One‐Pot Synthesis of Carbon‐Supported Dendritic Pd‐Au Nanoalloys for Electrocatalytic Ethanol Oxidation

One‐pot synthesis of carbon‐supported Pd‐Au alloy nanoparticles with well‐defined dendritic shape (Pd‐Au_den/C) was achieved by co‐reduction of K₂PdCl₄/HAuCl₄ mixtures in a molar ratio of 1:1 with hydrazine in the presence of Vulcan XC‐72R. The prepared Pd‐Au_den/C exhibited significantly enhanced performance in the electrocatalytic oxidation of ethanol compared with dendritic Pd nanoparticles and a commercial Pd/C catalyst. Pd‐Au_den/C even showed higher durability in electro‐oxidation of ethanol than the supported catalyst prepared by the deposition of presynthesized dendritic Pd‐Au nanoparticles on the carbon support. The experimental results clearly indicate that enhanced interaction between nanoparticle catalysts and carbon support through the one‐pot synthesis protocol can improve the durability of the electrocatalysts.     

Electro‐oxidation of Methanol and Ethanol Catalyzed by Pt/ZSM‐5/C

Direct alcohol fuel cells are a promising source of future energy generation for small and portable devices. Platinum is considered the best catalyst for electro‐oxidation of alcohols in fuel cells but the major hurdles with platinum catalysts are high cost of platinum as well as low selectivity, slow reaction kinetics and carbonaceous poisoning associated with platinum. This particular research reports electro‐oxidation of methanol and ethanol over platinum electrodeposited on ZSM‐5 without any carbon additive. From the cyclic voltammetry and chronoamperometry, linear sweep voltammetry, tafel plot and multiple scan analyses, it is found that Pt/ZSM‐5/C electrodes can catalyze electro‐oxidation of methanol and ethanol with higher efficiency. ZSM‐5 supports the formation of smaller sized platinum nanoparticles in a dispersed manner on the zeolite support and thus increases the active surface area of the metal for catalytic activity. It favors adsorption of alcohol molecules on the modified electrode surface and thus increases the diffusion process. It also stabilizes the modified electrodes.     

Enhanced Electrocatalytic Activity of Dual Template Based Pt/Cu‐zeolite A/Graphene for Methanol Electrooxidation

A novel Pt/Cu‐zeolite A/graphene based electrocatalyst was successfully prepared by chemical reduction method for methanol electrooxidation. Graphite oxide and Cu functionalized zeolite A were simultaneously reduced by NaBH₄ to prepare Cu‐zeolite A/graphene support which was used to deposit Pt nanoparticles. The nanostructure and composition of as‐prepared Pt/Cu‐zeolite A/graphene composites were characterized by X‐ray diffractometer, X‐ray fluorescence, Fourier transform infrared spectrometer and scanning electron microscopy. The electrocatalytic properties of Pt/Cu‐zeolite A/graphene modified electrode for methanol oxidation were investigated by cyclic voltammetry and chronoamperometry in 0.10 mol/L H₂SO₄ + 0.50 mol/L CH₃OH solution. Compared with Pt/zeolite A/graphene electrode and Pt/graphene electrode, Pt/Cu‐zeolite A/graphene based electrode exhibited obviously enhanced current and higher electrocatalytic activity for methanol electrooxidation. The increased electrocatalytic activity was attributed to the presence of zeolite A and reduced graphene oxide based dual template, which significantly increased the effective electrode surface and facilitated the diffusion of analytes into the electroactive catalyst.     

Glucose Electro‐oxidation on Graphite Electrode Modified with Nickel/Chromium Nanoparticles

