Phytase Production by a Marine Yeast <Emphasis Type="Italic">Kodamea ohmeri</Emphasis> BG3

The marine yeast strain Kodamea ohmeri BG3 isolated from the gut of a marine fish (Hexagrammes otakii) was found to secrete a large amount of phytase into the medium. The crude phytase produced by this marine yeast showed the highest activity at pH 5.0 and 65 °C. The optimal medium for phytase production contained oat 10.0 g/l, ammonium sulfate 15.0 g/l, glucose 30 g/l, and NaCl 20.0 g/l, while the optimal cultivation conditions for phytase production were pH 5.0, a temperature of 28 °C, and a shaking speed of 170 rpm. Under the optimal conditions, over 557.9 mU/ml of phytase activity was produced within 72 h of fermentation at the shake flask level. This is a very high level of phytase activity produced by yeasts. We think that the medium and process for phytase production by the marine yeast strain were very simple, and such marine yeast from the gut of natural marine fish may have a potential application in the maricultural industry and marine environmental protection. The results demonstrate that phytate was actively degraded by the crude phytase within a short period.     

Characterization of Thermo-stable Endoinulinase from a New Strain <Emphasis Type="Italic">Bacillus Smithii</Emphasis> T7

A new thermophilic inulinase-producing strain, which grows optimally at 60 °C, was isolated from soil samples with medium containing inulin as a sole carbon source. It was identified as a Bacillus smithii by analysis of 16s rDNA. Maximum inulinase yield of 135.2 IU/ml was achieved with medium pH7.0, containing inulin 2.0%, (NH₄)H₂PO₄ 0.5%, yeast extract 0.5%, at 50 °C 200 rpm shaker for 72-h incubation. The purified inulinase from the extracellular extract of B. smithii T7 shows endoinulinolytic activity. The optimum pH for this endoinulinase is 4.5 and stable at pH range of 4.0–8.0. The optimum temperature for enzyme activity was 70 °C, the half life of the endoinulinase is 9 h and 2.5 h at 70 °C and 80 °C respectively. Comparatively lower Michaelis–Menten constant (4.17 mM) and higher maximum reaction velocity (833 IU/mg protein) demonstrate the endoinulinase’s greater affinity for inulin substrate. These findings are significant for its potential industrial application.     

Microcalorimetric investigation of the effect of berberine alkaloids from <Emphasis Type="Italic">Coptis chinensis</Emphasis> Franch on <Emphasis Type="Italic">Staphylococcus aureus</Emphasis> growth

The inhibitory effects of three berberine alkaloids (BAs) from rhizome of Coptis chinensis Franch, a traditional Chinese medicinal (TCM) herb, on Staphylococcus aureus growth were investigated by microcalorimetry. The power-time curves of S. aureus with and without BAs were acquired; meanwhile the extent and duration of inhibitory effects on the metabolism were evaluated by studying the growth rate constant (k), half inhibitory ratio (IC₅₀), maximum heat-output power (P _max), peak time of maximum heat-output power (t _p) and total heat production (Q _t). The value of k of S. aureus in the presence of the three BAs decreased with the increasing concentrations of BAs. Moreover, P _max was reduced and the value of t _p increased with increasing concentrations of the three drugs. The inhibitory activity varied with different drugs. The values of IC₅₀ of the three BAs are respectively, 101.4 μg/mL for berberine, 241.0 μg/mL for palmatine and 792.3 μg/mL for jateorrhizine. The sequence of antimicrobial activity of the three BAs is: berberine > palmatine > jateorrhizine. It is suggested that the functional group methylenedioxy or methoxyl at C2 on the phenyl ring could possibly improve antimicrobial activity more strongly than hydroxyl at C2 on the phenyl ring. Supported by the National Natural Science Foundation of China (Grant No. 30625042)     

Purification and Characterization of Thermostable Chitinase from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> SK-1

