A novel consecutive chain transfer reaction to p-methylstyrene and hydrogen during metallocene-mediated olefin polymerization.

This paper describes the first example of consecutive chain transfer reaction, first to p-methylstyrene (or styrene) and then to hydrogen, during metallocene-catalyzed propylene polymerization by rac-Me(2)Si[2-Me-4-Ph(Ind)](2)ZrCl(2)/MAO complex. The PP molecular weight is inversely proportional to the molar ratio of [p-methylstyrene]/[propylene] and [styrene]/[propylene] with the chain transfer constants of k(tr)/k(p) = 1/6.36 and 1/7.5, respectively. Although hydrogen does not influence the polymer molecular weight, it greatly affects the catalyst activity. Each PP chain formed contains a terminal p-methylstyrene (or styrene) unit. The terminal p-MS unit can be metalated to form a stable polymeric anion for living anionic polymerization to prepare new PP diblock copolymers, such as PP-b-PS, which are very difficult to prepare by other methods. The overall process resembles a transformation reaction from metallocene to living anionic polymerization.     

Formation of dinuclear titanium and zirconium complexes by olefin metathesis--catalytic preparation of organometallic catalyst systems

The titanium complex [(C(5)H(4)bond;allyl)TiCl(3)] (2) undergoes olefin metathesis coupling when treated with 3 mol % of [Cl(2)(L(1))(L(2))Ru=CHPh] (L(1)=L(2)=PCy(3), 4 a; L(1)=PCy(3), L(2)=(H(2)IMes), 4 b) to yield the dimetallic complex [Cl(3)Ti(C(5)H(4))-CH(2)CH=CHCH(2)-(C(5)H(4))TiCl(3)] (5). The allyl-substituted titanocene complex [Cp(C(5)H(4)bond;allyl)TiCl(2)] (3) analogously yields the dimetallic system 6 when treated with 4. The ansa-zirconocene complex [Me(2)Si(C(5)H(4))(C(5)H(3)bond;allyl)ZrCl(2)] (7) cleanly yields the analogous dimetallic coupling product 8 (>95 % isomerically pure), when treated with catalytic amounts of 4 b in toluene. Complex 8 gives an active homogeneous ethene or propene polymerization catalyst, especially at elevated temperatures, when treated with excess methylalumoxane.     

Enantioselective synthesis of ansa-zirconocenes

The reaction of the chiral chelated bis-amide complex Zr{(2R,4R)-PhNCHMeCH2CHMeNPh}Cl2(THF)2 (R,R-7) with lithium ansa-bis-indenyl reagents Li2[SBI](Et2O) (8a, SBI = (1-indenyl)2SiMe2) or Li2[EBI](Et2O) (8b, EBI = 1,2-(1-indenyl)2ethane) in THF affords the corresponding ansa-zirconocenes S,S-(SBI)Zr{(2R,4R)-PhNCHMeCH2CHMeNPh} (S,S,R,R-9a) or S,S-(EBI)Zr{(2R,4R)-PhNCHMeCH2CHMeNPh} (S,S,R,R-9b) in >95% isolated yield and >99% enantiomeric excess. Compound 9b was converted to the corresponding enantiomerically pure dichloride S,S-(EBI)ZrCl2 (S,S-10b) in 91% isolated yield by reaction with HCl in Et2O. The chiral diamine (2R,4R)-HPhNCHMeCH2CHMeNHPh (R,R-5) was recovered from this reaction.     

