共查询到20条相似文献,搜索用时 31 毫秒
1.
S. Abd El Wanees A. Abd El Aal Mohamed M. Abd El Azeem R. El Said 《Journal of Dispersion Science and Technology》2013,34(11):1516-1525
The inhibition of silver corrosion in dilute nitric acid (0.01 M) was studied using electrochemical polarization technique in the presence of different concentrations of methylamine, ethylamine, n-propylamine, and n-butylamine. It was found that the inhibition efficiency obtained from Tafel plots improved when the inhibitor concentration and the length of the alkyl chain were increased. The inhibition efficiency increased markedly with increase the additive concentrations according to the following order: methylamine < ethylamine < n-propylamine < n-butylamine. The inhibition action of such compounds occurred by simple blocking of amines on the electrode surface through adsorption process according to Temkin adsorption isotherm. The nearly constant values of the anodic Tafel slopes indicated that the presence of such amines do not affect the mechanism of metal dissolution. 相似文献
2.
The corrosion inhibitive and adsorption behaviors of Hydroclathrus clathratus on mild steel in 1 M HCl and 1 M H2SO4 solutions at 303, 313 and 323 K were investigated by weight loss, electrochemical, and surface analysis techniques. The results show that H. clathratus acts as an inhibitor of corrosion of mild steel in acid media. The inhibition efficiency was found to increase with increase in inhibitor concentration but to decrease with rise in temperature, suggestive of physical adsorption. The adsorption of the inhibitor onto the mild steel surface was found to follow the Temkin adsorption isotherm. The inhibition mechanism was further corroborated by the results obtained from electrochemical methods. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses supported the inhibitive action of the alga against acid corrosion of mild steel. 相似文献
3.
H. B. Ouici O. Benali Y. Harek L. Larabi B. Hammouti A. Guendouzi 《Research on Chemical Intermediates》2013,39(6):2777-2793
A new corrosion inhibitor, namely 5-(2-hydroxyphenyl)-1,2,4-triazole-3-thione (5-HTT), has been synthesized and its influence on corrosion inhibition of mild steel in 5 % HCl solution has been studied using weight loss method and electrochemical measurements. Potentiodynamic polarization measurements clearly reveal that the investigated inhibitor is of mixed type, and it inhibits the corrosion of the steel by blocking the active site of the metal. Changes in impedance parameters were indicative of adsorption of 5-HTT on the metal surface, leading to the formation of protective films. The degree of the surface coverage of the adsorbed inhibitors was determined by weight loss measurements, and it was found that the adsorption of these inhibitors on the mild steel surface obeys the Langmuir adsorption isotherm. The effect of the temperature on the corrosion behavior with addition of 5 × 10?4 M of the inhibitor was studied in the temperature range 30–60 °C. The reactivity of this compound was analyzed through theoretical calculations based on density functional theory to explain the different efficiency of these compounds as a corrosion inhibitor. 相似文献
4.
Ambrish Singh J. N. Avyaya Eno. E. Ebenso M. A. Quraishi 《Research on Chemical Intermediates》2013,39(2):537-551
The inhibition ability of Dapsone’s Schiff’s base with salicylaldehyde (1:2) for mild steel corrosion in 1 M HCl solution at 308 K was studied by means of potentiodynamic polarization, electrochemical impedance spectroscopy techniques, and gravimetric analysis. Results showed that Dapsone salicylaldehyde performed well as a good inhibitor for mild steel in 1 M HCl solution with maximum inhibition efficiency of 95 % at 500 ppm. The adsorption isotherm of the inhibitor followed the Langmuir adsorption. The value of free energy of adsorption showed that it is a spontaneous process and followed typical physical adsorption. 相似文献
5.
1,3,5-tri-p-tolyl-1,3,5-triazene was investigated as a corrosion inhibitor for brass in 0.5 M HCl solution using weight loss, potentiodynamic polarization, linear polarization resistance and electrochemical impedance spectroscopy. Data obtained from these methods showed average inhibition efficiency (76 %) at optimum concentration. The adsorption of the inhibitor on the brass surface follows the Frumkin adsorption isotherm. 相似文献
6.
