Perfluoro-4-methyl-1,3-dioxole: a new monomer for high-Tg amorphous fluoropolymers

A 4-Chloro-5-trifluoromethyl-2,2,4-trifluoro-1,3-dioxolane (1) was synthesised by reaction of CF₂(OF)₂ with CF₃CHCFCl; the elimination of HCl from (1) in basic conditions led to the formation of dioxole perfluoro-4-methyl-1,3-dioxole (2). Both these synthetic steps gave the corresponding product in high yield.A new synthetic route for the preparation of CF₃CHCFCl, starting from CF₂ClBr and CH₂CF₂, together with some examples of polymerisation products obtained by reaction of dioxole (2) with fluoroolefins are also reported.     

Fluorinated epoxides: 6. Chemoselectivity in the preparation of 2-[(heptafluoroisopropyl)methyl]oxirane from iodoacetate and iodohydrin precursors

Fluorinated iodoacetate (CF₃)₂CFCH₂CHICH₂OAc (1) (prepared by radical addition of perfluoroisopropyl iodide to allyl acetate) and fluorinated iodohydrin (CF₃)₂CFCH₂CHICH₂OH (2) (prepared from 1) were converted to the corresponding perfluoroalkylated oxirane (CF₃)₂CFCH₂CH(O)CH₂ (3) in the yield of 62%. The chemoselectivity of the oxirane formation appeared to be strongly dependent on the starting compound 1 or 2 and solvent used. Byproducts (CF₃)₂CFCHCHCH₂OH (4) and (CF₃)₂CFCHCHCH₂OAc (5) can form a major part of the products in the formation of epoxide 3.     

The first synthesis and X-ray structures of polyfluorinated 1,2-, 2,3- and 2,4a-dihydro-1,3-diazafluorenes

Acetic acid-catalyzed condensation of 2-amino-3-(1-imino-2,2,2-trifluoroethyl)-1,1,4,5,6,7-hexafluoroindene (1b) with acetone and cyclopentanone gives 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene (2a) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3a) together with small amounts of 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene (2b) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3b), respectively. When acted upon by (CH₃)₂SO₄ compounds 2, 3 were converted into corresponding fluorine-containing 1-methyl-1,2-dihydro-1,3-diazafluorenes 6, 7. 4a-Chloro-5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,4a-dihydro-1,3-diazafluorene (8) has been synthesized by the interaction of compound 2 with SOCl₂. Solution of compound 2 as well as 8 in CF₃SO₃H-CD₂Cl₂ generated 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2,3,4-tetrahydro-1,3-diazafluorene-4-yl cation (2c). The structures of compounds 2, 3, 6-8 have been determined by single crystal X-ray diffraction.     

Synthesis and repellent properties of vinylidene fluoride-containing polyacrylates

Fluorinated polyacrylats with side group containing vinylidene fluoride (VDF) units (CF₃(CF₂)_n (CH₂CF₂)_m, n = 3, 5; m = 1, 2) were successfully synthesized. The water and oil repellency properties of these polymers are similar to those of fluorinated polyacrylate with side group containing long perfluorooctyl group (CF₃(CF₂)₇). The thermal telomerization of CF₃(CF₂)₅I and CF₃(CF₂)₃I with vinylidene fluoride (VDF) provided CF₃(CF₂)₅CH₂CF₂I (1b) and CF₃(CF₂)₃CH₂CF₂CH₂CF₂I (1c), respectively. The addition of 1b with ethylene followed by hydrolysis gave CF₃(CF₂)₅CH₂CF₂CH₂CH₂OH (2b). Treatment of 1c with ethyl vinyl ether in the presence of Na₂S₂O₄ followed by reduction produced CF₃(CF₂)₃CH₂CF₂CH₂CF₂CH₂CH₂OH (2c). Fluoroacrylates 3b-d were prepared by acrylation of the corresponding fluoroalcohols 2b-d. The semi-continuous process emulsion co-polymerization of 3a-d with octadecyl acrylate and 2-hydroxylethyl acrylate initiated by (NH₄)₂S₂O₈ in the presence of a mixture emulsifiers of polyoxyethylene(10)nonyl phenyl ether (TX-10) and sodium lauryl sulfate provided stable latexes 4a-d, respectively. The water and oil repellency properties of 4b (R_f: CF₃(CF₂)₅CH₂CF₂) and 4c (R_f: CF₃(CF₂)₃CH₂CF₂CH₂CF₂) containing vinylidene fluoride (VDF) units were similar to those of 4a (R_f: CF₃(CF₂)₇) containing long perfluoroalkyl group and much better than those of polymer 4d (R_f: CF₃(CF₂)₃) with short perfluoroalkyl chain. Thus, polyacrylates containing vinylidene fluoride units showed promising aspects as the alternatives to the currently used water and oil repellent agents with long perfluoroalkyl chains.     

