Investigation of the formation of nickel and cobalt nanoparticles upon thermal decomposition of Ni,Al-and Co,Al-layered double hydroxides pillared with complexes [Ni(edta)]<Superscript>2−</Superscript> and [Co(edta)]<Superscript>2−</Superscript>

Double layered hydroxides [M_0.7Al(OH)_3.6] [M(edta)]_0.4·nH₂O (M,Al-M(edta), M = Ni, Co) containing nickel or cobalt edta complexes in the interlayer space were obtained for the first time. Vacuum thermal decomposition of these compounds results in the formation of metal nanoparticles dispersed in an amorphous matrix. Thermal decomposition products were studied by powder X-ray diffraction and ferromagnetic resonance technique. The scheme of structural rearrangements occurring during heating was derived from the data obtained. According to this scheme, below 200°C the interlayer and absorbed water escapes, and at 200–325°C metal-hydroxide layers undergo dehydration. At higher temperatures organic fragment of the complex suffers destruction to yield metal. It is shown that thermal decomposition of Ni, Al-Ni(edta) at 325–340°C gives isotropic nickel nanoparticles, while at higher temperatures the metal consists of a mixture of isotropic and anisotropic particles. Isotropic particles of β-Co formed at 350°C and above are of size 3–4 nm, no anisotropic particles being observed.     

In Situ Confined Growth Based on a Self‐Templating Reduction Strategy of Highly Dispersed Ni Nanoparticles in Hierarchical Yolk–Shell Fe@SiO2 Structures as Efficient Catalysts

Ni‐based magnetic catalysts exhibit moderate activity, low cost, and magnetic reusability in hydrogenation reactions. However, Ni nanoparticles anchored on magnetic supports commonly suffer from undesirable agglomeration during catalytic reactions due to the relatively weak affinity of the magnetic support for the Ni nanoparticles. A hierarchical yolk–shell Fe@SiO₂/Ni catalyst, with an inner movable Fe core and an ultrathin SiO₂/Ni shell composed of nanosheets, was synthesized in a self‐templating reduction strategy with a hierarchical yolk–shell Fe₃O₄@nickel silicate nanocomposite as the precursor. The spatial confinement of highly dispersed Ni nanoparticles with a mean size of 4 nm within ultrathin SiO₂ nanosheets with a thickness of 2.6 nm not only prevented their agglomeration during catalytic transformations but also exposed the abundant active Ni sites to reactants. Moreover, the large inner cavities and interlayer spaces between the assembled ultrathin SiO₂/Ni nanosheets provided suitable mesoporous channels for diffusion of the reactants towards the active sites. As expected, the Fe@SiO₂/Ni catalyst displayed high activity, high stability, and magnetic recoverability for the reduction of nitroaromatic compounds. In particular, the Ni‐based catalyst in the conversion of 4‐nitroamine maintained a rate of over 98 % and preserved the initial yolk–shell structure without any obvious aggregation of Ni nanoparticles after ten catalytic cycles, which confirmed the high structural stability of the Ni‐based catalyst.     

Simple preparation of a cadmium selenide-montmorillonite hybrid

The immobilization of organically modified cadmium selenide on montmorillonite was investigated by the reaction of modified cadmium selenide nanoparticles with montmorillonite. The intercalation of the nanoparticles was indicated by the expansion of the interlayer space and spectroscopic observations. The diffuse reflectance absorption spectrum of the product showed absorption onset at 567 nm. In comparison to the bulk cadmium selenide, the blue shift of the absorption onset of the hybrid was ascribed to the quantum size effect of the modified cadmium selenide nanoparticles. This study provides a new method for introducing nanoparticles into the interlayer space of layered inorganic materials.     

