Discovery of Key TIPS‐Naphthalene for Efficient Visible‐to‐UV Photon Upconversion under Sunlight and Room Light**

While many studies have been done on triplet–triplet annihilation‐based photon upconversion (TTA‐UC) to produce visible light with high efficiency, the efficient TTA‐UC from visible to UV light, despite its importance for a variety of solar and indoor applications, remains a challenging task. Here, we report the highest visible‐to‐UV TTA‐UC efficiency of 20.5 % based on the discovery of an excellent UV emitter, 1,4‐bis((triisopropylsilyl)ethynyl)naphthalene (TIPS‐Nph). TIPS‐Nph is an acceptor with desirable features of high fluorescence quantum yield and high singlet generation efficiency by TTA. TIPS‐Nph has a low enough triplet energy level to be sensitized by Ir(C6)₂(acac), a superior donor that does not quench UV emission. The combination of TIPS‐Nph and Ir(C6)₂(acac) realizes the efficient UV light production even with weak light sources such as an AM 1.5 solar simulator and room LEDs.     

Employing Core‐Shell Quantum Dots as Triplet Sensitizers for Photon Upconversion

A new family of surface‐functionalized CdSe/ZnS core‐shell quantum dots (csQD) has been developed, which work as triplet sensitizers for triplet‐triplet annihilation‐based photon upconversion (TTA‐UC). The surface modification of csQD with acceptor molecules plays a key role in the efficient relay of the excited energy of csQD to emitter molecules in the bulk solution, where the generated emitter triplets undergo triplet‐triplet annihilation that leads to photon upconversion. Interestingly, improved UC properties were achieved with the core‐shell QDs compared with core‐only CdSe QDs (cQD). The threshold excitation intensity, which is defined as the necessary irradiance to achieve efficient TTA process, decreases by more than a factor of four. Furthermore, the total UC quantum yield is enhanced more than 50‐fold. These enhancements should be derived from better optical properties of csQD, in which the non‐radiative surface recombination sites are passivated by the shell layer with wider bandgap.     

Pd–Porphyrin Oligomers Sensitized for Green‐to‐Blue Photon Upconversion: The More the Better?

A series of directly meso‐meso‐linked Pd–porphyrin oligomers (PdDTP‐M, PdDTP‐D, and PdDTP‐T) have been prepared. The absorption region and the light‐harvesting ability of the Pd–porphyrin oligomers are broadened and enhanced by increasing the number of Pd–porphyrin units. Triplet–triplet annihilation upconversion (TTA‐UC) systems were constructed by utilizing the Pd–porphyrin oligomers as the sensitizer and 9,10‐diphenylanthracene (DPA) as the acceptor in deaerated toluene and green‐to‐blue photon upconversion was observed upon excitation with a 532 nm laser. The triplet–triplet annihilation upconversion quantum efficiencies were found to be 6.2 %, 10.5 %, and 1.6 % for the [PdDTP‐M]/DPA, [PdDTP‐D]/DPA, and [PdDTP‐T]/DPA systems, respectively, under an excitation power density of 500 mW cm^?2. The photophysical processes of the TTA‐UC systems have been investigated in detail. The higher triplet–triplet annihilation upconversion quantum efficiency observed in the [PdDTP‐D]/DPA system can be rationalized by the enhanced light‐harvesting ability of PdDTP‐D at 532 nm. Under the same experimental conditions, the [PdDTP‐D]/DPA system produces more ³DPA* than the other two TTA‐UC systems, benefiting the triplet–triplet annihilation process. This work provides a useful way to develop efficient TTA‐UC systems with broad spectral response by using Pd–porphyrin oligomers as sensitizers.     

Supramolecular Crowding Can Avoid Oxygen Quenching of Photon Upconversion in Water

A common challenge in chemistry that deals with photoexcited states is to avoid oxygen quenching. This is crucial for hot research fields such as photon upconversion (UC), in which oxygen-sensitive triplet excited states play pivotal roles. However, methods to avoid oxygen quenching in aqueous media are far more limited despite eagerly anticipated catalytic and biological applications. This work introduces a simple strategy to achieve air-stable triplet–triplet annihilation (TTA)-based UC in water, namely, supramolecular crowding. Amphiphilic cationic acceptor molecules and anions with long alkyl chains co-assemble in water in which hydrophobic donor molecules are molecularly dispersed. Despite the common notion that oxygen molecules diffuse readily across hydrophobic domains in water, more than 80 % of the TTA-UC emission of the obtained hydrophobic co-assemblies is maintained in air-saturated water. This work demonstrates the new promising potential of supramolecular chemistry for photophysical and photochemical functions with oxygen-sensitive species.     

