A large deformation analysis for nonlinear elastic problems by hypoelastic theory

In this paper, large deformation problems for nonlinear elasticity are studied on the basis of hypoelastic theory. The expression of Cauchy elasticity is derived in the form of hypoclasticity. This makes it possible to solve large deformation for nonlinear elastic problems by the hypoelastic method. The variational principle of hypoclasticity and the Ritz method are used to obtain the numerical solution of a rectangular rubber membrane under uniaxial stretch.     

A rate type method for large deformation problems of nonlinear elasticity

ＡＲＡＴＥＴＹＰＥＭＥＴＨＯＤＦＯＲＬＡＲＧＥＤＥＦＯＲＭＡＴＩＯＮＰＲＯＢＬＥＭＳＯＦＮＯＮＬＩＮＥＡＲＥＬＡＳＴＩＣＩＴＹＬｉａｎｇＦｅｉ（梁非）,ＺｈａｎｇＳｈａｎ－ｙｕａｎ（张善元）（ＴａｉｙｕａｎＵｎｉｖｅｒｓｉｔｙｏｆＴｅｃｈｎｏｌｏｇｙ...     

Thermal post-buckling analysis of imperfect laminated plates using a higher-order shear deformation theory

Thermal post-buckling analysis is presented for a simply supported, composite laminated plate subjected to uniform or non-uniform tent-like temperature loading. The initial geometrical imperfection of the plate is taken into account. The formulations are based on the Reddy's higher-order shear deformation plate theory, and include thermal effects. The analysis uses a mixed Galerkin-perturbation technique to determine thermal buckling loads and post-buckling equilibrium paths. Numerical examples cover the performances of perfect and imperfect, antisymmetrically angle-ply and symmetrically cross-ply laminated plates. The effects played by transverse shear deformation, thermal load ratio, plate aspect ratio, total number of plies, fiber orientation and initial geometrical imperfections are studied. Typical results are presented in dimensionless graphical form.     

大变形问题分析的局部Petrov-Galerkin法

在微机电系统(MEMS)的建模和模拟研究中,大变形或大移动要充分予以考虑.用有限元法分析这类问题,由于难以避免的网格畸变,使模拟效率精度降低甚至失效,无网格方法(Meshless Method)则能在分析这类问题时显示出明显的优势,无网格局部Petrov-Galerkin(MLPG)法被誉为是一种有发展前景的真正无网格法.本文进一步发展了MLPG法,通过对任意的离散分布节点采用局部径向基函数构造插值形函数和Heaviside权函数,分析方程采用局部加权弱形式离散,建立了变量仅依赖于初始构型的完全Lagrange分析格式,最后用Newton-Raphson法迭代求解.文中分析了悬臂梁典型算例和微机电开关非线性大变形问题,通过与有限元结果的比较,表明本文提出的大变形问题无网格局部Petrov-Galerkin法具有稳定性好及收敛性快等优点.     

Iterative method for large deflection nonlinear problem of laminated composite shallow shells and plates

ＩｎｔｒｏｄｕｃｔｉｏｎＡｓｃｏｍｐｏｓｉｔｅｓａｒｅｅｘｔｅｎｓｉｖｅｌｙａｐｐｌｉｅｄｉｎｍｏｄｅｒｎｅｎｇｉｎｅｒｉｎｇｓｔｒｕｃｔｕｒｅｓａｎｄｍｅｃｈａｎｉｃｓｏｆｃｏｍｐｌｅｘｍａｔｅｒｉａｌｓｈａｓｂｅｎｈｉｇｈｌｙａｄｖａｎｃｅｄ,ｉ...     

非线性弹性大变形材料梁的抗爆特性

从理论上探讨了非线性弹性大变形材料应用于抗爆结构的可行性,为此,基于等效结构体系的分析原理,将两端固定铰支梁的横向和纵向位移表示为三角级数形式,应用第二类Lagrange方程建立了非线性大变形材料梁的非线性分析方法,并且用ABAQUS有限元软件中的超弹性材料模型验证了所提出的方法的有效性。对典型的爆炸荷载作用下非线性弹性大变形材料梁的抗爆特性进行了分析,讨论了动力放大系数和材料性质及动荷载之间的关系。结果表明:与线弹性小变形材料相比,非线性弹性大变形材料具有优良的抗爆特性,结构的抗爆能力随结构变形的增大而显著提高。     

