Solid Supramolecular Architecture of a Perylene Diimide Derivative for Fluorescent Enhancement

A new p‐phenylenevinylene‐linked perylene diimide has been synthesized and self‐assembled for the formation of zero‐dimensional molecular aggregate structures of nanospheres and vesicles through solvent tuning. The solid‐state optical properties induced by a special wavelength laser were studied and the results indicated excellent fluorescent enhancement properties. The emission intensity of these aggregates increased with elongation of the laser irradiation time. Based on the analysis of variable‐temperature ¹H NMR spectra, DFT calculations, and the single‐crystal structure of the linkage group, a conformation‐dependent fluorescent enhancement mechanism could be demonstrated. The mechanism is different from the fluorescent bleaching of normal solid‐state fluorescent materials and offers potential applications in optical devices.     

A Perylene Bisimide Cyclophane as a “Turn‐On” and “Turn‐Off” Fluorescence Probe

A rigid, covalently linked perylene‐3,4:9,10‐tetracarboxylic acid bisimide (PBI) cyclophane was synthesized by imidization of a bay‐substituted perylene bisanhydride with p‐xylylenediamine. The interchromophoric distance of approximately 6.5 Å establishes an ideal rigid cavity for the encapsulation of large aromatic compounds such as perylene and anthracene with binding constants up to 4.6×10⁴ M ^?1 (in CHCl₃). For electron‐poor guest molecules, the complexation process is accompanied by a significantly increased fluorescence, whereas the emission intensity is dramatically quenched by more electron‐rich guests because of the formation of charge‐transfer complexes. Furthermore, the influence of the PBI core twist on the binding constant results in a remarkable selectivity towards more flexible aromatic guest molecules.     

Ultrahigh Energy Density Realized by a Single‐Layer β‐Co(OH)2 All‐Solid‐State Asymmetric Supercapacitor

A conceptually new all‐solid‐state asymmetric supercapacitor based on atomically thin sheets is presented which offers the opportunity to optimize supercapacitor properties on an atomic level. As a prototype, β‐Co(OH)₂ single layers with five‐atoms layer thickness were synthesized through an oriented‐attachment strategy. The increased density‐of‐states and 100 % exposed hydrogen atoms endow the β‐Co(OH)₂ single‐layers‐based electrode with a large capacitance of 2028 F g^?1. The corresponding all‐solid‐state asymmetric supercapacitor achieves a high cell voltage of 1.8 V and an exceptional energy density of 98.9 Wh kg^?1 at an ultrahigh power density of 17 981 W kg^?1. Also, this integrated nanodevice exhibits excellent cyclability with 93.2 % capacitance retention after 10 000 cycles, holding great promise for constructing high‐energy storage nanodevices.     

A single‐layer approach to electrochromic materials

This study is focused on the development of electrochromic (EC) materials that could be incorporated into electrically‐driven switchable devices such as electrochromogenic glasses. The ultimate goal of this research is to depart from the complexity of the EC device construction which is in use today. Such construction consists of three layers each of them incorporating a specific functionality: the electrochromophore, the electrolyte and the ion storage, assembled between two transparent or reflective electrodes. In most of these conventional devices the electrolyte layer is a liquid or a gel. Since solid‐state EC devices are of high commercial interest, we are exploring various avenues to reduce the number of layers to one layer that is all‐solid and electrochromically/electrolytically and ionically functional. The design strategy is based on the use of polymers such as poly(epichlorohydrin‐co‐ethylene oxide), poly(vinyl butyral) and poly(ethylene‐co‐methacrylic acid) ionomer, to which EC properties were introduced by grafting reactions with specifically synthesized carbazole derivatives. A combination of analytical techniques was used to characterize the monomers and the carbazole‐grafted polymers. A proof of concept was demonstrated for a single‐layer, all‐solid‐state EC device consisting of a film of poly(ECH‐co‐EO) containing pendent carbazole groups, assembled between two transparent electrodes, Sn‐doped In₂O₃ oxide‐coated glasses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Pendant perylene polymers with high electron mobility