Chitinase was purified from the culture medium of Bacillus licheniformis SK-1 by colloidal chitin affinity adsorption followed by diethylamino ethanol-cellulose column chromatography. The purified enzyme showed a single band on sodium dodecyl sulfate polyacrylamide gel electrophoresis. The molecular size and pI of chitinase 72 (Chi72) were 72 kDa and 4.62 (Chi72) kDa, respectively. The purified chitinase revealed two activity optima at pH 6 and 8 when colloidal chitin was used as substrate. The enzyme exhibited activity in broad temperature range, from 40 to 70°C, with optimum at 55°C. It was stable for 2 h at temperatures below 60°C and stable over a broad pH range of 4.0–9.0 for 24 h. The apparent K _m and V _max of Chi72 for colloidal chitin were 0.23 mg ml⁻¹ and 7.03 U/mg, respectively. The chitinase activity was high on colloidal chitin, regenerated chitin, partially N-acetylated chitin, and chitosan. N-bromosuccinamide completely inhibited the enzyme activity. This enzyme should be a good candidate for applications in the recycling of chitin waste.     

Characterization of Rhamnolipid Produced by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> Isolate Bs20

Rhamnolipid produced by Pseudomonas aeruginosa isolate Bs20 is viscous sticky oily yellowish brown liquid with a fruity odor. It showed solubility at aqueous pH > 4 with optimum solubility at pH 7–7.5 and freely soluble in ethyl acetate. This biosurfactant has a very high surface activity as it could lower the surface tension of water to 30 mN/m at about 13.4 mg/L, and it exhibited excellent stabilities at high temperatures (heating at 100°C for 1 h and autoclaving at 121°C for 10 min), salinities (up to 6% NaCl), and pH values (up to pH 13). The produced biosurfactant can be used in the crude form either as cell-free or cell-containing culture broth of the grown bacteria, since both preparations showed high emulsification indices ranged between 59% and 66% against kerosene, diesel, and motor oil. These characters make the test rhamnolipid a potential candidate for use in bioremediation of hydrocarbon-contaminated sites or in the petroleum industry. High-performance thin-layer chromatography densitometry revealed that the extracted rhamnolipid contained the two most active rhamnolipid homologues dirhamno dilipidic rhamnolipid and monorhamno dilipidic rhamnolipid at 44% and 56%, respectively, as compared to 51% and 29.5%, respectively, in a standard rhamnolipid preparation. The nature and ratio of these two rhamnolipid homologues showed to be strain dependent rather than medium-component dependent.     

Lipids from <Emphasis Type="Italic">Halostachys caspica</Emphasis> and <Emphasis Type="Italic">Halocharis hispida</Emphasis>

The composition of lipids from the aerial parts of two species of halophytes from the family Chenopodiaceae, Halostachys caspica C. A. Mey. and Halocharis hispida Bge. was determined. Neutral lipids (NL, 62.1 and 54.2%, respectively) dominated the total lipids (TL) of these plants. More than a third of the NL were esters of aliphatic alcohols and phytosterols (FAE). Fatty acids 16:0, 18:1, and 18:2 dominated the acids of FAE; 16:0, 18:1, and 18:3, the phospholipids. The principal fatty acids of glycolipids were unsaturated acids (68.3 and 75.1%) with linolenic acid dominating (44.9 and 43.5%). Presented at the 7th International Symposium on the Chemistry of Natural Compounds, Tashkent, October 16–18, 2007. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 276–278, May–June, 2009.     

Synthesis of 6-methyl-8<Emphasis Type="Italic">H</Emphasis>-dibenzo[<Emphasis Type="Italic">a</Emphasis>,<Emphasis Type="Italic">g</Emphasis>]quinolizin-8-imines <Emphasis Type="Italic">via Reissert</Emphasis> compounds

Alkylation of Reissert compounds derived from 3-methylisoquinolines with several 2-cyanobenzylbromides followed by hydrolytic cleavage provided the corresponding 1-benzyl-3-methylisoquinolines. Treatment of the latter with methylmagnesiumiodide caused cyclization to the title compounds rather than formation of 2-acetylbenzylisoquinolines.     