Synthesis of ZnO nanoparticles on a clay mineral surface in dimethyl sulfoxide medium

Nanocrystalline ZnO particles have been prepared with different methods using zinc cyclohexanebutyrate as precursor in dimethyl sulfoxide (DMSO) medium via alkaline hydrolysis. A series of preparations were carried out in the presence of layered silicates (kaolinite and montmorillonite). It was revealed by different measurement techniques that the presence of the clay minerals has a stabilization influence on the size of the ZnO nanocrystals. UV-vis absorption spectra show a blue shift when the nanoparticles are prepared in the presence of the clay minerals. The average particle diameters calculated from the Brus equation ranged from 2.6 to 13.0 nm. The UV-vis spectra of the synthesized nanoparticles did not show any red shift after 2-3 days, demonstrating that stable ZnO nanocrystals are present in the dispersions. The presence of the ZnO nanoparticles was also proven by fluorescence measurements. A number of the nanoparticles are incorporated into the interlamellar space of the clays, and an intercalated structure is formed as proven by X-ray diffraction (XRD) measurements. The size of the nanoparticles in the interlamellar space is in the range of 1-2 nm according to the XRD patterns. Transmission electron microscopy and high-resolution transmission electron microscopy investigations were applied to determine directly the particle size and the size distribution of the nanoparticles.     

Fabrication of Ni nanoparticles by selective oxidation of permalloy thin film during imidization of polyamic acid

Ni nanoparticles embedded in a polyimide (PI) matrix were fabricated by selectively oxidizing a layer of Ni(80)Fe(20) metal film sandwiched between two PI precursor layers. Ni nanoparticles, formed in a monolayer between two PI layers, had an average particle size of approximately 5 nm. X-Ray photoelectron spectroscopy confirmed that Fe in the film was preferentially consumed, resulting in the formation of Ni nanoparticles.     

Highly improved electrocatalytic oxidation of dimethylamine borane on silver nanoparticles modified polymer composite electrode

Dimethylamine borane (DMAB) is a promising fuel alternative for fuel cell applications. In this work cyclic voltammetric behavior of DMAB was investigated on the polymerized aminophenol film decorated with Ag nanoparticles in alkaline media. The polymer film was formed on the glassy carbon electrode by electrochemical technique and then, the surface was modified with Ag nanoparticles. The surface of the modified electrode was identified by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy techniques. The developed electrode has displayed high electrocatalytic activity for DMAB oxidation in alkaline media depending on the supporting electrolyte concentration. Experimental parameters such as cycle number used in electropolymerization of p-aminophenol, deposition of Ag nanoparticles and supporting electrolyte were optimized.     

Magnetic properties of monodispersed Ni/NiO core-shell nanoparticles

We have recently developed a method to fabricate monodispersed Ni/NiO core-shell nanoparticles by pulsed laser ablation. In this report, the size-dependent magnetic properties of monodispersed Ni/NiO core-shell nanoparticles were investigated. These nanoparticles were formed in two steps. The first was to fabricate a series of monodispersed Ni nanoparticles of 5 to 20 nm in diameter using a combination of laser ablation and size classification by a low-pressure differential mobility analyzer (DMA). The second step was to oxidize the surfaces of the Ni particles in situ to form core-shell structures. A superconducting quantum interference device (SQUID) magnetometer was used to measure the magnetic properties of nanostructured films prepared by depositing the nanoparticles at room temperature. Ferromagnetism was observed in the magnetic hysteresis loop of the nanostructured films composed of core-shell nanoparticles with core diameters smaller than the superparamagnetic limit, which suggests the spin of Ni core was weakly exchange coupled with antiferromagnetic NiO shell. In contrast, smaller nanoparticles with core diameters of 3.0 nm exhibited superparamagnetism. The drastic change in the hysteresis loops between field-deposited and zero-field-deposited samples was attributable to the strong anisotropy that developed during the magnetic-field-assisted nanostructuring process.     

Catalytic functions of Mo/Ni/MgO in the synthesis of thin carbon nanotubes

The functions and structures of Mo/Ni/MgO catalysts in the synthesis of carbon nanotubes (CNTs) have been investigated by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. Thin 2-5-walled CNTs with high purities (over 90%) have been successfully synthesized by catalytic decomposition of CH(4) over Mo/Ni/MgO catalysts at 1073 K. It has been found that the yield of CNTs as well as the outer diameter or thickness correlates well with the contents of these three elements. The three components Mo, Ni, and MgO are all necessary to synthesize the thin CNTs at high yields since no catalytic activity was observed for CNT synthesis when one of these components was not present. The outer diameter of the CNTs increases from 4 to 13 nm and the thickness of graphene layers also increases with increasing Mo content at a fixed Ni content, while the inner diameter stays at 2-3 nm regardless of their contents. Furthermore, the average outer diameter is in good agreement with the average particle size of metal catalyst. That is, the thickness or the outer diameter can be controlled by selecting the composition of the Mo/Ni/MgO catalysts. XRD analyses have shown that Mo and Ni form a Mo-Ni alloy before CNT synthesis, while the Mo-Ni alloy phase is separated into Mo carbide and Ni. These alloy particles are supported on MgO cubic particles 15-20 nm in width. It has been found that only small Mo-Ni alloy particles 2-16 nm in size catalyze CNT synthesis, with larger particles over 15 nm exhibiting no activity. Mo carbide and Ni should play different roles in the synthesis of the thin CNTs, in which Ni is responsible for the dissociation of CH(4) into carbon and Mo(2)C works as a carbon reservoir.     