Highly active ethylene polymerization and regioselective 1-hexene oligomerization using zirconium and titanium catalysts with tridentate [ONO] ligands

A series of tridentate dianionic ligands [4-(t)Bu-6-R-2-(3-R'-5-(t)Bu-2-OC(6)H(2))N=CH C(6)H(2)O](2-) (L) [R = R' = (t)Bu (L1); R = CMe(2)Ph, R' = (t)Bu (L2); R = adamantyl, R' = (t)Bu (L3); R = R' = CMe(2)Ph (L4); R = SiMe(2)(t)Bu, R' = CMe(2)Ph (L5)] were synthesized. Reactions of TiCl(4) with 1 equiv of ligands L1-L5 in toluene afford five-coordinate titanium complexes with general formula LTiCl(2) [L = L1 (1); L2 (2); L3 (3); L4 (4); L5 (5)]. The addition of tetrahydrofuran (THF) to titanium complex 5 readily gives THF-solvated six-coordinate complex 6, which also was obtained by reaction of TiCl(4) with 1 equiv of ligand L5 in THF. Reactions of ZrCl(4) with 1 or 2 equiv of ligands L1-L5 afford six-coordinate zirconium mono(ligand) complexes LZrCl(2)(THF) [L = L2 (7); L4 (8); L5 (9)], and bis(ligand) complexes L(2)Zr [L = L1 (10); L4 (11)]. The molecular structures of complexes 2, 8, and 11 were established by single-crystal X-ray diffraction studies. Upon activation with methylaluminoxane, complexes 1-9 are active for ethylene polymerization. The activities and half-lifes of the catalyst systems based on zirconium complexes are more than 10(6) g of polyethylene (mol Zr)(-1) h(-1) and 6 h, respectively. Complex 9 is more active and long-lived, with a turnover frequency (TOF) of 2.6 × 10(5) (mol C(2)H(4)) (mol Zr)(-1) h(-1), a half-life of >16 h, and a total turnover number (TON) of more than 10(6) (mol C(2)H(4)) (mol Zr)(-1) at 20 °C and 0.5 MPa pressure. Even at 80 °C, complex 9/MAO catalyst system has a long lifetime (t(1/2) > 2 h), as well as high activity that is comparable with that at 20 °C. When activated with methylaluminoxane (MAO), complex 9 also show moderate catalytic activity and more than 99% 2,1-regioselectivity for 1-hexene oligomerization.     

球形MgCl_2负载的MAO-Et[Ind]_2ZrCl_2催化剂用于乙烯聚合的动力学研究

以Al(i Bu) 3 为活化剂 ,对球形MgCl2 负载的MAO Et[Ind]2 ZrCl2 催化剂用于乙烯淤浆聚合的动力学进行了研究 .确定了动力学控制条件后 ,测定了聚合反应级数和表观活化能 ,用动力学外推法计算出活性中心浓度和链增长速率常数 ,用扫描电镜观察了聚合过程中聚合物形态的变化 ,发现聚合是在催化剂的次级粒子上进行 ,催化剂粒子无明显破碎     

球形MgCl2负载的MAO/rac-Et[Ind]2ZrCl2催化剂催化丙烯 聚合

采用只在球形MgCl2上负载MAO,聚合前再同rac--Et[Ind]2ZrCl2预混的负载方式进行丙烯聚合。在少量AlEt3的活化下,很低的Al(MAO)/Zr摩尔比时即可获得比均相催化剂高一个数量级的活性,考察了温度、压力、Al(MAO)/Zr摩尔比和催化剂浓度对聚合的影响,同时用13^CNMR测定了均相和载体催化体系所制备的聚丙烯的微结构,发现负载型茂金属催化剂制得的聚丙烯立构规整性高于均相体系,其五元组立构序列[mmmm]可从均相的52.6%提高到负载催化剂的79.5%。扫描电镜观察表明,聚合物颗粒可较好地复制球形催化剂的颗粒形态。     

Cp2ZrCl2/异丁基铝氧烷催化乙烯聚合动力学

均相茂金属催化烯烃聚合体系大多采用甲基铝氧烷(MAO)为助催化剂,但对MAO的作用机理尚不清楚。据文献报道,乙基铝氧烷(EAO)和异丁基铝氧烷(BAO)也有类似的助催化作用,但聚合活性远低于MAO体系。     

