Synthesis and characterization of Mn-, La-Mn- and La-Ca-Mn-citrates as precursors for LaMnO<Subscript>3</Subscript> and La<Subscript>1−x</Subscript>Ca<Subscript>x</Subscript>MnO<Subscript>3</Subscript>

Mn-, LaMn- and LaCaMn-citrates were synthesized at 60–120°C in ethylene glycol medium using chlorides or nitrates as metal sources. Their composition, IR spectra and thermal decomposition were studied. Equimolar La/Mn ratio has been established in the complex, prepared from chloride solution with the same initial composition of the metals. In the isolated three-metallic complex the molar ratio of the metals deviates from the composition in the initial solution. The final products of the heating of Mn- and mixed-metal LaMn-citrates at 1000°C are phase-homogeneous Mn₃O₄ (hausmannite) and LaMnO₃ respectively. Parasitic phase(s) are observed in La_xCa_1−xMn_yO₃, produced from LaCaMn-citrate.     

Cyclodextrin inclusion complexes as novel MOCVD precursors for potential cobalt oxide deposition

The potential use of the inclusion complexes of β‐cyclodextrins with metal halides as novel precursors in MOCVD applications was examined in terms of microstructure, thermal stability and chemical modifications during heating. The investigation was especially focused on the inclusion complex of β‐cyclodextrin with cobalt iodide for cobalt oxide thin film deposition. The general composition assigned to the dextrin's inclusion complex was: (β‐CD)₂^?CoI₇^?11H₂O. It was found that the inclusion complex of β‐cyclodextrin with CoI₂ may prove a promising alternative to traditional metalorganic or organometallic Co‐precursors for precise CVD applications. The sublimation temperature must be preferably in the range 70–125 °C, and the decomposition temperature (substrate temperature) in the range of 350–400 °C. Three distinct regions can be recognized by heating: transformation of tightly bound water molecules into easily movable ones, sublimation of iodine ions and Co atoms oscillation and thermal decomposition of the glycositic ring into volatile by‐products. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of two binuclear iron(III) complexes of aminoethanol derivatives of aminophenol as models for non-heme iron enzymes active sites

Two aminoethanol derivatives of aminophenol ligands were synthesized and characterized by IR and ¹H NMR spectroscopies. The binuclear iron(III) complexes of these ligands have been prepared and characterized by IR, ¹H NMR and UV-Vis spectroscopic techniques, cyclic voltammetry, single crystal X-ray diffraction and magnetic susceptibility studies. X-ray analysis revealed binuclear complexes, Fe₂(L₂), in which Fe(III) centers are surrounded by two phenolate and hydroxyl oxygen atoms, and amine nitrogens of the ligands. The metal active sites of both complexes are held together by the two above mentioned hydroxyl bridges. Variable temperature magnetic susceptibility indicates antiferromagnetic coupling between the iron centers of both complexes. This exchange coupling is stronger for Fe₂(L^ae)₂, such that it shows a room temperature strong coupling between the two iron centers. The investigated complexes undergo irreversible electrochemical oxidation and reduction.     

Solid-state synthesis and characterization of Ca-substituted YAlO3 as electrolyte for solid oxide fuel cells

ABO₃-type oxides are recently being explored as solid electrolytes for solid oxide fuel cells. The objective of this work was to study an ABO₃-type perovskite oxide, YAlO_3, for its electrical properties and its suitability as a solid electrolyte. The undoped and doped compositions of Y_{1 - x}Ca_xAlO_{3 - d}( x = 0 - 0.25 ) {{\hbox{Y}}_{1 - x}}{\hbox{C}}{{\hbox{a}}_x}{\hbox{Al}}{{\hbox{O}}_{3 - \delta }}\left( {x = 0 - 0.25} \right) have been synthesized. The phase purity of the samples has been investigated by X-ray diffraction studies. The electrical conductivity studies have been performed using ac impedance spectroscopy in the range 200–800 °C in air. The doped YAlO₃ compositions exhibit a total conductivity of about 1 mS/cm at 800 °C. The microstructural evaluation of the samples has been conducted by scanning electron microscopy and energy dispersive spectrum analysis.     

