Palladium-catalyzed regiospecific tandem allylation of 2-aminophenols using 2-butene-1,4-diol

The direct activation of C-O bonds in 2-butene-1,4-diol by palladium complexes has been accelerated by carrying out the reactions in the presence of a titanium reagent. Palladium-catalyzed regiospecific tandem allylation of 2-aminophenols with 2-butene-1,4-diol leads to 3,4-dihydro-2-vinyl-2H-1,4-benzoxazines.     

Raman-spectrum investigation of 2-butyne-1,4-diol 2-butyne-1,4-diol diacetate,and 1,4-dichloro-2-butyne

Summary 2-Butyne-1,4-diol, 2-butyne-1,4-diol diacetate, and 1,4-dichloro-2-butyne exist in cisoid and transoid forms because of the operation of factors hindering free rotation of individual groups of atoms in these molecules around the corresponding single bonds.     

Catalytic hydrogenation of 2-butyne-1,4-diol to 2-butene-1,4-diol at atmospheric pressure in the liquid phase

Selective hydrogenation of 2-butyne-1,4-diol to 2-butene-1,4-diol on suspended palladium and Raney nickel catalysts at atmospheric pressure was studied. The optimal parameters of this reaction were determined. Samples containing 90% 2-butene-1,4-diol were prepared.     

Analysis of products from hydrogenation of 2-butyne-1,4-diol

Conclusions A qualitative and quantitative method has been developed for analysis of a mixture of butane-1,4-diol, cis-2-butene-1,4-diol, trans-2-butene-1,4-diol, and 2-butyne-1,4-diol in the form of their diacetates by gas chromatography.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 942–944, April, 1970.     

Resolution of C2-symmetric 2,3-diphenylbutane-1,4-diol and purification of diastereomeric 1,4-diphenylbutane-1,4-diol using (S)-proline and boric acid

Racemic 2,3-diphenylbutane-1,4-diol (±)-1 is resolved to obtain the corresponding (R,R)-isomer in 98% e.e. through reaction with (S)-proline and boric acid. Partially resolved (R,R)-(−)-1 and (S,S)-(+)-1 have been enriched to obtain samples of 95 and 97% e.e. through reaction with (S)-proline and boric acid. Diastereomeric 1,4-diphenylbutane-1,4-diol 2 has been purified to obtain the (R,R)-isomer in 98% e.e. using (S)-proline and boric acid.     

A chemical study of 2-butyne-1,4-diol

Commercial grade 2-butyne-1,4-diol has been used in electroplating for several years. In laboratory experiments, its presence in the electrolyte increases the current efficiency of zinc electro-winning. Its chemical behaviour in solution is not well known. The present paper indicates that the brownish technical grade 2-butyne-1,4-diol contains the monomer, the dimer and some trimer. Pure monomeric 2-butyne-1,4-diol is a white solid obtained by evaporation of the technical grade product. The monomer is slowly transformed into dimer and possibly into a trimer when dissolved in water. Various analytical techniques were used in the study of this system. Factor analysis with column cross-validation was applied to chromatographic data to help in the resolution of the system.     

Facile Synthesis of 2-Substituted cis-2-cyclopentene-1,4-diol Derivatives

2-Substituted cis-2-cyclopentene-1,4-diol derivatives are used as starting materials for prostaglandin synthesis¹. Two papers concerning the synthesis of these compounds have been published so far ^1,2. In this paper we would like to present an alternative method for synthesis of 2-substituted cis-2-cyclopen-tene-1,4-diols from easily available cis-2-cyclopentene-1, 4-diol diacetate 1 ³.     

Potentialities of the Voltammetry of 2-Butyne-1,4-diol at Mechanically Renewed Solid Electrodes

The electrochemical behavior of 2-butyne-1,4-diol was studied at solid platinum, gold, silver, cobalt, nickel, copper, and graphite electrodes. The working surfaces of the electrodes were renewed by cutting a thin 0.5-µm layer in the test solution immediately before recording every voltammogram. 2-Butyne-1,4-diol was oxidized in alkaline solutions at graphite, nickel, silver, and copper electrodes at positive potentials; the voltammograms obtained at these electrodes were suitable for analytical purposes. The dependence of the anodic current of 2-butyne-1,4-diol on its concentration was linear in the range from 0.03 to 0.3 g/L.__________Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 5, 2005, pp. 499–503.Original Russian Text Copyright © 2005 by Skvortsova, Aleksandrova, Kiryushov.     

纳米Pd的形貌和尺寸可控制备及其1,4-丁炔二醇加氢性能

采用化学还原法合成Pd纳米立方体,并将其作为晶种,进一步合成大尺寸的纳米Pd立方体以及具有不同{100}和{111}晶面比例的纳米Pd多面体.将形貌和尺寸可控的纳米Pd溶胶应用于1,4-丁炔二醇催化加氢的反应中,反应结果表明,纳米Pd的催化性能取决于其尺寸和形貌.{111}晶面的催化活性高于{100}晶面,PVP稳定的Pd胶体对1,4-丁烯二醇均具有较高选择性,具有适当{100}和{111}晶面比例的纳米Pd多面体对1,4-丁烯二醇的选择性可达96%.     

Liquid-phase catalytic hydrogenation of 2-butyne-1,4-diol to 1,4-butanediol at atmospheric pressure on suspended catalysts

The optimum parameters of hydrogenation of 2-butyne-1,4-diol to 1,4-butanediol on the suspended palladium and Ni-Raney catalysts at atmospheric pressure were found. In selected conditions a yield up to 90% of 1,4-butanediol was reached.     

