Response to the “Comment on Chemical and Toxicological Investigations of a Previously Unknown Poisonous European Mushroom Tricholoma terreum”

Recently, Dr. Paolo Davoli and his colleagues stated that the conclusions drawn by us were misleading from a mycotoxicological perspective, as they cast doubts on the edibility of a mushroom species (Tricholoma terreum) that has been always recognized as safe. Unfortunately, they made a mistake, and seriously misinterpreted our data, which resulted in scepticism of our research. Saponaceolides B and M were tested for their stabilities heating directly on and boiling in water. It is undoubted that both saponaceolides B and M are capable of withstanding prolonged heating during cooking.     

Chemical and Toxicological Investigations of a Previously Unknown Poisonous European Mushroom Tricholoma terreum

The established tradition of consuming and marketing wild mushrooms has focused attention on mycotoxicity, which has become a global issue. In the present study, we describe the toxins found in a previously unknown poisonous European mushroom Tricholoma terreum. Fifteen new triterpenoids terreolides A–F ( 1 – 6 ) and saponaceolides H–P ( 8 – 16 ) were isolated from the fruiting bodies of the toxic mushroom T. terreum. Terreolides A–C ( 1 – 3 ) possessed a unique 5/6/7 trioxaspiroketal system, whereas terreolides D–F ( 4 – 6 ) possessed an unprecedented carbon skeleton. Two abundant compounds in the mushroom, saponaceolide B ( 7 ) and saponaceolide M ( 13 ), displayed acute toxicity, with LD₅₀ values of 88.3 and 63.7 mg kg^?1 when administered orally in mice. Both compounds were found to increase serum creatine kinase levels in mice, indicating that T. terreum may be the cause of mushroom poisoning ultimately leading to rhabdomyolysis.     

Enantioselective Total Synthesis of Terreumols A and C from the Mushroom Tricholoma terreum

The cytotoxic meroterpenoids terreumol A and C from the grey knight mushroom Tricholoma terreum were synthesized for the first time. The key step of the enantioselective total synthesis of terreumol C is a ring‐closing metathesis to form a trisubstituted Z double bond embedded in the 10‐membered ring of the [8.4.0] bicycle. Interestingly, the presence of a free hydroxy group in the metathesis precursor prevents cyclization and favors cross metathesis. (?)‐Terreumol C was converted into (?)‐terreumol A by diastereoselective epoxidation. Starting from 2‐bromo‐3,5‐dimethoxybenzaldehyde, 14 steps with an overall yield of 23 % are needed for the synthesis of (?)‐terreumol A. X‐ray analysis of the benzoquinone analogue of terreumol A provides independent proof of the absolute configuration.     

Accumulation of radiocesium by <Emphasis Type="Italic">Pleurotus citrinopileatus</Emphasis> species of edible mushroom

Pleurotus citrinopileatus, a species of edible mushrooms, is widely accepted food component, especially in Indian subcontinent. The accumulating susceptibility of this edible mushroom species towards long-lived radioisotopes of cesium was studied in controlled laboratory condition using the ¹³⁴Cs (T _1/2 = 2.06 y) radioisotope. It was observed that the experimental mushroom species accumulated ¹³⁴Cs and maximum accumulation took place in the cap portion. The pileus (cap)/stipes (stem) ratio of each ¹³⁴Cs accumulated mushroom sample was determined and found 2.22±0.74. The protein and fat fractions of the experimental mushroom species were extracted separately after accumulation of radiocesium and it was found that most of the radiocesium accumulation occurred in the protein fraction of the mushroom. The mushroom Pleurotus citrinopileatus which is white in color, turned completely black after radiocesium accumulation. The black mushroom so obtained was produced upto fourth generation by tissue culture method without using any radiocesium further. All the successors were found to be black indicating a permanent mutation of the mushroom species.     