Purification and Biochemical Characterization of Two Xylanases from <Emphasis Type="Italic">Aspergillus sydowii</Emphasis> SBS 45

Two xylanases were isolated and purified from crude culture filtrate of Aspergillus sydowii SBS 45 after 9 days of growth on wheat bran containing 0.5% (w/v) birch wood xylan as the carbon source under solid-state fermentation. After a three-step purification scheme involving ammonium sulfate precipitation, gel filtration chromatography (Sephadex G-200), and anion exchange chromatography (DEAE-Sephadex A-50), xylanase I was purified 93.41 times, and xylanase II was purified 77.40 times with yields of 4.49 and 10.46, respectively. Molecular weights of xylanase I and II were 20.1 and 43 kDa, respectively, in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Optimum temperature was 50 degrees C, and optimum pH was 10.0 for both xylanase I and II. The Km value of xylanase I for birch wood xylan was 3.18 mg ml(-1) and for oat spelt xylan 6.45 mg ml(-1), while the Km value of xylanase II for birch wood xylan was 6.51 mg ml(-1) and for oat spelt xylan 7.69 mg ml(-1). Metal ions like Al3+, Ba2+, Ca2+, Na+, and Zn2+ enhanced the activity of xylanase I and II at 10 mM concentration. Among the additives, L-tryptophan enhanced the activity of xylanase I and II at 10-, 20-, and 30-mM concentrations. Both xylanases appeared to be glycoproteins.     

Characterization of Surfactin Produced by <Emphasis Type="Italic">Bacillus subtilis</Emphasis> Isolate BS5

Physical and chromatographic characterization of the surfactin biosurfactant produced by Bacillus subtilis isolate BS5 has been conducted to study its potentiality for industrial application. The crude extract of test surfactin appeared as off-white to buff flake-like amorphous residue with bad odor similar to sour pomegranate. Test surfactin showed solubility in aqueous solution at pH>5 with optimum solubility at pH 8-8.5. It was also soluble in organic solvents like ethanol, acetone, methanol, butanol, chloroform, and dichloromethane. Surfactin crystals appeared rectangular with blunt corners and were arranged perpendicular to each other making a plus sign. Extracted surfactin showed high surface activity, as it could lower the surface tension of water from about 70 to 36 mN/m at approximately 15.6 mg/l. Moreover, test surfactin exhibited excellent stabilities at high temperatures (100 degrees C for up to 1 h at and autoclaving at 121 degrees C for 10 min), salinities (up to 6% NaCl), and over a wide range of pH (5-13). Test surfactin in the cell-free supernatant or crude culture broth forms showed high emulsification indices against kerosene (62.5% and 59%, respectively), diesel (62.5% and 66%, respectively), and motor oil (62% and 66%, respectively). These characters can effectively make test surfactin, in its crude forms, a potential candidate for the use in bioremediation of hydrocarbon-contaminated sites or in the petroleum industry. Chromatographic characterization of test surfactin, using high-performance liquid chromatography technique, revealed that the extracted surfactin contained numerous isoforms, of which six were found in the standard surfactin preparation (Fluka). Additional peaks appeared in the test surfactin and not in the standard one. These peaks may correspond to new surfactin isoforms that may be present in the test surfactin produced by B. subtilis isolate BS5.     

Characterization of an Exopolygalacturonase from <Emphasis Type="Italic">Aspergillus niger</Emphasis>

Polygalacturonase (PGI) from Aspergillus niger NRRL3 was purified about 12.0-fold from the cell-free broth using diethylaminoethyl-Sepharose and Sephacryl S-200 columns. The molecular weight of the PGI was 32,000 Da as estimated by gel filtration and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. PGI had an isoelectric point of 7.6 and an optimum pH of 5.0. PGI was active on polygalacturonic acid and esterified pectins, but the activity on pectin decreased with an increase in degree of esterification. PGI had higher affinity (low Km) and turnover number (Vmax/Km and Kcat/Km) toward polygalacturonic acid. PGI was found to have a temperature optimum at 40 degrees C and was approximately stable up to 30 degrees C. All the examined metal cations had partial inhibitory effects on PGI, while Mn+2 at 5 mM caused a complete inhibition for the enzyme. Comparison of viscosity reduction rates with release of reducing sugars indicated that the enzyme from A. niger is exoacting. The storage stability study of PGI showed that the enzyme in powder form retained 56% of its activity after 9 months of storage at 4 degrees C. The above properties of PGI may be suitable for food processing.     