Plasma-induced cathodic discharge electrolysis to form various metal/alloy nanoparticles

Nanoparticles of various elements such as Si, Al, and Zr were formed by plasma-induced cathodic discharge electrolysis in molten chloride electrolyte under a 1 atm Ar atmosphere. Al and Si nanoparticles with 100 nm diameters were obtained from an LiCl-KCl-CsCl melt at 300°C. Zr nanoparticles with diameters less than 50 nm were obtained from an LiCl-KCl at 450°C. Then with a newly designed and constructed “rotating disk anode type electrolytic cell”, Ti nanoparticles with diameters less than 20 nm were obtained. Finally, to find more appropriate condition for obtaining finer and more uniform nanoparticles, the effects of the pulse conditions of the applied current and the rotating velocity of a disk anode on size and morphology among the obtained nanoparticles were investigated by choosing Ni nanoparticle formation as an example. The results showed that quick removal of the formed fine nanoparticles from the melt surface, where the discharge column is standing, is the most important factor to obtain smaller and more uniform nanoparticles.     

Tailoring the carbon nanostructures grown on the surface of Ni-Al bimetallic nanoparticles in the gas phase

A gas-phase, one-step method for producing various aerosol carbon nanostructures is described. The carbon nanostructures can be selectively tailored with either straight, coiled, or sea urchin-like structures by controlling the size of Ni-Al bimetallic nanoparticles and the reaction temperature. The carbon nanostructures were grown using both conventional spray pyrolysis and thermal chemical vapor deposition. Bimetallic nanoparticles with catalytic Ni (guest) and non-catalytic Al (host) matrix were reacted with acetylene and hydrogen gases. At the processing temperature range of 650-800 °C, high concentration straight carbon nanotubes (S-CNTs) with a small amount of coiled carbon nanotubes (C-CNTs) can be grown on the surface of seeded bimetallic nanoparticle size <100 nm, resulting from consumption of the melting Al matrix sites; sea urchin-like carbon nanotubes (SU-CNTs) of small diameter (～10±4 nm) can be grown on the bimetallic nanoparticle size >100 nm, resulting from the significant size reduction of the available Ni sites due to thermal expansion of molten Al matrix sites without consumption of Al matrix. However, at the processing temperature range of 500-650 °C, C-CNTs can be grown on the bimetallic nanoparticle size <100 nm due to the presence of Al matrix in the bimetallic nanoparticles; SU-CNTs of large diameter (～60±13 nm) can also be grown on the bimetallic nanoparticle size >100 nm due to the isolation of Ni sites in the Al matrix.     

Synthesis of iron oxide nanoparticles in a polyimide matrix

A monolayer of gamma-Fe(2)O(3) nanoparticles embedded in a polyimide (PI) matrix was fabricated by oxidizing an Fe metal film between two PI precursor layers. There was a critical Fe thickness ( approximately 7 nm) above which a continuous layer of gamma-Fe(2)O(3) film was formed in the PI film. Below the critical Fe thickness, the oxide film broke up into fine particles whose size was approximately 8 nm with narrow size distribution. It was further shown that these nanoparticles could have metallic cores, surrounded by an oxide layer. This method offers a unique way of covering a large surface area with fine magnetic oxide nanoparticles for potential application in high-density data-storage media.     