Solvent crazing of “dry” polystyrene and “dry” crazing of plasticized polystyrene

The critical strain ε_c for crazing of polystyrene in each of a variety of organic liquids has been measured along with the degree of swelling of the polymer by the liquid and the attendant reduction in the glass transition temperature T_g of the polymer. The critical strain for the crazing in air and the T_g of each of a set of specimens molded from mixtures of o-dichlorobenzene and polystyrene have also been determined. Correlations of ε_c with T_g in the two cases are identical within experimental error for the first 40°C of T_g reduction; these results imply (1) that organic liquids do not exercise a significant surface energy role in solvent crazing and (2) that their only roles are associated with flow processes. Correlation of solvent crazing ε_c with solubility parameter of the crazing fluid is very poor for several reasons that are discussed.     

Enzyme Modification and Oxidative Cross‐linking Using Carboxylate‐, Phenol‐ and Catechol‐Conjugated 1,8‐Naphthalimides

The ground‐ and excited‐state interactions of β‐alanine, tyrosine and l ‐dopa substituted 1,8 naphthalimides (NI‐Ala, NI‐Tyr and NI‐Dopa) with lysozyme and mushroom tyrosinase were evaluated to understand the mechanism of oxidative modification. Photooxidative cross‐linking of lysozyme was observed for all three conjugates. The yield was significantly reduced for NI‐Tyr and NI‐Dopa due to intramolecular electron transfer to the excited singlet state of the 1,8‐naphthalimide. Incubation of NI‐Tyr and NI‐Dopa with mushroom tyrosinase resulted in an increased fluorescence from the naphthalimide, suggesting that the phenol and catechol portion of the conjugates are oxidized by the enzyme. This result demonstrates that the compounds bind in the active site of mushroom tyrosinase. The catalytic activity of mushroom tyrosinase to oxidize both tyrosine (monophenolase) and l ‐dopa (diphenolase) was modified by NI‐Tyr and NI‐Dopa. Monophenolase activity was inhibited, and the diphenolase activity was enhanced in the presence of these conjugates. Detailed Michaelis–Menten studies show that both V_max and K_m are modified, consistent with a mixed inhibition mechanism. Collectively, the results show that the compounds interact in the enzyme's active site, but also modify the distribution of the enzyme's oxidation states that are responsible for catalysis.     

The geographical origin and chemical composition in <Emphasis Type="Italic">phellinus</Emphasis> mushrooms measured by instrumental neutron activation analysis

In order to expand the utilization of phellinus mushrooms as a dietary supplement, we attempted to evaluate the chemical composition by measuring its inorganic elemental content with the aid of instrumental neutron activation analysis (INAA). Twenty seven phellinus mushrooms samples were collected from Korea, Cambodia, and Vietnam. A total of 28 elements were analyzed in the phellinus mushroom samples using the INAA. The concentrations of Ca, K, and Mg are much higher than those of other elements in phellinus mushroom samples. The sum of determined elemental concentration in Cambodia samples was about 2–6 times higher than those in Korea and Vietnam samples, respectively. Based on our measurement data, we attempted to discriminate the geographical origin using principal components analysis (PCA) and linear discriminant analysis (LDA). The geogrpahical origins of all samples were clearly classified with correct classification rate of 100%.     

Kinetics of the “a” and “b” band emissions of mercury excimers with added gases

The kinetics of the “a” and “b” band emissions arising from the ¹Σ ← ³O_u and ¹Σ ← ³l_u transitions of the diatomic mercury molecule at λ_max ～ 4850 Å and 3350 Å, respectively, have been studied at low concentrations of mercury in the presence of N₂, C₂H₆, C₃H₈, and N₂O. Rate constant values have been obtained for the following reactions of the excimer molecule: Hg₂(³l_u) + N₂ → Hg₂(³O_u) + N₂ and Hg₂(³O_u) + RH → Hg₂(¹Σ) + RH, where RH = C₂H₆ or C₃H₈. From a consideration of the detailed kinetics of band emissions, it was also possible to derive rate constants for the quenching reactions of Hg(³P₀) atoms. These values are in reasonable agreement with those obtained previously from monitoring atom concentrations directly by 4047 Å absorbiometry.     