Antioxidant flavonoids from <Emphasis Type="Italic">Tamus communis</Emphasis> ssp. <Emphasis Type="Italic">cretica</Emphasis>

A new flavonoid, kaempferol-3,4′-di-O-α-L-rhamnopyranoside (1), and three known flavonoids (2–4) were isolated from the aerial parts of T. communis L. The structure of the new compound was elucidated on the basis of spectroscopic data. Compounds 1 and 2 showed significant antioxidant activity (IC₅₀ 187.151 ± 0.821 μM, and 92.079±0.513 μM, respectively), whereas compounds 3 and 4 showed moderate activity in DPPH free radical scavenging assays. Published in Khimiya Prirodnykh Soedinenii, No. 3, pp. 295–297, May–June, 2009.     

Rapid molecular typing of <Emphasis Type="Italic">Tuber melanosporum</Emphasis>, <Emphasis Type="Italic">T. brumale</Emphasis> and <Emphasis Type="Italic">T. indicum</Emphasis> from tree seedlings and canned truffles

We have developed new DNA extraction and purification procedures for investigation of mycorrhized seedlings and canned truffles. Use of these procedures on approximately 100 mg initial material enabled good sample representation. For mycorrhized seedlings, Taq polymerase inhibitors were discarded irrespective of tree species. In routine analysis we systematically used consensus primers ITS1/ITS4 to check the absence of Taq polymerase inhibitors and the presence of fungus DNA. Positive response with ITS validates other positive or negative PCR results. Absence of amplification with ITS prevents validation of other results. For canned truffles, DNA harvested from ascocarps sterilized for one and a half hours at 115°C was amplified with specific primers. We have developed consensus primers, named R12/F12, to check for the presence of amplifiable fungus DNA and the absence of Taq polymerase inhibitors. Here also, positive response with consensus R12/F12 validates other positive or negative PCR results. We have developed one primer pair specific for T. brumale and another specific for T. melanosporum. We can then characterize these two taxa, which enables the use of truffle or truffled French designations. We can also characterize T. indicum, the Asiatic black truffle that might fraudulently be sold as T. melanosporum and T. brumale. These three specific primer pairs were used independently of DNA extraction from tree seedlings or canned truffles. Our process is specific, sensitive, convenient, and quick.J.P. Douet and D. Mabru have contributed equally to this work     

Purification and Characterization of Cell Suspensions Peroxidase from Cotton (<Emphasis Type="Italic">Gossypium hirsutum</Emphasis> L.)

Two peroxidases, cPOD-I and rPOD-II, have been isolated and purified from cotton cell suspension and their biochemical characteristics studied. rPOD-II from R405-2000, a non-embryogenic cultivar, has higher activity than cPOD-I derived from Coker 312, which developed an embryogenic structure. The cPOD-I and rPOD-II had molecular mass of 39.1 and 64 kDa respectively, as determined by SDS-PAGE. Both enzymes showed high efficiency of interaction with the guaiacol at 25 mM. The optimal pH for cPOD-I and rPOD-II activity was 5.0 and 6.0, respectively. The enzyme had an optimum temperature of 25 °C and was relatively stable at 20–30 °C. The isoenzymes were highly inhibited by ascorbic acid, dithiothreitol, sodium metabisulfite, and β-mercaptoethanol. Their activities were highly enhanced by Al³⁺, Fe³⁺, Ca²⁺, and Ni²⁺, but they were moderately inhibited by Mn²⁺ and K⁺. The enzyme lost 50% to 62% of its activity in the presence of Zn²⁺ and Hg²⁺.     