Four different perylene side‐chain semiconductor polymers, synthesized by a combination of “click” chemistry and nitroxide‐mediated radical polymerization, are compared in terms of their optical, electrochemical, and charge transport properties. The nature of the solubilizing side chains and the chromophoric π‐conjugation system of the pendant perylene moieties are systematically changed. Two poly(perylene bisimide)s with hydrophobic (PPBI 1) and hydrophilic substituents (PPBI 2) are compared with poly(perylene diester benzimidazole) (PPDEB) and poly(perylene diester imide) (PPDEI). Optical properties are investigated by UV/vis and photoluminescence spectroscopy, and charge transport is studied by organic field effect transistor and space‐charge‐limited current measurements. Cyclic voltammetry is used to estimate highest occupied molecular orbital and lowest unoccupied molecular orbital levels. The extended π‐conjugation system of PPDEB leads to a broader absorption in the visible region when compared with PPDEI and the PPBIs. Although absorption properties of PPDEB could be considerably improved by varying the perylene core, the charge carrier mobility could be drastically improved by tuning the substituents. Very high electron mobilities of 1 × 10^?2 cm² V^?1 s^?1 were achieved for PPBI 2 carrying oligoethyleneglycol substituents. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1480–1486     

Highly Soluble Porphyrin (TPP)-Perylene Diimide (PDI) Dyad and Triad:Synthesis and Spectroscopic Studies

Novel porphyrin‐perylene diimide dyad (TPP‐PDI) and porphyrin‐perylene diimide‐porphyrin triad (TPP‐PDI‐TPP) were synthesized and characterized. Their structure and properties were studied by UV, FL, ¹H NMR, MS, elemental analysis, etc. The variation of fluorescence feature and UV spectra of TPP‐PDI‐TPP triad were investigated at different concentration of CF₃COOH in THF. The incorporation of CF₃COOH leads to the closure of the efficient charge transfer decay. After protonation of porphyrin units, the fluorescence intensity of TPP‐PDI‐TPP triad increased greatly. The fluorescence intensity of TPP‐PDI‐TPP triad restored after addition of triethylamine into the solution. Thus, TPP‐PDI‐TPP triad was a proton‐type fluorescence switch based on acid‐base control. Moreover, different from porphyrin‐perylene type molecular switches reported before, this TPP‐PDI‐TPP triad has wonderful solubility in organic solvents.     

Membrane‐Anchoring Photosensitizer with Aggregation‐Induced Emission Characteristics for Combating Multidrug‐Resistant Bacteria

Traditional photosensitizers (PSs) show reduced singlet oxygen (¹O₂) production and quenched fluorescence upon aggregation in aqueous media, which greatly affect their efficiency in photodynamic therapy (PDT). Meanwhile, non‐targeting PSs generally yield low efficiency in antibacterial performance due to their short lifetimes and small effective working radii. Herein, a water‐dispersible membrane anchor (TBD‐anchor) PS with aggregation‐induced emission is designed and synthesized to generate ¹O₂ on the bacterial membrane. TBD‐anchor showed efficient antibacterial performance towards both Gram‐negative (Escherichia coli) and Gram‐positive bacteria (Staphylococcus aureus). Over 99.8 % killing efficiency was obtained for methicillin‐resistant S. aureus (MRSA) when they were exposed to 0.8 μm of TBD‐anchor at a low white light dose (25 mW cm^?2) for 10 minutes. TBD‐anchor thus shows great promise as an effective antimicrobial agent to combat the menace of multidrug‐resistant bacteria.     

Perylene Bisimide Radicals and Biradicals: Synthesis and Molecular Properties

Unprecedented neutral perylene‐3,4:9,10‐tetracarboxylic acid bisimide (PBI) radicals and biradicals were synthesized by facile chemical oxidation of 4‐hydroxyaryl‐substituted PBIs. Subsequent characterization by optical and magnetic spectroscopic techniques, as well as quantum chemical calculations, revealed an open‐shell singlet biradical ground state for the PBI biradical OS ‐ 2^.. (〈s²〉=1.2191) with a relatively small singlet–triplet energy gap of 0.041 eV and a large singlet biradical character of y=0.72.     

