Polymérisation anionique de l'isoprène: Nature de la paire d'ions et stéréospécificité. II. Influence de la nature du solvant

The present work reports some new results on the dependence between the stereospecificity of the anionic propagation of isoprene and the nature of the active centers. The stereospecificity of the propagation of macroheterobicylce separated ion pairs does not depend on the nature of the alkali counterions, and the microstructure of the polyisoprenes obtained does not differ from that of those produced by free ions. Variations in the microstructure were observed in the propagation of contact ion pairs, depending on the nature of the cation and the solvent used. These variations are likely to be related to the degree of intimacy of the contact ion pairs. There are two main factors which affect the stereospecificity of the propagations in different ways: the size of the cation and the donating power of the solvent. Finally, the external solvation of the propagation ions pairs was confirmed by the microstructure of polyisoprenes synthesized in mixed (inert + donor) solvents.     

Polymérisation anionique des diènes. IV. Contribution aux etudes des mécanismes de propagation stéréospécifique des isoprène et butadiène par les organo-alcalins

By taking into account different possible interactions between the living end, the counterion and the nature of the solvent used on the one hand, and the influence of the temperature on the kinetics and the microstructures of polydienes on the other hand, it has been possible to suggest some new explanations concerning the mechanisms of the anionic propagation of butadiene and isoprene. In hydrocarbon media, the stereospecificity of the 1,4 propagation initiated by lithium should be considered as the consequence of the coordination of the counterion by both of the two bonds of the diene molécule. The stereospecificity of the vinyl propagation by the same counterion in dioxane solvent should be the consequence of the competition between the (Li⁺, dioxane) and (Li⁺, diene) coordination complexations. In this case, the Li⁺ counterion should only be coordinated by only one of the two double bonds of the diene molecule. With isoprene, the π-electron donation should originate mainly from the C₃?C₄ double bond. The decrease of the stereospecificity is due to the increasing size of the alkali counterion and the separation or the dissociation of the growing ion-pairs.     

Polymérisation anionique des diènes. III. Etude thermodynamique de la propagation du butadiène et de i'isoprène par les organo-alcalins

The present work is concerned with the influence of the polymerization temperature on the propagation mechanisms of polyisoprenyl- and polybutadienyl-alkali metals. The thermodynamic parameters of the contact ion pairs and free ions propagations have been calculated. With Li⁺ in dioxane solvent, the vinyl propagation is stereospecific (for isoprene, the propagation is mainly 4–3). In comparison with benzene, the vinyl propagation of the polydienyl-Li contact ions pairs should be due to complexation of Li⁺ by dioxane, an electron donor having a weak dielectric constant. In general, the stereospecificity of the propagation of contact ion pairs decreases with increasing counterion size; little difference has been observed with K⁺ and Cs⁺ ion pairs in dioxane and benzene media. For isoprene, the methyl substituant should have chiefly a steric effect in the propagation of free ions, whereas it should confer a polar character to the isoprene molecule in the presence of ions pairs.     

Polymérisation anionique de i'isoprene et du butadiene en presence d'agents complexants

With the aid of DCHE and [222], solutions of sodium, potassium, rubidium, and cesium have been prepared in tetrahydrofuran (THF) and in benzene. All these new species initiate the polymerization of butadiene and isoprene avoiding the inconvenience of heterogeneous reactions. The presence of free ions and/or complexed ion pairs allows the increase of vinyl structures even in benzene.     

Polymérization anionique de l'isoprène par les insertions ternaires graphite–métal alcalin–solvant

The examination by HR–NMR of the microstructure of polyisoprenes synthesized in the presence of alkali metal–graphite compounds reveals that the polymerization has an anionic character. The microstructure of the polymers depends on the nature of the active centers, which depends on the solvent used in the preparation of the graphite compounds or as polymerization medium. With powdered alkali metal–graphite compounds, the propagation does not differ from the anionic one occurring in a homogeneous medium. Except for K–graphite, an enhancement of the 1–4 addition mode is observed if grains of Li or Na–graphite are used in mass polymerization. This change in the microstructure could be explained by the competition between the rate of propagation and the rate of diffusion of the growing chains from the grains to the homogeneous phase of the polymerization medium.     

