浓乳液双相聚合方法制备异形聚合物粒子

采用浓乳液双相聚合方法,成功制备了聚丙烯酸丁酯(PBA)的异形粒子,通过在连续相中引入聚合物隔层,大大提高了浓乳液聚合过程中的稳定性,探讨了隔层种类对浓乳液稳定性的影响,并研究了浓乳液分散相体积分数和交联剂用量对PBA粒子异形程度的影响,并结果表明,浓乳液双相聚合过程中,分散相体积分数越高,交联剂用量越高,PBA粒子的异形程度越大。     

乳液聚合法制备聚合物与十二醇复合乳胶粒

通过乳液聚合法, 以苯乙烯、丙烯酸丁酯为主要单体, 以甲基丙烯酸为功能性单体, 以二乙烯基苯或二甲基丙烯酸乙二醇酯为交联剂, 制备了包覆有十二醇的聚合物复合颗粒. 通过动态光散射粒径仪和透射电镜观测乳胶粒粒径和形态, 气相色谱法测试了十二醇的包覆率, 并探讨了聚合过程中十二醇包覆率的变化情况. 结果表明十二醇的包覆率和十二醇与单体的质量比及单体转化率显著相关, 并且在聚合过程中包覆率存在先升后降的趋势. 实验发现十二醇包覆率的先升后降是由聚合物和十二醇的相容性不好引起的.     

聚硅氧烷/甲基丙烯酸甲酯核壳结构复合粒子的制备

聚硅氧烷/甲基丙烯酸甲酯核壳结构复合粒子的制备;种子乳液聚合;核壳结构     

无皂乳液聚合法制备非球形聚苯乙烯粒子研究

采用苯乙烯(St)、二乙烯基苯(DVB)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为单体,在乙醇和水混合介质中通过无皂乳液聚合法制备了非球形聚苯乙烯(PS)粒子。通过FT-IR、TEM和激光粒度及电位分析仪对粒子的结构、形貌、粒径以及Zeta电位进行了表征。结果表明,所合成PS粒子均含三种单体结构单元,且形貌上均为非球形;随着DVB用量的增加,PS粒子形貌更趋于球形,粒径和单分散系数均逐渐增加;随DMC用量增加,PS粒子粒径随之增加,单分散系数逐渐减小,表面Zeta电位也逐渐增加;KHCO3用量的增加能使PS粒子粒径和单分散系数均增加;随着醇水比的减小,PS粒子粒径逐渐减小,而单分散系数则逐渐增加。     

Synthesis of Bowl-like Particles by Emulsion Polymerization and Release Behavior of Solvent from the Particles

Bowl-like poly (styrene-co-glycidyl methacrylate) was synthesized by swollen seeded emulsion polymerization. The polymerization was carried out in PS seed emulsion swollen by toluene, whereby the bowl-like particles formed at last. The shape was observed by SEM. These particles became ball-like when swollen by toluene, observed by optical microscope, and the release behavior of solvent from them was examined.     

核壳乳液聚合法制备含氟硅丙烯酸酯乳液

以氟醇RfCH2CH2OH和乙烯基硅氧烷VTES为原料合成的氟硅单体,与甲基丙烯酸甲酯、丙烯酸丁酯在复合乳化体系中通过核壳乳液聚合制备了稳定的氟硅共聚乳液。对氟硅单体和氟硅丙烯酸酯共聚物的结构用红外光谱进行了表征,结果表明,得到了目标单体和共聚物。共聚物的TEM形态观察发现,乳胶粒子具有明显的核壳结构,平均粒径在125 nm左右。与丙烯酸酯共聚物相比,氟硅丙烯酸酯共聚物乳胶膜的吸水率降低至8.32%,热分解温度提高了23℃,耐溶剂性与氟硅单体的含量关系不大。     

种子乳液聚合方法制备聚苯乙烯－聚硅氧烷核壳粒子

采用种子乳液聚合的方法，制备以聚苯乙烯为壳、聚有机硅氧烷为核的弹性粒子，探讨了加料和引发方式对粒子的结构及形貌的影响，并对苯乙烯种子乳液聚合的机理进行了初步的讨论。     

“Schizomorphic” Emulsion Copolymerization Particles

Cryo‐electron microscopy, atomic force microscopy, and light microscopy investigations provide experimental evidence that amphiphilic emulsion copolymerization particles change their morphology in dependence on concentration. The shape of the particles is spherical at solids content above 1%, but it changes to rod‐like, ring‐like, and web‐like structures at lower concentrations. In addition, the shape and morphology of these particles at low concentrations are not fixed but very flexible and vary with time between spheres, flexible pearl–necklace structures, and stretched rods.     

