Hydrophobic Interactions of Methylureas in Aqueous Solutions Estimated with Density, Molal Volume, Viscosity and Surface Tension from 293.15 to 303.15 K

Density (ρ), viscosity (η), and surface tension (γ) for 0.005–0.25 mol ⋅ kg⁻¹ solutions of urea, 1-methylurea, and 1,3-dimethylurea solutions have been measured at intervals of 0.005 mol ⋅ kg⁻¹. Apparent molal volume (V _o, cm³ ⋅ mol⁻¹) and intrinsic viscosity coefficients (B and D) are calculated from the ρ and η values, respectively. Primary data were regressed and extrapolated to zero concentration for the limiting density (ρ ⁰), apparent molal volume (V _φ ⁰), viscosity (η ⁰), and surface tension (γ ⁰) values for solute–solvent interactions. The –CH₃ (methyl) groups of N-methylureas weaken hydrophilic interactions and enhance hydrophobic interactions, and the values of the ρ ⁰ and V _φ ^o reflect the intermolecular forces due to electrostatic charge, whereas the η ⁰ and γ ⁰ values reflect the frictional and surface forces. The B values depict the size of hydrodynamic sphere due to heteromolecular forces whereas D shows the effect of concentration. The molar surface energy (ΔE _m/sur) for dropwise flow was calculated from the γ values and decreases with concentration and temperature, but increases with –CH₃ weakening of the hydrophilic interactions and strengthening the hydrophobic interactions.     

The Physical Properties of Aqueous Solutions of the Ionic Liquid [BMIM][BF4]

We report here the systematic study of the effect of concentration on the physical properties of aqueous solutions of the room-temperature ionic liquid [BMIM][BF₄]. The measurements of density, ρ, refractive index △n, viscosity η, specific conductivity κ and surface tension, γ, were made over the whole concentration range. The equivalent conductance Λ _m was calculated. The observed linear variations of density and refractive index with the molar concentration are established as those of an ideal solution. The surface tension varied most rapidly in the dilute region whereas the viscosity changed much more rapidly in the concentrated region. Two regions with different composition dependences were found after the analyses of the relationship between the conductivity and the concentration of [BMIM][BF₄]. A proposed model for a structural change in the mixtures was described. The physical origin of the observed concentration dependence of these properties is discussed. The physical properties of the solutions vary with changes of association between anions and cations and the interaction between [BMIM][BF₄] and water.     

Equilibrium dielectric properties of butanediols

Experimental investigations of static dielectric permittivity (ɛ _s ) for 1,3-, 1,4-, and 2,3-butanedilos determined in the temperature range from 283 to 423 K at 1 MHz and a density of (ρ) are presented. The values of the experimental correlation factor, g _exp, which characterizes the correlation of the orientation of molecules in a liquid due to short-range oriented intermolecular interactions, are calculated according to the Onsager-Kirkwood-Frohlich theory. Its values are used for the judgment of a character of a short-range orientation order in a liquid.     

Volumetric profile of polymer melts from the ISM equation of state

Knowledge of the volumetric or pressure–volume–temperature (PVT) profile of molten polymers is important for both engineering and polymer physics. Ihm–Song–Mason (ISM) equation of state (EOS) has been employed to predict the volumetric properties of 12 molten polymers. The significance of the present paper is three temperature-dependent parameters of the ISM EOS to be determined using corresponding states correlations based on the molecular scaling constants, dispersive energy parameters between segments/monomers (ε) and segment diameter (σ) rather than bulk properties, e.g. the liquid density and temperature both at normal boiling point. The ability of the ISM EOS has been evaluated by comparing the results with 1390 literature datapoints for the specific volumes over the temperature range from 293 to 603.5 K and pressure range from 0.1 to 200 MPa. The average absolute deviation (AAD) of the calculated specific volumes from literature data was found to be 0.52%. The isothermal compressibility coefficients, κ_T values of molten polymers have also been predicted using the ISM EOS. From 684 datapoints examined, the AAD of estimated κ_T was equal to 7.55%. Our calculations on the volumetric and thermodynamic properties of studied polymers reproduce the literature data with reasonably good accuracy.     