Polymérisation anionique des diènes. VI. Microstructure des polybutadiène et polyisoprène par résonance magnétique protonique à 250 MHz et mécanismes de propagation

Analysis by 250-MHz proton magnetic resonance (PMR) allows more precise examination of the microstructure of anionic polyisoprenes and polybutadienes obtained in the presence of organo-alkali metals. Besides vinyl addition, the propagation of contact ion pairs in dioxane solvent gives a mixture of cis and trans products with isoprene, whereas only trans product is obtained with butadiene. The presence of 1,4-trans-polyisoprene appears to be inconsistent with the cis configuration of the polyisoprenyllithium living end in dioxane or tetrahydrofurane media. In taking into account the existence of complexation phenomena, it was suggested that propagation mechanisms should involve a transition state which should begin with the trans configuration before isomerization into the more stable cis configuration. For the free ions, the living end of the carbanion should be entirely trans.     

Régiospécificité et stéréosélectivité de la cycloaddition de l'oxyde de benzonitrile sur les pyrazolines-3

Pursuing our study on the cycloaddition of benzonitrile oxide with Δ₃-pyrazolines (1,2), we can now affirm that this reaction is regiospecific and stereoselective. The behaviour in acidic medium was studied. We have then discussed the process of epimerization and degradation observed according to the C₄ substituent of the bicyclic molecule and the solvent used.     

Oligomérisation anionique de l'ethylène. I. Etude cinétique

A kinetic study of ethylene oligomerization in hexane, in the presence of n-BuLi–TMEDA complexes, allowed us to suggest a new mechanism for anionic ethylene oligomerization. n-BuLi and n-Bu(CH₂CH₂)Li species have the same reactivity. The RLi–TMEDA complex in a 1-to-1 stoichiometry is the active species. The following kinetic equation has been established: It reflects the intervention of associated species (n-BuLi–TMEDA)₂ as well as the influence of the concentration of the complexing agent on the kinetics of oligomerization.     

Fonctionnalisation benzylique en série arène chrome tricarbonyle. Contrôle électronique de la régiospécificité de la réaction

The regiospecificity of the benzylic functional group of arenetricarbonylchromium cannot be explained by preferential attack at the carbon which is eclipsed by the chromium-carbonyl bond. Electronic effects in directing the regiospecificity of benzylic attack was found to predominate.     

Les anions-radicaux de l'isoprène et du butadiène intermédiaires de synthèse en chimie organique

We have synthesized a series of alkadiene and dialcohol homologs of terpenoid natural products by using anion-radicals of isoprene and butadiene. The reactions of the two monomers were initiated anionically by use of alkali metal–aromatic hydrocarbon complexes. The polymerization was stopped at the dimer stage. This method constitutes a route of synthesis for numerous organic compounds, such as alcohols and hydrocarbons.     

Oligomérisation anionique de l'ethylène. II. Etude des paramètres thermodynamiques

A kinetic study, as a function of temperature, of ethylene oligomerization by the n-BuLi–TMEDA complex allowed us to evaluate the thermodynamic parameters (ΔS^? < ?23.7 u.e.) and thus to support a transition state where the ethylene is coordinated to the lithium atom.     

Polymérisation et copolymérisation cationiques des methylindenes

A study of cationic polymerization and copolymerization of methylindenes has been carried out by experimental methods and by means of quantic chemistry. The study showed a great variation among initiators in efficiency for the various monomers. The study of the effect of temperature on polymerization was carried out for dimethyl-5,7-indene. Polymerization enthalpies and reactivity ratios were determined; the values that were obtained allowed a classification of methylindenes with regard to their reactivity toward a single cation. Total electron densities, free valences, and mobile bond orders, frontier electron densities, and superdelocalizabilities on position 1 and 2 were calculated for all methylindenes. In determining location energies of the electronic double bond in position 2 and the stabilization energies at the time of the attack by a cation, a theoretical classification of the monomers with respect to their reactivity in cationic polymerization was obtained. The agreement between calculation and experimental results is shown to be satisfactory.     

