Reflectron MALDI TOF and MALDI TOF/TOF mass spectrometry reveal novel structural details of native lipooligosaccharides

Lipooligosaccharides (LOS) are powerful Gram-negative glycolipids that evade the immune system and invade host animal and vegetal cells. The structural elucidation of LOS is pivotal to understanding the mechanisms of infection at the molecular level. The amphiphilic nature of LOS has been the main obstacle for structural analysis by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS). Our approach has resolved this important issue and has permitted us to obtain reflectron MALDI mass spectra of LOS to reveal the fine chemical structure with minimal structural variations. The high-quality MALDI mass spectra show LOS species characteristic of molecular ions and defined fragments due to decay in the ion source. The in-source decay yields B-type ions, which correspond to core oligosaccharide(s), and Y-type ions, which are related to lipid A unit(s). MALDI tandem time-of-flight (TOF/TOF) MS of lipid A allowed for the elucidation of its structure directly from purified intact LOS without the need for any chemical manipulations. These findings constitute a significant advancement in the analysis of such an important biomolecule by MALDI MS.     

Electrospray tandem mass spectrometry of new porphyrin amino acid conjugates

Porphyrin amino acid conjugates with one or two porphyrin units were analyzed by electrospray ionization tandem mass spectrometry (ESI-MS/MS). The ESI-MS spectra of all the porphyrins studied, obtained in positive ion mode, show the presence of the corresponding protonated molecule [M+H]+; ESI-MS spectra of diporphyrinyl compounds also show the doubly charged ions [M+2H]2+. The fragmentations of these ions induced by collision with argon were studied (ESI-MS/MS). ESI-MS/MS gives detailed structural information about the amino acids associated with the porphyrin. Cleavage of the bonds in the vicinity of the porphyrin moiety and those involving the side chain of amino acid residues gives structural information about this type of association. A fragmentation common to all derivatives corresponds to the cleavage of the phenyl-CO bond. The expected cleavage of the amide bond, that links the porphyrin to the amino acid moiety, is a minor fragmentation, which in some cases is even absent. The MS/MS spectra of the monoporphyrinyl derivatives show product ions characteristic of the amino acid linked to the porphyrin; the fragmentation also indicates when the amino acids has a terminal carboxylic group or a terminal ester group. The fragmentations of the diporphyrinyl compounds occur mainly by the cleavage of the spacer, leading, in the case of the doubly charged ions, to predominantly mono-charged ions, indicating a preferential location of the two protons in separated porphyrinic units.     

Identification of 2D-gel proteins: a comparison of MALDI/TOF peptide mass mapping to mu LC-ESI tandem mass spectrometry

A comparative analysis of protein identification for a total of 162 protein spots separated by two-dimensional gel electrophoresis from two fully sequenced archaea, Methanococcus jannaschii and Pyrococcus furiosus, using MALDI-TOF peptide mass mapping (PMM) and mu LC-MS/MS is presented. 100% of the gel spots analyzed were successfully matched to the predicted proteins in the two corresponding open reading frame databases by mu LC-MS/MS while 97% of them were identified by MALDI-TOF PMM. The high success rate from the PMM resulted from sample desalting/concentrating with ZipTip(C18) and optimization of several PMM search parameters including a 25 ppm average mass tolerance and the application of two different protein molecular weight search windows. By using this strategy, low-molecular weight (<23 kDa) proteins could be identified unambiguously with less than 5 peptide matches. Nine percent of spots were identified as containing multiple proteins. By using mu LC-MS/MS, 50% of the spots analyzed were identified as containing multiple proteins. mu LC-MS/MS demonstrated better protein sequence coverage than MALDI-TOF PMM over the entire mass range of proteins identified. MALDI-TOF and PMM produced unique peptide molecular weight matches that were not identified by mu LC-MS/MS. By incorporating amino acid sequence modifications into database searches, combined sequence coverage obtained from these two complimentary ionization methods exceeded 50% for approximately 70% of the 162 spots analyzed. This improved sequence coverage in combination with enzymatic digestions of different specificity is proposed as a method for analysis of post-translational modification from 2D-gel separated proteins.     