Cationic alkylaluminum-complexed zirconocene hydrides: NMR-spectroscopic identification, crystallographic structure determination, and interconversion with other zirconocene cations

The ansa-zirconocene complex rac-Me(2)Si(1-indenyl)(2)ZrCl(2) ((SBI)ZrCl(2)) reacts with diisobutylaluminum hydride and trityl tetrakis(perfluorophenyl)borate in hydrocarbon solutions to give the cation [(SBI)Zr(μ-H)(3)(Al(i)Bu(2))(2)](+), the identity of which is derived from NMR data and supported by a crystallographic structure determination. Analogous reactions proceed with many other zirconocene dichloride complexes. [(SBI)Zr(μ-H)(3)(Al(i)Bu(2))(2)](+) reacts reversibly with ClAl(i)Bu(2) to give the dichloro-bridged cation [(SBI)Zr(μ-Cl)(2)Al(i)Bu(2)](+). Reaction with AlMe(3) first leads to mixed-alkyl species [(SBI)Zr(μ-H)(3)(AlMe(x)(i)Bu(2-x))(2)](+) by exchange of alkyl groups between aluminum centers. At higher AlMe(3)/Zr ratios, [(SBI)Zr(μ-Me)(2)AlMe(2)](+), a constituent of methylalumoxane-activated catalyst systems, is formed in an equilibrium, in which the hydride cation [(SBI)Zr(μ-H)(3)(AlR(2))(2)](+) strongly predominates at comparable HAl(i)Bu(2) and AlMe(3) concentrations, thus implicating the presence of this hydride cation in olefin polymerization catalyst systems.     

Reactivity of secondary metallocene alkyls and the question of dormant sites in catalytic alkene polymerization

The reactivity of [rac-(C2H4(1-indenyl)2)Zr(n-butyl)][MeB(C6F5)3] (4), [rac-(C2H4(1-indenyl)2)Zr(sec-butyl)][MeB(C6F5)3] (5), and [rac-(C2H4(1-indenyl)2)Zr(polypropenyl)][MeB(C6F5)3] with propene, ethene, and hydrogen was studied by low-temperature (<-40 degrees C) 1H and 13C NMR spectroscopy in toluene solutions. In contrast with previous suggestions that 2 degrees zirconium alkyl species such as 5 are dormant sites, these measurements demonstrate reactivity of 2 degrees zirconium alkyls with propene and ethene comparable to the 1 degrees zirconium alkyl species 4 and [rac-(C2H4(1-indenyl)2)Zr(polypropenyl)][MeB(C6F5)3]. Because 2,1-insertion of propene is an infrequent event, these results preclude significant accumulation of catalyst in the form of 2 degrees zirconium alkyls for this metallocene and counterion. The reactivity of 5 with hydrogen is at least 2 orders of magnitude faster than other 1 degrees zirconium alkyls. Such high reactivity accounts for the puzzlingly high fraction of butyl end groups in prior hydrooligomerization studies and implies that catalyst responsivity to H2 as a molecular weight control agent correlates with the regioselectivity of the catalyst.     

Synthesis, structure, and substitution mechanism of new Ru(II) complexes containing 1,4,7-trithiacyclononane and 1,10-phenanthroline ligands