Polymérisation anionique amorcée par les composés lamellaires du graphite et du lithium

In the present work, we use the binary insertion compound LiC₁₂ to polymerize styrene, methyl methacrylate, butadiene, isoprene, and to copolymerize isoprene and styrene in various hydrocarbon solvents (aromatics and aliphatic) and etheral solvents. We show that the styrene polymerization in aromatic solvents gives better yields than in the etheral solvents, the polymer being atactic. Methyl methacrylate does not polymerize in toluene but does so completely in DME. More generally, the yields of polymerization are better with KC₃₇ than with LiC₁₂ because of the different capacities of the monomer to get into the carbon layers. The polymerization of dienes with LiC₁₂ shows that the microstructures of the polymer obtained in π-or n-donor solvents are similar to the ones obtained by homogenous polymerization with Li cation in such solvents. However, for isoprene in cyclohexane, the results are different. The isoprene styrene copolymers are statistical ones and the mean length of styrene blocks is less than 5. The monomer interaction with the insertion compound and the growing chain geometry between the carbon layers are the facts which control either the stereospecificity of the polymerization or the selectivity of the copolymerization.     

Synthèse et caractérisation du phosphate de hafnium comme échangeur d'ions

The preparation, crystalline structure, properties and behaviour of the hafnium bis (monohydrogen phosphate) monohydrate as a cationic exchanger have been studied. The crystalline product has been characterized by elemental analysis, X-ray Powder patterns, thermal analysis, photoelectron spectrometry and infra red spectroscopy. A layered structure in which the hafnium and phosphorus atoms are disposed in such a way as to form zeolitic-type cavities is suggested. The reversibility of the exchange with respect to sodium ions is discussed and can be related to the water content of the exchanger.     

Polymérisation anionique du méthacrylate de méthyle par les organo-alcalins-I : Polymérisation en milieu solvant aprotonique, étude des tacticités

Anionic polymerizations of methylmethacrylate, initiated by fluorenyl-alkali metals in ether media or in hexamethyl phosphotriamide, give syndiotactic polymers. Calculated differential entropies and enthalpies of activation between the iso- and syndiotactic placements reveal that in dioxane, tetrahydropyrane and tetrahydrofurane the syndiotacticity increases from K⁺ to Li⁺. With solvents having higher dielectric constant (such as hexamethyl phosphotriamide) or higher donating power (such as glyme 4), the tacticity of the polymers is not affected by the nature of the counter-ions.

It has been suggested that, with dioxane, tetrahydropyrane and tetrahydrofurane, the donating power is not strong enough to destroy the coordination bonds between the C=O groups of the living polymer chains and the counter-ions.     

Oligomérisation anionique de l'ethylène. III. Application à la synthèse d'alcools à longue chaine

Living oligomers of ethylene obtained by n-BuLi complexed with TMEDA have been deactivated by ethylene oxide. The nuclear magnetic resonance study of the product obtained allowed us to follow the influence of TMEDA toward the functionalization. Three products have been characterized: By increasing the ratio [TMEDA]/[n-BuLi] one obtains a decrease of the functionalization reaction.     

Polymérisation “basse pression” de l'ethylène en préasence de noir de carbone

The polymerization of ethylene with Ziegler-Natta catalysts in the presence of carbon black has shown three characteristic features both with a heterogeneous catalyst, AlBu₃? TiCl₄, and with a soluble catalyst, Cl₂Ti(C₅H₅)₂? AlEt₂Cl. They are, in order of increasing importance: reactivity of the organoaluminum derivatives with surface chemical groups of the carbon black, adsorption of a certain amount of organoaluminum compounds on the carbon black surface, and influence of the specific surface of carbon black, which controls the dispersion degree of the catalytic system. Furthermore, it was possible to obtain polyethylene by this procedure, containing different amounts and different types of carbon black.     

Sur l'Utilisation de la Stéréospécificité des Couplages Magnétiques à Longue Distance dans la Détermination des Conformations d'Aziridines Bicycliques

The study of long range coupling constants in the ¹H NMR spectra (60 MHz) of aziridines with a 7-azabicyclo[4.1.0]heptane skeleton allows the determination of the conformation of these compounds and shows that some isomers have a rigid structure.