Synthesis, electronic, and electro-optical properties of emissive solvatochromic phenothiazinyl merocyanine dyes

Phenothiazinyl merocyanine dyes with variable substitution patterns on the peripheral benzene ring were synthesized in good yields by Knoevenagel condensation of the corresponding phenothiazinyl aldehydes and N-methylrhodanine or indan-1,3-dione. The electronic properties were investigated by cyclic voltammetry, absorption, electro-optical absorption, and emission spectroscopy. All these merocyanines reveal reversible redox behavior that stems from the phenothiazinyl-centered oxidation to give stable radical cations. The redox potentials strongly correlate with Hammett σ(p) parameters. All merocyanines reveal large Stokes shifts. They also display a pronounced emissive solvatochromism, which is caused by large dipole moment changes upon excitation from the ground to the excited state. These findings are supported by solvatochromism studies and time-dependent DFT computations.     

Ferrocenyl oligophenothiazines as organic-organometallic hybrid electrophores - Synthesis, structure, and electronic properties

Oligomeric ferrocene-phenothiazine systems, a novel class of organometallic-organic hybrid electrophores, are easily accessible by Suzuki coupling of iodo ferrocenes and phenothiazinyl and diphenothiazinyl pinacolyl boronates. The triad and the pentad with 1,1′-disubstitution on ferrocene adopt preferentially an eclipsed orientation as a consequence of partial intramolecular π-stacking. In cyclic voltammetry the central ferrocenyl unit acts as an electronic communicator between phenothiazinyl side chains.     

Synthesis and characterization of monodisperse oligofluorenes

An efficient synthesis of 9,9-bis(2-ethylhexyl)fluorene oligomers up to the heptamer is reported, with repetitive Suzuki and Yamamoto coupling reactions employed in the synthesis. The key steps for preparation of the essential intermediates include Pd-catalyzed transformation of aryl bromides to aryl boronic esters (Miyaura reaction) and the application of the much higher reactivity of aryl boronic esters over aryl bromides in the Pd-catalyzed cross-coupling reaction with aryl diazonium salts. Variation of the UV/Vis absorption and photoluminescence characteristics with chain length is reported. Moreover, glass transition and liquid-crystal characteristics of the oligomers are described and compared with those of the polymer.     

Synthesis and reaction of secondary and primary diorganozinc reagents using a boron–zinc exchange reaction: A useful method for the stereo- and regioselective formation of new carbon---carbon bonds

Applications of the boron–zinc exchange reaction to make new carbon---carbon bonds are reviewed. Functionalized chiral secondary alkylzinc reagents can be prepared by this exchange reaction and allows to perform formal enantioselective Michael-additions with umpolung of reactivity. The scope of substrate controlled diastereoselective hydroborations can be considerably enhanced by this methodology. A chemoselective approach to difunctionalized arylsilanes is also described.     

烷硫基四硫富瓦烯的合成及其性质的研究

分别以 1 ,3,4 ,6-四硫代戊搭烯 -2 ,5-二酮和 4 ,5-二 ( 2′-氰基乙硫基 ) -1 ,3-二硫杂环戊烯 -2 -酮为原料 ,经偶联、醇解、烃化制得四甲硫基四硫富瓦烯和四乙硫基四硫富瓦烯。对两种方法制得产物的产率存在较大差别提出了合理的解释 ,并讨论了 2种四硫富瓦烯衍生物的循环伏安图及有关电化学性质。     

Insertion, reduction, and carbon-carbon coupling induced by monomeric aluminum hydride compounds bearing substituted pyrrolyl ligands