无皂乳液聚合制备高浓度单分散聚(苯乙烯-甲基丙烯酸甲酯)胶体粒子

通过添加聚乙烯醇和丙酮，找到了一种无皂乳液聚合制备高浓度单分散苯乙烯－甲基丙烯酸甲酯共聚胶体粒子的新途径，粒子半径达纳米数量级，体系的固含量大于50％，研究了聚乙烯醇和丙酮对反应过程，胶乳粒子大小的影响，结果表明聚乙烯醇和丙酮对高浓度无皂纳米胶乳粒子的形成与稳定起重要作用。     

乳液聚合法制备水分散有机硅聚合物

乳液聚合法是制备水性有机硅聚合物的最有效、最常用的方法。本文从乳液聚合所采用的有机硅单体或预聚物、乳液聚合工艺、乳液体系的稳定性等方面，论述了采用乳液聚合法合成水性有机硅聚合物领域所面临的问题及所取得的研究进展。     

Synthesis of Core-Shell Particles of Polystyrene and Poly(methyl methacrylate) Using Emulsion Photopolymerization

Summary: Submicron core-shell particles of polystyrene (PS) and polystyrene-co-poly(methyl methacrylate) (PS-co-PMMA) coated with PMMA were obtained by emulsion photopolymerization. The seeds of PS or PS-co-PMMA were prepared by emulsion polymerization with or without emulsifier and a ratio of functional monomer and crosslinker (SVBS/EDGMA) in order to obtain different surfaces for the subsequent coating with PMMA. At each stage, the evolution of the average particle size were monitored by using photon correlation spectroscopy (DLS) and the final polymer particles was analyzed via transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The core-shell morphology was identified as the increase of the average particle size in the second stage by DLS technique and by the direct observation by TEM of the differentiation between PS core and PMMA shell, and by the presence of two glass transition temperatures (T_g) as a consequence of the existence of two partially miscible phases.     

Submicron Sized Hollow Polymer Particles: Preparation and Properties

The considered method for obtaining hollow polymer particles is based on the following pathway: (1) preparation of a carboxylated core latex by emulsion copolymerization of acrylic monomers with methacrylic acid, (2) synthesis of a core-shell latex comprising a styrene (co)polymer shell, (3) neutralization of the core carboxylic groups with a base followed by the core ionization and hydration to a high degree, shell expansion and formation of water-filled hollows. A number of approaches to improve the hydrophilic core – hydrophobic shell compatibility and enlarge the hollow volume are considered. The synthesized hollow particles are of a submicron size with the relative hollow volume V_hol : V_part.= 0.43 – 0.64. Methods for cationic hollow particle latex preparation by anionic latex recharging with a cationic surfactant or acidic melamine resin are discussed. Recharging with a melamine resin is shown to afford hollow particles with an external polymer shell providing a high thermal stability of the particles.     

乳液聚合制备纳米银/聚苯乙烯核壳复合粒子

采用乳液聚合方法制备出纳米银／聚苯乙烯核壳复合粒子，并借助TEM、XPS、FTIR分析了其微观结构。研究了纳米银粒子存在下苯乙烯聚合反应转化率-时间关系，分析了纳米银／聚苯乙烯核壳复合粒子的形成机理。     

Synthesis of Anisotropic Polymer Particles with Soap‐Free Emulsion Polymerization in the Presence of a Reactive Silane Coupling Agent

A novel two step method has been developed for the preparation of anisotropic polymer particles using soap‐free emulsion polymerization in the presence of the reactive silane coupling agent 3‐methacryloxypropyltrimethoxysilane (MPTMS). In the first step, seed polymer particles were prepared in the presence of MPTMS in water. In the second step, another polymerization was conducted in the presence of the seed particles, which induced anisotropic protrusion of polymer from the seed particles. The two step method is applicable to the preparation of anisotropic polymer particles containing inorganic particles such as silica. Silica particles inside the anisotropic polymer particles were dissolved with hydrofluoric acid, which created hollow polymer particles with anisotropy.