Competition of Viscosity Correlation Equations in Isobutyric Acid + Water Binary Mixtures Near and Far Away from the Critical Temperature

Shear viscosity deviations Δη have been investigated by using density (ρ) and kinematic viscosity (ν) measurements for isobutyric acid + water (IBA + W) mixtures over the entire range of mole fractions at atmospheric pressure and at two temperatures (301.15 and 315.15 K). This study extends the temperature range from the five other temperatures investigated in a previous work, 1.055 K≤(T−T _c )≤14.055 K, both far from and close to the critical temperature. This system exhibits very large positive values of Δη due to increased hydrogen bonding interactions and the correlation length between unlike molecules in the critical region, and to very large differences between the molar volumes of the pure components at low temperatures. The results were also fitted with the Redlich–Kister polynomial equations and the recently proposed Herráez correlation equation. Comparisons between the two models at different temperatures and number of parameters are discussed. We note that, in this system where the shear viscosity η as a function of mole fraction (x ₁) of IBA presents a maximum, experimental data are in agreement with the two correlation models when more than three parameters are employed, especially for temperatures far from the critical temperature.     

Ultrasonic Velocities,Densities, and Refractive Indices of Binary Mixtures of Polyethylene Glycol 250 Dimethyl Ether with 1-Propanol and with 1-Butanol

Measurements of the ultrasonic velocity (u), density (ρ) and refractive index (n) for binary mixtures of polyethylene glycol 250 dimethyl ether with 1-propanol and 1-butanol have been made at three temperatures (T=293, 303 and 31 K) over the entire composition range in order to investigate the nature of intermolecular interactions between the components of these liquid mixtures. Various excess thermodynamic properties such as the excess ultrasonic velocity (Δu), deviation in isentropic compressibility (Δk _S ), excess intermolecular free length (L_f^E)(L_{\mathrm{f}}^{\mathrm{E}}), excess acoustic impedance (Z ^E), excess pseudo-Grüneisen parameter (Γ ^E), and molar refraction deviation (ΔR _m) were calculated using experimental values of the ultrasonic velocity, density and refractive index and were then represented with the Redlich-Kister polynomial equation. The observed excess deviation parameter values were explained on the basis of the strength of intermolecular interactions between the components of the mixtures. Estimations of the refractive index and ultrasonic velocity have also been made using various empirical relations and are discussed in terms of the average percentage deviations (APD).     

Study of apparent molal volume and viscosity of mutual citric acid and disodium hydrogen orthophosphate aqueous systems

Fundamental properties, density (ρ) and viscosity (η), of citric acid (CA) and disodium hydrogen orthophosphate (DSP) at various strengths were obtained at different temperatures. The ρ and η values were used to determine apparent molal volumes and viscosity of systems. The ρ, V_Φ and η values were regressed against molalitym for ρ⁰, η⁰ and V _Φ ⁰ , the limiting constants at infinite dilution (m → 0) for ionic and molecular interactions. The ρ⁰ and V _Φ ⁰ of aq. acids are higher than those of aq. DSP and the viscosity of DSP is higher than that of aq. CA. Examination of ρ⁰ and V _Φ ⁰ functions indicates that mutual compositions of CA and DSP counterbalance concentration and temperature effects on pH in bioprocesses.     

Study of capacitive properties in supercapacitor for copolymer of aniline with m-phenylenediamine

The copolymers were synthesized with different molar ratios of m-phenylenediamine to aniline (R for short) by a chemical oxidation method. The products were first used as electrochemical activity materials of the supercapacitor. Capacitive behaviors of the prepared copolymers in 1 mol·L⁻¹ H₂SO₄ electrolyte were examined by electrochemical impedance spectroscopy, cyclic voltammeter, and galvanostatic charge/discharge. The relationship of molar ratios with capacitive property of the prepared products was investigated too. The results showed that the product with R of 2:98 displayed better electrochemical properties than that of the other products. Compared with the synthesized polymer in the absence of m-phenylenediamine, the polymerized copolymer with R of 2:98 exhibited the initial specific capacitance value of 475 F·g⁻¹, which increased by nearly 10.1% than that of the former at a current density of 200 mA·g⁻¹ in 1 mol·L⁻¹ H₂SO₄ electrolyte in the potential range of −0.3 to 0.7 V. The discharge specific capacitance value of the copolymer remained 300 F·g⁻¹ after 1,000 cycles, exhibiting a good cycling performance and the structure stability.     