Two new Ru complexes containing the 1,10-phenanthroline (phen) and 1,4,7-trithiacyclononane ([9]aneS3, SCH2CH2SCH2CH2SCH2CH2) ligands of general formula [Ru(phen)(L)([9]aneS3)]2+ (L = MeCN, 3; L = pyridine (py), 4) have been prepared and thoroughly characterized. Structural characterization in the solid state has been performed by means of X-ray diffraction analyses, which show a distorted octahedral environment for a diamagnetic d6 Ru(II), as expected. 1H NMR spectroscopy provides evidence that the same structural arrangement is maintained in solution. Further spectroscopic characterization has been carried out by UV-vis spectroscopy where the higher acceptor capability of MeCN versus the py ligand is manifested in a 9-15-nm blue shift in its MLCT bands. The E1/2 redox potential of the Ru(III)/Ru(II) couple for 3 is anodically shifted with respect to its Ru-py analogue, 4, by 60 mV, which is also in agreement with a higher electron-withdrawing capacity of the former. The mechanism for the reaction Ru-py + MeCN--> Ru-MeCN + py has also been investigated at different temperatures with and without irradiation. In the absence of irradiation at 326 K, the thermal process gives kinetic constants of k2 = 1.4 x 10(-5) s(-1) (DeltaH(++) = 108 +/- 3 kJ mol(-1), DeltaS(++) = -8 +/- 9 J K(-1) mol(-1)) and k-2 = 2.9 x 10(-6) s(-1) (DeltaH(++) = 121 +/- 1 kJ mol(-1), DeltaS(++) = 18 +/- 3 J K(-1) mol(-1)). The phototriggered process is faster and consists of preequilibrium formation of an intermediate that thermally decays to the final Ru-MeCN complex with an apparent rate constant of (k1Khnu)app = 1.8 x 10(-4) s(-1) at 304 K, under the continuous irradiation experimental conditions used.     

Kinetics and mechanism of bromate-bromide reaction catalyzed by acetate

The initial rate of the bromate-bromide reaction, BrO3- + 5Br- + 6H+ --> 3Br2 + 3H2O, has been measured at constant ionic strength, I = 3.0 mol L(-1), and at several initial concentrations of acetate, bromate, bromide, and perchloric acid. The reaction was followed at the Br2/Br3- isosbestic point (lambda = 446 nm) by the stopped-flow technique. A very complex behavior was found such that the results could be fitted only by a six term rate law, nu = k1[BrO3-][Br-][H+]2 + k2[BrO3-][Br-]2[H+]2 + k3[BrO3-][H+]2[acetate]2 + k4[BrO3-][Br-]2[H+]2[acetate] + k5[BrO3-][Br-][H+]3[acetate]2 + k6[BrO3-][Br-][H+]2[acetate], where k1 = 4.12 L3 mol(-3) s(-1), k2 = 0.810 L4 mol(-4) s(-1), k3 = 2.80 x 10(3) L4 mol(-4) s(-1), k4 = 278 L5 mol(-5) s(-1), k5 = 5.45 x 10(7) L6 mol(-6) s(-1), and k6 = 850 L4 mol(-4) s(-1). A mechanism, based on elementary steps, is proposed to explain each term of the rate law. This mechanism considers that when acetate binds to bromate it facilitates its second protonation.     

Mechanism of ruthenium-catalyzed hydrogen transfer reactions. Concerted transfer of OH and CH hydrogens from an alcohol to a (Cyclopentadienone)ruthenium complex

Kinetic studies of the ruthenium-catalyzed dehydrogenation of 1-(4-fluorophenyl)ethanol (4) by tetrafluorobenzoquinone (7) using the Shvo catalyst 1 at 70 degrees C show that the dehydrogenation by catalytic intermediate 2 is rate-determining with the rate = k[4][1](1/2) and with deltaH++ = 17.7 kcal mol(-1) and deltaS++ = -13.0 eu. The use of specifically deuterated derivative 4-CHOD and 4-CDOH gave individual isotope effects of k(CHOH)/k(CHOD) = 1.87 +/- 0.17 and k(CHOH)/k(CDOH) = 2.57 +/- 0.26, respectively. Dideuterated derivative 4-CDOD gave a combined isotope effect of k(CHOH)/k(CDOD) = 4.61 +/- 0.37. These isotope effects are consistent with a concerted transfer of both hydrogens of the alcohol to ruthenium species 2.     