Greener fluorous chemistry: Convenient preparation of new types of ‘CF3-rich’ secondary alkyl mesylates and their use for the synthesis of azides, amines, imidazoles and imidazolium salts

2,2,2-Trifluoroethanol, 1,1,1,3,3,3-hexafluoro-2-propanol, and nonafluoro-tert-butyl alcohol were used as precursors for the preparation of the appropriate bis(polyfluoroalkoxymethyl)carbinols [(R_FHOCH₂)₂CHOH, 1a-c, R_FH = (a) CF₃CH₂, (b) (CF₃)₂CH, and (c) (CF₃)₃C] and the corresponding mesylates [(R_FHOCH₂)₂CHOSO₂CH₃, 2a-c]. This novel design paradigm is introduced to eliminate the persistence and bioaccumulation problems of fluorous chemistry, which are associated with the use of longer linear perfluoroalkyl groups (e.g. R_fn ≥ n-C₈F₁₇, n-C₇F₁₅). Secondary mesylates 2a,b and the primary tosylate [(CF₃)₃COCH₂CH₂OTs, 2d] displayed acceptable reactivity towards azide and imidazole nucleophiles to allow the syntheses of novel fluorous azides, which on hydrogenolysis with H₂/Pd-C offered fluorous amines [(R_FHOCH₂)₂CHNH₂, 8a,b], and 1-(polyfluoroalkyl)imidazoles (5a,b,d), respectively, while 2c showed no reactivity due to steric hindrance. The reaction of 8a,b with formaline, glyoxal and hydrochloric acid gave symmetrical 1,3-dialkylated imidazolium chlorides (9a,b), while 5a,b,d were effectively alkylated using n-C₈F₁₇(CH₂)₃I, methyl iodide, 2-bromoethanol, and 2d to yield the corresponding 1,3-dialkylimidazolium iodides, bromides, and tosylates (7aa-ec). Some physical properties of new compounds including mp, bp and solubility patterns were also analyzed; and the fluorophilicity values of 1a-c, and 2a-c were experimentally determined by GC and/or ¹⁹F NMR spectroscopy.     

EPR studies on regio-selective H-abstraction by “magic blue” reagent from polymers

The radical reactions of polyolefin and olefin copolymers (4-9), polydienes and diene coplymers (10-15), and polysiloxane (16) with “magic blue” reagent containing H-abstracting agent-bis{perfluoro-1-[1-(2-fluorosulfonyl)ethoxy]ethyl}nitroxide [FSO₂CF₂CF₂OCF(CF₃)]₂N(O) (2)and spin trap-perfluoro-1-nitroso-[1-(2-fluoro-sulfonyl)ethoxy]ethane FSO₂CF₂CF₂OCF(CF₃)NO (3) were studied by EPR detection of the spin adducts of the corresponding polymeric radicals generated in the H-abstraction step to the spin trap 3, namely, the nitroxides FSO₂CF₂CF₂OCF(CF₃)N(O) (polymer-H) 17-29. EPR studies have provided information about the regio-selectivity of H-abstraction, the subsequent radical steps followed H-abstraction and grounded a possibility of employing “magic blue” reagent in polymer modification via H-abstraction-initiated grafting polymerization.     

Lewis acid-promoted reactions of ethenetricarboxylates with γ-CF3-substituted propargyl alcohols

The Lewis acid-promoted reaction of an ethenetricarboxylate derivative (1) with CF₃-substituted propargyl alcohols has been examined. Reaction of γ-CF₃ propargyl alcohols in the presence of zinc bromide gave five-membered CF₃-containing tetrahydrofurans in 66-85% yield. The CF₃ group activates alkyne as an electron-withdrawing group. On the other hand, reaction of γ-trifluoromethyl-α-aryl propargyl alcohols 2 with 1 in the presence of 1 equiv of SnCl₄ gave cyclobutane derivatives 6 in 29-49% yield. Formation of cyclobutane 6a arises from the [2+2] cycloaddition between ethenetricarboxylate 1 and chloroallene 8, which is produced by the reaction of propargyl alcohol 2a and SnCl₄.     