In this study, an available and inexpensive graphite substrate, was easily modified with Ni/Cr nanoparticles via electrodeposition technique in a very short time (3 min) and used as an electrocatalyst for glucose oxidation in alkaline solution. Graphite electrode modified with Ni/Cr nanoparticles demonstrated an outstanding electrocatalytic performance to glucose oxidation in comparison to examined Ni‐based electrodes or even different materials in other reports. It is noteworthy to mention that adding a little Cr led to a synergistic effect with Ni; accordingly, the presence of Cr not only resulted in a greater adsorption of glucose molecules by chromium oxide but also boosted conductivity of the nickel oxide because of the enhancement of Ni(III) amount. The electrochemical studies were performed by cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The morphology and structure of catalyst layer was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and energy dispersive x‐ray spectroscopy (EDS). The linear range of the electrode by cyclic voltammetry was between 2–31 mM with a high sensitivity of 2094 μA cm^?2 mM^?1. The repeatability and reproducibility of the proposed electrode was examined in glucose solution which were 0.3 % and 4.7 %, respectively. According to the low cost, ease and fast preparation, good repeatability and high sensitivity, this electrode can be a good candidate for nonenzymatic glucose oxidation.     

Observation of Single Pt Nanoparticle Collisions: Enhanced Electrocatalytic Activity on a Pd Ultramicroelectrode

Single Pt nanoparticle (NP) collisions on an electrode surface were detected by using an electrocatalytic amplification method with a Pd ultramicroelectrode (UME). Pd is not a preferred material for UMEs for the detection of single Pt NP collisions, because Pd shows similar electrocatalytic activity compared with Pt for hydrazine oxidation, thus resulting in a high background current level. However, a Pt NP colliding on the Pd UME shows greatly enhanced activity compared with a Pt NP on an inert UME, such as a Au UME, which is usually used for the detection of single Pt NP collisions. The use of an electroactive UME material instead of an inert one facilitated the study of single‐NP activity on the various solid supports, which is important in many NP applications.     

Microfluidic Synthesis Enables Dense and Uniform Loading of Surfactant‐Free PtSn Nanocrystals on Carbon Supports for Enhanced Ethanol Oxidation

Developing new synthetic methods for carbon supported catalysts with improved performance is of fundamental importance in advancing proton exchange membrane fuel cell (PEMFC) technology. Continuous‐flow, microfluidic reactions in capillary tube reactors are described, which are capable of synthesizing surfactant‐free, ultrafine PtSn alloyed nanoparticles (NPs) on various carbon supports (for example, commercial carbon black particles, carbon nanotubes, and graphene sheets). The PtSn NPs are highly crystalline with sizes smaller than 2 nm, and they are highly dispersed on the carbon supports with high loadings up to 33 wt %. These characteristics make the as‐synthesized carbon‐supported PtSn NPs more efficient than state of the art commercial Pt/C catalysts applied to the ethanol oxidation reaction (EOR). Significantly enhanced mass catalytic activity (two‐times that of Pt/C) and improved stability are obtained.     

β‐Cyclodextrin‐Platinum Nanoparticles/Graphene Nanohybrids: Enhanced Sensitivity for Electrochemical Detection of Naphthol Isomers

Naphthol isomers, including α‐naphthol (α‐NAP) and β‐naphthol (β‐NAP), are used widely in various fields and are harmful to the environment and human health. The qualitative and quantitative determination of naphthol isomers is therefore of great significance. Herein, β‐cyclodextrin (β‐CD)‐platinum nanoparticles (Pt NPs)/graphene nanosheets (GNs) nanohybrids (β‐CD‐PtNPs/GNs) were prepared for the first time using a simple wet chemical method and characterized by atomic force microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and electrochemical methods, and then applied successfully in the ultrasensitive electrochemical detection of naphthol isomers. The results show that the oxidation peak currents of naphthol isomers obtained at the glassy carbon (GC) electrode modified with β‐CD‐PtNPs/GNs are much higher than those at the β‐CD/GNs/GC, PtNPs/GNs/GC, GNs/GC, and bare GC electrodes. Additionally, compared with other electrochemical sensors developed previously, the proposed electrode results in improved detection limits of about one order of magnitude for α‐NAP (0.23 nM ) and three orders of magnitude for β ‐NAP (0.37 nM ).     

Catalytic Activity of Microbially‐formed Palladium Nanoparticles

The catalytic behavior of microbially‐formed palladium nanoparticles using Clostridium pasteurianum BC1 is reported. To our knowledge, this is the first study that evaluates the electrochemical catalytic activity of microbially‐formed palladium nanoparticles. Pd nanoparticles formed using immobilized microbes were found to exhibit an average mass activity of 177 mA mg⁻¹ which was almost twice the activity of the abiotically formed controls (94 mA mg⁻¹). The results of this study aim to support the use of nanoparticles formed using facile and environmentally‐friendly microbial synthesis methods as a suitable alternative as opposed to standard physical and chemical synthesis methods.     