Nonlinear deformation theory of thin shell

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｎｏｎｌｉｎｅａｒｄｅｆｏｒｍａｔｉｏｎｐｒｏｂｌｅｍｏｆｔｈｉｎｓｈｅｌｌｉｓａｖｅｒｙｃｏｍｐｌｅｘａｎｄｄｉｆｆｉｃｕｌｔｐｒｏｂｌｅｍ.Ｉｔｍｕｓｔｂｅｓｉｍｐｌｉｆｉｅｄ.Ｉｎｒｅｆｅｒｅｎｃｅｂｏｏｋ,ｆｏｒｅｘａｍｐｌｅ,ｔｏｓｉｍｐｌｉｆｙχ=α233α231 α232 α233-1,ｕｓｕａｌｌｙｐｕｔｔｉｎｇα231 α232 α233=1[1],ｗｅｇｅｔχ=α233-1.Ｗｈｅｎα33>1,ｗｅｇｅｔχ>0.Ｍｏｒｅｏｖｅｒｔｏｓｉｍｐｌｉｆｙε11=(1 ｅ11)2 ｅ212 ｅ213-1,ｗｈｅｎｅ11,ｅ212,ｅ21…     

Geometrically nonlinear isogeometric analysis of laminated composite plates based on higher-order shear deformation theory

In this paper, we present an effectively numerical approach based on isogeometric analysis (IGA) and higher-order shear deformation theory (HSDT) for geometrically nonlinear analysis of laminated composite plates. The HSDT allows us to approximate displacement field that ensures by itself the realistic shear strain energy part without shear correction factors (SCFs). IGA utilizing basis functions namely B-splines or non-uniform rational B-splines (NURBS) enables to satisfy easily the stringent continuity requirement of the HSDT model without any additional variables. The nonlinearity of the plates is formed in the total Lagrange approach based on the small strain assumptions. Numerous numerical validations for the isotropic, orthotropic, cross-ply and angle-ply laminated plates are provided to demonstrate the effectiveness of the proposed method.     

层合板六参量几何非线性高阶剪切理论

提出了层合板六参量的高阶剪切变形理论的位移场假定,以考虑在大变形条件下层合板法向变形和厚度的变化.同时对von Karman应变位移简化假设进行了补充修改,考虑某些有限变形条件下被忽略小量的影响,建立了对应于该文六参量模型和更加适合大变形分析的层合板几何非线性关系,平衡方程和边界条件.利用该文模型分析了橡胶复合材料简支板的大变形弯曲行为,并对比Reddy五参量几何非线性简单高阶剪切变形层合理论解和弹性解析解,证明该文模型更适合大变形和层合厚板分析.     

Short-term microdamage of laminated material with nonlinear matrix and microdamaged reinforcement

A structural theory of short-term microdamage is proposed for a two-component laminated composite with microdamageable reinforcement and physically nonlinear matrix. The basis of the theory is the stochastic elasticity equations of a laminated composite with a porous reinforcement. Microvolumes in the reinforcement material meet the Huber-Mises failure criterion. The damaged-microvolume balance equation for the reinforcement is derived. This equation and the equations relating macrostresses and macrostrains of a laminated composite with porous reinforcement and physically nonlinear matrix constitute a closed-form system of equations. This system describes the coupled processes of physically nonlinear deformation and microdamage occurring in different composite components. Algorithms for computing the microdamage-macrostrain relationships and deformation diagrams are developed. Uniaxial tension curves are plotted for a laminated composite with linearly hardening matrix __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 12, pp. 3–12, December 2005.     

Deformation of a laminated composite with a physically nonlinear reinforcement and microdamageable matrix

The structural theory of short-term microdamage is generalized to a laminated composite with a microdamageable matrix and physically nonlinear reinforcement. The basis for the generalization is the stochastic elasticity equations of a laminated composite with a porous matrix. Microvolumes in the matrix material meet the Huber-Mises failure criterion. The damaged-microvolume balance equation for the matrix is derived. This equation and the equations relating macrostresses and macrostrains of a laminated composite with porous matrix and physically nonlinear reinforcement constitute a closed-form system of equations. This system describes the coupled processes of physically nonlinear deformation and microdamage occurring in different composite components. Algorithms for computing the microdamage-macrostrain relationships and deformation diagrams are developed. Uniaxial tension curves are plotted for a laminated composite with linearly hardening reinforcement __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 11, pp. 47–56, November 2005.     

柔性梁大变形计算的一种新方法

研究了柔性梁大变形问题。常规Lagrangian有限元格式在处理大变形问题时,由于其单元插值函数不满足位移场的协调性要求,从而需要划分较多的单元,才能得到较好的结果。本文首先推导了Lagrangian坐标描述下的位移场变量满足的协调关系式,利用此关系式给出了位移场协调的非线性单元插值函数。基于虚功原理导出了梁大变形问题的非线性控制方程,数值计算结果证明了本文方法的正确性和有效性。     

THIRD ORDER SHEAR DEFORMATION MODEL FOR LAMINATED SHELLS WITH FINITE ROTATIONS： FORMULATION AND CONSISTENT LINEARIZATION

The paper presents an approach for the formulation of general laminated shells based on a third order shear deformation theory. These shells undergo finite (unlimited in size) rotations and large overall motions but with small strains. A singularity-free parametrization of the rotation field is adopted. The constitutive equations, derived with respect to laminate curvilinear coordinates, are applicable to shell elements with an arbitrary number of orthotropic layers and where the material principal axes can vary from layer to layer. A careful consideration of the consistent linearization procedure pertinent to the proposed parametrization of finite rotations leads to symmetric tangent stiffness matrices. The matrix formulation adopted here makes it possible to implement the present formulation within the framework of the finite element method as a straightforward task.     

