Structural, Spectroscopic, and Thermal Behaviour of Bis-(thiosaccharinate)-aqua-cadmium(II)

Summary.  The crystal structure of the title complex, [Cd(tsac)₂(H₂O)], has been determined by single crystal X-ray diffraction methods. It crystallizes in the monoclinic space group C2/c (a = 12.236(3), b = 8.919(3), c = 16.655(3) ?, β = 96.18(2)°, Z = 4). The molecular structure was solved from 1705 independent reflections with I > σ(I) and refined to R ₁ = 0.0489. Infrared and Raman spectra of the complex were recorded and are briefly discussed. Its thermal behaviour was investigated by thermogravimetry and differential thermal analysis. Received December 18, 2000. Accepted February 19, 2001     

X-Ray Diffraction and Raman Spectroscopic Study of Bis-(Pyridine Base) Complexes of Cadmium(II) Halogenides

Summary.  The molecular structures of bis-(pyridine base) complexes of cadmium(II) chloride and bromide, where the pyridine base is pyridine ( py), 3-methylpyridine (3-Me-py), 4-methylpyridine (4-Me-py), and 4-ethylpyridine (4-Et-py), were investigated by means of single-crystal X-ray diffraction and Raman spectroscopy. The crystal structures of CdCl₂ py ₂ (1), CdCl₂(3-Me-py)₂ (2), and CdCl₂(4-Me-py)₂ (3) were determined. All crystals are monoclinic; 1: a = 17.784(2), b = 8.666(1), c = 3.8252(7) ?, β = 91.54(1)°, space group: P2₁/n; 2: a = 11.89(1), b = 14.41(1), c = 3.874(6) ?, β = 92.3(1)°, space group: P2₁/a; 3: a = 21.091(2), b = 3.8884(5), c = 18.2317(3) ?, β = 113.64(1)°, space group: C2/c. The structures were refined to R/R _w values (%) of 3.2/5.5, 3.0/5.0, and 3.4/5.1 for 1–3. All cadmium atoms are octahedrally coordinated with the chloride ions forming infinite di-μ-chloro polymeric linear chains and the nitrogen atoms of the pyridine base in trans configuration. The Cd chains are oriented along the c-axis in 1 and 2 and along the b-axis in 3. The crystal structures indicate the absence of a peculiar interaction between the polymeric chains. The Raman spectra of eight complexes were measured in the range of 550–50 cm⁻¹, and the Raman peaks originating from cadmium-halogen vibrations were assigned. The Raman spectra of 1 and 2 are quite alike in the lattice mode vibration region. The resemblance of the cadmium-halogen vibration peaks indicates the same halogenide ion bridged octahedral structure for all complexes. Received March 27, 2001. Accepted (revised) June 19, 2001     

Characterization of Surface Modified Silica Nanoparticles by 29Si Solid State NMR Spectroscopy

 Various aerosils surface modified with silane reagents were prepared and investigated by ²⁹Si solid state NMR spectroscopy. The mode of bonding onto the silanol surface (mono- or divalent) can be specified by comparison with chemical shifts from solution. A detailed analysis also leads to the detection of products formed via hydrosilylation reactions. A rough quantification of the surface loading can be obtained by a signal deconvolution process of the silanol resonances on the Aerosil surface.     

Quantitative Analysis of Ti-Si-Ge/Si-Ge/Si Structures by EDS and AES

 A method for quantitative analysis of Ti-Si-Ge/Si-Ge/Si structures with submicron thick layers by energy dispersive spectroscopy (EDS) in transmission electron microscopy (TEM) and Auger electron spectroscopy (AES) was developed. Quantitation of the results of both AES and EDS techniques was performed on the basis of a single reference specimen for the Ti-Si-Ge system comprising a uniform layer of the Ti(Si_0.85Ge_0.15)₂ phase on a silicon substrate. The reference sample was prepared by the same procedure as the samples used in the study, and was thoroughly characterized by X-ray diffractometry, transmission electron microscopy and energy dispersive spectroscopy in scanning electron microscopy. Using this reference sample the elemental sensitivity factors relative to Si were found for both techniques, which enable us to obtain the elemental depth distributions for the studied samples. Good agreement between the results obtained by EDS/TEM, AES and supplementary techniques was found.     