Photoelectron-spectroscopic Evidence Concerning “Homo-aromaticity”

The first of the two π-bands in the photoelectron spectrum of cis-cis-cis-1, 4, 7-cyclononatriene (I, symmetry C_3v) shows a Jahn-Teller split. This is consistent with the prediction of molecular orbital theory that the top occupied orbitals of I are e (π) and a ₁(π) respectively. From the difference ?( e (π)) - ?( a ₁(π)) = 0.90 to 0.97 eV a value of β_1,3 = ?0.68 eV = 0.27 β (β = -2.5 eV) is obtained for the homoconjugative interaction of two π-orbitals in I. This value represents almost exclusively through-space interaction between the π-orbitals. Through-bond interaction (hyperconjugation) is a minor effect in I. A comparison of the photoelectron data of bicyclo [4.2.1] nonatriene with those of norbornene and cycloheptadiene shows that homoconjugation (homo-aromaticity) can only be detected by photoelectron spectroscopy if the interacting π-bonds (basis orbitals) are symmetry equivalent or have accidentally (almost) degenerate energies.     

Synthesis of arborescent polystyrene by “click” grafting

A method was developed for the synthesis of arborescent polystyrene by “click” coupling. Acetylene functionalities were introduced on linear polystyrene (M_n = 5300 g/mol, M_w/M_n = 1.05) by acetylation and reaction with potassium hydroxide, 18‐crown‐6 and propargyl bromide in toluene. Polymerization of styrene with 6‐tert‐butyldimethylsiloxyhexyllithium yielded polystyrene (M_n = 5200 g/mol, M_w/M_n = 1.09) with a protected hydroxyl chain end. Deprotection, followed by conversions to tosyl and azide functionalities, provided the side chain material. Coupling with CuBr and N,N,N′,N″,N″‐pentamethyldiethylenetriamine proceeded in up to 94% yield. Repetition of the grafting cycles led to well‐defined (M_w/M_n ≤ 1.1) polymers of generations G1 and G2 in 84% and 60% yield, respectively, with M_n and branching functionalities reaching 2.8 × 10⁶ g/mol and 460, respectively, for the G2 polymer. Coupling longer (M_n = 45,000 g/mol) side chains with acetylene‐functionalized substrates was also examined. For a linear substrate, a G0 polymer with M_n = 4.6 × 10⁵ g/mol and M_w/M_n = 1.10 was obtained in 87% yield; coupling with the G0 (M_n = 52,000 g/mol) substrate produced a G1 polymer (M_n = 1.4×10⁶ g/mol, M_w/M_n = 1.38) in 28% yield. The complementary approach using azide‐functionalized substrates and acetylene‐terminated side chains was also investigated, but proceeded in lower yield. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1730–1740     

Decohesion of a rigid punch from an elastic layer: Transition from “flaw sensitive” to “flaw insensitive” regime

A cohesive zone model is used to study the pull‐off of a rigid flat cylindrical punch of radius c from an elastic layer of thickness h. The adhesion between the punch and the elastic layer is assumed to be sufficiently weak so that pull‐off occurs by the growth of a crack from the edge of contact. Our result shows that the pull‐off stress, when normalized by the interfacial strength σ_o, depends on a single dimensionless parameter χ_f = σc(1?v²) g(ξ)/2πEW_ad, where E and v are the Young's modulus and Poisson's ratio of the elastic layer, respectively, W_ad is the work of adhesion, and g(ξ) is a known dimensionless function of ξ ≡ c/h. χ_f can be viewed as a generalized Tabor parameter. It characterizes the transition from a “brittle” or flaw sensitive failure regime to a “ductile” or flaw insensitive regime. The result in this work is used to generalize Maugis' theory of adhesive contact to the case where the elastic substrate is of finite thickness. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3628–3637, 2005     