琥珀酸酐均相催化加氢生成γ-丁内酯的反应动力学研究

以RuCl3 /PPh3 为催化剂体系研究了琥珀酸酐均相催化加氢反应动力学 .结果表明当催化剂浓度小于1.0× 10 -2 mol /L ,n(PPh3 ) /n(Ru) =7,SA浓度小于 2 .2 5mol /L和反应氢压PH2 小于 2 .2 5MPa时 ,反应速率方程为R =k1[Ru][SA]PH2 ;当反应氢压PH2 大于 2 .77MPa时 ,反应速率方程为R =k2 [Ru][SA].琥珀酸酐加氢生成γ -丁内酯的活化能Ea为 85 .2kJ/mol,活化焓△H≠ 为 81.8kJ /mol     

Bimolecular kinetic studies with high-temperature gas-phase 19F NMR: cycloaddition reactions of fluoroolefins

A gas-phase NMR kinetic technique has been used for the first time to obtain accurate measurements of rate constants of some bimolecular, second-order cycloaddition reactions. As a test of the potential use of this technique for the study of second-order reactions, the rate constants and the activation parameters for the cyclodimerization reactions of chlorotrifluoroethylene (CTFE) and tetrafluoroethylene (TFE) were determined in the temperature range 240-340 degrees C, using a commercial high-temperature NMR probe. Obtaining excellent agreement of the results with published data, the technique was then applied to the reaction of 1,1-difluoroallene with 1,3-butadiene, the results of which indicate that the use of gas-phase NMR for reaction kinetics is particularly valuable when a reagent is available only in small amounts and in cases where there are several competing processes occurring simultaneously. The major processes observed in this reaction are regioselective [2+2] and [2+4] cycloadditions, whose rates and activation parameters were determined [k2 = 9.3 x 10(6) exp(-20.1 kcal x mol(-1)/RT) L/mol(-1) x s(-1) and k3 = 1.2 x 10(6) exp(-18.4 kcal x mol(-1)/RT) L/mol(-1) x s(-)(1), respectively] in the temperature range 130-210 degrees C.     

Living polymerization of ethylene catalyzed by titanium complexes having fluorine-containing phenoxy-imine chelate ligands

Seven titanium complexes bearing fluorine-containing phenoxy-imine chelate ligands, TiCl(2)[eta(2)-1-[C(H)=NR]-2-O-3-(t)Bu-C(6)H(3)](2) [R = 2,3,4,5,6-pentafluorophenyl (1), R = 2,4,6-trifluorophenyl (2), R = 2,6-difluorophenyl (3), R = 2-fluorophenyl (4), R = 3,4,5-trifluorophenyl (5), R = 3,5-difluorophenyl (6), R = 4-fluorophenyl (7)], were synthesized from the lithium salt of the requisite ligand and TiCl(4) in good yields (22%-76%). X-ray analysis revealed that the complexes 1 and 3 adopt a distorted octahedral structure in which the two phenoxy oxygens are situated in the trans-position while the two imine nitrogens and the two chlorine atoms are located cis to one another, the same spatial disposition as that for the corresponding nonfluorinated complex. Although the Ti-O, Ti-N, and Ti-Cl bond distances for complexes 1 and 3 are very similar to those for the nonfluorinated complex, the bond angles between the ligands (e.g., O-Ti-O, N-Ti-N, and Cl-Ti-Cl) and the Ti-N-C-C torsion angles involving the phenyl on the imine nitrogen are different from those for the nonfluorinated complex, as a result of the introduction of fluorine atoms. Complex 1/methylalumoxane (MAO) catalyst system promoted living ethylene polymerization to produce high molecular weight polyethylenes (M(n) > 400 000) with extremely narrow polydispersities (M(w)/M(n) < 1.20). Very high activities (TOF > 20 000 min(-1) atm(-1)) were observed that are comparable to those of Cp(2)ZrCl(2)/MAO at high polymerization temperatures (25, 50 degrees C). Complexes 2-4, which have a fluorine atom adjacent to the imine nitrogen, behaved as living ethylene polymerization catalysts at 50 degrees C, whereas complexes 5-7, possessing no fluorine adjacent to the imine nitrogen, produced polyethylenes having M(w)/M(n) values of ca. 2 with beta-hydrogen transfer as the main termination pathway. These results together with DFT calculations suggested that the presence of a fluorine atom adjacent to the imine nitrogen is a requirement for the high-temperature living polymerization, and the fluorine of the active species for ethylene polymerization interacts with a beta-hydrogen of a polymer chain, resulting in the prevention of beta-hydrogen transfer. This catalyst system was used for the synthesis of a number of unique block copolymers such as polyethylene-b-poly(ethylene-co-propylene) diblock copolymer and polyethylene-b-poly(ethylene-co-propylene)-b-syndiotactic polypropylene triblock copolymer from ethylene and propylene.     