M. Kaddouri S. Rekkab M. Bouklah B. Hammouti A. Aouniti Z. Kabouche 《Research on Chemical Intermediates》2013,39(8):3649-3667
Inhibition of the corrosion of mild steel in molar hydrochloric acid by two calixarenes, including the effect of inhibitor concentration and temperature, has been investigated by use of weight loss and electrochemical measurements (polarisation and impedance). The results obtained showed that the rate of corrosion decreased substantially in the presence of the compounds, with maximum inhibition of 98.2 % by one of the compounds at a concentration of 10?3 M. The effect of temperature on corrosion behaviour in the presence of different concentrations of the two new calixarenes was studied in the range 45–75 °C. The efficiency of inhibition by the compounds increased with increasing inhibitor concentration and was independent of temperature. Polarisation curves revealed that the calixarenes are mixed-type inhibitors. Adsorption of the inhibitors by the carbon steel surface obeyed the Langmuir adsorption isotherm. Some thermodynamic data for the dissolution and adsorption processes were also determined. 相似文献
7.
M. Larif A. Elmidaoui A. Zarrouk H. Zarrok R. Salghi B. Hammouti H. Oudda F. Bentiss 《Research on Chemical Intermediates》2013,39(6):2663-2677
The inhibition effect of polyphenols extracted from olive mill wastewater (PP) on carbon steel in 1.0 M HCl solution was studied. Inhibition efficiency of PP was carried out by using chemical (weight loss method) and electrochemical techniques [potentiodynamic polarization and electrochemical impedance spectroscopy (EIS)]. The effect of temperature and immersion time on the corrosion behavior of carbon steel in 1.0 M HCl with addition of an extract was also studied. The results show that PP acts as a very good inhibitor, and the inhibition efficiency increases with the concentration of PP and decreases with rising temperature. Polarization curves show that PP behaves as a mixed-type inhibitor in hydrochloric acid. Data, obtained from EIS measurements, were analyzed to model the corrosion inhibition process through an appropriate equivalent circuit model; a constant phase element has been used. EIS shows that charge-transfer resistance increases and the capacitance of double layer decreases with the inhibitor concentration, confirming the adsorption process mechanism. The activation energy as well as other thermodynamic parameters for the inhibition process were calculated. The adsorption of PP obeys the Langmuir adsorption isotherm. 相似文献
8.
《Comptes Rendus Chimie》2019,22(5):355-362
In this study, the effect of the alkyl chain of quaternary ammonium cationic surfactants on corrosion inhibition in hydrochloric acid (HCl) solution was investigated by using dodecyl trimethyl ammonium chloride (DTAC), tetradecyl trimethyl ammonium chloride (TTAC), cetyl trimethyl ammonium chloride (CTAC), and octadecyl trimethyl ammonium chloride (OTAC) as corrosion inhibitors to uncover their structure–efficiency relationships. The effect of the alkyl chain of quaternary ammonium cationic surfactants on corrosion inhibition in HCl solution was studied under different conditions, such as corrosion inhibitor concentration, temperature, and acidity, and this was done using the weightlessness method. The results obtained show that these inhibitors have high corrosion inhibition effect on A3 steel, and the corrosion inhibition efficiency is dependent on the length of the alkyl chain. At the same concentration, the longer the alkyl chain, the weaker the corrosion inhibition effect. When the temperature was 50 °C and the concentration of corrosion inhibitor was 70 mg/L, the corrosion inhibition efficiency order of the four cationic surfactants was DTAC > TTAC > CTAC > OTAC. Besides, the experimental results obtained show that the adsorption of the inhibitor on the A3 steel surface conforms to the Langmuir type isotherm, and then the corresponding adsorption thermodynamic parameters were obtained according to these parameters. It was observed that ΔH, ΔS, and Ea increased with increase in the length of the alkyl chain. The adsorption of the inhibitor on the steel surface is an exothermic, spontaneous, entropy process. 相似文献
9.