Preparation of 2-iodo allylic alcohols from 2-butyn-1,4-diol

The conversion of 2-butyn-1,4-diol to (Z)-2,4-diiodobut-2-en-1-ol proceeded efficiently using in situ generated trimethylsilyl iodide. Coupling with Grignard reagents and other nucleophiles delivered (2Z)-2-iodo allylic alcohols. The geometry of the products was established by nOe.     

Chiral crystallization of cis-2,3-dichloro-buth-2-ene-1,4-diol

The X-ray diffraction study of cis-2,3-dichlorobuth-2-ene-1,4-diol (3) obtained by the reduction of 3,4-dichloro-5-ethoxy- and 5-isopropoxi-2(5H)-furanones with lithium aluminum hydride is performed. The crystals of compound 3 are trigonal: a = b = 15.746(9) Å, c = 6.848(4) Å; V = 1470.5(15) ų, space group P3₁, Z = 9 (three independent molecules). Independent molecules have identical planar conformation, and hydroxyl groups are located on different sides of the multiple bond plane. The supramolecular motif of the crystal is spirals about the threefold screw axes; the neighboring spirals are linked by OH…O hydrogen bonds.     

Rearrangement of 2-butyne-1,4-diol to butyrolactone catalyzed by ruthenium complexes

The isomerization of 2-butyne-1,4-diol to butyrolactone catalysed by ruthenium complexes is described.     

Procedures for recovery of crystalline 2-butyne-1,4-diol from industrial aqueous solutions and for its purification

Four procedures for recovery of crystalline 2-butyne-1,4-diol from aqueous solutions and for its purification were examined. Samples of crystalline 2-butyne-1,4-diol containing 98.5 to 99.9 wt % target product were obtained.     

Polycondensation of butenediol: synthesis of telechelic 2-butene-1,4-diol oligomers

The catalytic condensation of cis-2-butene-1,4-diol with CpRu(MQA)(C(3)H(5)) (Cp = cyclopentadienyl, MQA = 4-methoxyquinoline-2-carboxylate) generates poly(2-butenediol), an unsaturated telechelic polyether diol with molecular weights between 400 and 4600 g/mol. This Ru(IV) allyl catalyst enchains 2-butene-1,4-diol primarily as the linear trans-2-butenyl ether (92%) along with vinyl branches (8%). These telechelic oligomers are useful chain extenders and macromonomers, as demonstrated by their use in the synthesis of poly(lactide)-b-poly(butenediol)-b-poly(lactide) triblock copolymers. Model studies support a proposed mechanism involving the formation of Ru(IV) allyl intermediates from allylic alcohols and chain growth by selective nucleophilic displacement at the terminus of the Ru(IV) allyl to generate trans-2-butenyl ether linkages.     

Seven-membered acetals based on cis-2,3-Dichloro-2-butene-1,4-diol

cis-2,3-Dichloro-2-butene-1,4-diol was obtained by reduction of dichloromaleic anhydride with lithium aluminum hydride. Condensation of the diol with carbonyl compounds leads to seven-membered unsaturated acetals, viz., 5,6-dichloro-1,3-dioxa-5-cycloheptenes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 19–21, January, 1980.     

Enthalpic changes on mixing two couples of S- and R-enantiomers of heptane-2-ol, octane-2-ol, nonane-2-ol, 3-chloro-propane-1,2-diol, 2-methyl-1,4-butanediol at 298.15 K

Enthalpies of mixing of (R)- and (S)-enantiomers of liquid chiral compounds such as heptane-2-ol, octane-2-ol, nonane-2-ol, 3-chloro-propane-1,2-diol and 2-methyl-1,4-butanediol have been measured over a range of mole fractions at 298.15 K, albeit very small values. Mixing of heterochiral liquids of heptane-2-ol, octane-2-ol, nonane-2-ol, 3-chloro-propane-1,2-diol, realized enthalpic destabilization over the whole range of mole fractions, whereas that of 2-methyl-1,4-butanediol realized enthalpic stabilization over entire compositions. The maximum values of enthalpies of mixing and the intermolecular interaction of cohesive energy density and entropy of vaporization showed a linear correlation except for the compounds having two chiral centers and others.     

Cyclodehydration of cis-2-butene-1,4-diol with active methylene compounds catalyzed by a diphosphinidenecyclobutene-coordinated palladium complex

(π-Allyl)palladium triflate coordinated with 1,2-bis(4-methoxyphenyl)-3,4-bis(2,4,6-tri-t-butylphenylphosphinidene)cyclobutene (DPCB-OMe), [Pd(η³-C₃H₅)(DPCB-OMe)]OTf, efficiently catalyzes cyclodehydration of cis-2-butene-1,4-diol with active methylene compounds such as acetylacetone and ethyl acetoacetate in toluene in the presence of pyridine. The reactions can be performed in air, giving 2-vinyl-2,3-dihydrofurans in good to high yields.     

Synthesis of pyrrolidine and other heterocycles from bu tane-1,4-diol and ethane-1,2-diol

The amination reactions of butane-1,4-diol and ethane-1,2-diol on seven different catalysts obtained by modifying a natural alumosilicate — gumbrin — and a natural zeolite — analcite -with iron and chromium salts, and also by activation with sulfuric acid, have been investigated. The maximum yield of pyrrolidine was obtained in the presence of a catalyst containing ferric oxide on gumbrin.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 937–941, July, 1973.     

A novel,high-yielding approach to a chiral inducer: (2R,3R)-1,4-dimethoxy-1,1,4,4-tetraphenylbutane-2,3-diol

A new method for preparing (2R,3R)-1,4-dimethoxy-1,1,4,4-tetraphenylbutane-2,3-diol in high yield based on selective 2,3-spiroboration of (2R,3R)-1,1,4,4-tetraphenylbutanetetraol has been developed. It avoids traditional oxidation and reduction steps, and provides a simplified, more straightforward, and high-yielding synthesis of the title compound.