Cationic polymerization of vinyl ethers with alkyl or ionic side groups in ionic liquids

Controlled cationic polymerization of isobutyl vinyl ether was demonstrated to proceed in an ionic liquid (IL), 1‐butyl‐3‐octylimidazolium bis(trifluoromethanesulfonyl)imide, using a 1‐(isobutoxy)ethyl acetate/TiCl₄ initiating system, ethyl acetate as an added base, and 2,6‐di‐tert‐butylpyridine as a proton trap reagent. Judicious choices of metal halide catalysts, counteranions of ILs, and additives were essential for controlling the polymerization. The polymerization proceeded much faster in the IL than in CH₂Cl₂, indicating an increased population of ionic active species in the IL due to the high polarity. Polymers with a relatively narrow molecular weight distribution were obtained in the IL with a bis(trifluoromethanesulfonyl)imide ( ) anion even in the absence of an added base, which suggested possible interactions of the counteranion of the IL with the growing carbocations. Moreover, the direct cationic polymerization of a vinyl ether with pendant imidazolium salts, 1‐(2‐vinyloxyethyl)‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide, proceeded in a homogeneous state in 1‐methyl‐3‐octylimidazolium bis(trifluoromethanesulfonyl)imide. The solubilities of the obtained polymers were readily tuned by counteranion exchange. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1774–1784     

Vibrational Dephasing in Ionic Liquids as a Signature of Hydrogen Bonding

Understanding both structure and dynamics is crucial for producing tailor‐made ionic liquids (ILs). We studied the vibrational and structural dynamics of medium versus weakly hydrogen‐bonded C?H groups of the imidazolium ring in ILs of the type [1‐alkyl‐3‐methylimidazolium][bis(trifluoromethanesulfonyl)imide] ([C_nmim][NTf₂]), with n=1, 2, and 8, by time‐resolved coherent anti‐Stokes Raman scattering (CARS) and quantum‐classical hybrid (QCH) simulations. From the time series of the CARS spectra, dephasing times were extracted by modeling the full nonlinear response. From the QCH calculations, pure dephasing times were obtained by analyzing the distribution of transition frequencies. Experiments and calculations reveal larger dephasing rates for the vibrational stretching modes of C(2)?H compared with the more weakly hydrogen‐bonded C(4,5)?H. This finding can be understood in terms of different H‐bonding motifs and the fast interconversion between them. Differences in population relaxation rates are attributed to Fermi resonance interactions.     

Electrochemical Ammonia Gas Sensing in Nonaqueous Systems: A Comparison of Propylene Carbonate with Room Temperature Ionic Liquids

First, the direct and indirect electrochemical oxidation of ammonia has been studied by cyclic voltammetry at glassy carbon electrodes in propylene carbonate. In the case of the indirect oxidation of ammonia, its analytical utility of indirect for ammonia sensing was examined in the range from 10 and 100 ppm by measuring the peak current of new wave resulting from reaction between ammonia and hydroquinone, as function of ammonia concentration, giving a sensitivity 1.29×10^?7 A ppm^?1 (r²=0.999) and limit‐of‐detection 5 ppm ammonia. Further, the direct oxidation of ammonia has been investigated in several room temperature ionic liquids (RTILs), namely 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim] [BF₄]), 1‐butyl‐3‐methylimidazolium trifluoromethylsulfonate ([C₄mim] [OTf]), 1‐Ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₂mim] [NTf₂]), 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim] [NTf₂]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim] [PF₆]) on a 10 μm diameter Pt microdisk electrode. In four of the RTILs studied, the cyclic voltammetric analysis suggests that ammonia is initially oxidized to nitrogen, N₂, and protons, which are transferred to an ammonia molecule, forming NH via the protonation of the anion(s) (A^?). However, in [C₄mim] [PF₆], the protonated anion was formed first, followed by NH . In all five RTILs, both HA and NH are reduced at the electrode surface, forming hydrogen gas, which is then oxidized. The analytical ability of this work has also been explored further, giving a limit‐of‐detection close to 50 ppm in [C₂mim] [NTf₂], [C₄mim] [OTf], [C₄mim] [BF₄], with a sensitivity of ca. 6×10^?7 A ppm^?1 (r²=0.999) for all three ionic liquids, showing that the limit of detection was ca. ten times larger than that in propylene carbonate since ammonia in propylene carbonate might be more soluble in comparison with RTILs when considering the higher viscosity of RTILs.     

