类脂囊泡包封药物顺铂的研究

用司盘(Span)系列非离子表面活性剂和胆固醇(CHOL)为主要膜材,通过薄膜-超声波法制备了顺铂囊泡,研究了影响包封率的主要因素,考察了顺铂囊泡在体外的释放性能.实验表明:在50℃超声50 m in的条件下,由Span20与CHOL(摩尔比为5∶3)制备的囊泡对0.60 g.L-1注射用顺铂包封率可达65%以上,且包封后的药物在模拟肠流体和模拟胃流体中均有缓释作用.     

非离子表面活性剂囊泡对头孢菌素药物的缓释作用

用超声法制备了Span系列非离子表面活性剂囊泡,研究了它们对几种水溶性头孢菌素药物的包封作用及影响包封率的因素,通过透射电镜对囊泡的形态和大小进行了鉴定.实验表明,制得的囊泡多为球形单室囊泡,且包封后的药物在模拟肠液和模拟胃液中均有缓释作用.     

类脂囊泡作为5-氟尿嘧啶药物载体的研究

采用薄膜分散法,以司盘类非离子表面活性剂和胆固醇为主要原料,制备抗肿瘤药物5-氟尿嘧啶(5-FU)类脂囊泡.以包封率为考察指标,对可能影响包封的各种实验条件进行优化.实验表明:药物浓度为1.0 g/L,Span 20与胆固醇比例为4∶3,50℃超声30min,所制得的5-FU类脂囊泡的包封率可达40%以上.透射电镜照片显示所制得的类脂囊泡为球形单室结构,测得平均粒径为393nm,且分布较均匀,表明制得的囊泡粒径符合注射给药的要求.     

失水山梨醇脂肪酸酯-聚乙二醇嫁接的聚乙烯醇化磁性药物载体的制备及应用

通过丁二酸酐将失水山梨醇脂肪酸酯(Span80)和聚乙二醇(PEG400)联接在一起,合成了一种新的非离子表面活性剂.然后将其嫁接在聚乙烯醇(PVA)化的Fe3O4磁性粒子上,合成了一种新型靶向药物载体.这种载体兼备了Span80/PEG400类脂囊泡和磁性材料的特点,具有良好的稳定性和靶向作用.将这种新型载体用于两性霉素的包封,包封率可达96.6%,且方法简便.实验过程中采用了FTIR, NMR, XRD和TEM等多种手段进行表征.     

非离子表面活性剂囊泡包封药物头孢唑啉钠的研究

实验通过超声波法制备了吐温类非离子表面活性剂囊泡，研究了它们对药物质奖励不孢唑啉钠（CEZ）的包封作用以及被包封的CEZ在模拟胃液及模拟肠液中的释放情况。实验表明，吐温40与胆固醇体积比为1：1时形成的非离子表面活性剂囊泡对1mg/mL的CEZ的包封率是20％，而且在模拟胃液和模拟肠液中，对包封的药物都有一定的缓释作用，因此有可能作为临床上的药物缓释剂。     

离子键交联聚合物囊泡的制备及对药物的负载与释放

通过双亲性接枝共聚物海藻酸钠接枝聚N-异丙基丙烯酰胺(SA-g-PNIPAM)与Ca2+之间的静电作用,在水溶液中制备了温度敏感性离子键交联聚合物囊泡,并以5-氟尿嘧啶(5-FU)为模型药物,研究了聚合物囊泡对5-FU的负载与释放性能。该囊泡疏水性的膜由海藻酸钠与Ca2+之间的静电作用复合形成。透射电镜研究表明,囊泡具有空心结构,直径在100~150nm左右。聚合物囊泡的最低临界溶解温度(LCST)为34.5℃左右。聚合物囊泡对5-FU具有较高的载药量和包封率,其药物释放速率随溶液p H值的增加而降低,随离子强度的增大而增大,表现出良好的环境响应性。     

赖氨酸在甘草次酸弹性囊泡形成过程中的作用机制

制备和评价含赖氨酸的甘草次酸弹性囊泡, 并考察赖氨酸在囊泡形成过程中的作用机制. 在水合介质中加入赖氨酸, 利用薄膜-高压均质法制备甘草次酸弹性囊泡. 并合成了甘草次酸赖氨酸盐及其弹性囊泡作为对比制剂. 通过对粒径、zeta电位、包封率、相转变温度、变形性和体外经皮渗透性的测试, 考察赖氨酸在甘草次酸弹性囊泡中的存在形式及作用. 结果显示加入赖氨酸后, 甘草次酸弹性囊泡的粒径略有降低, 膜相转变温度降低, 包封率和囊泡变形性显著提高, 载药量提高近30倍(1.5 mg·mL-1), 并显著高于其赖氨酸盐所形成囊泡的载药量和弹性. 此外, 赖氨酸的加入使弹性囊泡的变形能力增加, 8 h累积透过量和皮肤驻留量分别提高4.3倍和9.2倍. 表明赖氨酸与甘草次酸形成离子缔合物, 促进甘草次酸参与膜的形成, 使膜的流动性增加, 赖氨酸与弹性囊泡对提高囊泡载药量起协同作用.     

血红蛋白在Span 80/PEG 400/H2O囊泡体系中的结构性质

通过紫外-可见吸收光谱、荧光光谱、动态光散射、圆二色谱、负染-透射电镜(NS-TEM)和冷冻蚀刻-透射电镜(FE-TEM)等实验方法研究了血红蛋白(Hb)与Span 80/PEG 400/H₂O囊泡间的相互作用及其结构特性. 结果表明: Hb易于吸附在囊泡表面, 使得囊泡的表观半径稍有增大; Hb的肽链在囊泡表面能够逐渐伸开, 特征荧光峰强度显著增强, 部分氨基酸残基进一步暴露, α-螺旋结构含量减少, β-折叠和β-转角结构含量增加, 无规卷曲结构含量基本不变. 囊泡体系中Hb的稳定性与囊泡的稳定性有关.     

超临界CO2法制备头孢唑啉钠脂质体

采用超临界CO2(scCO2)流体代替有机溶剂一步法制备了头孢唑啉钠药物载体脂质体. 研究了该脂质体的尺寸、稳定性和药物的包封率. 结果表明, 脂质体的尺寸和稳定性依赖于制备压力, 脂质体对头孢唑啉钠的包封率与乙醇和脂浓度有关, 采用超临界CO2法制备脂质体的药物包封率比采用薄膜分散法(Bangham method)制备的包封率高.     

共轭亚油酸与海藻酸钠囊泡化自组装纳米容器及其药物缓释性能

脂肪酸囊泡(FAV)是一类重要的纳米容器,然而其形成pH范围较窄且偏碱性环境,限制了其应用。 本文将共轭亚油酸(CLA)与海藻酸钠(SA)在近中性环境下共同自组装囊泡化纳米容器并提高其膜稳定性。动态激光光散射(DLS)和透射电子显微镜(TEM)结果表明,当SA质量分数为25%~50%时复合体系可在近中性条件下自组装形成50~250 nm尺寸的囊泡化纳米容器,且pH=7.4时随着质量分数增加囊泡化纳米容器直径增大。 根据SA和CLA在中性环境的物种存在形式推测,二者通过氢键作用驱动形成囊泡化纳米容器。 体外模拟释放实验表明,囊泡化纳米容器具有较高包覆率和较优缓释效果,有望应用于药物传输领域。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.