Stimuli‐Responsive Molecular Photon Upconversion

The addition of stimuli‐responsiveness to anti‐Stokes emission provides a unique platform for biosensing and chemosensing. Particularly, stimuli‐responsive photon upconversion based on triplet–triplet annihilation (TTA‐UC) is promising due to its occurrence at low excitation intensity with high efficiency. This Minireview summarizes the recent developments of TTA‐UC switching by external stimuli such as temperature, oxygen, chemicals, light, electric field, and mechanical force. For the systematic understanding of the underlying general mechanisms, the switching mechanisms are categorized into four types: 1) aggregation‐induced UC; 2) assembly‐induced air‐stable UC; 3) diffusion‐controlled UC; and 4) energy‐transfer‐controlled UC. The development of stimuli‐responsive smart TTA‐UC systems would enable sensing with unprecedented sensitivity and selectivity, and expand the scope of TTA‐UC photochemistry by combination with supramolecular chemistry, materials chemistry, mechanochemistry, and biochemistry.     

Oligo(ethylene glycol)/alkyl‐modified Chromophore Assemblies for Photon Upconversion in Water

Molecular self‐assembly is a powerful means to construct nanoscale materials with advanced photophysical properties. Although the protection of the photo‐excited states from oxygen quenching is a critical issue, it still has been in an early phase of development. In this work, we demonstrate that a simple and typical molecular design for aqueous supramolecular assembly, modification of the chromophoric unit with hydrophilic oligo(ethylene glycol) chains and hydrophobic alkyl chains, is effective to avoid oxygen quenching of triplet–triplet annihilation‐based photon upconversion (TTA‐UC). While a TTA‐UC emission is completely quenched when the donor and acceptor are molecularly dispersed in chloroform, their aqueous co‐assemblies exhibit a clear upconverted emission in air‐saturated water even under extremely low chromophore concentrations down to 40 μm . The generalization of this nano‐encapsulation approach offers new functions and applications using oxygen‐sensitive species for supramolecular chemistry.     

Near‐Infrared Optogenetic Genome Engineering Based on Photon‐Upconversion Hydrogels

Photon upconversion (UC) from near‐infrared (NIR) light to visible light has enabled optogenetic manipulations in deep tissues. However, materials for NIR optogenetics have been limited to inorganic UC nanoparticles. Herein, NIR‐light‐triggered optogenetics using biocompatible, organic TTA‐UC hydrogels is reported. To achieve triplet sensitization even in highly viscous hydrogel matrices, a NIR‐absorbing complex is covalently linked with energy‐pooling acceptor chromophores, which significantly elongates the donor triplet lifetime. The donor and acceptor are solubilized in hydrogels formed from biocompatible Pluronic F127 micelles, and heat treatment endows the excited triplets in the hydrogel with remarkable oxygen tolerance. Combined with photoactivatable Cre recombinase technology, NIR‐light stimulation successfully performs genome engineering resulting in the formation of dendritic‐spine‐like structures of hippocampal neurons.     

Expanding Anti‐Stokes Shifting in Triplet–Triplet Annihilation Upconversion for In Vivo Anticancer Prodrug Activation

A strategy to expand anti‐Stokes shifting from the far‐red to deep‐blue region in metal‐free triplet–triplet annihilation upconversion (TTA‐UC) is presented. The method is demonstrated by in vivo titration of the photorelease of an anticancer prodrug. This new TTA system has robust brightness and the longest anti‐Stokes shift of any reported TTA system. TTA core–shell‐structured prodrug delivery capsules that benefit from these properties were developed; they can operate with low‐power density far‐red light‐emitting diode light. These capsules contain mesoporous silica nanoparticles preloaded with TTA molecules as the core, and amphiphilic polymers encapsulating anticancer prodrug molecules as the shell. When stimulated by far‐red light, the intense TTA upconversion blue emission in the system activates the anticancer prodrug molecules and shows effective tumor growth inhibition in vivo. This work paves the way to new organic TTA upconversion techniques that are applicable to in vivo photocontrollable drug release and other biophotonic applications.     

