Synthesis, structure, and reactivity of a pyridine-stabilized germanone

The first isolable pyridine‐stabilized germanone has been prepared and its reactivity toward trimethylaluminum has been investigated. The germanone adduct results from a stepwise conversion that starts from 4‐dimethylaminopyridine (DMAP) and the ylide‐like N‐heterocyclic germylene LGe: (L=CH{(C?CH₂)(CMe)[N(aryl)]₂}, aryl=2,6‐iPr₂C₆H₃) ( 1 ) at room temperature, and gives the corresponding germylene–pyridine adduct L(DMAP)Ge: ( 2 ) in 91 % yield. The latter reacts with N₂O at room temperature to form the desired germanone complex L(DMAP)Ge?O ( 3 ) in 73 % yield. The Ge? O distance of 1.646(2) Å in 3 is the shortest hitherto reported for a Ge?O species. The reaction of 3 with trimethylaluminum leads solely to the addition product LGe(Me)O[Al(DMAP)Me₂] ( 4 ). The latter results from insertion of the Ge?O subunit into an Al? Me bond of AlMe₃ and concomitant migration of the DMAP ligand from germanium to the aluminum atom. Compounds 2 – 4 have been fully characterized by analytical and spectroscopic methods. Their molecular structures have been established by single‐crystal X‐ray crystallographic analysis.     

Syntheses and crystal structures of bis(4-dimethylaminopyridine) group 12 trifluoroacetates — M(OCOCF3)2·2DMAP (M=Zn, Cd, Hg)

Bis(4-dimethylaminopyridine) group 12 trifluoroacetates—M(OCOCF₃)₂·2DMAP (M=Zn, Cd, Hg) were prepared in quantitative yields from the anhydrous metal trifluoroacetates and DMAP. All compounds crystallize in the triclinic space group (no. 2) with two molecules per unit cell. While Zn(OCOCF₃)₂·2DMAP is built up by well-separated tetrahedral units exhibiting strongly covalent ZnO bonds to monodentate trifluoroactate groups, Cd(OCOCF₃)₂·2DMAP and Hg(OCOCF₃)₂·2DMAP form dimeric units. The metal centers are distorted octahedrally surrounded by two axial DMAP ligands, two ionic bridging and one chelating trifluoroacetate group.     

Synthesis,Characterization, and Reactivity of a Uranium(VI) Carbene Imido Oxo Complex

We report the uranium(VI) carbene imido oxo complex [U(BIPM^TMS)(NMes)(O)(DMAP)₂] ( 5 , BIPM^TMS=C(PPh₂NSiMe₃)₂; Mes=2,4,6‐Me₃C₆H₂; DMAP=4‐(dimethylamino)pyridine) which exhibits the unprecedented arrangement of three formal multiply bonded ligands to one metal center where the coordinated heteroatoms derive from different element groups. This complex was prepared by incorporation of carbene, imido, and then oxo groups at the uranium center by salt elimination, protonolysis, and two‐electron oxidation, respectively. The oxo and imido groups adopt axial positions in a T‐shaped motif with respect to the carbene, which is consistent with an inverse trans‐influence. Complex 5 reacts with tert‐butylisocyanate at the imido rather than carbene group to afford the uranyl(VI) carbene complex [U(BIPM^TMS)(O)₂(DMAP)₂] ( 6 ).     

Synthesis,Characterization, and Reactivity of a Uranium(VI) Carbene Imido Oxo Complex

We report the uranium(VI) carbene imido oxo complex [U(BIPM^TMS)(NMes)(O)(DMAP)₂] ( 5 , BIPM^TMS=C(PPh₂NSiMe₃)₂; Mes=2,4,6‐Me₃C₆H₂; DMAP=4‐(dimethylamino)pyridine) which exhibits the unprecedented arrangement of three formal multiply bonded ligands to one metal center where the coordinated heteroatoms derive from different element groups. This complex was prepared by incorporation of carbene, imido, and then oxo groups at the uranium center by salt elimination, protonolysis, and two‐electron oxidation, respectively. The oxo and imido groups adopt axial positions in a T‐shaped motif with respect to the carbene, which is consistent with an inverse trans‐influence. Complex 5 reacts with tert‐butylisocyanate at the imido rather than carbene group to afford the uranyl(VI) carbene complex [U(BIPM^TMS)(O)₂(DMAP)₂] ( 6 ).     