几何非线性分析的无网格伽辽金算法

利用几何非线性的应变-位移关系,在小应变假设的条件下,推导出二维几何非线性问题中的无网格伽辽金法的计算格式。由于无网格方法中的形函数不具备Kronecker delta性质,文中采用罚方法来实现本质边界条件。数值实例表明,无网格伽辽金法在处理几何非线性问题时,具有较高的计算精度,是一种有效的数值计算方法。     

A nonlinear composite plate theory

A general nonlinear theory for the dynamics of elastic anisotropic plates undergoing moderate-rotation vibrations is presented. The theory fully accounts for geometric nonlinearities (moderate rotations and displacements) by using local stress and strain measures and an exact coordinate transformation, which result in nonlinear curvatures and strain-displacement expressions that contain the von Karman strains as a special case. The theory accounts for transverse shear deformations by using a third-order theory and for extensionality and changes in the configuration due to in-plane and transverse deformations. Five third-order nonlinear partial-differential equations of motion describing the extension-extension-bending-shear-shear vibrations of plates are obtained by an asymptotic analysis, which reveals that laminated plates display linear elastic and nonlinear geometric couplings among all motions.     

A new non-linear higher-order shear deformation theory for large-amplitude vibrations of laminated doubly curved shells

A consistent higher-order shear deformation non-linear theory is developed for shells of generic shape, taking geometric imperfections into account. The geometrically non-linear strain-displacement relationships are derived retaining full non-linear terms in the in-plane displacements; they are presented in curvilinear coordinates in a formulation ready to be implemented. Then, large-amplitude forced vibrations of a simply supported, laminated circular cylindrical shell are studied (i) by using the developed theory, and (ii) keeping only non-linear terms of the von Kármán type. Results show that inaccurate results are obtained by keeping only non-linear terms of the von Kármán type for vibration amplitudes of about two times the shell thickness for the studied case.     

An analytical solution of rectangular laminated plates by higher-order theory

I.IntroductionSincecompositematerialshavesuperiormechanicalproperties,theyarewidelyconcernedbytechnicians.Fromtheclassicallaminatetheorytothefirst-ordersheardeformationtheoryandfromthehigher-ordertheorytotheelasticitytheory,thetheoriesoflaminatedplatesofcompositemeterialsgetfastdevelopment.TheNaviersolutionofsimplysupportedrectangularplateswasdevelopedbyWhitneyandLeissalllforclassicallaminatetheory.TheNaviersolutionwasdevelopedbyWhitneyandPaganol'1forthefirst-ordersheardeformationtheory.Th…     

On the nonlinear stability of symmetrically laminated cylindrically orthotropic shallow spherical shells

In this paper,the large deflection theory of symmetrically laminated cylindricallyorthotropic shallow spherical shells is established.Based on this theory,applying themodified iteration method,the analytic solution for critical buckling loads of the shells withrigidly clamped edges under actions of uniform pressure has been obtained.     

压电层合梁静动力学分析的高精度梁单元

给出了一个对复合材料压电层合梁进行数值分析的高精度压电层合梁单元。基于Shi三阶剪切变形板理论的位移场和Layer-wise理论的电势场,用力-电耦合的变分原理及Hamilton原理推导了压电层合梁单元列式。采用拟协调元方法推导了一个可显式给出单元刚度矩阵的两节点压电层合梁单元,并应用于压电层合梁的力-电耦合弯曲和自由振动分析。计算结果表明,该梁单元给出的梁挠度和固有频率与解析解吻合良好,并优于其它梁单元的计算结果,说明了本文所给压电层合梁单元的可靠性和准确性。研究结果可为力-电耦合作用下压电层合梁的力学分析提供一个简单、精确且高效的压电层合梁单元。     

A nonlinear composite shell theory

A general nonlinear theory for the dynamics of elastic anisotropic circular cylindrical shells undergoing small strains and moderate-rotation vibrations is presented. The theory fully accounts for extensionality and geometric nonlinearities by using local stress and strain measures and an exact coordinate transformation, which result in nonlinear curvatures and strain-displacement expressions that contain the von Karman strains as a special case. Moreover, the linear part of the theory contains, as special cases, most of the classical linear theories when appropriate stress resultants and couples are defined. Parabolic distributions of the transverse shear strains are accounted for by using a third-order theory and hence shear correction factors are not required. Five third-order nonlinear partial differential equations describing the extension, bending, and shear vibrations of shells are obtained using the principle of virtual work and an asymptotic analysis. These equations show that laminated shells display linear elastic and nonlinear geometric couplings among all motions.