价键调控分子凝胶力学性能、分子凝胶促进高品质有机晶体制备和高性能多孔高分子材料的分子凝胶(凝胶乳液)软膜板制备三个方面阐述分子凝胶的结构调控和功能化应用研究。在此基础上,简要展望分子凝胶研究的发展趋势。     

Characterization of the Sol-Gel Process Using Raman Spectroscopy Organically Modified Silica Gels Prepared Via the Formic Acid-Alkoxide Route

For precursor mixtures containing tetraethoxysilane (TEOS) and phenyltriethoxysilane (PhTREOS), time of gelation can be reduced by up to two orders of magnitude depending on reaction conditions employed when reacting the silicon alkoxide mixture with formic acid instead of water. Results indicate that time of gelation depends on the amount of PhTREOS in the precursor mixture. Within the range of concentrations investigated, an exponential law describes best the dependence of reduced time of gelation on the molar fraction of PhTREOS. Therefore, we conclude that the phenyl ring acts as a steric hindrance to network formation. Raman spectroscopy is used to characterize the reaction between the alkoxide mixture and formic acid. During the acidolysis reaction, ethanol is formed as an intermediate. A preliminary reaction scheme is proposed to account for the time dependence of species involved. Furthermore, Raman spectroscopy is successfully employed to monitor the effects of post-gelation thermal treatment of the gel samples. The effects observed are interpreted with a model of a phenyl ring trapped in a siloxane cage.     

Synthesis and Characterization of Vanadium-Containing ZrSiO4 Solid Solutions from Gels

A procedure is reported for the preparation of vanadium-doped zircon pigmenting system with different vanadia loadings which enabled their complete formation and further characterization. Vanadium-zircon solid solutions were prepared by gelling mixtures of ZrO₂ and V₂O₅ colloidal sols and tetraethylorthosilicate and studied over the temperature range up to the formation of zircon. The reaction sequence of gels was evaluated by X-ray powder diffraction (XRD) and ultraviolet-visible (UV-Vis) diffuse reflectance. It was found that the first crystalline phase detected was a vanadium-containing tetragonal ZrO₂ solid solution where vanadium was stabilized in the reduced V⁺⁴ state. The formation of the V-ZrSiO₄ solid solution occurred by the reaction between the monoclinic form of V⁺⁴-ZrO₂ solid solution and the amorphous silica phase. Energy dispersive X-ray microanalysis (SEM/EDX) data, measurements of lattice parameters and UV-Vis diffuse reflectance of V-ZrSiO₄ solid solutions revealed that vanadium was dissolved as V⁺⁴ replacing Si⁺⁴ in tetrahedral sites in the crystal structure of zircon. The solubility limit of vanadium in ZrSiO₄ was about 0.01 mole of vanadium per mole of zircon (0.5 wt% as V₂O₅).     

Mechanophores with a Reversible Radical System and Freezing‐Induced Mechanochemistry in Polymer Solutions and Gels

Visualization and quantitative evaluation of covalent bond scission in polymeric materials are highly important for understanding failure, fatigue, and deterioration mechanisms and improving the lifetime, durability, toughness, and reliability of the materials. The diarylbibenzofuranone‐based mechanophore radical system enabled, through electron paramagnetic resonance spectroscopy, in situ quantitative evaluation of scission of the mechanophores and estimation of mechanical energy induced along polymer chains by external forces. The coagulation of polymer solutions by freezing probably generated force but did not cleave the mechanophores. On the other hand, cross‐linking led to efficient propagation of the force of more than 80 kJ mol^?1 to some mechanophores, resulting their cleavage and generation of colored stable radicals. This mechanoprobe concept has the potential to elucidate other debated issues in the polymer field as well.     

Star Gels: New Hybrid Network Materials from Polyfunctional Single Component Precursors

New molecular precursors to inorganic/organic hybrid network materials have been designed and synthesized. The molecules comprise multiple trialkoxysilane-terminated arms linked to an organic core. When hydrolyzed, these materials form network structures whose network elements are interconnected with flexible crosslinks. Clear, compliant glasses and thick films have been generated from a number of these precursors. They are significantly tougher and less brittle than purely inorganic glasses or conventional purely organic thermosetting materials such as epoxy resins. The gels typically lose all surface-connected porosity during drying. Gelation rates for pure star gel precursors can be extremely high; the stars can also greatly enhance condensation rates for conventional sol-gel systems based on tetraalkoxysilanes.     

Diketopiperazine Gels: New Horizons from the Self-Assembly of Cyclic Dipeptides

Cyclodipeptides (CDPs) or 2,5-diketopiperazines (DKPs) can exert a variety of biological activities and display pronounced resistance against enzymatic hydrolysis as well as a propensity towards self-assembly into gels, relative to the linear-dipeptide counterparts. They have attracted great interest in a variety of fields spanning from functional materials to drug discovery. This concise review will analyze the latest advancements in their synthesis, self-assembly into gels, and their more innovative applications.     