Synthesis and characterization of homo- and heterobimetallic niobium and tantalum peroxo-polyaminocarboxylato complexes and their use as single or multiple molecular precursors for Nb-Ta mixed oxides

New water-soluble bimetallic peroxo complexes of niobium^V and/or tantalum^V with high-denticity polyaminocarboxylate ligands have been prepared, characterized from the spectroscopic point of view, and used as molecular precursors for Nb-Ta mixed oxides. Four new homobimetallic complexes, (gu)₃[Nb₂(O₂)₄(dtpaO₃)]·3H₂O 1, (gu)₃[Ta₂(O₂)₄(dtpaO₃)]·5H₂O 2, (gu)₃[Nb₂(O₂)₄(HtthaO₄)]·2H₂O 4 and (gu)₃[Ta₂(O₂)₄(HtthaO₄)]·3H₂O 5 and the corresponding heterometallic complexes, (gu)₃[NbTa(O₂)₄(dtpaO₃)]·2.5H₂O 3 and (gu)₃[NbTa(O₂)₄(HtthaO₄₎]·2H₂O 6 have been obtained. In these compounds, the in situ oxidation of the nitrogen atoms of the PAC ligands into N-oxide groups has been evidenced by IR spectroscopy and mass spectrometry. The thermal treatment of the homonuclear complexes in air at 700 or 800 °C, depending on the Ta content, provided Nb₂O₅ or Ta₂O₅ while the heteronuclear compounds led to the solid solution TaNbO₅. BET and SEM measurements have been carried out and comparison of the morphology of the samples prepared from homo- and heterometallic precursors is discussed.     

Synthesis and electrical characterization of Li0.30Ca0.35TaO3 perovskite synthesized via a polymerized complex route

The synthesis of Li_0.30Ca_0.35TaO₃ perovskite by a Pechini-type polymerizable precursor method is carefully described. The thermal decomposition of the precursor and the formation of a pure perovskite phase were investigated by means of differential thermal analysis-thermogravimetric analysis (DTA-TGA) and XRD techniques. A pure and well-crystallized phase has been obtained at a lower temperature and with a much shorter synthesis time than the phase obtained by conventional solid-state reaction method. The morphology of the powder after heating at 1300 °C was observed by laser granulometry, Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). Impedance spectroscopy data allowed us to determine the electrical properties, i.e., permittivity and dc-conductivity, of the bulk and grain boundaries. The results are discussed on the assumption of the brick layer model.     

Ferrocenyl and pyridyl methylenepyrans as potential precursors of organometallic electron-rich extended bipyrans: Synthesis, characterization and crystal structure

Ferrocenyl and pyridyl methylenepyrans were obtained from a Wittig reaction between a pyran phosphorane and ferrocenyl or pyridyl-aldehydes. The nucleophilic nature of the exocyclic C-C bond allowed the formylation of these compounds by a Vilsmeier type reaction. All the new products were characterized by IR spectroscopy, ¹H and ¹³C NMR spectroscopy, mass spectroscopy and (or) elemental analysis. Electrochemistry of representative compounds 2, 10 and 13 was undertaken.In addition, a crystal structure of the ferrocenylpyranylidene aldehyde 5 was described, and the pyrylium character of this compound was specified.     

Synthesis,characterization and DNA-binding properties of Ru(II) complexes coordinated by ofloxacin as potential antitumor agents

Three Ru complexes coordinated by oxfloxacin, [Ru(L)₂(OFX)]Cl·2H₂O (L = bpy, 1; dmbpy, 2; phen, 3; and OFX = ofloxacin), were synthesized and characterized. These complexes can inhibit the growth of cervical cancer HeLa cells efficiently. Furthermore, these three complexes exhibited excellent binding affinities with DNA, as confirmed by spectroscopy methods and viscosity experiments. Therefore, the synthesized Ru(II) complexes have excellent DNA-binding abilities with potential applications in cancer chemotherapy.     