Encapsulation of Chloride-water cluster anion [Cl6(H2O)8]6- in a cage structure based [Cu(DMAP)4]2+ aggregation

A well chloride?water cluster [Cl₆(H₂O)₈]^6? in the complex [Cu₃(DMAP)₁₂Cl₆?8H₂O] (DMAP = N,N’-dimethyl p-aminopyridine) has been investigated structurally in the solid state. The chloride-water cluster [Cl₆(H₂O)₈]^6? is stabilized and orderly arranged by hydrogen bonds which display high symmetry. Six hosts [Cu(DMAP)₄]²⁺ cationic form a cage-like aggregation, and chloride-water [Cl₆(H₂O)₈]^6? cluster located in the cage. Cl^? anion play an important role to connect cubane-like (H₂O)₈ water cluster forming [Cl₆(H₂O)₈]^6? cluster, and on the other hand, to connect cage-like [Cu(DMAP)₄]²⁺ cationic aggregation by means of ionic electrostatic interaction and long-range coordinate bond interaction. The formation of such a cluster anion may be available for insight into the nature of hydration of chloride in H₂O.     

A facile method for the preparation of carbodiimides from thioureas and (Boc)2O

A concise method for the preparation of carbodiimides from thioureas using di-tert-butyl dicarbonate [(Boc)₂O] as the dehydrosulfurizative reagent has been developed. Using DMAP as the catalyst, a variety of symmetric and asymmetric 1,3-diaryl thioureas were converted into the corresponding carbodiimides efficiently in a short time.     

Synthesis of a Hexameric Magnesium 4-pyridyl Complex with Cyclohexane-like Ring Structure via Reductive C-N Activation

The reaction of [{(^Arnacnac)Mg}₂] (^Arnacnac = HC{MeC(NAr)}₂, Ar = 2,6-diisopropylphenyl, Dip, or 2,6-diethylphenyl, Dep) with 4-dimethylaminopyridine (DMAP) at elevated temperatures afforded the hexameric magnesium 4-pyridyl complex [{(^Arnacnac)Mg(4-C₅H₄N)}₆] via reductive cleavage of the DMAP C-N bond. The title compound contains a large s-block organometallic cyclohexane-like ring structure comprising tetrahedral (^Arnacnac)Mg nodes and linked by linear 4-pyridyl bridging ligands, and the structure is compared with other ring systems. [(^Dipnacnac)Mg(DMAP)(NMe₂)] was structurally characterised as a by-product.     

A new efficient synthesis of isothiocyanates from amines using di-tert-butyl dicarbonate

Alkyl and aryl amines are converted smoothly to the corresponding isothiocyanates via the dithiocarbamates in good to excellent yields using di-tert-butyl dicarbonate (Boc₂O) and 1-3 mol % of DMAP or DABCO as catalyst. As most of the byproducts are volatile, the work-up involves simple evaporation of the reaction mixture.     

Boomerang‐Type Substitution Reaction: Reactivity of Fullerene Epoxides and a Halofullerenol

The C_s‐symmetric fullerene chlorohydrin C₆₀(Cl)(OH)(OOtBu)₄ reacts with 4‐dimethylaminopyridine (DMAP) and 1,4‐diazabicyclo[2.2.2]octane (DABCO) to yield two isomers with the formula C₆₀(O)(OOtBu)₄ in good yields. These isomers differ with respect to the location of the epoxy functionality. The one from DMAP is C_s symmetric, whereas that from DABCO is C₁ symmetric with the epoxy group on the central pentagon. Two different mechanisms are proposed to explain the chemoselectivity of these reactions. The reaction with DMAP involves single‐electron transfer as the key step; DMAP acts as the electron donor. A combination of an oxygen‐atom shift and S_N2′′ processes (boomerang substitution) are responsible for the formation of isomer with DACBO. Various related reactions support the proposed mechanisms. The structures of new fullerene derivatives were determined by spectroscopy, single‐crystal X‐ray analysis, and chemical correlation experiments.     