Fourier Transform Infrared Spectroscopy and Solid Phase Extraction Applied to the Determination of Oil and Grease in Water Matrices

 The solid phase extraction as a solvent-free method for the analysis of oil and grease in waters was studied. The use of a PTFE surface as a solid phase allows the retention of the volatile fraction of oil and grease, and further analysis of carbon–hydrogen bonds using infrared spectroscopy can be done on the surface. Various oils and grease samples were tested: n-hexadecane, n-tetradecane, n-nonadecane, n-docosane, isooctane, diesel oil and gasoline. Temperatures from 25° to 90 °C and a range of heating times were checked for extraction. Precision tests showed relative standard deviation values of around 10% in several samples of the same concentration. Calibration lines of n-hexadecane showed high correlation coefficients from 0.9 to 30 mg/l. Recoveries for the various oils using different calibration lines showed values from 90 to 110%. The method described here is fast and clean, and allows reproducible measurements of oil and grease in water that do not require the use of a solvent. Received March 1, 2001; accepted August 15, 2001; published online July 15, 2002     

Optimization of a Direct Sample Insertion Into a Stabilized Capacitive Plasma for Optical Emission Spectrometry (SCP-OES)

 A new sample insertion device for the stabilized capacitive plasma (SCP) has been developed, which enables it to analyze dry residues of micro amounts of liquid samples. Insertion was applied into an SCP as plasma source because of its good stability and excitation properties as well as its low instrument and operation costs. The plasma is sustained at a frequency of 27.12 MHz and an RF power of 150 W. For analysis the liquid samples are positioned at the tip of a quartz rod with the aid of a μL syringe. Then the sample is dried and the sampling rod inserted into the plasma. After optimization of the carrier gas flow (5 L/h) and the sample volume (20 μL) the detection limit for Pb with Ar as plasma gas is 200 pg. By further improving the guidance of the insertion detection limits for Pb, Cu, Cd and Mg in the 1 to 30 ng/mL range or 20 to 600 pg range absolute were obtained. It was found that the detection limits in the case of He are better than those obtained with Ar. The matrix interferences caused by changes in the concentration of the easily ionizable element Na were found to be below 10% for Na concentrations of up to 0.45 μg/mL. Ethanol concentrations of up to 14% in the analyte solutions did not cause any interferences. Received December 17, 1998. Revision June 4, 1999.     

地鳖纤溶活性蛋白(EFP)的分离纯化、红外光谱分析及抑制鸡胚尿囊膜(CAM)血管生成研究

以传统中药材地鳖为原料, 采用匀浆、盐析、硫酸铵分段沉淀、透析和DEAE-52纤维素离子层析等纯化方法, 从其体内分离纯化得到一种纤溶活性蛋白(Fibrinolyric protein of Eupolyphaga sinensis Walker, EFP), 采用SDS-PAGE电泳法对该蛋白进行了分子量和纯度测定, 结果表明, 从地鳖中提取纯化的EFP为相对分子量为41300的单一成分, 具有明显的纤溶活性, 由蛋白质和糖的红外光谱特征吸收峰可推断EFP为一种糖蛋白. EFP对鸡胚尿囊膜新生血管生成有良好的抑制作用, 比阳性对照组(地塞米松组)对鸡胚生长发育影响要小. 地鳖虫纤溶活性蛋白组分具有抑制血管生成的作用, 有可能用于肿瘤治疗.     

M Spectra of Elements 39 ≤ Z ≤ 56 Measured with an Ultra-Thin Window Si(Li) Detector

 Elements in the range 39 ≤ Z ≤ 56 were excited by electrons of an energy between 3 and 15 keV. The X-rays were detected by means of an energy dispersive Si(Li) spectrometer with an ultra-thin polymer entrance window. In all cases M_ζ = M₅N₃ was found to be the most intense M line. Thus, the relative intensity of this line is by definition 100%. For the heavier of the investigated elements some other M lines were observed: M₅O₃, M_γ and M₂N₄. M_γ was detectable for Z ≥ 47, starting with a relative intensity of about 5%, which increased rapidly with Z to approximately 10%. M₅O₃ was first observed for 49-In, with a relative intensity of less than 10%, which increased up to approximately 50% for 56-Ba. Also, M₂N₄ was observed for Z ≥ 49. The relative intensity of that line is approximately one half of that of M_γ.     