Au Nanoparticles Modified with Pt,Ru and SnO2 as Electrocatalysts for Ethanol Oxidation Reaction in Acids

The anodic reaction in direct ethanol fuel cells (DEFCs), ethanol oxidation reaction (EOR) faces challenges, such as incomplete electrooxidation of ethanol and high cost of the most efficient electrocatalyst, Pt in acidic media at low temperature. In this study, core‐shell electrocatalysts with an Au core and Pt‐based shell (Au@Pt) are developed. The Au core size and Pt shell thickness play an important role in the EOR activity. The Au size of 2.8 nm and one layer of Pt provide the most optimized performance, having 6 times higher peak current density in contrast to commercial Pt/C. SnO₂ as a support also enhances the EOR activity of Au@Pt by 1.73 times. Further modifying the Pt shell with Ru atoms achieve the highest EOR current density that is 15 and 2.5 times of Pt/C and Au@Pt. Our results suggest the importance of surface modification in rational design of advanced electrocatalysts.     

SnO_2纳米棒负载Pd-Cu空心球催化剂的制备及其对乙醇氧化电催化性能研究

本文通过简单溶剂热反应合成棒状SnO2,然后以谷氨酸为添加剂,乙二醇为分散剂和还原剂,溶剂热合成SnO2纳米棒负载的Pd-Cu球形空壳催化剂.透射电镜结果表明Pd-Cu空心球粒径大约100 nm,并且分布均匀.电化学测试结果表明,该催化剂对乙醇氧化表现出较高的电催化活性和稳定性,其中电流密度可达119.4 mA cm?2,研究表明,合适的金属氧化物的引入可使催化剂释放更多的活性位点从而提高催化剂的电催化活性.     

Nanocomposites of Polyaniline/Poly(2‐methoxyaniline‐5‐sulfonic acid)

Summary: Poly(2‐methoxyaniline‐5‐sulfonic acid) (PMAS) is a water‐soluble derivative of polyaniline that carries negatively charged sulfonate groups. This self‐doped conducting polymer also behaves like a polyelectrolyte that can subsequently function as a dopant in polyaniline (PAn). The chemical synthesis of PAn/PMAS is presented describing the preparation of a highly stable composite dispersion. TEM images reveal a mixture of well‐defined nanofibres and nanoparticles with diameters between 20 and 100 nm. The UV‐vis spectra of the PAn/PMAS composite in water and in alkaline media indicate that both PAn and PMAS are present in the composite. Electrochemical studies show that both of the conducting polymer components are capable of undergoing oxidation and reduction. The novel PAn/PMAS nanocomposite has enhanced electrical conductivity and stability compared to PAn/HCl nanofibres prepared under equivalent conditions, making it a promising material for applications in areas such as batteries, electronic textiles, electrochromics, and chemical sensors.

Transmission electron micrograph of a PAn/PMAS nanocomposite.     

Morphology‐controlled Fabrication of SnO2/ZnO Nanocomposites with Enhanced Photocatalytic Performance

In this work, a series of novel SnO₂/ZnO nanocomposites with different morphologies were fabricated via a facile hydrothermal technique followed by calcination in air. The morphological, structural and photocatalytic properties of the SnO₂/ZnO nanocomposites were studied using different methods. The results showed that the synthesized nanocomposites possessed crystal phases of wurtzite hexagonal phase ZnO and tetragonal rutile phase SnO₂. In addition, the morphologies of SnO₂/ZnO nanocomposites strongly depended on the molar ratios of Sn and Zn. Compared with ZnO and SnO₂, the SnO₂/ZnO nanocomposites exhibited considerably higher degradation efficiency for the photodegradation of methylene blue and quinolone antibiotics under mercury lamp irradiation. The SZ‐2 nanospheres exhibited the highest degradation efficiency of 95.81%, which was about 2.63 times higher than that of ZnO nanoparticles. Moreover, the trapping experiments confirmed that ˙OH played the dominant role in MB degradation. Finally, the charge carriers potential transfer pathway and photocatalytic degradation mechanism were put forward. This study provides an economical way to prepare hybrid nanocomposites with controlled morphology for practical applications in the photocatalytic degradation of organic dyes and residual antibiotics.     