Microwave-assisted rapid and efficient synthesis of C-alkyl imidazoisoquinolinone derivatives

The synthesis of a set of 10-benzyl-2,3-dihydroimidazo[1,2-b]isoquinolin-5(1H)-one and 5-oxo-imidazo[1,2-b]isoquinolin-10-yl)-N-phenylacetamide derivatives was achieved by exposing the corresponding alkylating agent and imidazoisoquinolinone to microwave irradiation and traditional oil bath heating in the presence of K₂CO₃ and DMAP. The microwave technique as well as DMAP as base accelerated the alkylation reaction for 2-6 min giving 79-88% yields.     

Visible Light-Gated Organocatalysis Using a RuII-Photocage

The light-gated organocatalysis via the release of 4-N,N-dimethylaminopyridine (DMAP) by irradiation of the [Ru(bpy)₂(DMAP)₂]²⁺ complex with visible light was investigated. As model reaction the acetylation of benzyl alcohols with acetic anhydride was chosen. The pre-catalyst releases one DMAP molecule on irradiation at wavelengths longer than 455 nm. The photochemical process was characterized by steady-state irradiation and ultrafast transient absorption spectroscopy. The latter enabled the observation of the ³MLCT state and the spectral features of the penta-coordinated intermediate [Ru(bpy)₂(DMAP)]²⁺. The released DMAP catalyzes the acetylation of a wide range of benzyl alcohols with chemical yields of up to 99 %. Control experiments revealed unequivocally that it is the released DMAP which takes the role of the catalyst.     

A Terphenyl Supported Dioxophosphorane Dimer: the Light Congener of Lawesson's and Woollins’ Reagents

Thermolysis of a 1,3-dioxa-2-phospholane supported by the terphenyl ligand Ar^iPr4 (Ar^iPr4=[C₆H₃-2,6-(C₆H₃-2,6-iPr₂)]) at 150 °C gives [Ar^iPr4PO₂]₂ via loss of ethene. [Ar^iPr4PO₂]₂ was characterised by X-ray crystallography and NMR spectroscopy; it contains a 4-membered P−O−P−O ring and is the isostructural oxygen analogue of Lawesson's and Woollins’ reagents. The dimeric structure of [Ar^iPr4PO₂]₂ was found to persist in solution through VT NMR spectroscopy and DOSY, supported by DFT calculations. The addition of DMAP to the 1,3-dioxa-2-phospholane facilitates the loss of ethene to give Ar^iPr4(DMAP)PO₂ after days at room temperature, with this product also characterised by X-ray crystallography and NMR spectroscopy. Replacement of the DMAP with pyridine induces ethene loss from the 1,3-dioxa-2-phospholane to provide gram-scale samples of [Ar^iPr4PO₂]₂ in 75 % yield in 2 days at only 100 °C.     

Rapid access to homoallylic alcohols via Pd(OAc)2 catalyzed Barbier type allylation in presence of DMAP

DMAP was found to accelerate significantly the rate of Pd(OAc)₂ catalyzed Barbier type allylation of carbonyl compounds by allylbromide using SnCl₂·2H₂O as reducing agent. Both aldehyde as well as ketones produced excellent yields within a short reaction time in the presence of 3 mol % of Pd(OAc)₂ and 12 mol % of DMAP at room temperature. Aldehydes could be allylated within 5–10 min whereas, in case of ketones, the reaction completes in 45–120 min.     

