纳米碳酸钙的表面改性研究

纳米产品(材料)是当今世界高科技产品之一.纳米碳酸钙作为粉体产品中的一种,以高纯、超细、改性和功能性为标志,广泛应用于橡胶、塑料、造纸、油墨、涂料、医药、化妆品等各行各业[1-2].主要用作填充材料,因粒度超细、分散性好,可以增加填充量,降低制品成本,改善制品性能,提高制品档次,拓宽制品使用范围.近年来,随着CaCO3的超细化、结构复杂化及表面改性技术的发展,极大地提高了它的应用价值.对不同形态的超细CaCO3制备技术的研究,已成为许多先进国家竞相开发的热点[3-5].     

Modified silica precipitated in the medium of organic solvents — an active rubber filler

Studies were performed on application of highly dispersed silicas, specially obtained in organic solvent medium, to processing of elastomers. Particular attention was paid to silica surface modification and to estimation of an extent of the surface modification. To this aim, near infrared techniques were used and heat effects associated with surface wetting with water and benzene were estimated. Application studies were also conducted on the use of modified silicas in butadiene-styrene rubber.     

Surface modification of calcium sulfate whisker using thiol-ene click reaction and its application in reinforced silicone rubber

The hemihydrate calcium sulfate whisker (HCSW) was modified by γ-(methacryloxy)propyl trimethoxy silane (KH570) and trimethylolpropane tris(3-mercaptopropionate) via wet modification and thiol-ene click reaction, and then the unmodified and modified HCSW were added into α, ω-dihydroxy polysiloxane (DPS) matrix to prepare silicon rubber composites. After the dual-surface modification, the surface of HCSW was transformed to hydrophobic, the hydration of whisker was obviously improved, and the whisker dispersed more evenly in the polymer. The mechanical properties, dynamic mechanical properties, and the medium resistance of the silicone rubber composite were compared. The tensile test shows that the silicone rubber shows better mechanical properties after adding the modified whiskers, among which HCSW-KH570-SH has the most significant reinforcement effect. Moreover, DPS/HCSW-KH570-SH shows the best medium resistance in toluene, gasoline, and water. The addition of modified whiskers can improve the storage modulus of silicone rubber significantly, while DMA and DSC show that the addition of modified whiskers can reduce the glass transition temperature of silicone rubber. The bound rubber indicates that the interface interaction between HCSW-KH570-SH and silicone rubber is the best.     

Surface modification of highly dispersed rubber fillers and pigments by titanate proadhesive and hydrophobic compounds

A method of modifying silicate and carbonate fillers with titanate coupling agents and proadhesive agents was worked out. The modification aimed at hydrophobization of filler surface by introduction to the surface of functional groups with chemical affinity to polymers. Optimum amounts of modifying substances and appropriate conditions for performing the modification process were established. The obtained fillers showed a high degree of hydrophobicity.The modified fillers were applied in rubber mixtures based on butadienestyrene or natural rubber, in polyurethanes, in PVC, and as pigments in oil dyes of high corossive resistance.     

The modified talcs as semi-active fillers of rubbers

We present a new modification method to additonally micronize talcs to a particle diameter of 0.8 m using silane and titanate coupling agents, thus allowing an increase of acitvity against elastomers. It appears that the silane modification proceeds in greater extent when acid medium is used. After the modifications, the wettability of talcs in water and benzene was measured by the calorimetric technique. A direct correlation between heats of immersionh _i ^W andh _i ^B of silane (titanate) surface coverage has also been found.     

Thermal behaviors of amorphous calcium carbonates prepared in aqueous and ethanol media

Two different samples of amorphous calcium carbonate (ACC) hydrates were prepared respectively by mixing aqueous solutions of CaCl₂ and Na₂CO₃-NaOH and by allowing the diffusion of (NH₄)₂CO₃ sublimate into ethanol solution of CaCl₂. Thermal behaviors of the synthetic ACCs were investigated comparatively by means of thermoanalytical techniques complimented by powder X-ray diffraction, FTIR spectrometry and microscopic observations. The anhydrous ACCs produced by the thermal dehydration of the respective samples were crystallized to calcite in different ways. The sample prepared in aqueous medium was crystallized at around 600 K in a single step. Crystallization in two separated steps at around 600 and 825 K was observed for the sample prepared in ethanol medium. Characteristics of the crystallization processes were discussed from thermodynamic and kinetic points of view.     