A monomeric aluminum hydride complex bearing substituted pyrrolyl ligands, AlH[C(4)H(3)N(CH(2)NMe(2))-2](2) (1), was synthesized and structurally characterized. To further confirm the presence of Al--H bonds, the compound AlD[C(4)H(3)N(CH(2)NMe(2))-2](2) ([D]1) was synthesized by reacting LiAlD(4) with [C(4)H(4)N(CH(2)NMe(2))-2]. Compound 1 and [D]1 react with phenyl isothiocyanate yielding Al[C(4)H(3)N(CH(2)NMe(2))-2](2)[eta(3)-SCHNPh] (2) and Al[C(4)H(3)N(CH(2)NMe(2))-2](2)[eta(3)-SCDNPh] ([D]2) by insertion. The reactions of 1 with 9-fluorenone and benzophenone generated the unusual aluminum alkoxide complexes 3 and 4, respectively, through intramolecular proton abstraction and C-C coupling. A mechanistic study shows that 9-fluorenone coordinates to [D]1 and releases one equivalent of HD followed by C-C coupling and hydride transfer to yield the final product. Reduction of benzil with 1 affords aluminum enediolate complex 5 in moderate yield. Mechanistic studies also showed that the benzil was inserted into the aluminum hydride bond of [D]1 through hydroalumination followed by proton transfer to generate the final product [D]5. All new complexes have been characterized by (1)H and (13)C NMR spectroscopy and X-ray crystallography.     

Synthesis of redox-active biscalix[4]quinones and their electrochemical properties

Biscalix[4]arenes, 7 and 8, have been synthesized by a one-pot coupling method and a stepwise approach, respectively. One-pot reaction in a pressurized vessel resulted in the symmetric biscalix[4]arene 7 in high yield. Oxidation of compounds 7 and 8 by Tl(CO₂CF₃)₃ in CF₃COOH yielded biscalix[4]quinones, 9 and 10, respectively. Preliminary electrochemical studies by cyclic voltammetry of 9 and 10 show significant changes of their voltammograms upon addition of Na⁺.     

Synthesis and optical properties of all-trans-oligodiacetylenes

A new series of pure and highly soluble oligodiacetylenes (ODAs) was synthesized in high yield and on a multi-milligram scale by a sequence of Sonogashira reactions with a strongly reduced level of homocoupling. The lambda(max) and epsilon(max) of these ODAs show an increase with both chain elongation and solvent polarity. A plot of lambda(max) absorption versus 1/CL (CL=conjugation length) was shown to be linear. The lambda(max) converges to 435 nm for the longest members of the series at micromolar concentration. This reveals that the longest wavelength absorption observed for PDA chains (lambda(max) up to 700 nm) is due to aggregation effects. The fluorescence quantum yield increased from monomer to trimer and decreased for longer ODAs. A similar trend is found for the lifetime of fluorescence with a maximum of 600 ps for the trimer. The observed linearity of the rotational correlation time with the oligomer length implies that the ODA chains in solution lack significant geometrical changes. This implies that the ODAs in solution are fully stretched molecular rods of up to 4 nm in length.     

Scope and mechanism of the Pd(II)-catalyzed arylation/carboalkoxylation of unactivated olefins with indoles

Treatment of 1-methyl-2-(4-pentenyl)indole (5) with a catalytic amount of [PdCl2(MeCN)2] (2; 5 mol %) and a stoichiometric amount of CuCl2 (3 equiv) in methanol under CO (1 atm) at room temperature for 30 min gives methyl (9-methyl-2,3,4,9-tetrahydro-4-carbazolyl)acetate (6), which was isolated in 83% yield. A number of 2- and 3-alkenyl indoles undergo a similar palladium-catalyzed cyclization/carboalkoxylation to give the corresponding polycyclic indole derivatives in moderate to excellent yields with excellent regio- and diastereoselectivity. Under similar conditions, vinyl arenes undergo intermolecular arylation/carboalkoxylation with indoles to give 3-(1-aryl-2-carbomethoxyethyl) indoles in moderate yield with high regioselectivity. Stereochemical analyses of the palladium-catalyzed cyclization/carboalkoxylation of both 2- and 3-alkenyl indoles are in agreement with mechanisms involving outer-sphere attack of the indole on a palladium-olefin complex followed by alpha-migratory insertion of CO and methanolysis of the resulting acyl palladium intermediate. CuCl2 functions as the terminal oxidant in this palladium-catalyzed cyclization/carboalkoxylation of alkenyl indoles and also significantly increases the rate of reaction of 2 with the alkenyl indole to form the corresponding acyl palladium complex. Spectroscopic studies are in agreement with the intermediacy of a heterobimetallic Pd/Cu complex as the active catalyst in this reaction.     