Regio- and stereoselective reactions of a rhodanine derivative with optically active 2-methyl- and 2-phenyloxirane

The reaction of a rhodanine derivative (=(Z)-5-benzylidene-3-phenyl-2-thioxo-1,3-thiazolidin-4-one; 1) with (S)-2-methyloxirane (2) in the presence of SiO₂ in dry CH₂Cl₂ for 10 days led to two diastereoisomeric spirocyclic 1,3-oxathiolanes 3 and 4 with the Me group at C(2) (Scheme 2). The analogous reaction of 1 with (R)-2-phenyloxirane (5) afforded also two diastereoisomeric spirocyclic 1,3-oxathiolanes 6 and 7 bearing the Ph group at C(3) (Scheme 3). The structures of 3, 4, 6, and 7 were confirmed by X-ray crystallography (Figs. 1 and 2). These results show that oxiranes react selectively with the thiocarbonyl group (CS) in 1. Furthermore, the nucleophilic attack of the thiocarbonyl S-atom at the SiO₂-activated oxirane ring proceeds with high regio- and stereoselectivity via an S_N2-type mechanism.     

Synthesis and structural characterisation of gallium and indium fluoroalkoxide ‘ate’ complexes

The treatment of InCl₃ with MOCH(CF₃)₂ (M = Li, Na, K) in a 1:6 stoichiometry, followed by recrystallisation results in the formation of the bimetallic “ate” complexes [Na₃In(OCH(CF₃)₂)₆(THF)₃] (2) and [Li₃In(OCH(CF₃)₂)₆(THF)₃] (5) from hexane, and [K₃In(OCH(CF₃)₂)₆]_n (4) from a THF and toluene mixture. If a 1:3 stoichiometry is used chloride containing compounds [Na₂InCl(OCH(CF₃)₂)₄(THF)₄] (1) and [KInCl₂ (OCH(CF₃)₂)₂(THF)₃]_n · THF (3) are obtained on recrystallisation from hexane. Treatment of GaCl₃ with 6 equivalents of LiOC(CH₃)₂CF₃ gives [LiGa(OC(CH₃)₂CF₃)₄(THF)₂] (6) on recrystallisation from hexane. The protolysis reaction between In(N(SiMe₃)₂)₃, formed in situ from (Me₃Si)₂NH, ⁿBuLi and Incl₃, and HOCH(CH₃)CF₃ results in isolation of [LiIn(OCH(CH₃)CF₃)₃Bu]₂ (7) from hexane. The structures of 2, 4, and 5 all contain the tetranuclear core InO₆M₃. Compounds 1 and 3 have residual chloride; 1 is a trinuclear species with two THF ligands per Na, while 3 is a linear polymer. Compound 6 has a GaO₂Li four-membered parallelogram at its core. Complex 7 has a tetranuclear In₂O₆Li₂ core and an unexpected ⁿBu group on the In atoms. The coordination spheres of the alkali metals in 1-6 include solvated THF while 1-5 display additional close M?F interactions.     

Assembling of 3,6-diazabicyclo[3.1.0]hexane framework in oxidative triflamidation of substituted buta-1,3-dienes

Reaction of trifluoromethanesulfonamide (triflamide) CF₃SO₂NH₂ with 2,3-dimethylbuta-1,3-diene (2) and 2,5-dimethylhexa-2,4-diene (3) in the oxidative system (t-BuOCl+NaI) results in the formation of 2,4-dimethyl- or 2,2,4,4-tetramethyl-3,6-bis(triflyl)diazabicyclo[3.1.0]hexane through two successive heterocyclizations. Reaction of diene (3) with arenesulfonamides ArSO₂NH₂ (Ar=Ph, Tol), stops at the formation of the product of oxidative 1,4-addition, N,N′-(2,3-dimethylbut-2-ene-1,4-diyl)diarenesulfonamides, providing evidence of the essential difference between the reactivity of triflamide and arenesulfonamides.     

Synthesis of redox-active biscalix[4]quinones and their electrochemical properties

Biscalix[4]arenes, 7 and 8, have been synthesized by a one-pot coupling method and a stepwise approach, respectively. One-pot reaction in a pressurized vessel resulted in the symmetric biscalix[4]arene 7 in high yield. Oxidation of compounds 7 and 8 by Tl(CO₂CF₃)₃ in CF₃COOH yielded biscalix[4]quinones, 9 and 10, respectively. Preliminary electrochemical studies by cyclic voltammetry of 9 and 10 show significant changes of their voltammograms upon addition of Na⁺.     