Block copolymers by transformation of “living” carbocationic into “living” radical polymerization. II. ABA-type block copolymers comprising rubbery polyisobutene middle segment

A general method for the transformation of “living” carbocationic into “living” radical polymerization, without any modification of chain ends, is reported for the preparation of ABA block copolymers. For example, α,ω-difunctional polyisobutene, capped with several units of styrene, Cl-St-PIB-St-Cl, prepared cationically (M_n = 7800, M_w/M_n = 1.31) was used as an efficient difunctional macroinitiator for homogeneous “living” atom transfer radical polymerization to prepare triblock copolymers with styrene, PSt-PIB-PSt (M_n = 28,800, M_w/M_n = 1.14), methyl acrylate, PMA-PIB-PMA (M_n = 31,810, M_w/M_n = 1.42), isobornyl acrylate, PIBA-PIB-PIBA (M_n = 33,500, M_w/M_n = 1.21), and methyl methacrylate, PMMA-PIB-PMMA (M_n = 33,500, M_w/M_n = 1.47). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3595–3601, 1997     

“Complex” versus “free radical” mechanism for the catalytic decomposition of H2O2 by ferric ions

Kinetic and spectrophotometric measurements made during the Fe³⁺ ion catalyzed decomposition of H₂O₂ have been analyzed using the computer simulation method. Improved values of the rate constants of the “complex scheme” and of the molar absorptivities ofthe intermediates were obtained: k₃/K_M = 4.94 M^?1 min^?1, k₄ = 193 M^?1 min^?1, ε_I/K_M = 52.3 M^?2 cm^?1, ε_II = 25.7 M^?1 cm^?1. The simulation revealed details of the reaction which were unavailable by other means and which explained several features of its kinetics. The total amount of O₂ evolved in the reaction using [H₂O₂] ～ 10^?2 M has been calculated and found to be nearly stoichiometric. O₂ evolution experiments in this region cannot, thus, distinguish between the “complex mechanism” predicting nearly stoichiometric evolution of O₂ and the “free radical mechanism” predicting exactly stoichiometricamounts of O₂. There are discrepancies within the “free radical scheme” with regard to the correct values of the rate constants to fit the reactions of H₂O₂ both with Fe²⁺ and Fe³⁺ ions, as well as other reactions assumed to proceed via free radicals.     

A Quantitative Assessment of „Through-space”︁ and „Through-bond”︁ Interactions. Application to Semi-empirical SCF Models

The scheme of ‘through-space’ and ‘through-bond’ interaction of (semi)localized orbitals, originally proposed by Hoffmann, is reexamined in terms of SCF many-electron treatments. It is shown that the two types of interaction can be characterized by examining the corresponding off-diagonal matrix elements of the Hartree-Fock matrices of the localized or the symmetry adapted localized orbitals and of the partially diagonalized Hartree-Fock matrices referring to ‘precanonical orbitals’. The procedure outlined is applied to three practical examples using the semiempirical many-electron treatments SPINDO, MINDO/2 and CNDO/2:

• a A reassessment of ‘through-space’ and ‘through-bond’ interaction in norbornadiene indicates, that the latter type of interaction is also of importance for the orbital based mainly on the antisymmetric combination of the localized x-orbitals. The differences in the predictions derived from the three models are critically examined.
• b The competition between ‘through-space’ and ‘through-bond’ interaction in the series of bicyclic dienes from norbornadiene to bicyclo[4.2.2]-dcca-7,9-diene and in cyclohexa-1,4-diene, i. e. their dependence on the dihedral angle UI is reexamined. It is found that the rationalization for the orbital crossing near ω = 130° deduccd from PE. spectroscopic data can not be as simple as originally suggested and that the relay’ orbitals responsible for ‘through-bond interaction affecting both the symmetric and the antisymmetric combination of the π-orbitals extend over the whole CC-σ-system of the six membered ring.
• c ‘Through-bond’ interaction of the two lone pair orbitals in 1,4-diazabicyclo[2.2.2]octane is found to be large for their symmetric and the antisymmetric linear combination.