Preparation and characterization of ultrafine co and ni particles in a polymer matrix

A facile route for in situ synthesis of Co and Ni nanoparticles in a preorganized polyacrylamide gel is reported. Metal-polymer composites were prepared by gamma-irradiation at room temperature. The Co nanoparticles were roughly 3-5 nm in size and were stable in the polymer matrix in the presence of air. The presence of Co and Ni nanoparticles was established by their ability to transfer an electron to methyl viologen {paraquat: 1,1'-dimethyl 4,4'-dipyridinium dichloride; MV(2+) (Cl(-))(2)}. The Co and Ni nanoparticles were probed for their magnetic characteristics by a superconducting quantum interferometer device (SQUID) magnetometer and display a low superparamagnetic blocking temperature T(B) of about 13 and 10 K, respectively. The field-dependent magnetic behavior below T(B) displays the standard features corresponding to superparamagnetism, as expected for very small Co and Ni crystallites. This also suggests that particles are polycrystalline in nature.     

Metal nanoparticle formation on layer silicate lamellae

Nanoparticles (Ag, Pd) were prepared by heterogeneous nucleation on the interlayer space of layered montmorillonite and kaolinite minerals in aquatic dispersion. Interlamellar incorporation of nanoparticles was monitored by X-ray diffraction and verified by transmission electron microscopy (TEM). After the reduction of adsorbed metal ions, a new Bragg reflection appeared, proving the formation of nanoparticles in the interlamellar space of clay mineral. Lamellar structure of layered silicates is partly destroyed by the particle formation. TEM images showed that larger nanoparticles were formed by UV irradiation and hydrazine hydrate than in the case of reduction by NaBH₄. Aqueous solutions of polyvinyl pyrrolidone and clay minerals were used for the stabilization of Pd° nanoparticles. The size of particles generated on the surface of clay minerals by heterogeneous nucleation increased with increasing metal concentration. When polymer is added to this system, particle size can be decreased by increasing polymer concentration. In this case, the particles are stabilized by the concerted action of the support and the macromolecule. The polymers promoted intercalation of nanoparticles into the clay mineral. In the absence of nanoparticles, the intercalation of polymers was significantly less extensive.     

Onion phases as biomimetic confined media for silica nanoparticle growth

Phospholipid onion phases were investigated as biomimetic media for the synthesis of silica in a confined environment. Stable multilamellar nanovesicles incorporating sodium silicate solutions could be obtained. Upon aging, silica condensation occurs in the onion interlayer space while preserving the initial multilamellar organization. The hybrid structure consists of an array of apparently unconnected silica nanoparticles in the 20-30 A size range packed in the vesicular 50 A interlayer space, suggesting that the silica growth was efficiently controlled by its confinement in the onion lamellar organization.     

Thermally Induced Growth of ZnO Nanocrystals on Mixed Metal Oxide Surfaces

An in situ method for the growth of ZnO nanocrystals on Zn/Al mixed metal oxide (MMO) surfaces is presented. The key to this method is the thermal treatment of Zn/Al layered double hydroxides (Zn/Al LDHs) in the presence of nitrate anions, which results in partial demixing of the LDH/MMO structure and the subsequent crystallization of ZnO crystals on the surface of the forming MMO layers. In a first experimental series, thermal treatment of Zn/Al LDHs with different fractions of nitrate and carbonate in the interlayer space was examined by thermogravimetry coupled with mass spectrometry (TG‐MS) and in situ XRD. In a second experimental series, Zn/Al LDHs with only carbonate in the interlayer space were thermally treated in the presence of different amounts of an external nitrate source (NH₄NO₃). All obtained Zn/Al MMO samples were analysed by electron microscopy, nitrogen physisorption and powder X‐ray diffraction. The gas phase formed during nitrate decomposition turned out to be responsible for the formation of crystalline ZnO nanoparticles. Accordingly, both interlayer nitrate and the presence of ammonium nitrate led to the formation of supported ZnO nanocrystals with mean diameters between 100 and 400 nm, and both methods offer the possibility to tailor the amount and size of the ZnO crystals by means of the amount of nitrate.     

Effect of the size of colloidal gold nanoparticles on the physical parameters of nanocomposite microcapsule shells

Polyelectrolyte shells of nanocomposite microcapsules containing colloidal gold nanoparticles of different diameters (5, 10, or 20 nm) are formed by the polyion assembly procedure. Microcapsules with different numbers of layers and structures are studied by transmission electron microscopy, atomic force microscopy, and confocal microscopy. The values of the thickness and roughness of microcapsule shells are determined and the dependence of these parameters on the size of gold nanoparticles constituting shells is investigated. It is established that the concentration of nanoparticles in polyelectrolyte shells of microcapsules decreases with an increase in particle diameter.     