Modification estimate of kaolin,chalk, and precipitated calcium carbonate as plastomer and elastomer fillers

Investigation into possible modifications of surfaces of white fillers such as Kornica chalk, precipitated calcium carbonate and KOG Kaolin. The surfaces of these fillers were modified with a variety of proadhesive compounds in different amounts. Optimum proadhesive compound was determined for each kind of filler. The modified fillers were tested in rubber mixtures based on butadiene-styrene rubber and in polyurethanes.     

An unusual isotopic fractionation of boron in synthetic calcium carbonate precipitated from seawater and saline water

Inorganic calcium carbonate precipitation from natural seawater and saline water at various pH values was carried out experimentally. The results show the clear positive relationships between boron concentration and δ11B of inorganic calcium carbonate with the pH of natural seawater and saline water. However, the variations of boron isotopic fractionation between inorganic calcite and seawater/saline water with pH are inconsistent with the hypothesis that B(OH)4- is the dominant spe-cies incorporated into the biogenic calcite structure. The isotopic fractionation factors α between synthetic calcium carbonate precipitate and parent solutions increase systematically as pH increases, from 0.9884 at pH 7.60 to 1.0072 at pH 8.60 for seawater and from 0.9826 at pH 7.60 to 1.0178 at pH 8.75 for saline water. An unusual boron isotopic fractionation factor of larger than 1 in synthetic calcium carbonate precipitated from seawater/saline water at higher pH is observed, which implies that a substantial amount of the isotopically heavier B(OH)3 species must be incorporated preferentially into synthetic inorganic carbonate. The results propose that the incorporation of B(OH)3 is attributed to the formation of Mg(OH)2 at higher pH of calcifying microenvironment during the synthetic calcium carbonate precipitation. The preliminary experiment of Mg(OH)2 precipitated from artificial seawater shows that heavier 11B is enriched in Mg(OH)2 precipitation, which suggests that isotopically heavier B(OH)3 species incorporated preferentially into Mg(OH)2 precipitation. This result cannot be applied to explain the boron isotopic fractionation of marine bio-carbonate because of the possibility that the unusual environment in this study appears in formation of marine bio-carbonate is infinitesimal. We, however, must pay more attention to this phenomenon observed in this study, which accidentally appears in especially natural environment.     

丁腈橡胶的XeF2表面氟化改性研究

丁腈橡胶表面经ＸｅＦ２处理后，介质性能有显著的提高，摩擦系数降低６～８倍．用ＸＰＳ法研究了氟化处理的丁腈橡胶表面结构，并用曲线拟合分峰技术对Ｃ１ｓ谱进行数学处理．结果表明，随着氟化时间延长，橡胶表面氢被氟取代逐步生成—ＣＨ２—ＣＨＦ—ＣＨ２—、—ＣＨＦ—ＣＨ２—ＣＨＦ—和—ＣＨＦ—ＣＨＦ—ＣＨＦ—等．ＳＥＭ照片显示氟化膜厚度可达８～９μｍ．     

Synthesis of a fluoro-diol and preparation of fluorinated waterborne polyurethanes with high elongation at break

In this study, a fluoro-diol, trifluoroethyl-2-methylpropanoate-β-dihydroxy ethylamine (TFMDA), was successfully synthesized by Michael Addition reaction between trifluoroethyl-2-methacrylate (TFEMA) and diethanolamine (DEA). The chemical structures were characterized by FT-IR and ¹H NMR methods. And then by the reaction of dicyclohexylmethylmethane-4,4′- diisocyanate (HMDI), poly(propylene glycol) (PPG), 2,2-dimethylolbutanoic acid (DMBA), diethylene glycol (DEG) and trifluoroethyl-2-methylpropanoate-β-dihydroxyethylamine (TFMDA), fluorinated waterborne polyurethane emulsions with different content of COOH and TFMDA were successfully prepared. It was demonstrated that all the polyurethane emulsions exhibited enhanced storage stability and all the polyurethane films possessed high elongation at break and exceeded 1000%. Addition of organic fluorine obviously improved the water-resistance property of the waterborne polyurethane films.     

Surface and interface study of ZnO nanoparticles modified by octadecanol phosphate

In this paper, we describe an effective method in which ZnO nanoparticles were prepared through the rapid precipitation transformation reaction in aqueous solution of ZnSO₄ and NaOH with octadecanol phosphate (ODP) as a modifying agent. From the study on the surface and the interface, ZnO nanoparticles modified by ODP exhibited small size, pore structure, good dispersion, and hydrophobicity. The wide variety of surface wettability can be achieved by changing the preparation parameters. The research offers a simple and effective approach to prepare ZnO filler in mild condition and enhances interfacial compatibility between ZnO powders and matrixes by treating the surface with certain capping molecules. Copyright © 2010 John Wiley & Sons, Ltd.     