Xiaogang Yang Bin Li Haizeng Wang Baorong Hou 《Journal of Dispersion Science and Technology》2013,34(5):672-676
The inhibition effect of cetyl trimethyl ammonium bromide (CTAB) on the corrosion of mild steel in 1.0 mol L?1 hydrochloric acid (HCl) has been studied at different temperatures (25–60°C) by weight loss and potentiodynamic polarization methods. The results reveal that CTAB behaves as an effective inhibitor in 1.0 mol L?1 HCl, and the inhibition efficiency increases with the inhibitor concentration. Polarization curves show that CTAB is a mixed-type inhibitor in hydrochloric acid. The results obtained from weight loss and polarizations are in good agreement. The effect of immersion time on corrosion inhibition has also been examined and is discussed. The adsorption of inhibitor on mild steel surface obeys the Langmuir adsorption isotherm equation. Thermodynamic parameters have been obtained by adsorption theory. The inhibition effect is satisfactorily explained by the parameters. 相似文献
10.
The inhibition of mild steel corrosion in aerated acid mixture of 0.5 N H2SO4 and 0.5 N HCl solution was investigated using potentiodynamic polarization studies, linear polarization studies, electrochemical impedance spectroscopy, adsorption, and surface morphological studies. The effect of inhibitor concentration on corrosion rate, degree of surface coverage, adsorption kinetics, and surface morphology is investigated. The inhibition efficiency increased markedly with increase in additive concentration. The presence of PEG and PVP decreases the double-layer capacitance and increases the charge-transfer resistance. The inhibitor molecules first adsorb on the metal surface following a Langmuir adsorption isotherm. Both PEG and PVP offer good inhibition properties for mild steel and act as mixed-type inhibitors. Surface analysis by scanning electron microscopy (SEM) and atomic force microscopy (AFM) shows that PVP offers better protection than PEG. 相似文献
11.
Dris Ben Hmamou Rachid Salghi Abdelkader Zarrouk Hassan Zarrok Omar Benali Mohamed Errami Belkheir Hammouti 《Research on Chemical Intermediates》2013,39(7):3291-3302
The corrosion inhibition properties of horehound (Marrubium vulgare L.) extract (HE) in 1 M hydrochloric acid medium was carried out using electrochemical methods (polarization curve and electrochemical impedance spectroscopy). Experiments were performed by concentration of the inhibitor and temperature effect. The results showed variation in inhibition performance of this plant extract. The Langmuir model was tested to describe the adsorption behavior of the inhibitor on the C38 steel surface. Some thermodynamic functions of dissolution processes were also determined. 相似文献
12.
Saviour A. Umoren Mauro J. Banera Teodoro Alonso-Garcia Claudio A. Gervasi Maria V. Mirífico 《Cellulose (London, England)》2013,20(5):2529-2545
The efficiency of chitosan (a naturally occurring polymer) as a corrosion inhibitor for mild steel in 0.1 M HCl was investigated by gravimetric, potentiodynamic polarization, electrochemical impedance spectroscopy measurements, scanning electron microscopy, and UV–visible analysis. The polymer was found to inhibit corrosion even at a very low concentration. Inhibition efficiency increases with a rise in temperature up to 96 % at 60 °C and then drops to 93 % at 70 °C, while it slightly increases with an increase in chitosan concentration. Polarization curves indicate that chitosan functions as a mixed inhibitor, affecting both cathodic and anodic partial reactions. Impedance results indicate that chitosan was adsorbed on the metal/solution interface. Adsorption of chitosan at the mild steel surface is found to be in agreement with Langmuir adsorption isotherm model. Chemical adsorption is the proposed mechanism for corrosion inhibition considering the trend of protection efficiency with temperature. Calculated kinetic and thermodynamic parameters corroborate the proposed mechanism. 相似文献
13.
Inhibitive effect by extract of Mentha rotundifolia leaves on the corrosion of steel in 1 M HCl solution 总被引:1,自引:0,他引:1
A. Khadraoui A. Khelifa H. Hamitouche R. Mehdaoui 《Research on Chemical Intermediates》2014,40(3):961-972
An extract of Mentha rotundifolia leaves (EMRL) was tested as a corrosion inhibitor of steel in 1 M HCl using electrochemical impedance spectroscopy, Tafel polarization methods, and weight loss measurements. The inhibition efficiency of the extract of Mentha rotundifolia leaves was calculated and compared. We note good agreement between these methods. The results obtained revealed that the inhibitor tested differently reduced the kinetics of the corrosion process of steel. Its efficiency increases with the concentration and attained 92.87 % at 35 %. The effect of temperature on the corrosion behavior of steel in 1 M HCl was also studied in the range 298 and 338 K. The thermodynamic data of activation were determined. Mentha rotundifolia extract is adsorbed on the steel surface according to a Langmuir adsorption model. 相似文献
14.