A case study of de novo sequence analysis of N-sulfonated peptides by MALDI TOF/TOF mass spectrometry

The simplicity and sensitivity of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry have increased its application in recent years. The most common method of "peptide mass fingerprint" analysis often does not provide robust identification. Additional sequence information, obtained by post-source decay or collision induced dissociation, provides additional constraints for database searches. However, de novo sequencing by mass spectrometry is not yet common practice, most likely because of the difficulties associated with the interpretation of high and low energy CID spectra. Success with this type of sequencing requires full sequence coverage and demands better quality spectra than those typically used for data base searching. In this report we show that full-length de novo sequencing is possible using MALDI TOF/TOF analysis. The interpretation of MS/MS data is facilitated by N-terminal sulfonation after protection of lysine side chains (Keough et al., Proc. Natl. Acad. Sci. U.S.A. 1999, 96, 7131-7136). Reliable de novo sequence analysis has been obtained using sub-picomol quantities of peptides and peptide sequences of up to 16 amino acid residues in length have been determined. The simple, predictable fragmentation pattern allows routine de novo interpretation, either manually or using software. Characterization of the complete primary structure of a peptide is often hindered because of differences in fragmentation efficiencies and in specific fragmentation patterns for different peptides. These differences are controlled by various structural parameters including the nature of the residues present. The influence of the presence of internal Pro, acidic and basic residues on the TOF/TOF fragmentation pattern will be discussed, both for underivatized and guanidinated/sulfonated peptides.     

Application of MALDI TOF/TOF mass spectrometry and collision-induced dissociation for the identification of disulfide-bonded peptides

This paper describes a method for the fast identification and composition of disulfide-bonded peptides. A unique fragmentation signature of inter-disulfide-bonded peptides is detected using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF)/TOF mass spectrometry and high-energy collision-induced dissociation (CID). This fragmentation pattern identifies peptides with an interconnected disulfide bond and provides information regarding the composition of the peptides involved in the pairing. The distinctive signature produced using CID is a triplet of ions resulting from the cleavage of the disulfide bond to produce dehydroalanine, cysteine or thiocysteine product ions. This method is not applicable to intra-peptide disulfide bonds, as the cleavage mechanism is not the same and a triplet pattern is not observed. This method has been successfully applied to identifying disulfide-bonded peptides in a number of control digestions, as well as study samples where disulfide bond networks were postulated and/or unknown.     

A novel MALDI LIFT-TOF/TOF mass spectrometer for proteomics

A new matrix-assisted laser-desorption/ionization time-of-flight/time-of-flight mass spectrometer with the novel "LIFT" technique (MALDI LIFT-TOF/TOF MS) is described. This instrument provides high sensitivity (attomole range) for peptide mass fingerprints (PMF). It is also possible to analyze fragment ions generated by any one of three different modes of dissociation: laser-induced dissociation (LID) and high-energy collision-induced dissociation (CID) as real MS/MS techniques and in-source decay in the reflector mode of the mass analyzer (reISD) as a pseudo-MS/MS technique. Fully automated operation including spot picking from 2D gels, in-gel digestion, sample preparation on MALDI plates with hydrophilic/hydrophobic spot profiles and spectrum acquisition/processing lead to an identification rate of 66% after the PMF was obtained. The workflow control software subsequently triggered automated acquisition of multiple MS/MS spectra. This information, combined with the PMF increased the identification rate to 77%, thus providing data that allowed protein modifications and sequence errors in the protein sequence database to be detected. The quality of the MS/MS data allowed for automated de novo sequencing and protein identification based on homology searching.     

Characterization of wheat gluten proteins by hplc and MALDI TOF mass spectrometry

We have performed a detailed characterization and identification of wheat gluten proteins obtained from the Teal variety of Canadian hard red spring wheat. RP-HPLC separation of the sample into 35 fractions has reduced the spectral complexity; this was followed by MALDI mass spectrometry (MS), which showed the presence of six or fewer resolved protein components above 20 kDa in each RP-HPLC fraction, giving a total of 93 MS resolved peaks. These included 17 peaks in the ω-gliadin fractions (F1–4), 12 in the high molecular weight (HMW) glutenin subunit fractions (F5–8), 59 in the α- and β-gliadins and low molecular weight (LMW) glutenin subunit fractions (F9–31) and 5 peaks in the γ-gliadin fractions (F32–35). Peptide maps of tryptic digests of HPLC fractions were obtained from a tandem quadrupole time-of-flight mass spectrometer (MALDI QqTOF MS) and were submitted to the ProFound search engine. HMW glutenin subunits including Ax2*, Dx5, Bx7, and Dy10 (consistent with the known profile of Teal), and LMW glutenin subunits including six from group 3 type II and 1 from group 2 type I, were identified with reasonable sequence coverage from HPLC fraction 5, 7, 17, and 18. The identities of the peptides attributed to selected gluten proteins were confirmed using MS/MS with BioMultiView to match the predicted and measured partial amino acid sequences. Because of incomplete wheat DNA databases, many wheat gluten proteins could not be identified. These results suggest that the combination of RP-HPLC with MS and MS/MS techniques is a promising approach for the characterization of wheat gluten proteins.     

MALDI TOF mass spectrometry for the investigation of the structure of ruthenium carborane complexes

The results of investigation of ruthenium carborane complexes with chelating diphosphine ligands by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry are presented. The influence of matrix, power of laser irradiation, and analysis mode on the substrate fragmentation and spectra is analyzed. It is shown that the best spectra are recorded in the negative ion mode with DCTB as a matrix.     