Realignment of Nanocrystal Aggregates into Single Crystals as a Result of Inherent Surface Stress

Crystallization by particle attachment is widely observed in both natural and synthetic environments. Although this form of nonclassical crystallization is generally described by oriented attachment, random aggregation of building blocks to give single‐crystal products is also observed, but the mechanism of crystallographic realignment is unknown. We herein reveal that random attachment during aggregation‐based growth initially produces a nonoriented growth front. Subsequent evolution of the orientation is driven by the inherent surface stress applied by the disordered surface layer and results in single‐crystal formation by grain‐boundary migration. This mechanism is corroborated by measurements of orientation rate versus external stress, which demonstrated a predictive relationship between the two. These findings advance our understandings about aggregation‐based growth via nanocrystal blocks and suggest an approach to material synthesis that takes advantage of stress‐induced coalignment.     

Thermal stability of wüstite structure modified with calcium cations

Wüstite modified with calcium cations was prepared by high temperature fusion. M?ssbauer spectroscopy and X-ray diffraction were employed to identify wüstite phases before and after thermal treatment at elevated temperatures in vacuum with a base pressure of 1.33 Pa for 60 h. Experimental results demonstrated that the location of calcium cations inside the wüstite structure could prevent disproportionation into magnetite and α-iron. This revised version was published online in August 2006 with corrections to the Cover Date.     

Fluoroalkyl end‐capped oligomers possessing nonflammable characteristic in calcium carbonate nanocomposites

Calcium chloride reacted with sodium carbonate in the presence of a variety of fluoroalkyl end‐capped oligomers such as fluoroalkyl end‐capped acrylic acid oligomer (R_F‐[ACA]_n‐R_F), 2‐methacryloyloxyethanesulfonic acid oligomer (R_F‐[MES]_n‐R_F), N,N‐dimethylacrylamide oligomer (R_F‐[DMAA]_n‐R_F) and acryloylmorpholine oligomer (R_F‐[ACMO]_n‐R_F) to afford the corresponding fluorinated oligomers/calcium carbonate composites. Each fluorinated oligomer/calcium carbonate composite thus obtained is nanometer size‐controlled very fine particles (25–114 nm) possessing a good dispersibility and stability in a variety of solvents including water. Thermal stability of these fluorinated calcium carbonate nanocomposites was studied by thermogravimetic analyses measurements. Fluorinated oligomes, in which the theoretical oligomer content in the composites is 19%, were able to give no weight loss corresponding to the content of oligomer in each case even after calcination at 800 °C. On the other hand, a slight weight loss corresponding to the contents of oligomers in the composites after calcination at 800 °C was observed in R_F‐(MES)_n‐R_F/, R_F‐(DMAA)_n‐R_F/ and R_F‐(ACMO)_n‐R_F/calcium carbonate nanocomposites, in which the theoretical contents of the oligomers were 36–53%, although R_F‐(ACA)_n‐R_F/calcium carbonate nanocomposites gave a clear weight loss corresponding to the contents of oligomer under similar conditions. Fluorinated oligomers/calcium carbonate nanocomposites possessing no weight loss at 800 °C were applied to the surface modification of poly(methyl methacrylate) (PMMA) to exhibit a good oleophobicity imparted by fluorines on the surfaces. Interestingly, these fluorinated calcium carbonate nanocomposites after calcination at 800 °C were found to exhibit the similar oleophobic characteristic on the modified PMMA surfaces as well as that of the nanocomposites before calcination. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface characterization and electrical property of carbon fibers modified by air oxidation

Polyacrylonitrile‐based carbon fibers were modified by oxidation in air, and a systematic study of surface groups and surface resistance at different treated temperatures was made. Progressive fiber weight loss occurred with increasing extents of air oxidation, and it was approximately proportional to the extent of air oxidation from the onset of oxidation up to 400 °C. At this point 4.4% of the initial fiber weight had been lost. A faster loss of weight occurred as the extent of air oxidation increased from 400 °C to 700 °C. X‐ray photoelectron spectroscopy studies (C 1s and O 1s) indicated that the oxygen/carbon atomic ratio rose rapidly from 2.64% (as‐received carbon fiber) to 42.83% as the oxidation temperature was increased to 400 °C. Fourier transform infrared spectra showed the relative intensity of the peaks at about 3440 cm^?1 from ―OH stretching vibrations and at 1634 cm^?1 from ―C?O stretching vibrations increased significantly at 400 °C. FESEM micrographs showed that as‐received fibers show relatively smooth surface. With oxidation temperature increasing, the fiber surface was rougher. The surface resistance of treated carbon fibers decreased obviously with increasing oxidation temperatures. The most decrease was about 100% at 400 °C. Copyright © 2014 John Wiley & Sons, Ltd.     