Shear induced aggregation of a pectin stabilised emulsion in two dimensions

Shear induced aggregation of a Pectin stabilised emulsion trapped at the air-liquid interface was studied in a Couette system by video enhanced microscopy. From dimension analysis, Brownian motion was identified to enhance the probability of bond formation. The characteristic time scale of aggregation was found to scale as t_c ∼ η/φ rather than t_c ∼ 1/γ˙φ as expected for orthokinetic aggregation. The structure of very large clusters showed strongly rearranged strands and fractal scaling for low γ˙ and φ, analysed by density auto-correlation. At high γ˙ and φ, the cluster was dominated by larger drops and no fractal scaling could be determined for the accessible length scales. Received: 7 June 2000 Accepted: 1 August 2000     

Volumetric and Ultrasonic Investigation of Glycylglycine in Aqueous FeCl<Subscript>3</Subscript> Solutions

Viscosity, ultrasonic velocity and density measurements have been carried out for glycylglycine in aqueous FeCl₃ solution as a function of molality at T=288.15 K, 298.15 K and 308.15 K. The experimental data have been used to derive properties such as isentropic compressibility (κ _S ), change in isentropic compressibility (Δκ _S ), relative change in isentropic compressibility (Δκ _S /κ ₀), apparent molar compressibility, volume and their limiting apparent molar quantities along with the constants S _K , S _V and viscosity B-coefficient. The obtained thermodynamic properties have been discussed in terms of molecular interactions.     

Thermodynamics of binary liquid mixtures of cyclopentane with 2-propanol, 1-butanol and 2-butanol at different temperatures

Densities and speeds of sound of the cyclopentane with 2-propanol, 1-butanol and 2-butanol are measured over the whole composition range at different temperatures in the range 288.15–308.15 K and atmospheric pressure using Anton Paar DSA 5000 densimeter. The experimental densities and speeds of sound have been used to calculate excess molar volumes, excess molar isentropic compressibilities and excess intermolecular free length. The partial molar volumes and apparent molar volumes at infinite dilution have also been calculated. The mixing quantities like (∂V _m^E/∂T)_P and (∂H _m^E/∂P)_T have been calculated at T = 298.15 K and these values are compared with the values calculated from Flory’s theory at equimolar composition.     

A detailed analysis of the properties of radiolyzed proteinaceous amino acids

The thermal behaviour of 21 proteinaceous l-amino acids either as pristine samples and also as radiolyzed (3.2 MGy) samples was studied with the differential scanning calorimeter. The onset and peak melting point as well as the melting enthalpy of all samples before and after the radiation treatment was measured and reported. The residual amount of each amino acid survived to the radiation dose of 3.2 MGy (N _γ) was measured from the melting enthalpies before and after radiolysis and hence the radiation resistance of each amino acid has been determined. The radiolysis causes a systematic reduction of the melting enthalpy and a shift of the onset and peak melting point to lower values. It is shown that N _γ does not correlate with the melting points of the amino acids but shows a correlation with the entity of the shift of the melting point peaks occurred after radiolysis. Such correlation instead does not exist between the N _γ parameter and the onset melting points of the amino acids. An explanation of such lack of correlation was given. Furthermore, a general relationship has been found between the amino acids melting point peak measured on pristine samples and the melting point peaks after solid state radiolysis. Such relationship can be used to predict roughly the expected melting point after radiolysis at 3.2 MGy of any given amino acid. The last part of the study was dedicated in the attempt to find a correlation between the N _γ parameter and the amount of the amino acids survived the radiolysis R _γ as measured by spectropolarimetry (ORD spectroscopy). A general trend was found in the connection between the N _γ and R _γ parameters but not a very strong correlation.     