Rationally designed pincer-type heck catalysts bearing aminophosphine substituents: Pd IV intermediates and palladium nanoparticles

The aminophosphine-based pincer complexes [C6H3-2,6-(XP(piperidinyl)2)2Pd(Cl)] (X=NH 1; X=O 2) are readily prepared from cheap starting materials by sequential addition of 1,1',1'-phosphinetriyltripiperidine and 1,3-diaminobenzene or resorcinol to solutions of [Pd(cod)(Cl)2] (cod=cyclooctadiene) in toluene under N2 in "one pot". Compounds 1 and 2 proved to be excellent Heck catalysts and allow the quantitative coupling of several electronically deactivated and sterically hindered aryl bromides with various olefins as coupling partners at 140 degrees C within very short reaction times and low catalyst loadings. Increased reaction temperatures also enable the efficient coupling of olefins with electronically deactivated and sterically hindered aryl chlorides in the presence of only 0.01 mol % of catalyst. The mechanistic studies performed rule out that homogeneous Pd 0 complexes are the catalytically active forms of 1 and 2. On the other hand, the involvement of palladium nanoparticles in the catalytic cycle received strong experimental support. Even though pincer-type Pd IV intermediates derived from 1 (and 2) are not involved in the catalytic cycle of the Heck reaction, their general existence as reactive intermediates (for example, in other reactions) cannot be excluded. On the contrary, they were shown to be thermally accessible. Compounds 1 and 2 show a smooth halide exchange with bromobenzene to yield their bromo derivatives in DMF at 100 degrees C. Experimental observations revealed that the halide exchange most probably proceeded via pincer-type Pd IV intermediates. DFT calculations support this hypothesis and indicated that aminophosphine-based pincer-type Pd IV intermediates are generally to be considered as reactive intermediates in reactions with aryl halides performed at elevated temperatures.     

Synthesis of polyamines with pendant cyanoimidazole units and their electrochemical properties

The 2-(1-methyl-4,5-dicyanoimidazolyl) group was attached to poly(diallylamine) and polyethylenimine, affording polymers containing an electron-withdrawing pendant group. The key to their preparation is high reactivity of 1-methyl-2-fluoro-4,5-dicyanoimidazole (1) toward nucleophilic aromatic substitution (NAS) reactions with aliphatic amines. Cyclic voltammograms of these polymers show reduction waves at −2.6 to −2.7 V vs. Ag/Ag⁺ but no reoxidation waves, unlike those of monomeric and oligomeric model compounds, which are quasi-reversible. The cyclic voltammetry studies of oligomeric model compounds with different alkyl spacers show that the degree of quasi-reversibility decreases as dicyanoimidazoles are crowded together in a molecule, suggesting that a certain degree of chemical reaction occurs between reduced dicyanoimidazole groups. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2619–2629, 1998     

Continuous Synthesis of Peralkylated Imidazoles and their Transformation into Ionic Liquids with Improved (Electro)Chemical Stabilities

A versatile and efficient method to synthesize tetrasubstituted imidazoles via a one‐pot modified Debus–Radziszewski reaction and their subsequent transformation into the corresponding imidazolium ionic liquids is reported. The tetrasubstituted imidazoles were also synthesized by means of a continuous flow process. This straightforward synthetic procedure allows for a fast and selective synthesis of tetrasubstituted imidazoles on a large scale. The completely substituted imidazolium dicyanamide and bis(trifluoromethylsulfonyl)imide salts were obtained via a metathesis reaction of the imidazolium iodide salts. The melting points and viscosities are of the same order of magnitude as for their non‐substituted analogues. In addition to the superior chemical stability of these novel ionic liquids, which allows them to be applied in strong alkaline media, the improved thermal and electrochemical stabilities of these compounds compared with conventional imidazolium ionic liquids is also demonstrated by thermogravimetrical analysis (TGA) and cyclic voltammetry (CV). Although increased substitution of the ionic liquids does not further increase thermal stability, a definite increase in cathodic stability is observable.     

Efficient domino process based on the catalytic generation of non-metalated,conjugated acetylides in the presence of aldehydes or activated ketones

The extremely mild and highly efficient catalytic generation of non-metalated, conjugated acetylides is reported. These acetylides are used to generate enol-protected functionalized propargylic alcohols 1, 1,3-dioxolane compounds 2, or 3,4,5-trisubstituted 4,5-dihydrofurans 4 through serial multibond-forming processes. The method calls for a nucleophile (a tertiary amine or phosphine) as a chemical activator, a conjugated terminal acetylene as the acetylide source, and an aldehyde or activated ketone as the electrophilic partner. The chemical outcome of this process depends on the nature of the nucleophile, the temperature, stoichiometry and solvent, and it can be tailored selectively by the appropriate choice of the experimental conditions.     