Abrasive Stripping Voltammetric Studies of Lignin and Lignin Model Compounds

Lignin is potentially a major renewable, nonfossil source of aromatic and cyclohexyl compounds. In this study, we have investigated the abrasive stripping voltammetry of lignin and four lignin model compounds in the room temperature ionic liquids (RTILs) [C₄mim][NTf₂], [N_6,2,2,2][NTf₂] and [C₄mim][OTf] (where [C₄mim]⁺=1‐butyl‐3‐methylimidazolium, [N_6,2,2,2]⁺=n‐hexyltriethylammonium, [NTf₂]^?=bis(trifluoromethanesulfonyl)imide and [OTf]^? =trifluoromethanesulfonate) on a gold macrodisk and in 0.1 M H₂SO₄ and 0.1 M NaOH on a boron‐doped diamond (BDD) macroelectrode, with the hope of using the voltammetry to fingerprint the functional groups within the lignin molecule. The use of RTILs on metal electrodes, or either acidic or basic media in combination with BDD electrodes allows solvent systems with wide electrochemical potential windows, useful for studying voltammetry which may be difficult to observe in systems where early breakdown of the solvent occurs.     

A Detailed Study of the (Electro)chemical Behavior of Bis(trifluoromethanesulfonyl)imide Based Ionic Liquids at Different Purification Steps

A systematic investigation of the major impurities content as well as of their effect on the electrochemical behavior of synthesized N‐butyl‐N‐methylpyrrolidinium (Py_1.4), N‐(2‐methoxyethyl)‐N‐methylpyrrolidinium (Py_1.102) and 1‐butyl‐3‐methylimidazolium (bmim) bis(trifluoromethanesulfonyl)imide has been carried out and the efficacy of an optimized multistep purification protocol for obtaining ILs suitable for electrochemical applications has been verified.     

Novel Bipyridinium Ionic Liquids as Liquid Electrochromic Devices

Novel mono and dialkylbipyridinium (viologens) cations combined with iodide, bromide, or bis(trifluoromethanesulfonyl)imide [NTf₂] as anions were developed. Selective alkylation synthetic methodologies were optimized in order to obtain the desired salts in moderate to high yields and higher purities. All prepared mono‐ and dialkylbipyridinium salts were completely characterized by ¹H, ¹³C, and ¹⁹F NMR spectroscopy, Fourier‐transform IR spectroscopy, and elemental analysis (in the case of NTf₂ salts). Melting points, glass transition temperatures by differential scanning calorimetry (DSC) studies, and decomposition temperatures were also checked for different prepared organic salts. Viscosities at specific temperatures and activation energies were determined by rheological studies (including viscosity dependence with temperature in heating and cooling processes). Electrochemical studies based on cyclic voltammetry (CV), differential pulsed voltammetry (DPV), and square‐wave voltammetry (SWV) were performed in order to determine the redox potential as well as evaluate reversibility behavior of the novel bipyridinium salts. As proof of concept, we developed a reversible liquid electrochromic device in the form of a U‐tube system, the most promising dialkylbipyridinium‐NTf₂ ionic liquid being used as the electrochromic material and the room‐temperature ionic liquid (RTIL), 1‐ethyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)‐imide [EMIM][NTf₂], as a stable and efficient electrolyte.     

Investigation of ionic liquids under Bi‐ion and Bi‐cluster ions bombardment by ToF‐SIMS

A systematic study of five different imidazolium‐based room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium acetate, 1‐butyl‐3‐methylimidazolium nitrate, 1‐butyl‐3‐methylimidazolium iodide, 1‐butyl‐3‐methylimidazolium hexafluorophosphate and 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide were carried out by means of time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) in positive and negative ion mode. The compounds were measured under Bi‐ion and Bi‐cluster ions (Bi_2–7⁺, Bi_{3, 5}²⁺) bombardment, and spectral information and general rules for the fragmentation pattern are presented. Evidence for hydrogen bonding, due to high molecular secondary cluster ions, could be found. Hydrogen bonding strength could be estimated by ToF‐SIMS via correlation of the anionic yield enhancement with solvent parameters. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Novel Ionic Liquids: N‐Substituted Aziridinium Salts

Ionic liquids based on three‐membered ring aziridinium cations have been synthesized for the first time using a straightforward synthetic route. N‐butyl‐N‐methylaziridinium bis(trifluoromethanesulfonyl)imide, N‐propyl‐N‐ethylaziridinium bis(trifluoromethanesulfonyl)imide, N‐butyl‐N‐[2‐(2‐methoxyethoxy)ethyl]aziridinium bis(trifluoromethanesulfonyl)imide, N‐butyl‐N‐methylaziridinium dicyanamide, and N‐butyl‐N‐ethylaziridinium dicyanamide were thus obtained in good yields and satisfactory purity and fully characterized.     