Perylene polyphenylmethylsiloxanes for optoelectronic applications

The incorporation of fluorescent organic dyes in an encapsulating matrix represents a route to generate stable and processable materials for optoelectronic devices. Here, we present a method to embed perylene dyes into a high refractive index (HRI) polysiloxane matrix applying an allyl functionalized perylene dye and hydrosilylation chemistry. In a first approach, the dye molecules were covalently integrated into the backbone of linear polyphenylmethylsiloxane chains. The fluorescent and liquid polymers were synthesized with molecular weights from 5660 up to 8400 g mol^?1. In a second approach, the dye itself was used as a cross‐linking agent between linear polyphenylmethylsiloxane chains. These preformed fluorescent batch polymers are liquids with dye concentrations between 0.025 and 8 wt %. The applied synthetic methods incorporated the dye covalently into the polymer structure and avoided the crystallization of the dye molecules and thus the formation of excimers, which would reduce the optical emission. The resulting products can be easily incorporated into curable commercially available HRI polyphenylmethylsiloxane resins. The formed materials are ideal LED encapsulants with a solid and flexible consistency, a uniform dispersion of the dyes, and adjustable mechanical properties, realized by changing the amount of perylene polymers. Further properties of the obtained materials are thermal stabilities up to 478 °C, quantum yields larger than 0.97, and high photostabilities. Thus, the covalent integration of dyes into polyphenylsiloxane structures represents a possible route for the stabilization of the organic dyes against the extreme irradiance and thermal conditions in LED applications. © 2019 The Authors. Journal of Polymer Science Part B: Polymer Physics published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1062–1073     

Highly Efficient Dye‐Sensitized Solar Cells Based on Panchromatic Ruthenium Sensitizers with Quinolinylbipyridine Anchors

Panchromatic Ru^II sensitizers TF‐30–TF‐33 bearing a new class of 6‐quinolin‐8‐yl‐2,2′‐bipyridine anchor were synthesized and tested under AM1.5 G simulated solar irradiation. Their increased π conjugation relative to that of the traditional 2,2′:6′,2′′‐terpyridine‐based anchor led to a remarkable improvement in absorptivity across the whole UV–Vis–NIR spectral regime. Furthermore, the introduction of a bulky tert‐butyl substituent on the quinolinyl fragment not only led to an increase in the J_SC value owing to the suppression of dye aggregation, but remarkably also resulted in no loss in V_OC in comparison with the reference sensitizer containing a tricarboxyterpyridine anchor. The champion sensitizer in DSC devices was found to be TF‐32 with a performance of J_SC=19.2 mA cm^?2, V_OC=740 mV, FF=0.72, and η=10.19 %. This 6‐quinolin‐8‐yl‐2,2′‐bipyridine anchor thus serves as a prototype for the next generation of Ru^II sensitizers with any tridentate ancillary.     

Synthesis,properties, and sulfonation of novel dendritic multiblock copoly(ether‐sulfone)

Multiblock copoly(ether‐sulfone)s ( PES s) bearing anchor units for the construction of dendritic blocks were synthesized by two‐step reactions: (1) synthesis of PES block with both phenoxide end‐groups; (2) chain extension and end‐capping of the block by use of excess novel hexafunctional agent, hexakis(4‐(4‐fluorophenylsulfonyl)phenyl)benzene. The optimum average block length (n) and amount (x) of the hexafunctional agent used for the synthesis of high‐molecular‐weight PES without crosslinking were n = 26 and x = 2.6 equiv, respectively. The dendritic blocks in the PES were constructed by the aromatic nucleophilic substitution reaction of the activated aromatic fluoride groups on the anchor units using 4‐tritylbenzenethiol. The clean substitution of the fluoride groups in the PES was confirmed by ¹H NMR and ¹⁹F NMR. Three sulfonic acid groups were introduced on the pendant phenyl rings of the trityl groups in the PES by the reaction with chlorosulfonic acid. This is the first example of a dendritic PES bearing clusters of sulfonic acid groups only on the dendritic blocks. Cast films of presulfonated dendritic PES were strong and flexible, however, the membranes of sulfonated dendritic PES were brittle so that the conductivity measurements were not performed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6365–6375, 2008     

