Organic cross-linked electropolymers as supported oxidation catalysts: poly((tetrakis(9,9'-spirobifluorenyl)porphyrin)manganese) films

Anodic oxidation of free base and manganese complexes of tetraspirobifluorenylporphyrins leads to the coating of the working electrode by insoluble electroactive poly(9,9'-spirobifluorene-free and manganese porphyrin) films which electrochemical behavior and physicochemical properties are described. After removal from the electrode, the manganese-complexed polymers were evaluated as catalysts for the oxidation of alkenes by iodobenzene diacetate or iodosylbenzene. The results show that the reactions proceeded very efficiently at room temperature with good yields. The electrosynthesized polymer catalysts can be recycled by simple filtration and reused even up to the eighth cycle without loss of activity and selectivity. These results represent an important improvement over those previously described for manganese-porphyrin-catalyzed epoxidation reactions.     

Zeolite-Y enslaved manganese(III) complexes as heterogeneous catalysts

Traditional catalytic procedures for oxidation of phenol produce environmentally undesirable wastes. As a consequence, there is a clear demand for development of an environmentally benign catalytic route for the selective oxidation of phenol. A series of zeolite-Y enslaved Mn(III) complexes with Schiff bases derived from vanillin furoic-2-carboxylic acid hydrazone (VFCH), vanillin thiophene-2-carboxylic acid hydrazone (VTCH), ethylvanillin thiophene-2-carboxylic acid hydrazone (EVTCH), and/or ethylvanillin furoic-2-carboxylic acid hydrazone have been synthesized and characterized by physico-chemical techniques. Catalytic oxidations of phenol using 30% H₂O₂ as an oxidant over [Mn(VTCH)₂·2H₂O]⁺-Y, [Mn(VFCH)₂·2H₂O]⁺-Y, and [Mn(EVTCH)₂·2H₂O]⁺-Y under mild conditions were studied. These zeolite-Y enslaved Mn(III) complexes are stable and recyclable under current reaction conditions.     

Organo-Laponites as novel mesoporous supports for manganese(III) salen catalysts

A Mn(III) salen complex was immobilized onto the Laponite surface using three different methodologies: method A, direct immobilization of the complex on the parent Laponite; method B, covalent anchoring through cyanuric chloride (CC); and method C, covalent anchoring through CC into a 3-aminopropyl)triethoxysilane (APTES) modified Laponite. All of the materials were characterized by FTIR, XPS, thermogravimetry, XRD, and nitrogen isotherms at 77 K, to gather information on the modifications introduced by the organo spacers within the Laponite surface, as well as on the anchored complex integrity; the Mn based materials were screened in the heterogeneous epoxidation of styrene. The results have shown that the immobilization of the manganese(III) salen complex by methods B and C have occurred at the edges of the clay particles through the spacers (APTES and CC) that have been anchored onto the Si-OH groups, whereas in method A, the complex is distributed throughout the clay surface, including the interlayer region. Therefore, the manganese loadings on the Laponites were as follows: materials prepared by method A > method B > method C. All of the heterogeneous catalysts showed high styrene epoxide selectivity, with that prepared by method A showing comparable styrene epoxide selectivity as the homogeneous phase reaction. The styrene epoxide yields decrease in the following order: materials prepared by method A > method B > method C (1st cycles), which parallel the respective support catalytic activity and decreasing of manganese content. The heterogeneous catalysts prepared using methods B and C could be reused at least for four times, with the former exhibiting the most stable catalytic activity, but that prepared by method A showed a significant decrease after two catalytic cycles.     

Low-temperature magnetisation study on manganese(III) porphyrins

Average magnetisation between 2 and 20 K and 10 and 50 kOe of two typical high-spin manganese(III) porphyrins, namely TPPMnCI and TPPMnCl(py), is reported for the first time. The results have been analysed in terms of spin hamiltonian formalism including both the crystal field and magnetic exchange.     

Nanoparticle supported bis (cyclopentadienyl) zirconium dichloride catalysts for styrene polymerization

Heterogeneous nanoparticle NA-MgO-MAO/NA-TiO₂ (anatase)-MAO supported bis (cyclopentadienyl) zirconium dichloride (Cp₂ZrCl₂) are synthesized and used for the polymerization of styrene monomer. The supporting process is confirmed via X-ray photoelectron spectroscopy (XPS) and FTIR. Characterization of the obtained polymer is done by gel permeation chromatography (GPC), ¹³C NMR spectroscopy and differential scanning calorimetry (DSC).     