Negative-mode MALDI mass spectrometry for the analysis of pigments using tetrathiafulvalene as a matrix

Negative-mode matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) analysis of industrial pigments was performed using tetrathiafulvalene (TTF), an electron donating compound, as a matrix. Comparing with other matrices such as tetracyanoquinodimethane (TCNQ), dithranol, 2-hydroxy-6-nitroaniline (HNA), and harmine hydrochloride, the most abundant analyte ions were produced by the TTF as radical or deprotonated anions. In addition, fragment ions in the negative mode of operation are also found to be much less abundant than those in the positive mode of operation.     

Small molecule analysis by MALDI mass spectrometry

This review focuses on the application of matrix assisted laser desorption/ionization (MALDI) mass spectrometry to the characterization of molecules in the low mass range (<1500 Da). Despite its reputation to the contrary, MALDI is a powerful technique to provide both qualitative and quantitative determination of low molecular weight compounds. Several approaches to minimize interference via sample preparation and matrix selection are discussed, as well as coupling of MALDI to liquid and planar chromatographic techniques to extend its range of applicability.     

Need for database extension for reliable identification of bacteria from extreme environments using MALDI TOF mass spectrometry

The ability of MALDI TOF MS (matrix-assisted laser desorption ionisation time-of-flight mass spectrometry) to identify cultivable microflora from two waste disposal sites from non-ferrous metal industry was analysed. Despite the harsh conditions (extreme pH values and heavy metal content in red mud disposal site from aluminium production or high heavy metal content in nickel sludge), relatively high numbers of bacteria were recovered. In both environments, the bacterial community was dominated by Gram-positive bacteria, especially by actinobacteria. High-quality MALDI TOF mass spectra were obtained but most of the bacteria isolates could be not identified using MALDI Biotyper software. The overall identification rate was lower than 20 %; in two of the environments tested identification rates were lower than 10 %. As a dominant bacterial species, Microbacterium spp. in drainage water from an aluminium red mud disposal site near ?iar nad Hronom, Bacillus spp. in red mud samples from the same site, and Arthrobacter spp. from nickel smelter sludge near Sereï were identified by a combination of the Biolog system and 16S rRNA sequence analysis. As the primary focus of the MALDI TOF MS-based methodology is directed towards medically important bacteria, reference database spectra expansion and refinement are needed to improve the ability of MALDI TOF MS to identify environmental bacteria, especially those from extreme environments.     

Comparison of flow injection analysis electrospray mass spectrometry and tandem mass spectrometry and electrospray high-field asymmetric waveform ion mobility mass spectrometry and tandem mass spectrometry for the determination of underivatized amino acids

Twenty proteinogenic amino acids (AAs) were determined without derivatization using flow injection analysis followed by electrospray ionization mass spectrometry and tandem mass spectrometry (ESI-MS and ESI-MS/MS) and electrospray ionization high-field asymmetric waveform ion mobility mass spectrometry and tandem mass spectrometry (ESI-FAIMS-MS and ESI-FAIMS-MS/MS), in positive and negative ionization modes. Three separate sets of ESI-FAIMS conditions were used for the separation and detection of the 20 AAs. Typically ESI-FAIMS-MS showed somewhat improved sensitivity and significantly better signal-to-noise ratios than ESI-MS mainly due to the elimination of background noise. However, the difference between ESI-FAIMS-MS and ESI-MS/MS was significantly less. ESI-FAIMS was able to partially or completely resolve all the isobaric amino acid overlaps such as leucine, isoleucine and hydroxyproline or lysine and glutamine. Detection limits for the amino acids in ESI-FAIMS-MS mode ranged from 2 ng/mL for proline to 200 ng/mL for aspartic acid. Overall, ESI-FAIMS-MS is the preferred method for the quantitative analysis of AAs in a hydrolyzed yeast matrix.     

Diastereomeric differentiation of norbornene amino acid peptides by electrospray ionization tandem mass spectrometry