Behavior of ethylene and ethane within single-walled carbon nanotubes, 2: dynamical properties

The dynamical behavior of ethylene and ethane confined inside single-walled carbon nanotubes has been studied using Molecular Dynamics and a fully atomistic force field. Simulations were conducted at 300 K in a broad range of molecular densities, 0.026 mol⋅L⁻¹<ρ<15.751 mol⋅L⁻¹(C₂H₄) and 0.011 mol⋅L⁻¹<ρ<14.055 mol⋅L⁻¹(C₂H₆), and were oriented towards the determination of bulk and confined phase self-diffusion coefficients. In the infinite time limit, Fickian self-diffusion is the dominant mode of transport for the bulk fluids. Upon confinement, there is a density threshold (ρ=5.5 mol⋅L⁻¹) below which we observe a mixed mode of transport, with contributions from Fickian and ballistic diffusion. Nanotube topology seems to have only a small influence on the confined fluids’ dynamical properties; instead density (loading capacity) assumes the dominant role. In all cases studied and at a given density, the diffusivities of ethylene are larger than those of ethane, although the difference is relatively minor. We note the collapse of self-diffusivities obtained from the bulk fluids and confined phases into a unique single trend. These results suggest that it might be possible to infer dynamical properties of confined fluids from the knowledge of their bulk phase densities. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Excess Molar Volume and Viscosity of Isobutyric Acid + Water Binary Mixtures Near and Far Away from the Critical Temperature

The excess molar volume V^E, shear viscosity deviation Δη and excess Gibbs energy of activation ΔG^∗E of viscous flow have been investigated by using density (ρ) and shear viscosity (η) measurements for isobutyric acid + water (IBA+W) mixtures over the entire range of mole fractions at five different temperatures, both near and close to the critical temperature (2.055K ≤ (T−T_c)≤ 13.055K). The results were also fitted with the Redlich–Kister equation. This system exhibited very large negative values of V^E and very large positive values of Δη due to increased hydrogen bonding interactions and correlation length between unlike molecules in the critical region and to very large differences between the molar volumes of the pure components at low temperatures. The activation parameters ΔH^∗ and ΔS^∗ have been also calculated and show that the critical region has an important effect on the volumetric properties.     

Synthesis and characterization of mesoporous Mn–Ni oxides for supercapacitors

Mesoporous Mn–Ni oxides with the chemical compositions of Mn_1-x Ni _x O _δ (x = 0, 0.2, and 0.4) were prepared by a solid-state reaction route, using manganese sulfate, nickel chloride, and potassium hydroxide as starting materials. The obtained Mn–Ni oxides, mainly consisting of the phases of α- and γ-MnO₂, presented irregular mesoporous agglomerates built from ultra-fine particles. Specific surface area of Mn_1–x Ni _x O _δ was 42.8, 59.6, and 84.5 m² g⁻¹ for x = 0, 0.2, and 0.4, respectively. Electrochemical properties were investigated by cyclic voltammetry and galvanostatic charge/discharge in 6 mol L⁻¹ KOH electrolyte. Specific capacitances of Mn_1-x Ni _x O _δ were 343, 528, and 411 F g⁻¹ at a scan rate of 2 mV s⁻¹ for x = 0, 0.2, and 0.4, respectively, and decreased to 157, 183, and 130 F g⁻¹ with increasing scan rate to 100 mV s⁻¹, respectively. After 500 cycles at a current density of 1.24 A g⁻¹, the symmetrical Mn_1–x Ni _x O _δ capacitors delivered specific capacitances of 160, 250, and 132 F g⁻¹ for x = 0, 0.2, and 0.4, respectively, retaining about 82%, 89%, and 75% of their respective initial capacitances. The Mn_0.8Ni_0.2O _δ material showed better supercapacitive performance, which was promising for supercapacitor applications.     