Some novel manganese(III) porphyrins with catalytic properties

Abstract

A series of manganese(III) porphyrins with 4-methylimidazole have been prepared. These are high-spin complexes having general formula [Mn^III(THMPP)X(4-MeIm)], where THMP?=?5,10,15,20-tetra(4-hydroxy-3-methoxyphenyl)porphine ligand, X?=?Cl^?, Br^?, NCS^?, or N₃^? and 4-MeIm?=?4-methylimidazole. All the complexes have been characterized by UV-visible, FT-IR, ESI-MS spectra, elemental analyses and magnetic susceptibility measurements. These manganese(III) porphyrins oxidize aromatic alcohols to aldehydes. The oxidation reactions have been carried out at room temperature in the presence of oxidants such as NaIO₄, H₂O₂, and NaOCl. The comparative studies proved that NaIO₄ behaves as the most efficient oxidant in these oxidative transformation reactions.     

Allylic amination of alkenes by tosyliminoiodobenzene: manganese porphyrins as suitable catalysts

Manganese-porphyrins and particularly Mn(TPP)(ClO₄) were found to be much better catalysts than iron-porphyrins for allylic N-tosylamination of alkenes by tosyliminoiodobenzene. With the former catalysts, cyclohexene was selectively transformed into 3-tosylaminocyclohexene with yields up to 70% and cis- and trans-hex-2-ene into allylic N-tosylamines with yields around 40%, whereas cyclooctene led to the corresponding allylic and homoallylic N-tosylamines.     

Magnetic properties and electronic structure of manganese(III) porphyrins

The average magnetic susceptibility (1.2-100 K) and magnetisation (100–15000 Oe at 4.2 K) of two perchlorato manganese(III) porphyrins establish them to be high-spin, in contrast to the “anomalous” behaviour of analogous iron(III) porphyrins. An explanation of the origin of the zero-field splitting in high-spin manganese(III) porphyrins is presented.     

An iron(III) phosphonate cluster containing a nonanuclear ring

This communication reports the first example of cyclic ferric clusters with an odd number of iron atoms capped by phosphonate ligands, namely, [Fe9(mu-OH)(7)(mu-O)2(O3PC6H9)8(py)12]. The magnetic studies support a S = 1/2 ground state with an exchange coupling constant of about J approximately equal to -30 K.     

Epoxidation of styrene catalyzed by manganese (III) porphyrins supported on chloromethylated polystyrene resin bearing crown ether groups,

Metalloporphyrins and crown ether groups were simultaneously supported on chloromethylated polystyrene resin to produce a series of polymer-supported catalysts. The synthesis of these catalysts has been studied. The influence of pH, concentrations of NaOCl and phase transfer catalysts on the epoxidation of styrene catalyzed by these catalysts has also been investigated. The experimental results show that manganese(III) porphyrin bound to chloromethylated polystyrene which bears crown ether groups is effective catalysts for the epoxidation of styrene by sodium hypochlorite. The introduction of crown ether groups increases the catalytic efficiency of supported metalloporphyrins. The kinetics of epoxidation catalyzed by supported manganese(III) porphyrins obeys Michaelis-Menten equation—the characteristic of enzyme-driven reaction.     

Synthesis of new macrocyclic chiral manganese(III) Schiff bases as catalysts for asymmetric epoxidation

We describe a general synthetic strategy for the preparation of a series of macrocyclic chiral manganese(III) salen complexes. The developed reaction pathway allows the modulation of the different key groups, namely, the chiral diimine, the bulky substituents in positions 3 and 3', and the linker used in the macrocyclization of the Schiff base. The different complexes presented here illustrate these readily available structural variations. The catalytic properties of the catalysts (5 mol %) were improved for the asymmetric epoxidation of 2,2'-dimethylchromene with NaOCl or H2O2 as oxygen atom donor. A large range of enantiomeric excesses was obtained (ee values from 30% to 96%), depending on the features and the stability of the complexes. The most efficient catalyst, in terms of stereoinduction (ee value = 96%), contains a diiminocyclohexyl moiety, ethyl groups in positions 3 and 3', and a short polyether junction arm.     

Multi-wall carbon nanotube supported manganese(III)tetraphenylporphyrin: efficient catalysts for epoxidation of alkenes with NaIO4 under various reaction conditions

Manganese(III)tetraphenylporphyrin supported on multi-wall carbon nanotubes (MWCNTs) were developed as efficient catalysts for epoxidation of alkenes with sodium periodate under mild conditions. The catalysts were prepared by axial ligation of manganese to 2-aminobenzimidazole and 2-aminothiazole preanchored to MWCNTs. The formation of these heterogenized catalysts was followed using elemental analysis, FT-IR spectroscopy, diffuse reflectance UV-Vis spectrophotometry, and scanning electron microscopy. The reactivity of these catalysts under both magnetic stirring and ultrasonic irradiation and also their reusability were investigated.     

The linear dichroism spectra of free base and manganese(III) porphyrins

Linear dichroism of tetraphenylporphyrin and mesoporphyrin IX dimethyl ester are reported together with their manganese (III) derivatives, using both stretched polythene films and liquid crystals as the orienting solvents. All observed electronic transitions in the range 350–900 nm are found to be polarised in the plane of the porphyrin ring.     