Chiral self-assembly regulated photon upconversion based on triplet-triplet annihilation

Photon upconversion (UC) based on triplet-triplet annihilation (TTA) in quasi-solid or solid state has been attracting much research interest due to its great potential applications. To get effective UC, precisely controlled donor-acceptor interaction is vitally important. Chiral self-assembly provides a powerful approach for sophisticated regulation of molecular interaction. Here we report a chiral self-assembly controlled TTA-UC system composed of chiral acceptor and achiral donor. It is found that racemic mixture of acceptors could form straight fibrous nanostructures, which show strong UC emission, while chiral assemblies for homochiral acceptors emit weak upconverted light. The racemic assemblies allow efficient triplet-triplet energy transfer (TTET) and further realize efficient UC emission, while the homochiral assemblies from chiral acceptor produce twisted nanostructures, suppressing efficient triplet energy transfer and annihilation. The establishment of such chiral self-assembly controlled UC system highlights the potential applications of triplet fusion in optoelectronic materials and provides a new perspective for designing highly effective UC systems.     

Intersystem Crossing and Electron Spin Selectivity in Anthracene-Naphthalimide Compact Electron Donor-Acceptor Dyads Showing Different Geometry and Electronic Coupling Magnitudes

Anthracene-naphthalimide (An-NI) compact electron donor-acceptor dyads were prepared, in which the orientation and distance between the two subunits were varied by direct connection or with intervening phenyl linker. Efficient intersystem crossing (ISC) and long triplet state lifetime (Φ_Δ=92 %, τ_T=438 μs) were observed for the directly connected dyads showing a perpendicular geometry (81°). This efficient spin-orbit charge transfer ISC (SOCT-ISC) takes 376 fs, inhibits the direct charge recombination (CR) to ground state (¹CT→S₀, takes 3.04 ns). Interestingly, efficient SOCT-ISC for dyads with intervening phenyl linker (Φ_Δ=40 % in DCM) was also observed, although the electron donor and acceptor adopt almost coplanar geometry (dihedral angle: 15°). Time-resolved electron paramagnetic resonance (TREPR) spectroscopy shows that the electron spin polarization of the triplet state, i. e. the electron spin selectivity of ISC, is highly dependent on the dihedral angle and the linker. For the dyads showing weaker coupling between the donor and acceptors, the charge separation and the intramolecular triplet energy transfer are inhibited at 80 K (frozen solution), because both the ³An and ³NI states were observed and the ESP are same as compared to the native anthracene and naphthalimide, which unravel their origin. The dyads were used as triplet photosensitizers for triplet−triplet annihilation upconversion (TTA UC). High UC quantum yield (Φ_UC=12.9 %) as well as a large anti-Stokes shift (0.72 eV) was attained by excitation into the CT absorption band.     

Broadband Visible‐Light‐Harvesting trans‐Bis(alkylphosphine) Platinum(II)‐Alkynyl Complexes with Singlet Energy Transfer between BODIPY and Naphthalene Diimide Ligands

A heteroleptic bis(tributylphosphine) platinum(II)‐alkynyl complex ( Pt‐1 ) showing broadband visible‐light absorption was prepared. Two different visible‐light‐absorbing ligands, that is, ethynylated boron‐dipyrromethene (BODIPY) and a functionalized naphthalene diimide (NDI) were used in the molecule. Two reference complexes, Pt‐2 and Pt‐3 , which contain only the NDI or BODIPY ligand, respectively, were also prepared. The coordinated BODIPY ligand shows absorption at 503 nm and fluorescence at 516 nm, whereas the coordinated NDI ligand absorbs at 594 nm; the spectral overlap between the two ligands ensures intramolecular resonance energy transfer in Pt‐1 , with BODIPY as the singlet energy donor and NDI as the energy acceptor. The complex shows strong absorption in the region 450 nm–640 nm, with molar absorption coefficient up to 88 000 M ^?1 cm^?1. Long‐lived triplet excited states lifetimes were observed for Pt‐1 – Pt‐3 (36.9 μs, 28.3 μs, and 818.6 μs, respectively). Singlet and triplet energy transfer processes were studied by the fluorescence/phosphorescence excitation spectra, steady‐state and time‐resolved UV/Vis absorption and luminescence spectra, as well as nanosecond time‐resolved transient difference absorption spectra. A triplet‐state equilibrium was observed for Pt‐1 . The complexes were used as triplet photosensitizers for triplet–triplet annihilation upconversion, with upconversion quantum yields up to 18.4 % being observed for Pt‐1 .     

Remarkable Dependence of the Final Charge Separation Efficiency on the Donor–Acceptor Interaction in Photoinduced Electron Transfer

The unprecedented dependence of final charge separation efficiency as a function of donor–acceptor interaction in covalently‐linked molecules with a rectilinear rigid oligo‐p‐xylene bridge has been observed. Optimization of the donor–acceptor electronic coupling remarkably inhibits the undesirable rapid decay of the singlet charge‐separated state to the ground state, yielding the final long‐lived, triplet charge‐separated state with circa 100 % efficiency. This finding is extremely useful for the rational design of artificial photosynthesis and organic photovoltaic cells toward efficient solar energy conversion.     