Synthesis and Solid State Properties of Novel Fluorescent Polyester Star Polymers

Two novel tetra‐ and hexahydroxy functionalized perylene chromophores have been used as initiators for the Sn(oct)₂ catalyzed ring‐opening polymerization of different lactones. The arms of the resulting star polymers were comprised of either crystallizable poly(L ‐lactide) or poly(ε‐caprolactone) arms or of amorphous poly[γ‐(tert‐amyl)‐ε‐caprolactone] chains. The star polymers were investigated by differential scanning calorimetry, X‐ray scattering and dynamic mechanical and optical spectroscopy. Whereas the thermal properties of the poly(ε‐caprolactone) stars were barely affected by the star topology, crystallization of the poly(L ‐lactide) stars was strongly hindered by the star‐shaped architecture. Interestingly, for the amorphous poly[γ‐(tert‐amyl)‐ε‐caprolactone] stars a decrease in T_g with increasing chain length was found, reflecting the declining influence of the rigid perylene core on segmental mobility with increasing arm length. While the solid state and solution optical properties of high molar mass polyester stars were identical, the excitation and fluorescence emission spectra of spin‐coated films of the low molecular weight polymers revealed a red shift, pointing towards perylene – perylene interactions in these samples. The optical spectroscopy experiments suggested that arm length, rather than the number of arms, is the most important parameter determining encapsulation and preventing aggregation of the perylene core moieties in the solid state.

     

1,6‐Dinitroperylene Bisimide Dyes: Synthesis,Characterization and Photophysical Properties

1,6‐ and 1,7‐regioisomers of dinitro‐substituted perylene bisimides ( 1a — 1b and 2a — 2b ) were synthesized under mild condition in high yields. The 1,6‐ and 1,7‐regioisomers were successfully isolated from the regioisomeric mixture using conventional methods of separation and subsequently characterized by 500 MHz ¹H NMR spectroscopy. This is the first time when 1,6‐dinitroperylene bisimides ( 1a — 1b ) are obtained in pure form. Furthermore, the photophysical and electrochemical properties of 1 and 2 were found to be almost the same. The nitro functionalities provide stability of n‐type charge carriers by lowering the LUMO to resist ambient oxidation, which may offer potential applications in air‐stable n‐type organic semiconductors.     

para‐Quinodimethane‐Bridged Perylene Dimers and Pericondensed Quaterrylenes: The Effect of the Fusion Mode on the Ground States and Physical Properties

Polycyclic hydrocarbon compounds with a singlet biradical ground state show unique physical properties and promising material applications; therefore, it is important to understand the fundamental structure/biradical character/physical properties relationships. In this study, para‐quinodimethane (p‐QDM)‐bridged quinoidal perylene dimers 4 and 5 with different fusion modes and their corresponding aromatic counterparts, the pericondensed quaterrylenes 6 and 7 , were synthesized. Their ground‐state electronic structures and physical properties were studied by using various experiments assisted with DFT calculations. The proaromatic p‐QDM‐bridged perylene monoimide dimer 4 has a singlet biradical ground state with a small singlet/triplet energy gap (?2.97 kcal mol^?1), whereas the antiaromatic s‐indacene‐bridged N‐annulated perylene dimer 5 exists as a closed‐shell quinoid with an obvious intramolecular charge‐transfer character. Both of these dimers showed shorter singlet excited‐state lifetimes, larger two‐photon‐absorption cross sections, and smaller energy gaps than the corresponding aromatic quaterrylene derivatives 6 and 7 , respectively. Our studies revealed how the fusion mode and aromaticity affect the ground state and, consequently, the photophysical properties and electronic properties of a series of extended polycyclic hydrocarbon compounds.     