LaCo0.9Cu0.1O3的蔗糖溶胶-凝胶法合成及二甲苯催化氧化性能研究

蔗糖溶胶 凝胶法合成了稀土钙钛矿型复合氧化物LaCo0 .9Cu0 .1 O3,并对其进行了XRD ,BET ,TPR表征和二甲苯催化氧化性能测试 ,并与柠檬酸溶胶 凝胶法作了比较。结果表明 ,蔗糖作为络合剂成胶和干胶容易 ,粒径较小 ,具有进一步降低LaCo0 .9Cu0 .1 O3形成温度的作用 ,以蔗糖作为络合剂在 70 0℃所制备的催化剂LaCo0 .9Cu0 .1 O3低温活性较好。     

Synthesis and characterization of chemically modified polystyrene as processable carbon fiber precursors

In this study, the chemically modified polystyrene was studied for improvement of polystyrene which had low carbon yield, as a carbon fiber precursor. The polystyrene was synthesized with divinylbenzene which was used as a cross-linking agent by the solution polymerization method. Then the synthesized polystyrene was nitrated with sulfuric and nitric acids solution (H₂SO₄/HNO₃) followed by reduction to form nitrogen-functional groups. The surface properties of the modified polystyrene were investigated by Fourier transfer infrared spectroscopy to confirm the introduction of functional groups on the modified polystyrene surfaces. The thermal properties of the modified polystyrene were measured by thermogravimetric analysis and differential scanning calorimetry. The morphologies of the electrospun polystyrene fibers by a chemical modification were observed by scanning electron microscopy. From the results, the nitrogen-functional groups were introduced on the modified polystyrene surfaces which affected the quantity of functional groups. Also, the chemical treatment affected the carbon yield of the polystyrene owing to the introduction of nitrogen-functional groups on polystyrene surfaces. Consequently, it was concluded that the chemical treatment of polystyrene fibers enables it to be used as a possible carbon fiber precursor.     

Synthesis and characterization of processable polyborate precursors

Polyborates have been formed by disproportionation and polycondensation of trimethoxyboroxine and also of trimethoxyboroxine and boric acid. The crtiical role of stoichiometry in the formation of polyborates without requiring incorporation of a metal counter ion is revealed. The emphasis is on integration of this chemistry with fabrication processes. Incorporation of an appropriate linear organic polymer is shown to yield the required rheological and thermal characteristics in this regard. These polyborates are inferred to be suitable as precursors for boron nitride in geometrical forms that can be processed as supported structures. However, they are also determined to be unsuitable as precursors for boron nitride fibers, oriented or isotropic, primarily due to their low glass transition temperature.     

Convenient synthesis of dithiafulvene carbene complexes as potential precursors of extended TTF

The condensation of α-carbanion of Fischer-type carbene complex with 2-thiomethyl-1,3-dithiolium salts 1 gave new heterocyclic organometallic carbenes 2 potentially precursors of extended TTF. Reaction of allylic carbanion 4 derived from (methoxypropenyl)pentacarbonyl carbene complex afforded a mixture of monoheterocyclic condensation products 7 and diheterocyclic carbene complexes 8 produced from successive α and γ attacks of the heterocyclic cations.     

Synthesis and characterization of new thorium and uranium phenolate complexes

The reaction between the chelating amino bisphenole ligand (ONOO)H₂ (1) and (ONNO)H₂ (2) with an excess of NaH gives the corresponding bis-sodium salts 3 and 4 quantitatively.The salts were reacted with thorium tetrachloride at room temperature to obtain the corresponding (ONOO)ThCl₂ (5) and (ONNO)ThCl₂ (6) complexes.However, ThCl₄ and UCl₄ react with (3) at higher temperatures to give the corresponding isomorphous homoleptic complexes (ONOO)₂Th (7) and (ONOO)₂U (8).We have also synthesized and characterized a thorium salicylaldiminato complex L₃ThCl (11) , in order to study the effect of the bridged ligand on the molecular structure.     