A redox-active two-dimensional coordination polymer: preparation of silver and gold nanoparticles and crystal dynamics on guest removal

A two-dimensional (2D) square-grid coordination polymer, {[Ni(cyclam)]2[BPTC]}n.2nH2O (1), has been assembled from [Ni(cyclam)](ClO4)2 (cyclam = 1,4,8,11-tetraazacyclotetradecane) and H4BPTC (H4BPTC = 1,1'-biphenyl-2,2',6,6'-tetracarboxylic acid) in H2O/MeOH (2.5:1, v/v) in the presence of triethylamine. When solid 1 was immersed in the EtOH solutions of AgNO3 (1.3 x 10(-1) M) and NaAuCl4.2H2O (3.4 x 10(-2) M), respectively, for 5 min at room temperature, solids including Ag (3.7 +/- 0.4 nm, diameter) and Au (2 nm, diameter) nanoparticles were formed by the redox reactions between Ni(II) ions incorporated in 1 and metal ions, as evidenced by HRTEM images, EPR, and XPS spectra. When single-crystal 1 was heated at 180 degrees C under 10(-5) Torr for 24 h, it was transformed to dehydrated compound {[Ni(cyclam)]2[BPTC]}n (2) in the single-crystal-to-single-crystal manner. The X-ray crystal structure of 2 reveals extensive dynamic motions of the molecular components in response to guest removal, involving rotation of the carboxylate and macrocycle, swing of the biphenyl, and bending of the macrocyclic coordination plane toward the carboxylate plane, which reduces the interlayer distance.     

Sub-100 nm confinement of magnetic nanoparticles using localized magnetic field gradients

Ferromagnetic rods containing thin sections of diamagnetic metal create intense magnetic field gradients that attract and confine magnetic nanoparticles to regions of space as small as 20 nm. The rods (80 nm diameter) comprised alternating sections of CoNi ( approximately 350 nm) and Au (20-160 nm) formed by electrodeposition into porous polycarbonate membranes. Upon magnetizing the rods, large magnetic gradients (106-107 T/m) form at the boundaries between ferromagnetic and diamagnetic sections. These gradients attract and confine magnetic nanoparticles to attoliter volumes of space surrounding the rod. This method provides a new tool for generating intense, highly localized magnetic field gradients, by design, and confining magnetic nanoparticles in these gradients.     

New Pt(0) Nanoparticles as Highly Active and Reusable Catalysts in the C1–C3 Alcohol Oxidation and the Room Temperature Dehydrocoupling of Dimethylamine-Borane (DMAB)

New Pt(0) nanoparticles were easily and reproducibly prepared by the simultaneous reduction method using 1-butylamine (BA) and tributylamine (TBA) for the first time as capturing ligands at room temperature. X-ray diffraction, X-ray photoelectron microscopy and transmission electron microscopy measurements verify the formation of well-dispersed Pt(0) nanoparticles [~3.63 and ~3.98 nm for catalysts prepared using BA (catalyst I) and TBA (catalyst II), respectively] on an activated carbon surface. The catalytic performances of these nanoparticles in terms of activity, isolability and reusability were investigated for both alcohol oxidation and the dehydrocoupling of dimethylamine-borane (DMAB). These nanoparticles were shown to be as active and reusable heterogeneous catalysts even at room temperature. The prepared catalysts can catalyze the dehydrogenation of DMAB with one of the highest known activities at room temperature and also C1–C3 alcohol oxidation with very high electrochemical activities.     

Characterization of magnetic nanoparticles using energy-selected transmission electron microscopy.

Fe, Co, and Ni magnetic nanoparticles have been characterized using energy-selected imaging in a high-resolution transmission electron microscope. The samples comprised Fe/FeO x and Co/CoO x nanoparticles synthesized by inert gas evaporation and a Ni/C nano-composite prepared by a sonochemical method. All of the particles examined were found to be between 5 and 30 nm in size, with the Fe and Co crystals coated in 5-10 nm of metal oxide layer and the Ni metallic crystallites embedded in an amorphous carbon spherical matrix.