Equation of state for molten alkali metal alloys

Results on the density of binary and ternary alkali metal alloys of Cs–K, Na–K, Na–K–Cs, at temperatures from the freezing point up to several hundred degrees above the boiling point are presented. The theoretical equation of state is that of Ihm, Song, and Mason. The second virial coefficients, B(T), are calculated by using the corresponding states correlation of Boushehri and Mason. Calculation of the other two temperature-dependent parameters, α(T) and b(T), are performed by scaling rules with the latent heat of vaporization and the freezing point density as scaling constants. The results are within 5%.     

Glycine-assisted hydrothermal synthesis of nanostructured Co x Ni1−x –Al layered triple hydroxides as electrode materials for high-performance supercapacitors

Nanostructured Co _x Ni_1−x –Al layered triple hydroxides (Co _x Ni_1−x –Al LTHs) have been successfully synthesized by a facile hydrothermal method using glycine as chelating agent. The samples were characterized by X-ray diffraction, thermogravimetry, Fourier transform infrared spectroscopy and scanning electron microscopy. The morphologies of Co _x Ni_1−x –Al LTHs varied with the Co content and its effect on the electrochemical behavior was studied by cyclic voltammetry and galvanostatic charge–discharge techniques. Electrochemical data demonstrated that the Co _x Ni_1−x –Al LTHs with Co/Ni molar ratio of 3:2 owned the best performance and delivered a maximum specific capacitance of 1,375 F g⁻¹ at a current density of 0.5 A g⁻¹ and a good high-rate capability. The capacitance retained 93.3% of the initial value after 1,000 continuous charge–discharge cycles at a current density of 2 A g⁻¹.     

Interaction between cetyltrimethylammonium bromide and β-cyclodextrin: surface tension and interfacial dilational viscoelasticity studies

The interaction between cetyltrimethylammonium bromide (CTAB) and β-cyclodextrin (β-CD) was studied via surface tension and dilational viscoelasticity methods. The effect of sodium bromide and sodium chloride on the interaction between CTAB and β-CD were studied as well. The surface tension isotherms provided a series of parameters, including apparent critical micelle concentration (cmc*), surface tension at the cmc* (γ_cmc), stoichiometry of the complex (R), and the efficiency of adsorption (pC ₂₀ ). The addition of NaBr and NaCl decreases the cmc* of CTAB/β-CD solution. CTAB molecules enter the cavities of β-CD molecules thus formed both 1:1 and 1:2 inclusion complexes. From the change of γ_cmc, it can be seen that the CTAB/β-CD complexes (1:1) act as short-chain alcohol, which decrease γ_cmc, but the depression of cmc* is too small to be detected. R first decreases then increases as a function of NaBr and NaCl. Compared to NaCl, NaBr increases R more efficiently. The presence of NaBr and NaCl increases pC ₂₀ of CTAB/β-CD solution. The results obtained from the dilational viscoelasticity measurements at low dilational frequencies (0.005–0.1 Hz) reveal that the dilational modulus passes through a maxium value with increasing concentration of β-CD at a given concentration of CTAB. The addition of both NaBr and NaCl decreases the dilational modulus of a given concentration CTAB/β-CD solution. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Thermodynamic and transport properties for binary and ternary mixtures of 2-methyltetrahydrofuran?+?chlorobenzene?+?cyclopentanone at T?=?298.15?K

Abstract  

Experimental densities ρ, viscosities η, and refractive indices n _D of the ternary mixtures consisting of 2-methyltetrahydrofuran + chlorobenzene + cyclopentanone and constituted binary mixtures were measured at T = 298.15 K for the liquid region and at ambient pressure for the whole composition range. Excess molar volumes V_\textm^\textEV_{\text{m}}^{\text{E}}, deviations in the viscosity Δη, and deviations in the refractive index Δn _D from the mole fraction average for the mixtures were derived from the experimental data. The excess partial molar volumes V_\textm,i^\textEV_{{\text{m}},i}^{\text{E}} were also calculated. The binary and ternary data of V_\textm^\textEV_{\text{m}}^{\text{E}}, Δη, and Δn _D were correlated as a function of the mole fraction by using the Redlich–Kister and the Cibulka equations, respectively. McAllister’s three-body interaction model is used for correlating the kinematic viscosity of binary mixtures with the mole fraction.