Fourier Transform Infrared Spectroscopy Applied to the Characterisation of 17th–20th Century Calcographic and Xylographic Inks

 The aim of this paper is to optimize the analytical method for the characterisation of 17th–20th century calcographic and xylographic inks. It is very important to use not only non destructive techniques, but also analytical instruments that require a minimal amount of material so as to analyze unique or valuable samples, and simultaneously to obtain as much information as possible about their composition. This study compares different ways of sample preparation for further analysis by Fourier transform infrared spectroscopy. It has been possible to analyze the most important absorptions that appear in the spectra and therefore to associate them with the compounds contained in inks. Some of the compounds identified are: hydroxyapatite (calcium phosphate), Prussian blue (ferric ferrocyanide), linseed oil, carbonates, nitrates and sulfates. Received January 10, 1999. Revision March 17, 1999.     

Analysis of Laser Irradiated Organo-Platinum Films

 A study of the surface electronic configuration and surface morphology of excimer laser irradiated organo-platinum films [cis-dichlorobis(triphenylphosphine)platinum(II)] is presented. The films were deposited by thermal evaporation to a thickness of approximately 1 μm. The organo-platinum films were irradiated in air with 248 nm UV light in order to produce metallic deposits. The irradiation source used was a krypton fluoride excimer laser with a pulse length of approximately 20 ns. After irradiation, the surface morphology of the films was studied by atomic force microscopy, which yielded information concerning the effect of exposure dose on the surface roughness. The composition of the deposits was investigated using X-ray photoelectron and Fourier-transform infrared spectroscopy. The effect of annealing the deposits has also been studied. XPS analysis of the annealed samples has provided evidence for the formation of platinum silicide (PtSi).     

Two-Phase Aqueous Extraction of Chromium and its Application to Speciation Analysis of Chromium in Plasma

 This work proposes a new extraction method for chromium based on the two-phase aqueous system isopropyl alcohol-ammonium sulfate-ammonium thiocyanate (i-PrOH-(NH₄)₂SO₄-NH₄SCN), and the related experimental conditions are optimized. The results show that chromium (III) can be quantitatively extracted under the selected conditions: 4 mL of i-PrOH, 200 μL of 2 mol/L sulfuric acid, 1 mL of 4 mol/L NH₄SCN and 3 mL of saturated (NH₄)₂SO₄ solution (V_total=10 mL). Application of the proposed method to speciation analysis of plasma chromium was also investigated and satisfactory results were obtained. Received May 22, 1999. Revision November 8, 1999.     

Adsorption of trisilylamine on the Si(100) surface

Adsorption of trisilylamine (TSA) on the Si(100) surface has been studied using temperature programmed desorption (TPD) and time‐of‐flight electron stimulated desorption (TOFESD). TPD spectra exhibit the presence of three desorption states denoted by β₁, β₂, and β₃ associated with the presence of a mono‐, di‐, and tri‐hydride state respectively. This behavior is identical with previously observed desorption studies resulting from atomic hydrogen adsorption, indicating that the nitrogen species in the adsorbate has minimal impact on the surface structure of the hydride. Preliminary electron irradiation studies are reported and indicate that the formation of a thin silicon nitride layer is induced as a result of the irradiation. Copyright © 2008 John Wiley & Sons, Ltd.     

Carbon Species and Precise Elemental Analysis of Precursors for Superconducting (Bi,Pb)2Sr2Ca2Cu3Ox Tapes

 The chemical composition of BiPbSrCaCuO precursors prepared by different syntheses has to be checked analytically before further application to production of superconducting (Bi,Pb)₂Sr₂Ca₂Cu₃O_x tapes. Carbon species in concentrations below 0,1%(w/w) were observed to be possibly a source of gas evolving reactions during the heat treatment procedures for the superconducting phase formation. A method that allows the temperature controlled detection of CO₂ resulting from reactions of various carbon species was developed based on an commercial C/H₂O-analyser with IR gas detectors. By means of this method it is possible to relate the carbon content to the conditions of synthesis and technological steps of the tape production. The phase formation mechanism of the superconducting (Bi,Pb)2223 phase from a multiphase precursor strongly depends on its elemental composition. Titrimetric and ICP spectrometric methods that allow the determination of the content of the main components Bi, Pb, Ca, Sr, and Cu with high precision and accuracy were developed and their results were compared. The best results were obtained with a combined chemical-spectrometric procedure. The relative standard deviations (RSD) for all metallic elements do not exceed 1%. The analytical results of the main components and specific trace determinations are essential for the functioning of superconducting tapes.     