Synthesis of inorganic polymers as glass precursors and for other uses: Pre-ceramic block or graft copolymers as potential precursors to composite materials

Pre-ceramic block or graft copolymers may offer entrée into nanocomposite ceramics provided the two homopolymers are immiscible and one can carefully control the size of the blocks or grafts. We are exploring the possibility of making copolymers from methylsilsesquioxane, ? [MeSi(O)_1.5]_x? , (SiO), a precursor to ‘black glass’ and the polysilazane, ? [MeHSiNH]_x? , (SiMe), a precursor to silicon carbide nitride. Our initial effors have been directed towards delineating the chemical transformations that SiO, prepared by room-temperature catalytic redistribution of ? [MeHSiO]_x? using Cp₂ TiMe₂ as the catalyst (0.1 wt %), undergoes as it is heated to 900 °C in nitrogen. We find that, although Cp₂ TiMe₂ will not catalyze the redistribution of SiMe at room temperature, in the presence of even small amounts of ? [MeHSiO]_x? it is an active catalyst precursor and a copolymer can be formed. Spectra and chemical composition studies on the pyrolysis products of the copolymers and SiO are described.     

Synthesis and characterization of stannacyclododecane-yl-dithiocarbamates

Thirteen new stannacyclododecane dithiocarbamate complexes have been prepared by reacting 12-chloro-12-n-butyl-1,11-dioxa-4,8-dithia-12-stannacyclododecane (1) and 12-chloro-12-n-butyl-1,4,8,11-tetrathia-12-stannacyclododecane (2) with pyrrolidine-, morpholine-, thiomorpholine-, piperidine-, piperazinebis-, and 3-pyrroline-carbodithioates, respectively, as well as with diethyl-dithiocarbamate. All complexes were characterized by elemental analyses, IR, EI-MS, and NMR (¹H, ¹³C, and ¹¹⁹Sn) studies. The spectroscopic data suggest the replacement of the chlorides by the corresponding dithiocarbamates with monodentate coordination, leading to six-coordinate tin atoms in all the cases.     

Synthesis and characterization of novel polymer-drug conjugate based on the anhydride containing copolymer as a potential method for drug carrier

5-Fluorouracil (5FU) is in clinical use as an antitumor agent for the treatment of several types of solid tumors and cancers. However, development of drug resistance within the tumor cells and side effects has been a major limitation for the clinical use of 5FU. Preparation polymer-5FU conjugation is a promising potential antitumor drug and alternative pathway that could be used to treatment of cancer. For this purpose, water soluble poly(maleic anhydride-alt-N-vinyl pyrrolidone)[Poly(MA-alt-NVP)] is synthesized via charge transfer complex (CTC) copolymerization with benzoyl peroxide as an initiator at 80°C under nitrogen atmosphere. CTC mechanism is formed between through MA and NVP by determined using Uv-vis spectroscopy. Molar absorption coefficient (?^AD) and equilibrium constant (K^AD) of the complex are determined by Scott equation. The results obtained from indicate that copolymerization of MA:NVP system is preceded via alternating mechanism. The compositions of synthesized copolymers are also investigated by elemental analysis and the reactivity ratios of these monomers are calculated by using the elemental analysis data through Kelen-Tüdös, Mayo-Lewis, Fineman-Ross and Inverted Fineman-Ross equations. For preparation of polymer-drug conjugate, chemical modification is employed between the copolymer and 5FU. Polymer-drug conjugate and conjugation mechanism are enlightened by ATR-FTIR, NMR, HR-Raman and XRD methods.     