Synthesis,characterization, and structures of arylaluminum reagents and asymmetric arylation of aldehydes catalyzed by a titanium complex of an N-sulfonylated amino alcohol

A series of phenylaluminum reagents AlPh_xEt_3?x(L) (x = 1–3) containing adduct ligand L [Et₂O, THF, OPPh₃, or 4-dimethylaminopyridine (DMAP)] were synthesized and characterized. NMR studies showed that AlPh_xEt_3?x(L) (x = 1 or 2) exists as an equilibrium mixture of 3–4 species in solution. Solid-state structures of the phenylaluminum reagents reveal a distorted tetrahedral geometry. Asymmetric additions of phenylaluminum to 2-chlorobenzaldehyde were examined employing a titanium(IV) complex [TiL¹(OPrⁱ)₂]₂ 10 (H₂L¹ = (1R,2S)-2-(p-tolylsulfonylamino)-1,3-diphenyl-1-propanol) as a catalyst precursor. It was found that the adduct ligand L had a strong influence on the reactivity and the enantioselectivity in asymmetric phenyl additions to aldehydes. The phenylaluminum reagents with OPPh₃ or DMAP were unreactive toward aldehydes, and AlPh₃(THF) was found to be superior to AlPh₃(OEt₂) or AlPhEt₂(THF). Asymmetric aryl additions of AlAr₃(THF) to aldehydes employing a loading of 5 mol % titanium(IV) complex 10 with a strategy of a slow addition of the aldehydes over 20 min were conducted, and the reactions produced optically active secondary alcohols in high yields with excellent enantioselectivities of up to 94% ee.     

A Silyliumylidene Cation Stabilized by an Amidinate Ligand and 4‐Dimethylaminopyridine

The synthesis and reactivity of a silyliumylidene cation stabilized by an amidinate ligand and 4‐dimethylaminopyridine (DMAP) are described. The reaction of the amidinate silicon(I) dimer [ L Si:]₂ ( 1 ; L =PhC(NtBu)₂) with one equivalent of N‐trimethylsilyl‐4‐dimethylaminopyridinium triflate [4‐NMe₂C₅H₄NSiMe₃]OTf and two equivalents of DMAP in THF afforded [ L Si(DMAP)]OTf ( 2 ). The ambiphilic character of 2 is demonstrated from its reactivity. Treatment of 2 with 1 in THF afforded the disilylenylsilylium triflate [ L′ ₂( L )Si]OTf ( 3 ; L′ = L Si:) with the displacement of DMAP. The reaction of 2 with [K{HB(iBu)₃}] and elemental sulfur in THF afforded the silylsilylene [ L SiSi(H){(NtBu)₂C(H)Ph}] ( 4 ) and the base‐stabilized silanethionium triflate [ L Si(S)DMAP]OTf ( 5 ), respectively. Compounds 2 , 3 , and 5 have been characterized by X‐ray crystallography.     

Dmap-Catalyzed Synthesis of Novel Pyrrolo[2,3-D]Pyrimidine Derivatives Bearing an Aromatic Sulfonamide Moiety

4-(N,N-Dimethylamino)pyridine (DMAP), with a dual role as a basic nucleophilic catalyst, was shown to be a highly efficient catalyst for the synthesis of some new N-(2-aryl-7-benzyl-5,6-diphenyl-7H-pyrrolo[2,3-d]pyrimidin-4-yl)benzenesulfonamides through the reaction of 2-aryl-7-benzyl-5,6-diphenyl-7H-pyrrolo[2,3-d]pyrimidin-4-amines (7-deazaadenines) with benzenesulfonyl chlorides. It was also found that the use of DMAP under solvent-free conditions is much more effective than other catalytic systems such as pyridine as both the catalyst and solvent, t-BuOK in t-BuOH, Et₃N in ethanol (EtOH), and even DMAP in dimethylformamide (DMF). The influences of the reaction parameters, temperature, and the catalyst amount, on the catalytic performance have been studied. All synthetic compounds were characterized on the basis of their full spectral data.     