     

碗形胶体颗粒/阵列薄膜的制备及性能研究进展

随着科学技术和应用需求的快速发展, 对胶体颗粒形貌、尺寸和组分提出了越来越高的要求, 简单组成的球形颗粒已经难以满足需求. 微/纳米碗形胶体颗粒/阵列薄膜由于具有比表面积大、结构对称性下降等特点, 在纳米反应器、药物运载、高灵敏度传感器、数据储存、自组装等方面有着广阔的应用前景, 其研究、开发和应用已经成为微／纳米材料研究领域的热点. 概述了近十年来国内外碗形胶体颗粒/碗形阵列薄膜的研究进展, 按照无机和金属、聚合物两大类分别对碗形材料的各种制备方法进行了详细介绍, 目前主要有单层胶体晶体模板法、碗形阵列薄膜模板法、诱导生长法、异形颗粒法、中空微球内陷法、种子聚合法、溶剂处理法等; 按照材质种类, 分别对TiO₂, ZnO, Fe_xO_y, 贵金属、聚合物等碗形颗粒/阵列薄膜的结构与性能研究进行了概述, 指出了其潜在的应用领域; 并进一步展望了该领域未来的发展趋势.     

微波辐射无皂乳液聚合制备聚氰基丙烯酸正丁酯微球

在微波辐射的"非致热效应"作用下,采用不含乳化剂的无皂乳液聚合,制备了聚氰基丙烯酸正丁酯(PBCA)微球。通过透射电子显微镜观察了微球的形态结构,利用激光光散射粒度测定仪测定了微球的粒径大小及其分布,探讨了柠檬酸浓度、氰基丙烯酸正丁酯(BCA)用量、微波辐射功率等对微球粒径的影响。研究结果表明,与常规无皂乳液聚合相比较,微波作用下的无皂乳液聚合反应时间缩短,得到的PBCA微球粒径更小,分散性更好。柠檬酸浓度增加,PBCA微球粒径逐渐增大;单体浓度增加,或微波功率增加,PBCA微球的粒径先减小后增大。当柠檬酸质量分数为0.005%、BCA体积分数为1.0%、微波功率为600W时,所制得的微球粒径最小,为200nm左右。     

无皂乳液聚合法合成阴离子PS微球及粒径控制

以苯乙烯(St)和丙烯酸(AA)为单体,过硫酸钾(KPS)为引发剂,采用无皂乳液聚合法合成了单分散阴离子聚苯乙烯(PS)微球,并对微球结构和影响单分散性的因素进行了研究。结果表明,AA单体也已共聚到聚合物链上,AA的加入使PS微球粒径减小,并赋予PS微球表面负电性;聚合反应的活化能为42.95kJ/mol,升高聚合温度提高了反应速率;随着KPS用量的增加,PS微球粒径减小,在用量为0.6%时呈现最好单分散性;随着反应介质中丙酮含量增加,聚合物在介质中溶解度增加,使PS微球粒径有所减小,但微球粒径分布有所变宽。     

Liquid-Crystalline Polymer Particles Prepared by Classical Polymerization Techniques

Liquid-crystalline polymer particles prepared by classical polymerization techniques are receiving increased attention as promising candidates for use in a variety of applications including micro-actuators, structurally colored objects, and absorbents. These particles have anisotropic molecular order and liquid-crystalline phases that distinguish them from conventional polymer particles. In this minireview, the preparation of liquid-crystalline polymer particles from classical suspension, (mini-)emulsion, dispersion, and precipitation polymerization reactions are discussed. The particle sizes, molecular orientations, and liquid-crystalline phases produced by each technique are summarized and compared. We conclude with a discussion of the challenges and prospects of the preparation of liquid-crystalline polymer particles by classical polymerization techniques.