Synthesis, structures, and reactivity of weakly coordinating anions with delocalized borate structure: the assessment of anion effects in metallocene polymerization catalysts.

The formation of adducts of tris(pentafluorophenyl)borane with strongly coordinating anions such as CN(-) and [M(CN)(4)](2)(-) (M = Ni, Pd) is a synthetically facile route to the bulky, very weakly coordinating anions [CN[B(C(6)F(5))(3)](2)](-) and [M[CNB(C(6)F(5))(3)](4)](2-) which are isolated as stable NHMe(2)Ph(+) and CPh(3)(+) salts. The crystal structures of [CPh(3)][CN[B(C(6)F(5))(3)](2)] (1), [CPh(3)][ClB(C(6)F(5))(3)] (2), [NHMe(2)Ph](2)[Ni[CNB(C(6)F(5))(3)](4)].2Me(2)CO (4b.2Me(2)CO), [CPh(3)](2)[Ni[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (4c.2CH(2)Cl(2)), and [CPh(3)](2)[Pd[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (5c.2CH(2)Cl(2)) are reported. The CN stretching frequencies in 4 and 5 are shifted by approximately 110 cm(-1) to higher wavenumbers compared to the parent tetracyano complexes in aqueous solution, although the M-C and C-N distances show no significant change on B(C(6)F(5))(3) coordination. Zirconocene dimethyl complexes L(2)ZrMe(2) [L(2) = Cp(2), SBI = rac-Me(2)Si(Ind)(2)] react with 1, 4c or 5c in benzene solution at 20 degrees C to give the salts of binuclear methyl-bridged cations, [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] and [(L(2)ZrMe)(2)(mu-Me)](2)[M[CNB(C(6)F(5))(3)](4)]. The reactivity of these species in solution was studied in comparison with the known [[(SBI)ZrMe](2)(mu-Me)][B(C(6)F(5))(4)]. While the latter reacts with excess [CPh(3)][B(C(6)F(5))(4)] in benzene to give the mononuclear ion pair [(SBI)ZrMe(+).B(C(6)F(5))(4)(-)] in a pseudo-first-order reaction, k = 3 x 10(-4) s(-1), [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] reacts to give a mixture of L(2)ZrMe(mu-Me)B(C(6)F(5))(3) and L(2)ZrMe(mu-NC)B(C(6)F(5))(3). Recrystallization of [Cp' '(2)Zr(mu-Me)(2)AlMe(2)][CN[B(C(6)F(5))(3)](2)] affords Cp' '(2)ZrMe(mu-NC)B(C(6)F(5))(3) 6, the X-ray structure of which is reported. The stability of [(L(2)ZrMe)(2)(mu-Me)](+)X(-) decreases in the order X = [B(C(6)F(5))(4)] > [M[CNB(C(6)F(5))(3)](4)] > [CN[B(C(6)F(5))(3)](2)] and increases strongly with the steric bulk of L(2) = Cp(2) < SBI. Activation of (SBI)ZrMe(2) by 1 in the presence of AlBu(i)(3) gives extremely active ethene polymerization catalysts. Polymerization studies at 1-7 bar monomer pressure suggest that these, and by implication most other highly active ethene polymerization catalysts, are strongly mass-transport limited. By contrast, monitoring propene polymerization activities with the systems (SBI)ZrMe(2)/1/AlBu(i)(3) and CGCTiMe(2)/1/AlBu(i)(3) at 20 degrees C as a function of catalyst concentration demonstrates that in these cases mass-transport limitation is absent up to [metal] approximately 2 x 10(-5) mol L(-1). Propene polymerization activities decrease in the order [CN[B(C(6)F(5))(3)](2)](-) > [B(C(6)F(5))(4)](-) > [M[CNB(C(6)F(5))(3)](4)](2-) > [MeB(C(6)F(5))(3)](-), with differences in activation barriers relative to [CN[B(C(6)F(5))(3)](2)](-) of DeltaDeltaG = 1.1 (B(C(6)F(5))(4)(-)), 4.1 (Ni[CNB(C(6)F(5))(3)](4)(2-)) and 10.7-12.8 kJ mol(-)(1) (MeB(C(6)F(5))(3)(-)). The data suggest that even in the case of very bulky anions with delocalized negative charge the displacement of the anion by the monomer must be involved in the rate-limiting step.     