Synthesis and characterization of highly soluble fluorescent main chain copolyimides containing perylene units

A series of high molecular weight copolyimides containing various amount of perylene units in the main chain have been synthesized. The polymers were characterized by FT-IR, NMR, UV/Vis, fluorescence spectroscopy, gel permeation chromatography, differential scanning calorimetry and thermogravimetric analysis measurements. They are highly soluble in conventional solvents such as CHCl₃, THF, cyclohexanone etc. and form optically transparent films by solution casting or spin coating. The incorporation of various amount of perylene units in the main chain allows the control of the fluorescence intensity in solution and in solid thin films. The copolyimide containing 0.28 mol% perylene units exhibits the highest solid-state fluorescence. The observed fluorescence intensities of the copolyimides in solid state film decreased with the increasing amount of perylene units in the main chain when the mole ratio of perylene units greater than 0.28 mol% indicating the aggregation of chromophores. The copolyimides are thermally stable up to 400 °C and exhibit glass transition temperatures in the range of 340-360 °C. The number average molecule weight ranges from 1.72×10⁴ to 1.25×10⁵ and the molecule weight distribution mediated between 1.9 and 2.4.     

Computationally Driven Discovery of a Family of Layered LiNiB Polymorphs

Two novel lithium nickel boride polymorphs, RT‐LiNiB and HT‐LiNiB, with layered crystal structures are reported. This family of compounds was theoretically predicted by using the adaptive genetic algorithm (AGA) and subsequently synthesized by a hydride route with LiH as the lithium source. Unique among the known ternary transition‐metal borides, the LiNiB structures feature Li layers alternating with nearly planar [NiB] layers composed of Ni hexagonal rings with a B–B pair at the center. A comprehensive study using a combination of single crystal/synchrotron powder X‐ray diffraction, solid‐state ⁷Li and ¹¹B NMR spectroscopy, scanning transmission electron microscopy, quantum‐chemical calculations, and magnetism has shed light on the intrinsic features of these polymorphic compounds. The unique layered structures of LiNiB compounds make them ultimate precursors for exfoliation studies, thus paving a way toward two‐dimensional transition‐metal borides, MBenes.     

Synthesis and Structure of Monomeric,Trimeric, and Mixed Phenylcyanamides

In a new synthetic approach phenylcyanamide (Hpca) was synthesized by methylation of phenylthiourea followed by a basic work‐up. All products along the synthetic route have been fully characterized by means of NMR, IR, and X‐ray studies. The first structural report of neutral mixed crystals of phenylcyanamide containing monomeric and trimeric Hpca is presented. Examination of these intriguing mixed crystals revealed the formation of distinct layers of monomeric and trimeric Hpca. These layers are interconnected by weak hydrogen bonds. The trimer represents triphenylisomelamine, which readily isomerizes to the triphenylmelamine in the melt, in accord with computations at the B3LYP level, indicating an exothermic process (ΔH=?49.4 kcal mol^?1). Pure trimeric Hpca (triphenylisomelamine) was obtained either by recrystallization of the mixed crystals from boiling water or by trimerization of monomeric Hpca in isopropanol for 12 h under reflux conditions. For comparison tritylcyanamide (Htca) and potassium phenylcyanamide as an [18]crown‐6 complex [K([18]crown‐6)pca] have been synthesized, and the solid‐state structures were determined using X‐ray diffraction techniques. The thermal behavior was studied by thermo‐analytical experiments. In agreement with the experimental results, computations predict an exothermic cyclotrimerization process for Hpca (ΔH=?41.3 kcal mol^?1).     