Chiral self-assembly regulated photon upconversion based on triplet-triplet annihilation

Triplet-triplet annihilation based photon upconversion (TTA-UC) were constructed successfully by chiral self-assembly strategy.Enhanced TTA-UC could be obtained in the racemic assemblies compared with the homochiral assemblies.     

Triplet–Triplet Annihilation Upconversion in a MOF with Acceptor-Filled Channels

Photon upconversion has enjoyed increased interest in the last years due to its high potential for solar-energy harvesting and bioimaging. A challenge for triplet–triplet annihilation upconversion (TTA-UC) processes is to realize these features in solid materials without undesired phase segregation and detrimental dye aggregation. To achieve this, we combine a palladium porphyrin sensitizer and a 9,10-diphenylanthracene annihilator within a crystalline mesoporous metal–organic framework using an inverted design. In this modular TTA system, the framework walls constitute the fixed sensitizer, while caprylic acid coats the channels providing a solventlike environment for the mobile annihilator in the channels. The resulting solid material shows green-to-blue delayed upconverted emission with a luminescence lifetime of 373±5 μs, a threshold value of 329 mW cm⁻² and a triplet–triplet energy transfer efficiency of 82 %. The versatile design allows straightforward changing of the acceptor amount and type.     

Stimuli‐Responsive Dual‐Color Photon Upconversion: A Singlet‐to‐Triplet Absorption Sensitizer in a Soft Luminescent Cyclophane

Reversible emission color switching of triplet–triplet annihilation‐based photon upconversion (TTA‐UC) is achieved by employing an Os complex sensitizer with singlet‐to‐triplet (S‐T) absorption and an asymmetric luminescent cyclophane with switchable emission characteristics. The cyclophane contains the 9,10‐bis(phenylethynyl)anthracene unit as an emitter and can assemble into two different structures, a stable crystalline phase and a metastable supercooled nematic phase. The two structures exhibit green and yellow fluorescence, respectively, and can be accessed by distinct heating/cooling sequences. The hybridization of the cyclophane with the Os complex allows near‐infrared‐to‐visible TTA‐UC. The large anti‐Stokes shift is possible by the direct S‐T excitation, which dispenses with the use of a conventional sequence of singlet–singlet absorption and intersystem crossing. The TTA‐UC emission color is successfully switched between green and yellow by thermal stimulation.     

Dual Upconverted and Downconverted Circularly Polarized Luminescence in Donor–Acceptor Assemblies

Through mimicking both the chiral and energy transfer in an artificial self‐assembled system, not only was chiral transfer realized but also a dual upconverted and downconverted energy transfer system was created that emit circularly polarized luminescence. The individual chiral π‐gelator can self‐assemble into a nanofiber exhibiting supramolecular chirality and circularly polarized luminescence (CPL). In the presence of an achiral sensitizer Pd^II octaethylporphyrin derivative, both chirality transfer from chiral gelator to achiral sensitizer and triplet‐triplet energy transfer from excited sensitizer to chiral gelator could be realized. Upconverted CPL could be observed through a triplet–triplet annihilation photon upconversion (TTA‐UC), while downconverted CPL could be obtained from chirality‐transfer‐induced emission of the achiral sensitizer. The interplay between chiral energy acceptor and achiral sensitizer promoted the communication of chiral and excited energy information.     

New Anthracene Derivatives as Triplet Acceptors for Efficient Green‐to‐Blue Low‐Power Upconversion

Three new anthracene derivatives [2‐chloro‐9,10‐dip‐tolylanthracene (DTACl), 9,10‐dip‐tolylanthracene‐2‐carbonitrile (DTACN), and 9,10‐di(naphthalen‐1‐yl)anthracene‐2‐carbonitrile (DNACN)] were synthesized as triplet acceptors for low‐power upconversion. Their linear absorption, single‐photon‐excited fluorescence, and upconversion fluorescence properties were studied. The acceptors exhibit high fluorescence yields in DMF. Selective excitation of the sensitizer Pd^IIoctaethylporphyrin (PdOEP) in solution containing DTACl, DTACN, or DNA‐CN at 532 nm with an ultralow excitation power density of 0.5 W cm^?2 results in anti‐Stokes blue emission. The maximum upconversion quantum yield (Φ_UC=17.4 %) was obtained for the couple PdOEP/DTACl. In addition, the efficiency of the triplet–triplet energy transfer process was quantitatively studied by quenching experiments. Experimental results revealed that a highly effective acceptor for upconversion should combine high fluorescence quantum yields with efficient quenching of the sensitizer triplet.     