Effects of Carbon and Nitrogen Sources and Oxygenation on the Production of Inulinase by <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis>

Cultivations of Kluyveromyces marxianus var. bulgaricus ATCC 16045 were performed on both minimal and complex media using different carbon and nitrogen sources either in the presence or absence of aeration. The results collected were worked out and compared so as to provide a useful contribution to the optimization of inulinase production. Kinetics of extracellular inulinase release were similar on glucose, fructose, and sucrose. Inulinase was detected at basal level since the beginning of batch runs on these three carbon sources and overproduced after their depletion. The highest inulinase activity in minimal medium containing 10 g/l sucrose (6.4 IU/ml) was obtained at an initial (NH₄)₂SO₄ concentration of 5 g/l, whereas it was reduced to about one fourth of this value and detected only at the beginning under nitrogen-limited conditions. The best sucrose concentrations for the enzyme production were 30 and 20 g/l in minimal and complex media, yielding 15.4 and 208 IU/ml, respectively. In general, the enzyme activity was much higher in complex than in minimal medium under all conditions. O₂-enriched air neither improved inulinase production nor prevented ethanol formation.     

Expression,Purification, and Characterization of Hepatitis B Virus Surface Antigens (HBsAg) in Yeast <Emphasis Type="Italic">Pichia Pastoris</Emphasis>

Prevention of the prevalence of HB depends upon the development of efficient diagnostic reagent and preventive vaccine. Pichia pastoris offers many advantages over the other expression systems in the production of recombinant HBsAg. In this study, we reported that the recombinant P. pastoris strains were cultured in shake flasks and then scaled up in a 5.0-l bioreactor: approximately 27 mg/l of the protein and the maximal cell OD at 600 nm of 310 were achieved in the bioreactor. The recombinant HBsAg was purified by three steps of purification procedures. SDS-PAGE showed that the purified recombinant HBsAg constituted only one homogeneous band of ~24 kDa. CsCl density gradient ultracentrifugation assay indicated that the density of the HBsAg was 1.2 mg/ml, which was in agreement with the natural HBsAg, the HBsAg expressed in Saccharomyces cerevisiae and in mammalian cells. Electron microscope observation revealed that the purified recombinant HBsAg was homogeneous 22-nm particles, suggesting the HBsAg expressed in P. pastoris was self-assembled to virus-like structures. Competitive ELISA indicated that P. pastoris-derived HBsAg possessed the excellent immunoreaction with anti-HBsAg. Animal immunization showed that the immunogenicity of P. pastoris-derived HBsAg was superior to that of S. cerevisiae-derived HBsAg. Together, our results demonstrated that the recombinant HBsAg expressed in P. pastoris could provide promising, inexpensive, and large-scale materials for the diagnostic reagent and vaccine to prevent HBV infection. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. Rushi Liu and Qinlu Lin contributed equally to this work.     

An efficient <Emphasis Type="Italic">Mannich</Emphasis>-type synthesis of <Emphasis Type="Italic">bis</Emphasis>(pyrido[2,1-<Emphasis Type="Italic">b</Emphasis>][1,3,5]thiadiazin-7-yl)-methanes

Morpholinium 3-cyano-4-methyl-6-oxo-1,6-dihydropyridine-2-thiolate upon treatment with primary amines and a formaldehyde excess under mild conditions produces bis(pyrido[2,1-b][1,3,5]thiadiazin-7-yl)methane derivatives in good yields (67–87%). Correspondence: Victor V. Dotsenko, State Enterprise “Luganskstandartmetrology”, 91021 Lugansk, Ukraine.     