A Hybrid Anion for Ionic Liquid and Battery Electrolyte Applications: Half Triflamide,Half Carbonate

The synthesis of a new imide type anion, methylcarbonate(trifluoromethylsulfonyl)imide (MCTFSI) is described and the physicochemical properties of its sodium and N‐butyl‐N‐methyl pyrrolidinium salts as well as structural information obtained by X‐ray diffraction studies of the sodium salt are discussed in terms of charge delocalisation, coordination chemistry and electrochemical behaviour with respect to the analogous imdides bis(trifluoromethanesulfonyl)imide (TFSI) and bis(fluorosulfonyl)imide (FSI). The insight obtained from studying the new anion informs and reemphasizes the concept of weakly coordinating anions and coordination chemistry in designing electrolyte salts.     

Synthesis,Characterization, Biological Evaluation,and In Silico Studies of Imidazolium-, Pyridinium-, and Ammonium-Based Ionic Liquids Containing n-Butyl Side Chains

Ionic liquids (ILs) have emerged as active pharmaceutical ingredients because of their excellent antibacterial and biological activities. Herein, we used the green-chemistry-synthesis procedure, also known as the metathesis method, to develop three series of ionic liquids using 1-methyl-3-butyl imidazolium, butyl pyridinium, and diethyldibutylammonium as cations, and bromide (Br⁻), methanesulfonate (CH₃SO₃⁻), bis(trifluoromethanesulfonyl)imide (NTf₂⁻), dichloroacetate (CHCl₂CO₂⁻), tetrafluoroborate (BF₄⁻), and hydrogen sulfate (HSO₄⁻) as anions. Spectroscopic methods were used to validate the structures of the lab-synthesized ILs. We performed an agar well diffusion assay by using pathogenic bacteria that cause various infections (Escherichia coli; Enterobacter aerogenes; Klebsiella pneumoniae; Proteus vulgaris; Pseudomonas aeruginosa; Streptococcus pneumoniae; Streptococcus pyogenes) to scrutinize the in vitro antibacterial activity of the ILs. It was established that the nature and unique combination of the cations and anions were responsible for the antibacterial activity of the ILs. Among the tested ionic liquids, the imidazolium cation and NTf₂⁻ and HSO₄⁻ anions exhibited the highest antibacterial activity. The antibacterial potential was further investigated by in silico studies, and it was observed that bis(trifluoromethanesulfonyl)imide (NTf₂⁻) containing imidazolium and pyridinium ionic liquids showed the maximum inhibition against the targeted bacterial strains and could be utilized in antibiotics. These antibacterial activities float the ILs as a promising alternative to the existing antibiotics and antiseptics.     

Transport Properties and Phase Behaviour in Binary and Ternary Ionic Liquid Electrolyte Systems of Interest in Lithium Batteries

A binary ionic liquid (IL) system based on a common cation, N‐methyl‐N‐propylpyrrolidinium (C₃mpyr⁺), and either bis(trifluoromethanesulfonyl)imide (NTf₂^?) or bis(fluorosulfonyl) imide (FSI^?) as the anion is explored over its entire composition range. Phase behavior, determined by DSC, shows the presence of a eutectic temperature at 247 K and composition around an anion ratio of 2:1 (FSI^?:NTf₂^?) with the phase diagram for this system proposed (under the thermal conditions used). Importantly for electrochemical devices, the single phase melting transition at the eutectic is well below ambient temperatures (247 K). To investigate the effect of such anion mixing on the lithium ion speciation, conductivity and PFG–NMR diffusion measurements were performed in both the binary IL system as well as the Li‐NTf₂‐containing ternary system. The addition of the lithium salt to the mixed IL system resulted in a decrease in conductivity, as is commonly observed in the single‐component IL systems. For a fixed lithium salt composition, both conductivity and ion diffusion have linear behaviour as a function of the anion ratio, however, the rate of change of the diffusion coefficient seems greater in the presence of lithium. From the application point of view, the addition of the FSI^? to the NTf₂^? IL results in a considerable increase in lithium ion diffusivity at room temperature and no evidence of additional complex ion behaviour.     