Synthesis and structural characterization of nitrite-coordinating CoII and CoIII complexes as models for the reaction center of Co-substituted nitrite reductase

Co^II and Co^III complexes containing nitrite and tridentate aromatic amine compounds [bis(6-methyl-2-pyridylmethyl)amine (Me₂bpa) and bis(2-pyridylmethyl)amine (bpa)] have been prepared as models of the catalytic center in Co-substituted nitrite reductase: [Co^II(Me₂bpa)(NO₂)Cl]₂ · acetone (2), Co^II(Me₂bpa)(NO₂)₂ (3), Co^II(bpa)(NO₂)Cl (4), Co^II(bpa)(NO₂)₂ (5), Co^III(Me₂bpa)(NO₂)(CO₃) (6), and Co^III(bpa)(NO₂)₃ (7). The X-ray crystal structure analyses of these Co^II and Co^III complexes indicated that the geometries of the cobalt centers are distorted octahedral and the Me₂bpa and bpa with three nitrogen donors exhibit mer- (2, 3, and 7) and fac-form (4 and 6). The coordination mode of nitrite depends on the cobalt oxidation state, to Co^II through the oxygen (nitrito coordination, O- and O,O-coordination) and to Co^III through nitrogen (nitro coordination, N-coordination mode). These findings are consistent with the results of their IR spectra, except that another oxygen of the O-coordinated nitrito group in 3 might interact weakly with Co^II according to its IR spectrum. Reductions of the nitrite in 2, 3, 4, and 5 to nitrogen monoxide were not accelerated in the presence of proton, perhaps due to the nitrito coordination in these Co^II complexes.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-ethoxy-3-methoxy-benzaldehyde and their rhenium(I) complexes

The ligands (HL¹, HL² and HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods, and the structures of the ligands have been elucidated by X-ray diffraction. In the case of HL¹, we have tried the reaction with [ReX(CO)₅] (X = Br, Cl) in toluene and we proved the formation of the adduct also by this way by the isolation of single crystals of 1a′ · ½C₇H_8.     

Synthesis and characterization of mesoporous silica from selectively acid-treated saponite as the precursors

Mesoporous silicas were synthesized by hydrothermal treatment of selectively acid-treated saponite (an ideal structural formula: Na(1/3)Mg(3)(Si(11/3)Al(1/3))O(10)(OH)(2)), having a 2:1 type layered structure as the silica source and its porous properties were examined and compared with that from kaolinite (an ideal structural formula: Al(2)Si(2)O(5)(OH)(4)), having a 1:1 type layered structure. Synthetic saponite was selectively leached in H(2)SO(4) solutions with various concentrations (0.05-1 M) at 70 degrees C for 0.5 h. The resulting products (precursors) were mixed with cetyltrimethylammonium bromide (CTABr), NaOH and H(2)O, hydrothermally treated at 110 degrees C and removed the CTABr by calcining at 560 degrees C. A hexagonal mesoporous phase was obtained with higher Si/(Al(+Mg)) ratios of the resulting precursors. The XRD patterns of these products show the peaks assigned by a hexagonal lattice with a(0)=4.0-4.6 nm and the crystallinity becomes higher with higher Si/(Al(+Mg)) ratios of the precursors. The specific surface area (S(BET)) values of the present mesoporous silicas range from 800 to 1100 m(2)/g at CTABr/precursor=0.1 and although they are not as high as those from precursors prepared from calcining and acid-treatment of kaolinite (1420 m(2)/g), they are increased to 1400-1500 m(2)/g by increasing the ratio CTABr/precursor 0.2. The reason for the difference in the optimum preparation conditions between saponite and kaolinite may be attributed to the difference in the linkage of the SiO(4) tetrahedra in these precursors (i.e. layered or framework structures), which result in great differences in the selective leaching rates and structures of the resulting silica-rich products.