A new class of diastereomeric pairs of non‐natural amino acid peptides derived from butyloxycarbonyl (Boc‐)protected cis‐(2S,3R)‐ and trans‐(2S,3S)‐β‐norbornene amino acids including a monomeric pair have been investigated by electrospray ionization (ESI) tandem mass spectrometry using quadrupole time‐of‐flight (Q‐TOF) and ion‐trap mass spectrometers. The protonated cis‐BocN‐β‐nbaa (2S,3R) (1) (βnbaa = β‐norbornene amino acid) eliminates the Boc group to form [M+H–Boc+H]⁺, whereas an additional ion [M+H–C₄H₈]⁺ is formed from trans‐BocN‐β‐nbaa (2S,3S) (2). Similarly, it is observed that the peptide diastereomers (di‐, tri‐ and tetra‐), with cis‐BocN‐β‐nbaa (2S,3R)‐ at the N‐terminus, initially eliminate the Boc group to form [M+H–Boc+H]⁺ which undergo further fragmentation to give a set of product ions that are different for the peptides with trans‐BocN‐β‐nbaa (2S,3S)‐ at the N‐terminus. Thus the Boc group fragments differently depending on the configuration of the amino acid present at the N‐terminus. It is also observed that the peptide bond cleavage in these peptides is less favoured and most of the product ions are formed due to retro‐Diels‐Alder fragmentation. Interestingly, sodium‐cationized peptide diastereomers mainly yield a series of retro‐Diels‐Alder fragment ions which are different for each diastereomer as they are formed starting from [M+Na–Boc+H]⁺ in peptides with cis‐BocN‐β‐nbaa (2S,3R)‐ at the N‐terminus, and [M+Na–C₄H₈]⁺ in peptides with trans‐BocN‐β‐nbaa (2S,3S)‐ at the N‐terminus. All these results clearly indicate that these diastereomeric pairs of peptides yield characteristic product ions which help distinguish the isomers. Copyright © 2009 John Wiley & Sons, Ltd.     

A graphics display-oriented strategy for the amino acid sequencing of peptides by tandem mass spectrometry

Summary A graphics display-oriented method for the computer-aided interpretation of the mass spectrum of a peptide in terms of its amino acid sequence is presented. The spectrum is obtained by collision induced decomposition of the protonated molecular ion (M+H)⁺ of the peptide generated by fast atom bombardment in the first double focussing mass analyzer of a tandem mass spectrometer and the product ion mass spectrum (CID spectrum) recorded by the second double focussing mass analyzer. The algorithm displays all series of peaks differing by the mass of -NH-CHR-CO- for the various amino acids. This display, which is very fast and can be augmented through interrogation by the user, greatly facilitates the determination of the amino acid sequence. The method is demonstrated on the spectra of a undecapeptide of (M+H)⁺ m/z = 1208.2 and a tetradecapeptide of (M+H)⁺ m/z = 1758.9.

---

Bestimmung der Aminosäure-Sequenz von Peptiden durch Tandem-Massenspektrometrie mit Hilfe eines graphischen Display

     

Recombinant immobilized rhizopuspepsin as a new tool for protein digestion in hydrogen/deuterium exchange mass spectrometry

Hydrogen/deuterium (H/D) exchange coupled to mass spectrometry is nowadays routinely used to probe protein interactions or conformational changes. The method has many advantages, e.g. very low sample consumption, but offers limited spatial resolution. One way to higher resolution leads through the use of different proteases or their combinations. In the present work we describe recombinant production, purification and use of aspartic protease zymogen from Rhizopus chimensis, protease type XVIII (EC 3.4.23.6), commonly referred to as rhizopuspepsinogen (Rpg). The enzyme was expressed in Escherichia coli, refolded and purified to homogeneity. A typical yield was approximately 100 mg of pure enzyme per 1 L of original bacterial culture. The kinetics of protease activation, i.e. removal of the propeptide achieved by autolysis in an acidic environment, was followed by mass spectrometry. The digestion efficiency was tested for the protease in solution as well as for the immobilized enzyme. Apomyoglobin was successfully digested under all conditions tested and the protease displayed very low or no autodigestion. The results outperformed those obtained with commercial protease where the digestion of apomyoglobin was incomplete and accompanied by many contaminating peptides. Taken together, the recombinant protease type XVIII can be considered as a new and highly efficient tool for H/D exchange followed by mass spectrometry. Copyright © 2009 John Wiley & Sons, Ltd.     

Heparin-like glycosaminoglycan/amine salt-bridge interactions: a new potential tool for HLGAGs analysis using mass spectrometry

Characterization of glycosaminoglycans poses a challenge for current analytical techniques, as they are highly acidic, polydisperse and heterogeneous compounds. The purpose of this study is the separation and analysis of a partially depolymerized heparin-like glycosaminoglycan by on-line ion-pairing reversed-phase high-performance liquid chromatography/electrospray mass spectrometry. The gas-phase behavior of two synthesized glycosaminoglycans has been investigated. Dibutylamine was found to be the best suited ion-pairing reagents for mass spectrometry analysis. The optimized ion-pairing conditions provide reproducible and easily interpretable electrospray mass spectra in both negative and positive ESI modes. The glycosaminoglycans are detected as a non-covalent complex with amines. In fact, the observed ionic species and their gas-phase dissociation under CID conditions revealed the presence of salt bridge interactions in the gas phase.