Spectrofluorometric trace determination of cerium(III) in sodium hexametaphosphate solutions

The use of sodium hexametaphosphate in the spectrofluorometric determination of trace amounts of cerium(III) ions is described. Sodium hexametaphosphate acts as a specific reagent for enhancing the fluorescence intensity of cerium(III) in aqueous solutions. The apparent excitation and fluorescence wavelength used are 304 and 344 nm, respectively. Maximum fluorescence intensity is obtained by irradiating Ce(III) dissolved in 5.346 g/l sodium hexametaphosphate solution at room temperature. The fluorescence varies linearly with the concentration of cerium(III) in the range of 0.001–60 g/ml. The coefficient of variation for 45 g/ml Ce(III) in 5.346 g/l sodium hexametaphosphate solution is 1. The quenching effects of other lanthanides and some inorganic anions are given. This technique permits a direct and rapid determination of cerium(III) in rare earth mixtures and cerium concentrates.     

Removal of cerium(III) species from solutions using granulated zeolites

The possibility of the use of granulated zeolites for the removal of cerium(III) species from solutions labelled with cerium-141 radioisotope, has been investigated. Measurements of cerium(III) species in solutions and of the distribution of cerium(III) species in column fillings (granulated zeolites), after passing the solution through columns filled with various granulated zeolites have shown that cerium(III) ions can be effectively removed from weakly acidic solutions using granulated mordenite. The influence of pH, of the concentration of cerium(III) ions in solution and of the flow rate of the solution through the column on the efficiency of cerium(III) species removal and on the distribution of cerium(III) species in the column has been investigated. The mechanism of exchange of cerium(III) ions from solution with sodium ions from granulated zeolites has been discussed.     

Spectrofluorometric trace determination of cerium(III) in sodium hexametaphosphate solutions

The use of sodium hexametaphosphate in the spectrofluorometric determination of trace amounts of cerium(III) ions is described. Sodium hexametaphosphate acts as a specific reagent for enhancing the fluorescence intensity of cerium(III) in aqueous solutions. The apparent excitation and fluorescence wavelength used are 304 and 344 nm, respectively. Maximum fluorescence intensity is obtained by irradiating Ce(III) dissolved in 5.346 g/l sodium hexametaphosphate solution at room temperature. The fluorescence varies linearly with the concentration of cerium(III) in the range of 0.001-60 microg/ml. The coefficient of variation for 45 microg/ml Ce(III) in 5.346 g/l sodium hexametaphosphate solution is 1. The quenching effects of other lanthanides and some inorganic anions are given. This technique permits a direct and rapid determination of cerium(III) in rare earth mixtures and cerium concentrates.     

Proprietes solubilisantes et structure des solutions aqueuses de sels biliaires dihydroxyles

The solubilizing properties of aqueous solutions of isomeric salts, deoxycholate, chenodeoxycholate and ursodeoxycholate for naphthalene and cholesterol have been studied. For both molecules, ursodeoxycholate micelles have the poorest detergent power. Binding of naphthalene to micelles modifies the chemical shifts of the angular methyl groups of the bile salts as determined by ¹H NMR. A greater pertubation of the C₁₉ methyl signal relative to that of the C₁₈ methyl signal is observed with deoxycholate and chenodeoxycholate but not with ursodeoxycholate. These results suggest a distinct micellar structure for ursodeoxycholate.     

Dosage spectrophotometrique des ions cyanure libres par formation du complexe mixte bis(bathophenanthroline) dicyano Fer(II)

Cyanide ions react in aqueous medium with [Fe(bathophenanthroline)₃]²⁺ to form the mixed-ligand complex [Fe(bathophenanthroline)₂(CN)₂], which is strongly coloured and extractable into chloroform. This reaction can be used for detemination of cyanide with good sensitivity and precision. Potential interferences have been studied.     

The separation of berkelium(III) from cerium(III)

Factors affecting the separation of Bk(III) and Ce(III) in liquid-liquid extraction by tertiary and quaternary amines from neutral solutions of Li, Na, NH₄ and K nitrates have been investigated. It has been found that the maximum separation factor is reached in the extraction from NaNO₃ solutions by solutions of methyl-containing alkylammonium nitrates in xylene.     

Hydroxide complexes of cerium(III)

From the experimentally determined borderline of precipitation in the pM'-pH diagram the stability constants of the mononuclear and polynuclear species of cerium hydroxide have been determined graphically. The stability constants found are log*beta(1) = -8.1, log*beta(2) = -16.3, log*beta(3) = -26.0, log*beta(5,3) = -32.8 and log*K(s0) = 20.1. These values refer to freshly prepared precipitates, at room temperature and an ionic strength of 1, and are precise to about 0.2 log units.     