Electrochemical Determination of Manganese Solubility in Mercury via Amalgamation and Stripping in the Room Temperature Ionic Liquid n‐Hexyltriethylammonium Bis(trifluoromethanesulfonyl)imide, [N6,2,2,2][NTf2]

The solubility of manganese in mercury was determined electrochemically via amalgamation and stripping in the room temperature ionic liquid n‐hexyltriethylammonium bis(trifluoromethanesulfonyl)imide, [N_6,2,2,2][NTf₂]. A hemispherical mercury electrode was made by electrodepositing mercury onto a planar platinum microelectrode. Cyclic voltammetry of Mn²⁺ in [N_6,2,2,2][NTf₂] at the mercury microhemisphere electrode was investigated at temperatures of 298, 303 and 313 K. The solubility of Mn in Hg was determined on the basis of the charge under the reduction peak (Mn²⁺→Mn⁰) and the corresponding reoxidation.     

Raman Spectroscopic Study on Alkyl Chain Conformation in 1‐Butyl‐3‐methylimidazolium Ionic Liquids and their Aqueous Mixtures

Ionic liquids of 1‐butyl‐3‐methylimidazolium ([BMIM]) cation with different anions (Cl^?, Br^?, I^?, and BF₄^?), and their aqueous mixtures were investigated by using Raman spectroscopy and dispersion‐included density functional theory (DFT). The characteristic Raman bands at 600 and 624 cm^?1 for two isomers of the butyl chain in the imidazolium cation showed significant changes in intensity for different anions as well as in aqueous solutions. The area ratio of these two bands followed the order I^?>Br^?>Cl^?>BF₄^? (in terms of the anion X in [BMIM]X), indicating that the butyl chain of [BMIM]I tends to adopt the trans conformation. The butyl chain was found to adopt the gauche conformation upon dilution, irrespective of the anion type. The Raman bands in the butyl C?H stretch region for [BMIM]X (X=Cl^?, Br^?, and I^?) blueshifted significantly with the increase in the water concentration, whereas that for [BMIM]BF₄ changed very little upon dilution. The blueshift in the C?H stretch region upon dilution also followed the order: [BMIM]I>[BMIM]Br>[BMIM]Cl>[BMIM]BF₄, the same order as the above trans conformation preference of the butyl chain in pure imidazolium ionic liquids, which suggested that the cation‐anion interaction plays a role in determining the conformation of the chain.     

Gas‐Phase Affinity Scales for Typical Ionic Liquid Moieties Determined by using Cooks’ Kinetic Method

Gas‐phase affinity studies based on cations and anions commonly present in ionic liquid structures, give quantitative information about the magnitude of the interactions holding the two species together when ILs are formed. They also provide clues on how these interactions depend on the nature of the cationic and anionic moieties. In the present work, mass spectrometric experiments, performed using electrospray ionization quadrupole ion‐trap and Fourier transform ion cyclotron resonance mass spectrometry, were used to obtain two affinity scales by Cooks’ kinetic method: one scale for the various cations for the bis(trifluoromethylsulfonyl)imide anion, [NTf₂]^?, and another for the different anions for the 1‐butyl‐3‐methylimidazolium cation, [C₄mim]⁺. The obtained results are compared with previously reported data and discussed in terms of the structural characteristics of the different cationic and anionic species.     

The First Homoleptic Bis(trifluoromethanesulfonyl)amide Complex of Yttrium: [bmim][Y(Tf2N)4]

1‐Butyl‐3‐methylimidazolium tetrakis‐(bis(trifluoromethanesulfonyl)amide)yttrium(III), [bmim][Y(Tf₂N)₄], was obtained from the ionic liquid 1‐butyl‐3‐methylimidazoliumbis(trifluoromethanesulfonyl)amide, [bmim][Tf₂N] and yttrium(III)bis(trifluoromethanesulfonyl)amide, Y(Tf₂N)₃. The crystal structure [monoclinic, C2/c (no. 15), a = 2096.(1), b = 1451.5(1), c = 1608.55(9) pm, β = 109.669(6)°, V = 4608.1(5)·10⁶ pm³, Z = 4, R₁ for 3874 symmetry independent reflections with I₀>2σ(I₀): 0.0438] contains Y^III coordinated by four Tf₂N‐ligands which all adopt a transoid‐conformation with respect to their –CF₃ groups. The oxygen coordination polyhedron around Y^III can be best described as a trigonal dodecahedron.One 1‐butyl‐3‐methylimidazolium cation compensates for the charge of the complex [Y(Tf₂N)₄]^? anion.     