Hybrid Gels Assembled from Fmoc–Amino Acid and Graphene Oxide with Controllable Properties

A supramolecular gel is obtained from the self‐assembly of an ultralow‐molecular‐weight gelator (N‐fluorenyl‐9‐methoxycarbonyl glutamic acid) in good and poor solvents. The gelators can self‐assemble into a lamellar structure, which can further form twisted fibers and nanotubes in the gel phase. Rheological studies show that the gels are robust and rigid, and are able to rapidly self‐recover to a gel after being destroyed by shear force. Fluorescence experiments reveal the aggregation‐induced emission effects of the gel system; the fluorescence intensity is significantly enhanced by gel formation. Graphene oxide (GO) is introduced into the system efficiently to give a hybrid material, and the interaction between gelators–GO sheets is studied. Rheological and fluorescent studies imply that the mechanical properties and the fluorescent emission of the hybrid materials can be fine‐tuned by controlling the addition of GO.     

Thermal Evolution of Hybrid Organic-Inorganic Gels Derived from Reaction of 1,4 Butanediol with Tetraethoxysilane

Transparent monolithic discs of organic-inorganic hybrid gels have been prepared by hydrolysis-condensation reactions of tetraethyl orthosilicate with 1,4 butanediol. The gels and glasses have been characterized by infrared spectroscopy and ²⁹Si MAS NMR. The characterization of the gels by infrared spectroscopy showed the incorporation of carbonaceous groups in the polymeric structure and Si–C bonding in the glasses. Pyrolysis of the gels has been studied using thermal analysis. It showed that the pyrolysis of the gels occurs in two temperature domains. The first is below 400°C due to condensation reactions and second is in the temperature range 450–550°C due to decomposition of carbonaceous groups and crosslinking. Pyrolysis of the gels at 1000°C resulted in X-ray amorphous, hard black glasses similar to oxycarbide glasses obtained by pyrolysis of siloxanes. On further heat treatment to 1400–1600°C, development of cristobalite structure and crystalline silicon carbide is observed in the otherwise amorphous black mass. The pyrolysed materials have been found to exhibit good resistance towards oxidation at 1000°C.     

Novel polyurethanes from xylan and TDI: Preparation and characterization

Xylan is a hemicellulose, which is found abundantly in nature. In this work, a novel polyurethane was developed involving xylan and tolylene-2,4-diisocyanate (TDI). Polymer synthesis was achieved through conventional heat or microwave-assisted reaction in dimethyl sulfoxide. Because xylan has multiple OH groups on each polymer chain, the TDI/xylan molar ratio had to be adjusted to produce a soluble polymeric product. The reaction products were characterized by ¹³C NMR, FTIR, thermogravimetric analysis, and differential scanning calorimetry. The xylan polyurethane was shown to exhibit improved thermal stability over xylan.     

Polymeric Multiporous Materials from Fibrillar Networks

Summary: Poly(vinylidene fluoride) (PVF₂) forms thermoreversible gels with liquid alkyl diesters as well as with camphor which is solid at room temperature. The diesters are replaced by another low boiling solvent cyclohexane by solvent exchange technique while camphor is dried just by exposing the material in vacuum to yield highly porous materials. Nano pores are generated as a result of solvent removal from polymer-solvent intercalates whereas macropores are contributed by percolation of polymer fibrils. The porosity thus created covers a wide range from 3 nm to 400 µm producing multiporous materials. Pores greater than 6 nm are measured by mercury intrusion porosimetry (MIP) and pores of diameter less than 6 nm is observed by N₂ adsorption porosimetry. The dried samples show two melting regions, low temperature hump for porous portion and high temperature peak for bulk portion. The porous materials have the ability to absorb water-soluble herbicides from around 10-ppm aqueous solution as indicated in UV spectrophotometric experiment.     

Metal–Organic Gels from Silver Nanoclusters with Aggregation‐Induced Emission and Fluorescence‐to‐Phosphorescence Switching

Luminescent metal nanoclusters (NCs) are emerging as a new class of functional materials that have rich physicochemical properties and wide potential applications. In recent years, it has been found that some metal NCs undergo aggregation‐induced emission (AIE) and an interesting fluorescence‐to‐phosphorescence (F‐P) switching in solutions. However, insights of both the AIE and the F‐P switching remain largely unknown. Now, gelation of water soluble, atomically precise Ag₉ NCs is achieved by the addition of antisolvent. Self‐assembly of Ag₉ NCs into entangled fibers was confirmed, during which AIE was observed together with an F‐P switching occurring within a narrow time scale. Structural evaluation indicates the fibers are highly ordered. The self‐assembly of Ag₉ NCs and their photoluminescent property are thermally reversible, making the metal–organic gels good candidates for luminescent ratiometric thermometers.