The analysis quoted, draws attention to some of the dangers involved in using semiempirical treatments for the interpretation of PE. data in terms of Koopmans′ theorem, without due caution.     

Applications of “Hot” and “Cold” Bis(thiosemicarbazonato) Metal Complexes in Multimodal Imaging

The applications of coordination chemistry to molecular imaging has become a matter of intense research over the past 10 years. In particular, the applications of bis(thiosemicarbazonato) metal complexes in molecular imaging have mainly been focused on compounds with aliphatic backbones due to the in vivo imaging success of hypoxic tumors with PET (positron emission tomography) using ⁶⁴CuATSM [copper (diacetyl‐bis(N4‐methylthiosemicarbazone))]. This compound entered clinical trials in the US and the UK during the first decade of the 21^st century for imaging hypoxia in head and neck tumors. The replacement of the ligand backbone to aromatic groups, coupled with the exocyclic N's functionalization during the synthesis of bis(thiosemicarbazones) opens the possibility to use the corresponding metal complexes as multimodal imaging agents of use, both in vitro for optical detection, and in vivo when radiolabeled with several different metallic species. The greater kinetic stability of acenaphthenequinone bis(thiosemicarbazonato) metal complexes, with respect to that of the corresponding aliphatic ATSM complexes, allows the stabilization of a number of imaging probes, with special interest in “cold” and “hot” Cu(II) and Ga(III) derivatives for PET applications and ¹¹¹In(III) derivatives for SPECT (single‐photon emission computed tomography) applications, whilst Zn(II) derivatives display optical imaging properties in cells, with enhanced fluorescence emission and lifetime with respect to the free ligands. Preliminary studies have shown that gallium‐based acenaphthenequinone bis(thiosemicarbazonato) complexes are also hypoxia selective in vitro, thus increasing the interest in them as new generation imaging agents for in vitro and in vivo applications.     

Speciation of essential and toxic elements in edible mushrooms: size‐exclusion chromatography separation with on‐line UV–inductively coupled plasma mass spectrometry detection

Size‐exclusion liquid chromatography was coupled to UV and inductively coupled plasma mass spectrometry (ICP‐MS) for detection to perform elemental speciation studies on different edible mushrooms. Molecular weight (MW) distribution patterns of several elements among different fractions present in various edible mushrooms are presented. The association of the elements with the high and low MW fractions was observed using sequential detection by UV and ICP‐MS. Separation was performed using a Superdex 75 column. Variability of the fractionation patterns with three different extraction media (0.05 mol l^?1 NaOH; 0.05 mol l^?1 HCl; hot water at 60°C) was evaluated for mushroom species. A comparative elemental speciation study was performed in order to determine the differences in the fractionation patterns of silver, arsenic, cadmium, mercury, lead, and tin in Boletus edulis, Agaricus bisporus, and Lentinus edodes. Differences in the fractionation patterns of the elements were found to depend on the mushroom species and the extraction medium. Most of the elements were associated with high mw fractions. It was not possible to assess the trace metal contributions from the mushroom growth media. Copyright © 2004 John Wiley & Sons, Ltd.     

Macromolecular brushes synthesized by “grafting from” approach based on “click chemistry” and RAFT polymerization