Etude calorimetrique de l'absorption de l'hydrogene sulfure dans des solutions aqueuses d'ethanolamines

Résumé La chaleur dégagée par l'absorption du sulfure d'hydrogène dans des solutions aqueuses de monoéthanolamine (MEA), diéthanolamine (DEA) et triéthanolamine (TEA) est mesurée directement par calorimétrie.Les valeurs des enthalpies obtenues sont comparées à celles obtenues par d'autres auteurs par calcul à partir des résultats d'expériences de solubilité ainsi qu'aux enthalpies de protonation par HC1 à 25.

---

Absorption heats of hydrogen sulphide in aqueous solutions of monoethanolamine, diethanolamine and triethanolamine were determined by calorimetry. The measured enthalpies were compared to those calculated on the basis of solubility measurement and to the enthalpies of protonation of hydrogen chloride at 25.

---

Zusammenfassung Die durch Absorption von Schwefelwasserstoff in wÄssrigen Lösungen von MonoÄthanolamin (MEA), DiÄthanolamin (DEA) und TriÄthanolamin (TEA) abgegebene WÄrme wurde unmittelbar durch Kalorimetrie gemessen. Die erhaltenen Enthalpiewerte wurden mit Versuchsergebnissen der Löslichkeit sowie der Protonierung durch HC1 bei 25 anderer Autoren verglichen.

---

-, - . 25.

     

Thermal decomposition of cerium(III) perchlorate

Thermal decomposition of Ce(ClO₄)₃ ? 9H₂O and Ce(ClO₄)₃ to give cerium(IV) dioxide in the temperature range 240–460°C was studied by DSC–TGA, X-ray powder diffraction, IR and mass spectroscopy. The thermolysis of these salts was shown to proceed through the stage of formation of intermediate product supposedly cerium oxoperchlorate. The thermal decomposition of cerium(III) perchlorate hydrate at 460°C leads to formation of nanocrystalline cerium dioxide with particle size of 13 nm.     

New cerium(III) and neodymium(III) complexes as cytotoxic agents

The cerium(III) and neodymium(III) complexes of 5‐aminoorotic acid were synthesized and characterized by means of spectral data (IR, Raman, ¹H NMR and ¹³C NMR) and elemental analysis. Significant differences in the IR spectra of the complexes were observed as compared with the spectrum of the ligand. A comparative analysis of the Raman spectra of the complexes with that of the free 5‐aminoorotic acid allowed a straightforward assignment of the vibrations of the ligand groups involved in coordination. ¹H NMR and ¹³C NMR spectra confirmed the formation of the complexes. The ligand and the complexes were tested for the cytotoxic activities on the chronic myeloid leukemia‐derived K‐562, overexpressing the BCR‐ABL fusion protein, and the non‐Hodgkin lymphoma‐derived DOHH‐2, characterized by a rexpression of the antiapoptotic protein bcl‐2 cell lines. The results obtained indicate that the tested compounds exerted a considerable cytotoxic activity upon the evaluated cell lines in a concentration‐dependent manner, which enabled the construction of dose–response curves and the calculation of the corresponding IC₅₀ values. Cytotoxicity towards tumor cells was determined for a broad concentration range. The inorganic salts exerted a very weak cytotoxic effect on these cells that is in contrast to the lanthanide complexes, which exhibited potent cytotoxic activity towards K‐562 and DOHH‐2 cell lines. Copyright © 2006 John Wiley & Sons, Ltd.     

Dimorphic cerium(III) oxoarsenate(III) Ce[AsO3]