Homogeneous catalysts supported on soluble polymers: biphasic Sonogashira coupling of aryl halides and acetylenes using MeOPEG-bound phosphine-palladium catalysts for efficient catalyst recycling

The Sonogashira coupling of various aryl bromides and iodides with different acetylenes was studied under biphasic conditions with soluble, polymer-modified catalysts to allow the efficient recycling of the homogeneous catalyst. For this purpose, several sterically demanding and electron-rich phosphines of the type R(P)PR(2) were synthesised. They are covalently linked to a monomethyl polyethylene glycol ether with a mass of 2000 Dalton (R(P)=MeOPEG(2000)) R(P)PR(2): -PR(2)= -CH(2)C(6)H(4)CH(2)P(1-Ad)(2), -C(6)H(4)-P(1-Ad)(2), -C(6)H(4)-PPh(2). To couple aryl iodides and acetylenes, the catalyst [(MeCN)(2)PdCl(2)]/2 R(P)-C(6)H(4)-PPh(2) was used in CH(3)CN/Et(3)N/n-heptane (5/2/5). The combined yields of coupling product over five reaction cycles are between 80-95 percent. There is no apparent leaching of the catalyst into n-heptane, as evidenced by (1)H NMR spectroscopy. The new catalyst [(MeCN)(2)PdCl(2)]/2 (1-Ad)(2)PBn can be used for room-temperature coupling of various aryl bromides and acetylenes in THF with HNiPr(2) as a base. A closely related catalyst Na(2)[PdCl(4)]/2 R(P)-CH(2)C(6)H(4)CH(2)P(1-Ad)(2) linked to the polymer was used to couple aryl bromides and acetylenes in DMSO or DMSO/n-heptane at 60 degrees C with 0.5 mol percent Na(2)[PdCl(4)], 1 mol percent R(P)PR(2) and 0.33 mol percent CuI. The combined yield of coupling products over five cycles is always greater than 90 percent, except for sterically hindered aryl bromides. The determination of the turnover frequency (TOF) of the catalyst indicates only a small decrease in activity over five cycles. Leaching of the catalyst into the product containing n-heptane solution could not be detected by means of (1)H NMR and TXRF; this is indicative of >99.995 percent catalyst retention in the DMSO solvent.     

Solid-phase synthesis of tetrahydro-beta-carbolines and tetrahydroisoquinolines by stereoselective intramolecular N-carbamyliminium Pictet-Spengler reactions

A solid-phase method for the synthesis of tri-, tetra-, and pentacyclic compounds containing tetrahydro-beta-carboline, tetrahydroisoquinoline or analogous scaffolds is presented. The reaction proceeds with high stereoselectivity through an intermediate N-carbamyliminium ion that exclusively converts into Pictet-Spengler-type products with a variety of C-nucleophiles. Amino aldehydes masked with 3-Boc-(1,3)-oxazinane (Box) have been synthesized from amino acids, amino alcohols, or 2-nitro benzaldehydes. The amino moiety of these masked aldehydes has been converted into pentafluorophenyl carbamate to serve as a urea precursor. The building blocks were incorporated at the N-terminal of a resin-supported dipeptide through urea formation. Subsequent treatment with acid liberated the aldehyde quantitatively. A penultimate tryptophan residue gave rise, under the acetic conditions, to a spontaneous intramolecular Pictet-Spengler reaction with the liberated aldehyde. The reaction proceeded with a high degree of stereoselectivity affording tetrahydro-beta-carbolines with a de (de=diastereomeric excess) above 95 % and purity in the range of 90-99 %. This reaction has been extended to a range of other aromatic C-nucleophiles, including substituted indoles, benzenes, pyrene, furan, thiophenes, and benzothiophene with comparable stereoselectivity and purity. Prolonged exposure of the benzaldehyde-derived Pictet-Spengler products to strong acid and air lead to quantitative auto-oxidation which yielded compounds with a 3,4-dihydro-beta-carboline, a 3,4-dihydroisoquinoline, or a similar core structure.