Aluminium(III) porphyrins as supramolecular building blocks

Aluminium(III) porphyrin-carboxylate complexes, including a porphyrin pentamer, have been characterised by NMR spectroscopy, MALDI spectrometry and single crystal X-ray diffraction; these complexes can also be coordinated by a sixth, nitrogenous, ligand to the aluminium(III) centre.     

Studies on iron(III) and manganese(III) derivatives of new meso-aryl substituted and brominated porphyrins

A series of Fe^III and Mn^III porphyrins with various tolyl and naphthyl substituents at the meso positions, and their perbromoderivatives with Br substituents at the -pyrrole positions, have been synthesised and investigated. As seen in the case of the free-base porphyrins, both Fe^III and Mn^III derivatives of the Br-substituted porphyrins also exhibit pronounced red-shifts in both B and Q bands compared to their nonbrominated analogues. This is attributed to the electron-withdrawing ability of eight Br substituents at -pyrrole positions and is also due to distortion brought about in the -framework by the bulky substituents including those at the meso positions. The naphthyl groups seem to be making mesomeric contributions for both nonbrominated and brominated porphyrins of these metal ions as is evident from the higher wavelength absorption of the B band as compared to the tolyl derivatives. While the meso-substituent do not exhibit any isomer dependent change on the electronic properties of Fe^III porphyrins, they show a noticeable effect in the Mn^III derivatives. During the metallation of meso-tetratolylporphyrins by Fe^III ions -oxo dimeric compounds are formed, while the naphthyl porphyrins and the bromoderivatives do not form such dimeric species. The presence of bulky groups at the meso positions and heavy bromines on the -pyrrole positions can be considered to prevent the formation of catalytically inert -oxo dimers.     

Comparison of properties of supported organozirconium catalysts containing zirconium ions in different valence states

A comparison of the properties of supported zirconium catalysts containing zirconium ions in different valence states in ethylene polymerization shows that an increase in the proportion of active centers involving Zr(III) ions results in a decreasing molecular weight of the polymer. The catalyst activity is practically unchanged.

---

, , . , , Zr(III) . .

     

A practical innovative method for highly selective oxidation of alkenes and alkanes using Fe (III) and Mn (III) porphyrins supported onto multi‐wall carbon nanotubes as reusable heterogeneous catalysts

Functionalized multi‐walled carbon nanotubes were used for covalent immobilization of meso‐tetrakis(4‐carboxyphenyl) porphyrinatoiron (III) chloride [Fe (TCPP)Cl] and meso‐tetrakis(4‐carboxyphenyl) porphyrinatomanganese (III) acetate [Mn (TCPP)OAc]. The full characterization of the hybrid porphyrinic nanomaterials, by Fourier transform‐infrared and UV–Vis spectroscopy, transmission electron microscopy, thermogravimetry and flame atomic absorption spectrometry is described. The oxidation of alkenes and alkanes with molecular oxygen as green oxidant in the presence of Mn‐ and Fe‐catalysts has been studied in a comparative manner. The Fe‐catalyst was shown to have higher catalytic activity compared with the Mn‐catalyst. In addition, both separable solid catalysts can be recovered and reused at least 10 times along with good yields.     

Oxidation of alcohols with sodium periodate catalyzed by supported Mn(III) porphyrins

The mild and efficient oxidation of alcohols with sodium periodate catalyzed by manganese(III) tetrakis(p-sulfonatophenylporphyrinato) acetate, [Mn(TPPS)], supported on polyvinylpyridine, [Mn(TPPS)-PVP], and Amberlite IRA-400, [Mn (TPPS)-Ad IRA-400], at room temperature is reported. The catalysts used in this study showed high activity not only in the oxidation of benzylic and linear alcohols but also in the oxidation of secondary alcohols at room temperature. These catalysts can be reused several times without significant loss of their activity.     

Organosoluble zirconium phosphonate nanocomposites and their supported chiral ruthenium catalysts: the first example of homogenization of inorganic-supported catalyst in asymmetric hydrogenation

In this article, we report the synthesis, structure, morphologies, and asymmetric catalytic properties of a series of novel organosoluble zirconium phosphonate nanocomposites and their supported chiral ruthenium catalysts, which have a good organosolubility (0.1-0.5 g mL(-1)) in various solvents and mesoporous, filiform, and layered structures. Due to the organosoluble properties in various organic solvents, the first homogenization of zirconium phosphonate-supported catalyst was realized in the field of catalysis. In the asymmetric hydrogenation of substituted α-ketoesters, enantioselectivities (74.3-84.7% ee) and isolated yields (86.7-93.6%) were higher than the corresponding homogeneous Ru(p-cymene)(S-BINAP)Cl(2) due to the confinement effect caused by the remaining mesopores in the backbone of the zirconium phosphonate. After completing the reaction, the supported catalyst can be readily recovered in quantitative yield by adding cyclohexane and centrifugation, and reused for five consecutive runs without significant loss in catalytic activity.