Effects of the degree of surface modification on the rheological responses of precipitated silica suspensions in benzyl alcohol

Two types of precipitated silica powders modified by poly (dimethylsiloxane) (PDMS) were suspended in benzyl alcohol and their rheological properties were investigated as a function of silica volume fraction, φ. The suspensions were classified into sol, pre-gel, and gel states based on the increase in φ. An increase in the degree of surface modification by PDMS caused gelation at higher φ. Plots of apparent shear viscosity against shear rate in the sol and pre-gel states of highly modified silica suspensions showed weak shear thickening behavior, while the same plots for silica suspensions with a low modification level exhibited shear thinning behavior. The dynamic moduli of hydrophobic suspensions in the pre-gel and gel states were dependent on the surface modification: the storage modulus G′ was larger than the loss modulus G″ in the linear region and these moduli increased with increasing φ, irrespective of the silica powder. The linear region of the φ range for the precipitated silica suspensions was wider than that for the fumed silica powders modified by PDMS suspended in benzyl alcohol, while the G′ value in the linear region for the precipitated silica suspensions was less than those for the fumed silica suspensions.     

聚丙烯酸包覆超细碳酸钙的机理和表面性质研究

以丙烯酸单体,低分子量、高分子量聚丙烯酸为表面处理剂对超细碳酸钙进行 表面处理 ,探讨了样品的包覆效率与处理剂的化学性质、处理的方法、条件及用量 的关系。样品溶解曲线的差异表明处理剂的分子结构及性质可能导致其在碳酸钙表 面的取向和排列方式的不同。这在XPS和IGC的分析中也得到了体现和佐证。从样品 溶解曲线,O/Ca和C~(290)/Ca摩尔比和估算得到的单分子层包覆量都较为一致,约 为0.6%左右。并初步解释了聚丙烯酸与碳酸钙表面相互作用的机理。     

Fabrication and characterization of composites composed of a bioresorbable polyester matrix and surface modified calcium carbonate whisker for bone regeneration

This work aims to evaluate the potential of a bioresorbable composite as material for bone regeneration. Surface‐modified calcium carbonate whiskers (CCWs) were prepared by grafting of ethylene glycol (EG) using 1,6‐hexamethylene diisocyanate as coupling agent, followed by ring‐opening polymerization of l ‐lactide initiated by the hydroxyl group of EG. The resulting PLLA‐EG‐g‐CCW was used as filler to reinforce a bioresorbable terpolymer, poly(l ‐lactide‐co‐trimethylene carbonate‐co‐glycolide) (PLTG). The mechanical properties and thermal stability of the PLTG/PLLA‐EG‐g‐CCW composites were greatly improved. Compared with neat PLTG, a 39.3% increase in tensile strength and 26.7% increase in elongation at break were obtained for the composite with 2 wt% PLLA‐EG‐g‐CCW filler. This was assigned to the reinforcement effect of evenly dispersed PLLA‐EG‐g‐CCW in the polymeric matrix. In fact, entanglement of PLLA grafts at the surface of PLLA‐EG‐g‐CCW with PLTG chains results in a homogeneous distribution of the filler in the matrix. Thus, the composites are simultaneously strengthened and toughened. The cytocompatibility of the materials was evaluated from cell morphology and 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay using L929 mouse fibroblast cell line. The results indicate that the composite presents very low cytotoxicity. Copyright © 2017 John Wiley & Sons, Ltd.     

Effect of the Amount of Calcium Carbonate as Filler on the Rheological and Adhesion Properties of a Water-Based Polyurethane Dispersion

In this study, the properties of water-based adhesives based on a polyurethane ionomer (PUD) and a micronised CaCO₃ as filler was analysed. Different amounts of a micronised CaCO₃ (5-25 wt%) were added to water-based polyurethane (PUD) adhesive formulations in order to reduce its relatively high cost. The addition of a micronised calcium carbonate filler increased the viscosity, the storage and loss moduli of the PUD adhesives, and imparted pseudoplasticity and thixotropy, more noticeably for the adhesive with the highest calcium carbonate content. The creation of acid-base interactions seemed to be responsible for the improvement in the rheological properties of the PUD adhesives containing CaCO₃ as filler. On the other hand, the addition of CaCO₃ filler might deteriorate the adhesion properties to PUD adhesives.