Geminal Ionic Liquids: A Combined Approach to Investigate Their Three‐Dimensional Organisation

Different investigations, such as 1D and 2D NMR spectroscopy, resonance light scattering spectroscopy and molecular dynamics simulations, have been jointly used to achieve a deeper understanding of the degree of structural order in two geminal ionic liquids. In particular, 3,3′‐di‐n‐butyl‐1,1′‐(1,3‐phenylenedimethylene)diimidazolium and 3,3′‐di‐n‐butyl‐1,1′‐(1,4‐phenylenedimethylene)diimidazolium bis[bis(trifluoromethanesulfonyl)imide] have been studied. These geminal ionic liquids were chosen because of the presence of both a rigid phenylenedimethylene link between two imidazolium rings, which should give a high degree of order to the solvent system, and the different shapes of the two cations of the isomers, which could induce different properties and packing in the liquid state. Data collected here show that the two geminal ionic liquids are characterised by a different degree of structural order that induces, for example, a different sensitivity of the two solvent systems to temperature changes or to the presence of a co‐solvent such as methanol.     

Molecularly imprinted SPE coupled with HPLC for the selective separation and enrichment of alkyl imidazolium ionic liquids in environmental water samples

A novel 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted solid‐phase sorbent was synthesized. The as‐prepared material was characterized by SEM, Brunauer–Emmett–Teller surface area analysis and Fourier Transform IR measurements. Then its adsorption properties for alkyl imidazolium ionic liquids, including adsorption capacities, adsorption kinetics, and properties of selective separation and enrichment were studied in detail. It was shown that the ionic liquid surface imprinted polymer exhibited high selective recognition characteristics for the imidazolium chloride ionic liquids with short alkyl chains (C_nmimCl, n = 2, 4, 6, 8) and the adsorption equilibrium was achieved within 25 min. Various parameters were optimized for the 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted polymer SPE column, such as flow rate, eluent solvent, selectivity, and reusability of the column. Then, the SPE column coupled with HPLC was used for the determination of alkyl imidazolium ionic liquids. Experimental results showed that the existence of their structural analogs and common concomitants in environmental matrices did not affect the enrichment of 1‐butyl‐3‐methyl imidazolium chloride ionic liquid. The average recoveries of 1‐butyl‐3‐methylimidazolium chloride ionic liquid in spiked water samples were in the range of 92.0–102.0% with the RSD lower than 5.8%.     

Measurement and Correlation of the Ionic Conductivity of Ionic Liauid-Molecular Solvent Solutions

The ionic conductivity of the solutions formed from 1-n-butyl-3-methylimidazolium tetrafluoroborate （[Bmim][BF4]） or 1-n-butyl-3-methylimidazolium hexafluorophosphate （[Bmim][PF6]） and different molecular solvents （MSs） were measured at 298.15 K. The molar conductivity of the ionic liquids （ILs） increased dramatically with increasing concentration of the MSs. It was found that the molar conductivity of the IL in the solutions studied in this work could be well correlated by the molar conductivity of the neat ILs and the dielectric constant and molar volume of the MSs.     

Reference Electrode for Ionic Liquids

Reference electrodes for room temperature ionic liquid (RTIL) applications were constructed that have a known and reproducible potential versus the ferrocene/ferrocenium couple. They are based on reference electrodes of the first kind, Ag/Ag⁺ couple type, or of the second kind, based on Ag/AgCl in M⁺Cl^?. The former uses AgNO₃ salt and the latter tetrabutylammonium chloride, Bu₄NCl, dissolved in acetonitrile which are then introduced to the ionic liquid of choice for a final concentration of 0.1 M. The reference electrodes can be easily and reproducibly constructed. An ionic contact of these reference systems with the test electrolyte was made using an asbestos fiber liquid junction. The internal compartment of the reference system was filled with the same ionic liquid as used for the electrochemical experiment. The performance of these reference electrodes was tested in selected ionic liquids using the ferrocene/ferrocenium redox couple. The stability, reproducibility, and temperature behavior of the two reference systems have been characterized in the following ionic liquids: 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIBF₄), 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI(CF₃SO₂)₂N), and 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIPF₆). It has been found that the formal potentials of the examined reference systems are stable over several days. There is a linear relationship for the temperature studied in the range from 25 to 60 °C.     

Green Synthesis of Pyrano[2,3‐d]‐pyrimidine Derivatives in Ionic Liquids

Pyrano[2,3‐d]pyrimidine derivatives were synthesized in high yields by a condensation reaction between arylmethylidenemalononitrile and barbituric acid using room‐temperature ionic liquids such as 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm]BF₄) or 1‐butylpyridinium tetrafluoroborate ([BPy]BF₄) as solvents under neutral conditions.