Use of gas-phase (1)H NMR to determine the kinetics of unimolecular rearrangement of 2,2-dichloro-1-methylenecyclopropane and the bimolecular dimerization of (dichloromethylene)cyclopropane

Gas-phase (1)H NMR analysis has been applied to investigate the kinetics of the unimolecular rearrangement of 2,2-dichloro-1-methylenecyclopropane (1) to (dichloromethylene)cyclopropane (2) [k(1) = 7.9 x 10(12) exp(-34.4 +/- 0.6 kcal mol(-1)/RT)], as well as for the subsequent second-order dimerization of 2 [k(2) = 2.4 x 10(6) exp(-18.5 +/- 1.1 kcal mol(-1)/RT)] to form 7,7,8,8-tetrachlorodispiro[2.0.2.2]octane (3)     

Propene polymerization using homogeneous MAO-activated metallocene catalysts: Me2Si(Benz[e]Indenyl)2ZrCl2/MAO vs. Me2Si(2-Me-Benz[e]Indenyl)2ZrCl2/MAO

Propene was polymerized at 40°C and 2-bar propene in toluene using methylalumoxane (MAO) activated rac-Me₂Si(Benz[e]Indenyl)₂ZrCl₂ ( BI ) and rac-Me₂Si(2-Me-Benz[e]Indenyl)₂ZrCl₂ ( MBI ). Catalyst BI /MAO polymerizes propene with high activity to afford low molecular weight polypropylene, whereas MBI /MAO is less active and produces high molecular weight polypropylene. Variation of reaction conditions such as propene concentration, temperature, concentration of catalyst components, and addition of hydrogen reveals that the lower molecular weight polypropylene produced with BI /MAO results from chain transfer to propene monomer following a 2,1-insertion. A large fraction of both metallocene catalyst systems is deactivated upon 2,1-insertion. Such dormant sites can be reactivated by H₂-addition, which affords active metallocene hydrides. This effect of H₂-addition is reflected by a decreasing content of head-to-head enchainment and the formation of polypropylene with n-butyl end groups. Both catalysts show a strong dependence of activity on propene concentration that indicates a formal reaction order of 1.7 with respect to propene. MBI /MAO shows a much higher dependence of the activity on temperature than BI /MAO. At elevated temperatures, MBI /MAO polymerizes propene faster than BI /MAO. © 1995 John Wiley & Sons, Inc.     