1,1-(1-Propene-1,3-diyl)-ferrocene: modified synthesis, crystal structure, and polymerisation behaviour

The dehydro[3](1,1^′)ferrocenophanes, 1,1^′-(1-propene-1,3-diyl)-ferrocene (3a), and 1,1^′-(3-phenyl-1-propene-1,3-diyl)-ferrocene (3b) were synthesised under Shapiro conditions from the tosylhydrazones of the corresponding α-oxo-[3](1,1^′)ferrocenophanes. Electrochemistry shows 3a is oxidised at smilar potential to ferrocene; according 3a can be chemically oxidised using silver trifluoromethanesulfonate. The structure of 3a shows a ring tilt of 11.3°. Attempts to polymerise 3a using the ROMP initiator Mo(CHCMe₂Ph)[N(2,6-ⁱPr₂C₆H₃)][OCMe(CF₃)₂]₂ led to a mixture of insoluble material and a soluble mixture of apparently cyclic oligomers ([3a]_n).     

Highly stereoselective syn-ring opening of enantiopure epoxides with nitric oxide

Reaction of enantiopure epoxides (1) with NO occurred highly stereoselectively, affording syn-ring opened products, nitrates (2). The configuration of 2 was confirmed to be retained by determining the configuration of reduced products 1,2-glycols (4) from 2. A possible mechanism is suggested to trace out the syn-ring opening pathway.     

Dicationic triple-decker complexes with a bridging boratabenzene ligand

New dicationic triple-decker complexes with a bridging boratabenzene ligand [Cp*Fe(μ-η:η-C₅H₅BMe)ML]X₂ (ML=CoCp*, 6(CF₃SO₃)₂; RhCp, 7(BF₄)₂; IrCp, 8(CF₃SO₃)₂; Ru(η-C₆H₆), 9(CF₃SO₃)₂; Ru(η-C₆H₃Me₃-1,3,5), 10(CF₃SO₃)₂; Ru(η-C₆Me₆), 11(CF₃SO₃)₂) were synthesized by stacking reactions of Cp*Fe(η-C₅H₅BMe) (2) with the corresponding half-sandwich fragments [ML]²⁺. The structure of 10(CF₃SO₃)₂ was determined by X-ray diffraction study.     

Synthesis of carba analogs of 6-O-(benzyl)-d-allal- and -d-galactal-derived allyl epoxides and evaluation of the regio- and stereoselective behavior in nucleophilic addition reactions

The new racemic diastereoisomeric epoxides 6α and 6β, the carba analogs of the corresponding d-galactal- and d-allal-derived allyl epoxides have been synthesized and their regio- and stereoselective behavior examined in addition reactions with model O-, C-, N-, and S-nucleophiles. The results have indicated that epoxide 6β has a pronounced tendency toward anti-1,2-addition, whereas epoxide 6α shows interesting levels of syn- and/or anti-1,4-addition processes. A chiral recognition process found with epoxide 6β, turned out to be consistently reduced in epoxide 6α. All the results have been rationalized on the basis of conformational, steric, and stereoelectronic effects.     

N-heterocyclic carbene complexes of Zn(II): synthesis, X-ray structures and reactivity

The synthesis of six novel zinc (II) mono(N-heterocyclic carbene) complexes is described. 1,3-Bis(mesityl)-imidazol-2-ylidene was reacted with the zinc salts ZnX₂ (X=Cl, CH₃COO, PhCOO, and PhCH₂COO) to yield the corresponding monomeric Zn-NHC complex ZnCl₂(NHC)(THF) (1) and dimeric [Zn(OOCCH₃)₂(NHC)]₂ (2), [Zn(OOCPh)₂(NHC)]₂ (3), [Zn(OOCCH₂Ph)₂(NHC)]₂ (4) (NHC=1,3-bis(mesityl)-imidazol-2-ylidene). Reaction of 1 with 2 equivalents of silver trifluoromethanesulfonate yielded monomeric Zn(O₃SCF₃)₂(NHC)(THF) (5), reaction of 1 with sodium {[R(+)-α-2-(1-phenyl-ethylimino)-methyl]-phenolate} yielded monomeric ZnCl(OC₆H₄-2-CHN(CHPhCH₃)(NHC) (6). Compounds 1, 4-6 were structurally characterized by X-ray analysis. Selected compounds were investigated for their activity in the copolymerization of carbon dioxide with cyclohexene oxide as well as in the ring-opening polymerization of cyclohexene oxide and ε-caprolactone.     