Long-Lived Triplet Excited State Accessed with Spin–Orbit Charge Transfer Intersystem Crossing in Red Light-Absorbing Phenoxazine-Styryl BODIPY Electron Donor/Acceptor Dyads

Orthogonal phenoxazine-styryl BODIPY compact electron donor/acceptor dyads were prepared as heavy atom-free triplet photosensitizers (PSs) with strong red light absorption (ϵ=1.33×10⁵ M⁻¹ cm⁻¹ at 630 nm), whereas the previously reported triplet photosensitizers based on the spin-orbit charge transfer intersystem crossing (SOCT-ISC) mechanism show absorption in a shorter wavelength range (<500 nm). More importantly, a long-lived triplet state (τ_T=333 μs) was observed for the new dyads. In comparison, the triplet state lifetime of the same chromophore accessed with the conventional heavy atom effect (HAE) is much shorter (τ_T=1.8 μs). Long triplet state lifetime is beneficial to enhance electron or energy transfer, the primary photophysical processes in the application of triplet PSs. Our approach is based on SOCT-ISC, without invoking of the HAE, which may shorten the triplet state lifetime. We used bisstyrylBodipy both as the electron acceptor and the visible light-harvesting chromophore, which shows red-light absorption. Femtosecond transient absorption spectra indicated the charge separation (109 ps) and SOCT-ISC (charge recombination, CR; 2.3 ns) for BDP-1 . ISC efficiency of BDP-1 was determined as Φ_T=25 % (in toluene). The dyad BDP-3 was used as triplet PS for triplet-triplet annihilation upconversion (upconversion quantum yield Φ_UC=1.5 %; anti-Stokes shift is 5900 cm⁻¹).     

Highly Efficient Triplet Photosensitizers: A Systematic Approach to the Application of IrIII Complexes containing Extended Phenanthrolines

A series of Ir^III complexes, based on 1,10‐phenanthroline featuring aryl acetylene chromophores, were prepared and investigated as triplet photosensitizers. The complexes were synthesized by Sonogashira cross‐coupling reactions using a “chemistry‐on‐the‐complex” method. The absorption properties and luminescence lifetimes were successfully tuned by controlling the number and type of light‐harvesting group. Intense UV/Vis absorption was observed for the Ir^III complexes with two light‐harvesting groups at the 3‐ and 8‐positions of the phenanthroline. The asymmetric Ir^III complex (with a triphenylamine (TPA) and a pyrene moiety attached) exhibited the longest lifetime. Red emission was observed for all the complexes in deaerated solutions at room temperature. Their emission at low temperature (77 K) and nanosecond time‐resolved transient difference absorption spectra revealed the origin of their triplet excited states. The singlet‐oxygen (¹O₂) sensitization and triplet‐triplet annihilation (TTA)‐based upconversion were explored. Highly efficient TTA upconversion (Φ_UC=28.1 %) and ¹O₂ sensitization (Φ_Δ=97.0 %) were achieved for the asymmetric Ir^III complex, which showed intense absorption in the visible region (λ_abs=482 nm, ?=50900 m ^?1 cm^?1) and had a long‐lived triplet excited state (53.3 μs at RT).     

Organic triplet sensitizer library derived from a single chromophore (BODIPY) with long-lived triplet excited state for triplet-triplet annihilation based upconversion

Triplet-triplet annihilation (TTA) based upconversions are attractive as a result of their readily tunable excitation/emission wavelength, low excitation power density, and high upconversion quantum yield. For TTA upconversion, triplet sensitizers and acceptors are combined to harvest the irradiation energy and to acquire emission at higher energy through triplet-triplet energy transfer (TTET) and TTA processes. Currently the triplet sensitizers are limited to the phosphorescent transition metal complexes, for which the tuning of UV-vis absorption and T(1) excited state energy level is difficult. Herein for the first time we proposed a library of organic triplet sensitizers based on a single chromophore of boron-dipyrromethene (BODIPY). The organic sensitizers show intense UV-vis absorptions at 510-629 nm (ε up to 180,000 M(-1) cm(-1)). Long-lived triplet excited state (τ(T) up to 66.3 μs) is populated upon excitation of the sensitizers, proved by nanosecond time-resolved transient difference absorption spectra and DFT calculations. With perylene or 1-chloro-9,10-bis(phenylethynyl)anthracene (1CBPEA) as the triplet acceptors, significant upconversion (Φ(UC) up to 6.1%) was observed for solution samples and polymer films, and the anti-Stokes shift was up to 0.56 eV. Our results pave the way for the design of organic triplet sensitizers and their applications in photovoltaics and upconversions, etc.