Well‐defined macromolecular brushes with poly(N‐isopropyl acrylamide) (PNIPAM) side chains on random copolymer backbones were synthesized by “grafting from” approach based on click chemistry and reversible addition‐fragmentation chain transfer (RAFT) polymerization. To prepare macromolecular brushes, two linear random copolymers of 2‐(trimethylsilyloxy)ethyl methacrylate (HEMA‐TMS) and methyl methacrylate (MMA) (poly(MMA‐co‐HEMA‐TMS)) were synthesized by atom transfer radical polymerization and were subsequently derivated to azide‐containing polymers. Novel alkyne‐terminated RAFT chain transfer agent (CTA) was grafted to polymer backbones by copper‐catalyzed 1,3‐dipolar cycloaddition (azide‐alkyne click chemistry), and macro‐RAFT CTAs were obtained. PNIPAM side chains were prepared by RAFT polymerization. The macromolecular brushes have well‐defined structures, controlled molecular weights, and molecular weight distributions (M_w/M_n ≦ 1.23). The RAFT polymerization of NIPAM exhibited pseudo‐first‐order kinetics and a linear molecular weight dependence on monomer conversion, and no detectable termination was observed in the polymerization. The macromolecular brushes can self‐assemble into micelles in aqueous solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 443–453, 2010     

Structural and magnetic properties of “one-dimensional” barium vanadium triselenide

BaVSe₃ has been synthesized and its crystal structure determined at 293(2)°K. The structure was solved in the hexagonal space group P6₃/mmc (D⁴_6h), with a = 6.9990(11) and c = 5.8621(13) Å. Scans (2 Θ) of a polycrystalline sample revealed that BaVSe₃ undergoes a transition to an orthorhombic unit cell (b′ 3^1/2 a, a′ a, c′ c) at 303(5)°K. Magnetic susceptibility measurements between 4 and 300°K indicate that BaVSe₃ is paramagnetic down to 41(1)°K, where magnetic ordering occurs, with a magnetic moment in the ordered phase of 0.2 μ_B per vanadium atom. The orthorhombic lattice distortion may be caused by the “freezing in” of “soft” vibrational modes.     

Dynamic birefringence of oligostyrene: A symptom of “polymeric” mode

The dynamic birefringence and the dynamic viscoelasticity of an oligostyrene, A1000, whose molecular weight (M_w = 1050) was comparable to the Kuhn segment size, M_K, were examined near and above the glass‐transition temperature in order to characterize polymeric features of very short chains with M ∼ M_K. The complex shear modulus, G*(ω), was similar to that for supercooled liquids: No polymeric modes such as the Rouse mode were detected at low frequencies of viscoelastic spectrum. On the other hand, the strain‐optical coefficient was found to be negative in the terminal flow zone and positive in the glassy zone. Because the negative birefringence of polystyrene is originated by polymeric modes associated with chain orientation, the present results indicate that polymeric modes exist and become dominant for birefringence in the terminal flow. The data were analyzed using a modified stress‐optical rule: The modulus and the strain‐optical ratio were separated into polymeric (rubbery) and glassy components. The total modulus, G*(ω), was mostly due to the glassy component, G_G*(ω), resulting in the positive birefringence. G_G*(ω) for A1000 agreed with that for high M polystyrenes when compared at a comparable reduced frequency scale. The polymeric component, G_R*(ω), giving rise to the negative birefringence was lower than G_G*(ω) over the whole frequency range but its contribution to the birefringence exceeded that of the glassy component at low frequencies because of the larger optical anisotropy and longer characteristic relaxation time of the former. The limiting modulus of G_R* at high frequencies was about 3 times lower than that for high M polystyrenes, indicating that the main‐chain orientation of the oligostyrene on instantaneous deformation was reduced compared with that of high M polystyrenes. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 954–964, 2000     

Acrylic Acid “Reversed” PolyHIPEs

Summary: An oil‐in‐water high internal phase emulsion consisting of acrylic acid, water, and a crosslinker (N,N′‐methylene bisacrylamide) as the water phase, and toluene as the oil phase was successfully stabilised to sustain thermal initiation of radical polymerisation resulting in porous open‐cellular monolithic material. The type of initiator used influenced the average pore size ranging from approx. 708 nm to approx. 1 087 nm, as determined by mercury porosimetry.

Schematic of the preparation of an oil‐in‐water‐type polyHIPE (high internal phase emulsion).