Colourless, water- and air-stable single crystals of cerium(III) oxoarsenate(III) Ce[AsO₃] were prepared by the reaction of cerium metal (Ce) and arsenic sesquioxide (As₂O₃) in the presence of cesium chloride (CsCl) as fluxing agent at 750 °C in an evacuated silica ampoule. Ce[AsO₃] crystallizes monoclinically (a = 902.89(8), b = 782.54(7), c = 829.68(7) pm, β = 103.393(3)°, Z = 8) in the space group P2₁/c and is isotypic with α-Pb[SeO₃]. There are two crystallographically different Ce³⁺ positions. (Ce1)³⁺ is coordinated by nine oxygen atoms (d(Ce–O) = 244–286 pm) and (Ce2)³⁺ by only eight (d(Ce–O) = 239–273 pm). Both crystallographically different As³⁺ cations form discrete ψ¹ tetrahedra [AsO₃]³⁻ (d(As–O) = 174–179 pm), which are attached to the Ce³⁺ cations via edges and corners. The second monoclinic modification of Ce[AsO₃] with the lattice parameters a = 439.32(4), b = 529.21(5), c = 617.34(6) pm and β = 105.369(3)° with Z = 2 was obtained by high-pressure synthesis (11 GPa, 1200 °C) and has both a higher density (6.31 vs. 6.13 g · cm⁻³) and a higher calculated Madelung part of the lattice energy (15,155 vs. 15,132 kJ · mol⁻¹). It adopts the space group P2₁/m, crystallizing isotypically with La[AsO₃], β-Pb[SeO₃], Pb[SO₃] (scotlandite) or K[ClO₃] and exhibits nine-fold coordinated Ce³⁺ cations exclusively (d(Ce–O) = 254–287 pm) along with tripodal [AsO₃]³⁻ anions (d(As–O) = 175–176 pm). Raman spectroscopy on both phases of Ce[AsO₃] shows stretching vibrations between 769 and 731 cm⁻¹ as well as asymmetric vibrations in the range of 659–617 cm⁻¹. The symmetric bending mode vibrations emerge in an interval from 340 to 410 cm⁻¹ and the asymmetric bending modes range between 230 and 290 cm⁻¹.     

Binuclear dinitrogen complexe of aryl- and benzyldicyclopentadienyltitanium(III) compounds

The preparation of the deep-blue diamagnetic dinitrogen complexes (Cp₂TiR)₂N₂ with R=C₆H₅, o-, m-, p-CH₃C₆H₄, C₆F₅, CH₂C₆H₅ is described. Their chemical and physcial properties confirm the formulation in which the R groups are σ-bonded to the Cp₂Ti moiety, and the two nitrogen atoms are equivalent. The heats of formation of the complexes from Cp₂TiR and N₂ in toluene have been determined from spectrophotometric data; for R=C₆H₅, o-, m-, p-CH₃C₆H₄, C₆F₅, CH₂C₆H₅, the values are ?18, ?9, ?17, ?20, ?17 and ?14 kcal·mol^?1, respectively. The solid complexes vary markedly in thermal stability, and are extremely air sensitive. The complexed nitrogen can be completely reduced with sodium naphthalene; after hydrolysis of the products, NH₃ and N₂H₄ are obtained. In the thermolysis of the solids, some of the nitrogen is reduced.     

Simultaneous spectrofluorimetric determination of cerium(III) and cerium(IV) by flow injection analysis

Cerium(III) (1–100 μg l^?1) is determined by injection into a carrier stream of hydrochloric, perchloric or sulphuric acid, and monitoring its native fluorescence. Cerium(IV) can be determined similarly by incorporating a zinc reductor minicolumn into the system. Splitting the injection sample so that only part passes through the reductor, and the remainder by-passes it, allows total cerium and cerium(III) to be detected from the two sequential fluorescence peaks obtained.     

Determination of cerium(III) and cerium(IV) in nanodisperse ceria by chemical methods

Percentages of different valence cerium species have been determined in powdery samples, redispersible compositions, and aqueous sols of nanodisperse ceria prepared from cerium(IV) and cerium(III) salts by various methods with or without organic stabilizers. Cerium(III) is shown to be virtually absent in nearly all of the CeO₂ samples studied. Organic stabilizers are shown to be capable of reducing cerium(IV) in aqueous CeO₂ sols.     

Spectrofluorimetric determination of pharmaceutical compounds with the cerium(IV)—cerium(III) system

The compounds to be determined are oxidised by cerium(IV). The concentration of cerium(III) formed is measured spectrofluorimetrically. The method has been used both in solution and, by fluorodensitometry, on t.l.c. plates. Detection limits of some substances are 15 ng ml^-1 for the solution method and 5 ng per spot for the t.l.c. method.     

Effect of chlorides on cerium(III) and samarium(III) ionic flotation

The ionic flotation of cerium(III) and samarium(III) from nitrate solutions with sodium dodecylsulfate as a collector and sodium chloride addition was studied. Dependences of distribution coefficients and a separation factor on the aqueous phase pH at various concentrations of chloride ions were determined.     

Etude des enthalpies de dissolution A 298 K des fluorures alcalins dans les solutions aqueuses de HF

Enthalpies of solution of alkali fluorides in aqueous HF have been measured over a wide range of HF concentrations.