Synthesis of Biphasic Defective TiO2-x/Reduced Graphene Oxide Nanocomposites with Highly Enhanced Photocatalytic Activity

Biphasic defective TiO_2-x/reduced graphene oxide(RGO) nanocomposites were synthesized by simple hydrothermal reactions. Compared with TiO_2-x and commercial P25, TiO_2-x/RGO shows much better photocatalytic activity and excellent stability in pollutants degradation, which could be ascribed to Ti³⁺ centers complexed with RGO and the synergetic effect between the two phases. The study reveals a new route for the synthesis of mixed-phase defective TiO_2-x/carbon material nanocomposites for photocatalytic applications.     

Preparation of FePd‐RGO Bimetallic Composites with High Catalytic Activity for Formic Acid Electro‐Oxidation

FePd‐RGO composites through the growth of uniformly dispersed iron‐palladium bimetallic nanoparticles (NPs) on reduced graphene oxide (RGO) nanosheets were prepared by a two‐step method. The firstly formed Fe is used as the seed for the subsequent Pd growth. The formation of Fe NPs on RGO in the first step is performed by an in‐situ reduction reaction with the reducer ethylene glycol under oil bath at 180°C. NPs in the as‐prepared FePd‐RGO have an average particle size of 6.5 nm, and Pd is added to one side of Fe which leads to the formation of Fe‐Pd bimetallic interfaces. As compared with the commercial Pd black at the same loading, the composites have higher electro‐catalytic activity, better electrochemical stability and higher resistance to CO poisoning for formic acid electro‐oxidation.     

Size‐Controllable Synthesis of Trimetallic RhPdPt Island‐Shaped Nanoalloys with Enhanced Electrocatalytic Performance for Ethanol Oxidation in Alkaline Medium

Size‐controllable, high‐yield, island‐shaped RhPdPt trimetallic nanocrystals with sub‐2.0 nm islands have been successfully synthesized through a facile aqueous solution approach. The results of X‐ray diffraction (XRD), energy‐dispersive X‐ray (EDX) line scanning and elemental mapping analysis showed the as‐synthesized RhPdPt nanocrystals are alloy structures. These island‐shaped RhPdPt trimetallic nanoalloys showed a composition‐dependent electrocatalytic performance for ethanol oxidation in alkaline medium. Due to the special structure and intermetallic synergies, the Rh₁₀Pd₄₀Pt₅₀ nanoalloys exhibited an enhanced catalytic activity and durability relative to island‐shaped Pd₅₀Pt₅₀ bimetallic nanoalloys and commercial Pt black. The peak current density for Rh₁₀Pd₄₀Pt₅₀ nanoalloys was 1.81 and 1.38 times that for commercial Pt black and Pd₅₀Pt₅₀ nanoalloys, respectively. In addition, the peak potential on Rh₁₀Pd₄₀Pt₅₀ nanoalloys decreased 42 mV relative to commercial Pt black and Pd₅₀Pt₅₀ nanoalloys.     

Aerosol‐Assisted Synthesis of Porous TiNxOy@C Nanocomposites

Porous TiN_xO_y‐based particles were synthesized by an aerosol spray process. At first, the starting sol solution containing the metal precursor and the nitrogen source is sprayed to form an aerosol that is subsequently pyrolysed at different temperatures. The obtained dried particles are an amorphous coordination “polymer” rich in carbon and nitrogen. These “glassy” particles are finally thermally treated at 800 °C, promoting the crystallization of the particles and the release of a major part of the carbon. As the particles keep their original shape, carbon loss and density increase during the crystallization step and lead to the development of an accessible pore structure. The process was analyzed and extended to the synthesis of other metal nitrides, such as VN and W₂N, thereby showing its general validity for the production of functional nanocrystalline nitride ceramics with high porosity still occupying a relatively small volume, and otherwise not easily accessible.