Heteropolynuclear palladium complexes with pyrazolate and its 3-tert-butyl derivatives: the effect of heterometal ions on the rate of isomerization

The heteropolynuclear complexes [Pd(2)M'(2)(mu-pz)(6)] (M'=Ag (1), Au (2); pzH=pyrazole), HT-[Pd(2)M'(2)(mu-3-tBupz)(6)] (M'=Ag (3 a), Au (4 a); 3-tBupzH=3-tert-butylpyrazole), and HH-[Pd(2)Au(2)(mu-3-tBupz)(6)] (4 b) have been prepared and some of them were structurally characterized. When 3-tert-butylpyrazolate was employed as a bridging ligand, two linkage isomers (head-to-tail (HT) and head-to-head (HH)) arise from the difference in orientation of the substituent groups on the pyrazolate bridges between the two Pd atoms. (1)H NMR spectroscopy has been used to identify and to follow the reversible stereochemical rearrangement of the HH isomer of [Pd(2)Ag(2)(mu-3-tBupz)(6)] (3 b) to form the HT isomer 3 a in CDCl(3) and the HT isomer of [Pd(2)Au(2)(mu-3-tBupz)(6)] (4 a) to form the HH isomer 4 b in C(6)D(6). Kinetic studies of the reaction have established the rate law to be -d(HH)/dt=d(HT)/dt=k(2)[HH]-k(1)[HT] for 3 b and -d(HT)/dt=d(HH)/dt=k(1)[HT]-k(2)[HH] for 4 a, where k(1) and k(2) denote the rate of isomerization from the HT to the HH isomer and that from the HH to the HT isomer, respectively. For typical runs at 50 degrees C in C(6)D(6), k(1)=13.8x10(-5) s(-1), k(2)=18.6x10(-5) s(-1), and K(eq)=k(2)/k(1)=1.24 for 3 b, and k(1)=1.26x10(-5) s(-1), k(2)=3.52x10(-5) s(-1), and K(eq)=k(1)/k(2)=0.36 for 4 a. Temperature-dependent rate measurements reveal DeltaH(not equal) and DeltaS(not equal) to be 100(1) kJ mol(-1) and 0(3) J mol(-1) K(-1) for 3 b and 112(5) kJ mol(-1) and 20(17) J mol(-1) K(-1) for 4 a, respectively. The rate of isomerization is essentially unaffected by the concentration of the complex or by the presence of neutral bridging ligands. These data and observations imply that the isomerization involves an intramolecular exchange process.     

Activation of the sulfhydryl group by Mo centers: kinetics of reaction of benzyl radical with a binuclear Mo(micro-SH)Mo complex and with arene and alkane thiols

This paper provides evidence from kinetic experiments and electronic structure calculations of a significantly reduced S-H bond strength in the Mo(micro-SH)Mo function in the homogeneous catalyst model, CpMo(micro-S)(2)(micro-SH)(2)MoCp (1, Cp = eta(5)-cyclopentadienyl). The reactivity of 1 was explored by determination of a rate expression for hydrogen atom abstraction by benzyl radical from 1 (log(k(abs)/M(-)(1) s(-)(1)) = (9.07 +/- 0.38) - (3.62 +/- 0.58)/theta) for comparison with expressions for CH(3)(CH(2))(7)SH, log(k(abs)/M(-)(1) s(-)(1)) = (7.88 +/- 0.35) - (4.64 +/- 0.54)/theta, and for 2-mercaptonaphthalene, log(k(abs)/M(-)(1) s(-)(1)) = (8.21 +/- 0.17) - (4.24 +/- 0.26)/theta (theta = 2.303RT kcal/mol, 2sigma error). The rate constant for hydrogen atom abstraction at 298 K by benzyl radical from 1 is 2 orders of magnitude greater than that from 1-octanethiol, resulting from the predicted (DFT) S-H bond strength of 1 of 73 kcal/mol. The radical CpMo(micro-S)(3)(micro-SH)MoCp, 2, is revealed, from the properties of slow self-reaction, and exclusive cross-combination with reactive benzyl radical, to be a persistent free radical.