Spectroscopic Study of the Conformation of 2-Anilino-2-ethoxy-3-oxothiobutyric Acid Anilides

Summary.  An NMR study of the equilibriummixture of two conformers of 2-anilino-2-ethoxy-3-oxothiobutyric acid anilides 3 allows to estimate their population ratio in solvents of increasing polarity. X-Ray analysis as well as IR spectroscopy confirmed that the conformer present in the solid state is stabilized by two hydrogen bonds. The structural basis of the second conformer observed in solution is the 1,4-type S⋯O interaction between the sulfur of the thioanilide moiety and the oxygen of the ethoxy group with a distance of 2.878 ?. Received May 29, 2000. Accepted (revised) July 14, 2000     

Potentiometric Determination of Menadione (Vitamin K3)

 The construction and electrochemical response characteristics of poly(vinyl) chloride matrix membrane sensors for menadione (vitamin K₃) are described. Membranes incorporating the ion association complexes of menadione anion with bathophenanthroline nickel(II) and iron(II) as electroactive materials show linear response for menadione over the range 10⁻¹–10⁻⁵ M with anionic slopes of 58.2–51.4 mV per concentration decade. Both sensors exhibit fast response time (20–30 s), low detection limit (2 × 10⁻⁵ M), good stability (4–6 weeks) and selectivity coefficient (10⁻¹–10⁻³). Direct potentiometric determination of menadione under static and hydrodynamic mode of operations shows average accuracies of 98.8 and 98.5% with relative standard deviations of 0.6% and 1.3%, respectively. Application of the method for the determination of menadione in human plasma gives favourable results compared with those obtained by the standard spectrophotometric method. Received February 26, 2001. Revision October 1, 2001.     

Applications of Electron Microbeam Analysis in the Earth Sciences

 Naturally formed geological materials are not constrained in the number of elements which may be present and a wide range of concentrations can be expected. Oxides are a frequent component and water may be present. The particular problems posed for quantitative analysis in some representative applications are described and solutions suggested. Critical testing of the results for consistency with mineral formulae and for repeatability provides confidence in those results. Examples of applications of quantitative analysis of minerals are used to show the variety of problems encountered in electron microbeam analysis and how the analytical results can be used to determine the conditions (time, pressure, temperature) of the minerals or the rocks in which they occur.     

Determination of Nitrite by a Modified Electrode of Poly(1-Naphthylamine) Film Doped with Dawson-Type Heteropolyanions

 The voltammetric behavior of the electrode modified with poly(1-naphthylamine) film doped with α-P₂W₁₈ heteropolyanions was investigated. The concentration of the modifier, the acidity of the medium and the scan range of potential had obvious effects on the electrochemical characteristics of the electrode. The electrocatalytical characteristics of the film electrode were studied by cyclic voltammetry and other methods. It is suggested that the electrocatalytic reaction of nitrite is controlled by its diffusion. The applicability of the electrode was assessed by the determination of nitrite in waste-water. Determination limit for nitrite was 5 × 10⁻⁷ mol.L⁻¹. Received August 23, 1999. Revision January 2, 2001     

The Photophysics of Thin Polymer Films of Poly-(meta-phenylene-co-2,5-dioctoxy-para-phenylenevinylene)

Summary.  We have investigated the effect of film preparation procedures on the photoluminescence efficiency of the luminescent co-polymer poly-(m-phenylene-co-2,5-dioctoxy-p-phenylenevinylene) (PmPV). The photoluminescence efficiency of PmPV films improved by up to 50% when the solution was degassed by bubbling argon gas through it prior to spin casting in an inert atmosphere and baking under vacuum. Photoinduced absorption and doping measurements show that this preparation method reduces polaron photogeneration, which reduces the photoluminescence (PL) yield through exciton quenching and excited state absorption. It is proposed that this sample preparation method increases interchain separation, reducing the formation of polarons and non-radiative quenching routes, thus resulting in increased PL efficiency. Received June 23, 2000. Accepted (revised) August 3, 2000