On the construction of 2-substituted 1,4-diacetoxybutadiene moiety: application to the synthesis of (±)-caulerpenyne

The synthesis of 2-substituted 1,4-diacetoxybutadiene derivatives with a partial control of stereochemistry is described from two potentially precursor enals by a judicious choice of experimental conditions (Ac₂O/DMAP in Et₃N). These conditions have been successfully applied in the first total synthesis of caulerpenyne.     

Two New Iron Coordination Polymers Based on Fe-pyta ChainsIncorporating Pyridine-2,4,6-tricarboxylate

Reaction of FeCIz＇6H20, pyridine-2,4,6-tricarboxylic acid（H3pyta） and NaOH in the hydrothermal system at 185 ℃ resulted in the formation of 1D coordination polymer[Fe（Hpyta）（H2O）2]（1） based on Fe-Hpyta chains. When the abpt[abpt=-4-amino-3,5-bis（4-pyridyl）-l,2,4-triazole] ligand was employed in the reaction system, a 3D supramolecular porous network （H2bpt）[Fe（pyta）（H2O）2]·4H2O（2） was obtained. The framework was constructed with negative （Fe-pyta） chains and the positive H3bpt^＋ in situ, formed from the abpt reagent, to form 1D channels filled with guest water molecules via hydrogen-bonds. X-Ray diffraction crystal structure analysis shows that complex 1 crystallized in the monoclinic system, space group C2/c, a=1.1490（5） nm, b=0.9008（4） nm, c=1.0058（5） nm, B=107.254（9）°, V=0.9942（8） nm3, Z=4; and complex 2 crystallizes in the triclinic system, space group P1 with a=0.90392（11） nm, b=0.96027（11 ） nm, c=1.55540（18） nm, a=73.558（2）°,B= 86.126（2）°,r= 68.745（2）°, V=1.2059（2） nm^3 and Z=2.     

Three Distinct Silver(I) Coordination Polymers: Bridging‐­Ligand Directed Syntheses,Crystal Structures,Luminescence, and Nitrobenzene Sensing Properties

Three distinct Ag^I‐DMAP [DMAP = 4‐(dimethylamino)pyridine] coordination polymers [Ag₂I₂(DMAP)₂]_n ( 1 ), [Ag₂(CN)₂(DMAP)_2.5 · DMAP]_n ( 2 ), and [Ag(SCN)(DMAP)]_n ( 3 ) were constructed by monatomic I^–, diatomic CN^–, and triatomic SCN^– bridges, respectively. 1 – 3 were determined by FT‐IR spectroscopy, elemental analyses, TGA, powder and single‐crystal X‐ray diffraction. 1 exhibits a 1D wavelike chain structure, sustained by 3‐connected I^– bridges, whereas 2 shows a unique 1D single‐ and double‐strand alternating chain, supported by 3‐connected CN^– bridges. Compound 3 has a 2D 3‐connected network architecture, fabricated by 3‐connected SCN^– bridges, and exhibits a (4 · 8²) topology. The luminescence and nitrobenzene sensing properties of 1 – 3 were explored in 2‐propanol suspensions, which revealed that compounds 1 – 3 exhibit DMAP originated luminescence emissions and are highly sensitive for nitrobenzene detection.     

NMR study of water reorientation in molybdic acids: MoO3 · 2H2O and yellow MoO3 · H2O

Proton NMR relaxation times (T₂, T₁, T_1?) are reported for powder samples of MoO₃ · 2H₂O and yellow MoO₃ · H₂O in the temperature range 150–325 K and at 20 and 60 MHz. No translation of hydrogen atoms is detected but the spin-lattice relaxation behavior indicates reorientation of H₂O molecules. The waters coordinated to Mo atoms undergo 180° flips (about their C₂ axes) with similar motional parameters in both compounds. The interlayer waters in MoO₃ · 2H₂O undergo 180° flips with different parameters. An assumed Arrhenius-type temperature dependence of correlation times leads to preexponential factors which are “anomalously” low. The possible involvement of temperature-dependent activation barriers is discussed.