Bioactive Benzopyrone Derivatives from New Recombinant Fusant of Marine <Emphasis Type="Italic">Streptomyces</Emphasis>

In our searching program for bioactive secondary metabolites from marine Streptomycetes, three microbial benzopyrone derivatives (1-3), 7-methylcoumarin (1) and two flavonoides, rhamnazin (2) and cirsimaritin (3), were obtained during the working up of the ethyl acetate fraction of a marine Streptomyces fusant obtained from protoplast fusion between Streptomyces strains Merv 1996 and Merv 7409. The structures of the three compounds (1-3) were established by nuclear magnetic resonance, mass, UV spectra, and by comparison with literature data. Marine Streptomyces strains were identified based on their phenotypic and chemotypic characteristics as two different bioactive strains of the genus Streptomyces. We described here the fermentation, isolation, as well as the biological activity of these bioactive compounds. The isolated compounds (1-3) are reported here as microbial products for the first time.     

Splitting of the <Emphasis Type="Italic">d</Emphasis><Superscript><Emphasis Type="Italic">N</Emphasis></Superscript> atomic states in icosahedral 3<Emphasis Type="Italic">d</Emphasis> metal endofullerenes M@C<Subscript>60</Subscript>

Group-theoretical and quantum-chemical investigations of the spectrum of low-lying excited states have been performed by the ROHF and FCI-RAS (Full CI in Restricted Active Space) methods for 3d metal endofullerenes (MEFs) M@C₆₀ (M =Mn, Cr, and Fe) in different charged states. The major purpose of this study is quantum-chemical verification of the anomalous (“non-Bethe’s”) character of splitting of the d ^N atomic states in an electrostatic field with icosahedral symmetry, predicted previously within the theory of integral invariants theory. The interrelation between the integral invariants theory and the quantumchemical methods applied in this work is considered in detail. Our calculations suggest that the d ^N atomic states in the icosahedral field generated by fullerene C60 (I _h ) on a metal atom (ion) remain non-split for different charged states of the metal and C₆₀. Reasons for this phenomenon and other possible approaches to verification of the prediction are discussed. It is demonstrated that the d ^N states of the encapsulated metal are split in icosahedral 3d MEFs only under very strong compression of these structures.     

Screening and Immobilization <Emphasis Type="Italic">Burkholderia</Emphasis> sp. GXU56 Lipase for Enantioselective Resolution of (<Emphasis Type="Italic">R</Emphasis>,<Emphasis Type="Italic">S</Emphasis>)-Methyl Mandelate

Microorganisms producing lipase were isolated from soil and sewage samples and screened for enantioselective resolution of (R,S)-methyl mandelate to (R)-mandelic acid. A strain designated as GXU56 was obtained and identified as Burkholderia sp. Preparing immobilized GXU56 lipase by simple adsorption on octyl sepharose CL-4B, the optimum temperature was shifted from 40 °C (free lipase) to 50 °C (immobilized lipase), and the optimum pH was shifted from 8.0 (free lipase) to 7.2 (immobilized lipase). The immobilized enzyme displayed excellent stability in the pH range of 5.0–8.0, at the temperatures below 50 °C and in organic solvents compared with free enzyme. Enantioselectivity ratio for (R)-mandelic acid (E) was dramatically improved from 29.2 to more than 300 by applying immobilized lipase in the resolution of (R,S)-methyl mandelate. After five cycles of use of immobilized lipase, conversion and enantiomeric excess of (R)-mandelic acid were 34.5% and 98.5%, respectively, with enantioselectivity ratio for (R)-mandelic acid (E) of 230. Thus, octyl-sepharose-immobilized GXU56 lipase can be used as a bio-resolution reagent for producing (R)-mandelic acid.     

Crystal and molecular structure of <Emphasis Type="Italic">tris</Emphasis>(<Emphasis Type="Italic">m</Emphasis>-chlorophenyl)phosphine selenide

The crystal and molecular structure of tris(m-chlorophenyl)phosphine selenide, C₁₈H₁₂Cl₃PSe (I), was investigated by X-ray diffraction (XRD) analysis. The trigonal rhombohedral structure of I (space group \(R\overline 3 c\), a = 14.110(2) Å, c = 32.360(4) Å, Z = 12) was solved by direct methods and refined by least squares in an anisotropic approximation (R = 0.029) for 1319 averaged measured reflections (CAD-4 automatic diffractometer, λCuK_α).