(Fluorosilyl)ethylenediamines and fluorosilyl-1,3-diaza-2-silacyclopentanes

This paper presents the chemistry of ethylenediamines and fluorosilanes. The synthesis of thermally stable monosilyl (1-5)- and bis(fluorosilyl)ethylenediamines (6) is described. Starting with the dilithium salt of ethylenediamine and F₂Si(CMe₃)₂ the five-membered 1,3-diaza-2-silacyclopentane (8) is obtained. The reaction of tetra- and trifluorosilanes with dilithiated bis(silyl)ethylenediamines leads to the formation of 1,3-diaza-2-fluorosilylsilacyclopentanes (9-14). Fluorosilanes substitute 8 in 1 and 3 positions (15-28). A fluorosilyl-bridged five-membered ring (29) is isolated in the reaction of 1-trimethylsilyl-1,3-diaza-2-silacyclopentane, BuLi and MeSiF₃. In the synthesis of N-fluorosilyl-1,3-diaza-2-silacyclopentanes constitutional isomers were formed (30-33). Quantum-chemical calculations support the isomerisation mechanism. An iminosilane with an SiN double bond is the intermediate product of the rearrangement process.Crystal structures of 7, 13, 20 and 23 are reported.     

Chiral organochlorosilanes derived from terpenes: diastereoselective hydrosilylation of methylene bicyclo[2.2.1]heptanes with HSiMenCln − 2 (n=0-2)

The H₂PtCl₆ catalysed hydrosilylation of the terpenes (+)-α-fenchene (XI), (−)-2-methylene bornane (XII), (+)-camphene (XIII) and (−)-3-methylene fenchane (XIV) using HSiMe₂Cl or HSiMeCl₂ proceeds with high regioselectively and in some cases, with high diastereoselectivity. KF-assisted oxidation of the hydrosilylation products gives predominately endo-terpene alcohols. The alcohols have inverted endo/exo ratios to those formed by oxidative hydroboration. Reaction of XIV with HSiMe₂Cl or HSiMeCl₂ is accompanied by a clean rearrangement of the isocamphane skeleton into (+)-2-methylene bornane (XII) prior to hydrosilylation.     

Influence of the counteranion on silver(I)–dithioether coordination polymers

In order to rationalize the effect of the size and coordinating ability of counteranions upon the structure of Ag(I)–dithioether coordination polymers, a series of such polymers has been synthesized by the combination of the 1,3-bis(methylthio)propane building block and AgX silver salts (X = ClO₄⁻ (1), BF₄⁻ (2), CF₃SO₃⁻ (3), SbF₆⁻ (4), C₆H₅COO⁻ (5), CF₃COO⁻ (6), CF₃CF₂CF₂COO⁻ (7) and ⁻OOCCF₂CF₂COO⁻ (8)). Except in two cases, all complexes form 1D-coordination polymers.     

Structural diversity in the self-assembly of Ag(I) complexes containing 2-amino-5-halopyrimidine

A series of Ag(I) complexes containing the 2-amino-5-halopyrimidine ligands have been synthesized and their structures characterized by X-ray crystallography. The isomorphous complexes Ag(L-Cl)₂(CF₃SO₃) (L-Cl = 2-amino-5-chloropyrimidine), 1, and Ag(L-Br)₂(CF₃SO₃) (L-Br = 2-amino-5-bromopyrimidine), 2, are mononuclear, while [Ag(L-Br)(CF₃SO₃)]₆·6C₄H₁₀O, 3, and [Ag(L-I)(CF₃SO₃)]₆ (L-I = 2-amino-5-iodopyrimidine), 4, show cyclic self-assembly of six Ag(Ι) atoms and six L-X ligands, resulting in 24-membered metallocycles. The complex [Ag(L-I)(CF₃SO₃)]_∞, 5, forms 1D zigzag chains which are linked through C-I?Ag and Ag?O interactions to form a 3D structure. The tetranuclear complexes [Ag(L-X)(NO₃)]₄ [X = Cl, 6; Br, 7] form 16-membered metallocycles, while [Ag(L-X)(ClO₄)]_∞ [X = Cl, 8; Br, 9] exhibit helical chains. The different structure of 5 from 1 and 2 appears to be due to the stronger nucleophilic character of the iodine atom. In these complexes, the relatively smaller NO₃⁻ anions lead to the formation of tetranuclear metallocycles and the larger CF₃SO₃⁻ anions support the hexanuclear metallocycles, whereas the ClO₄⁻ anions induce the helical chains.