Synthesis and properties of nitrogen‐linked poly(2,7‐carbazole)s as hole‐transport material for organic light emitting diodes

A novel class of carbazole polymers, nitrogen‐linked poly(2,7‐carbazole)s, was synthesized by polycondensation between two bifunctional monomers using the palladium‐catalyzed amination reaction. The polymers were characterized by ¹H NMR, Infrared, Gel permeation chromatography, and MALDI‐TOF MS and it was revealed that the combination of the monomer structures is important for producing high molecular weight polymers. Thermal analysis indicated a good thermal stability with high glass transition temperatures, e.g., 138 °C for the higher molecular weight polymer P2 . To pursue the application possibilities of these polymers, their optical properties and energy levels were investigated by UV‐Vis absorption and fluorescence spectra as well as their electrochemical characteristics. Although the blue light emission was indeed observed for all polymers in solution, the quantum yields were very low and the solid films were not fluorescent. On the other hand, the HOMO levels of the polymers estimated from the onset potentials for the first oxidation in the solid thin films were relatively high in the range of ?5.12 to ?5.20 eV. Therefore, light emitting diodes employing these polymers as a hole‐transport layer and iridium(III) complex as a triplet emitter were fabricated. The device of the nitrogen‐linked poly(2,7‐carbazole) P3 with p,p′‐biphenyl spacer, which has a higher HOMO level and a higher molecular weight, showed a much better performance than the device of P2 with m‐phenylene spacer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3880–3891, 2009     

C−H Direct Arylated 6H‐Indolo[2,3‐b]quinoxaline Derivative as a Thickness‐Dependent Hole‐Injection Layer

A novel perfluoro‐1,4‐phenylenyl 6H ‐indolo[2,3‐b ]quinoxaline derivative ( TFBIQ ) was designed and synthesized by using a C−H direct arylation method. The optoelectrical properties of the obtained TFBIQ were fully characterized by UV/Vis spectroscopy, photoluminescence spectroscopy, cyclic voltammetry, and a group of Alq₃‐based green organic light‐emitting diodes (OLEDs). Device A, which used 0.5 nm‐thick TFBIQ as the interfacial modification layer, exhibited the five best advantages of device performance including a minimum turn‐on voltage as low as 3.1 V, a maximum luminescence intensity as high as 26564 cd m⁻², a highest current density value of 348.9 mA cm⁻² at a voltage of 11 V, the smallest efficiency roll‐off, as well as the greatest power efficiency of 1.46 lm W⁻¹ relative to all of the other tested devices with thicker TFBIQ and also 10 nm‐thick MoO₃ as hole‐injection layers (HILs). As a promising candidate for an organic HIL material, the as‐prepared TFBIQ exhibited a strong thickness effect on the performance of corresponding OLEDs. Furthermore, the theoretical calculated vertical ionization potential of the fluorinated TFBIQ suggests better anti‐oxidation stability than that of the non‐fluorinated structure.     

Synthesis,Characterization, Electronic and Gas‐Sensing Properties towards H2 and CO of Transparent,Large‐Area,Low‐Layer Graphene

Low‐layered, transparent graphene is accessible by a chemical vapor deposition (CVD) technique on a Ni‐catalyst layer, which is deposited on a <100> silicon substrate. The number of graphene layers on the substrate is controlled by the grain boundaries in the Ni‐catalyst layer and can be studied by micro Raman analysis. Electrical studies showed a sheet resistance (R_sheet) of approximately 1435 Ω per □, a contact resistance (R_c) of about 127 Ω, and a specific contact resistance (R_sc) of approximately 2.8×10^?4 Ω cm² for the CVD graphene samples. Transistor output characteristics for the graphene sample demonstrated linear current/voltage behavior. A current versus voltage (I_ds–V_ds) plot clearly indicates a p‐conducting characteristic of the synthesized graphene. Gas‐sensor measurements revealed a high sensor activity of the low‐layer graphene material towards H₂ and CO. At 300 °C, a sensor response of approximately 29 towards low H₂ concentrations (1 vol %) was observed, which is by a factor of four higher than recently reported.