N.A. Al-Mobarak K.F. Khaled Mohamed N.H. Hamed K.M. Abdel-Azim 《Arabian Journal of Chemistry》2011,4(2):185-193
The inhibition effect of 2-carboxymethylthio-4-(p-methoxyphenyl)-6-oxo-1,6-dihy-dropyrimidine-5-carbonitrile (CPD) towards the corrosion of copper was studied in aerated stagnant 3.5% NaCl at 25 °C using ac techniques include electrochemical frequency modulation and electrochemical impedance spectroscopy as well as potentiodynamic polarization measurements. Corrosion rates determined using electrochemical frequency modulation (EFM) which measures the non-linear behaviour of a corroding system are compared with corrosion rates obtained from traditional electrochemical techniques and show good agreement. Data obtained from EIS were analyzed to model the corrosion inhibition process through equivalent circuit. Polarization measurements showed that CPD acts as mixed-type inhibitor. The inhibition efficiency increases with an increase in the concentration of CPD. The adsorption of the inhibitor on the copper surface in the sodium chloride solution was found to obey Langmuir’s adsorption isotherm. A mixed inhibition mechanism is proposed for the inhibitive effects of CPD as revealed by potentiodynamic polarization technique. 相似文献
15.
Li Song Yuming Zhou Xiaoli Sheng Qingzhao Yao Xiaoyong Xi 《Research on Chemical Intermediates》2018,44(10):5833-5855
Imidazole (IMI)-based polyethylene glycol monomethyl ether (MPEC-IMI) as a novel green corrosion inhibitor was synthesized to protect the Q235 steel in 0.5 M HCl corrosive medium at 318 K. The inhibition performance of MPEC-IMI was investigated by weight loss measurement, the electrochemical method (Tafel and EIS) and surface analysis (SEM and EDX). The results reveal that the MPEC-IMI shows enhanced anticorrosion performance for carbon steel, which is attributed to the formation of the adsorptive protection film on the surface, and the type of adsorption basically obeys the Langmuir monolayer adsorption. Furthermore, when the concentration of MPEC-IMI is 300 mg L?1, the corrosion inhibition efficiency can reach up to 92.00%. In support of further study of the corrosion inhibition behavior by virtue of quantum chemical calculation and molecular dynamics simulations, the results show that the MPEC-IMI molecule has high reactivity and strong interaction on the iron surface. 相似文献
16.
M. Mobin Jeenat Aslam Hamad A. Al-Lohedan 《Journal of Dispersion Science and Technology》2016,37(7):1002-1009
The cationic gemini surfactant 1,2-bis(N-tetradecyl-N,N-dimethylammonium)ethane dibromide (14-2-14) was synthesized using a previously described method. The surfactant was characterized using 1H NMR. The corrosion inhibition effect of 14-2-14 on mild steel in 1 M HCl at temperatures 30–60°C was studied using weight loss measurements, potentiodynamic polarization measurements and electrochemical impedance spectroscopy. Morphology of the corroded mild steel specimens was examined using scanning electron microscopy (SEM). The results of the studies show that gemini surfactant is an efficient inhibitor for mild steel corrosion in 1 M HCl; the maximum inhibition efficiency (IE) of 98.06% is observed at surfactant concentration of 100 ppm at 60°C. The %IE increases with the increasing inhibitor concentration and temperature. The adsorption of inhibitor on the mild steel surface obeys Langmuir adsorption isotherm. SEM studies confirmed smoother surface for inhibited mild steel specimen. 相似文献
17.
A. Jmiai B. El Ibrahimi A. Tara R. Oukhrib S. El Issami O. Jbara L. Bazzi M. Hilali 《Cellulose (London, England)》2017,24(9):3843-3867
Natural biopolymer chitosan organic compound (COC) has been used as a copper corrosion inhibitor in molar hydrochloric medium. This study was conducted by weight loss, polarization curves and electrochemical impedance spectroscopy measurements. Scanning electron microscopy, energy dispersive X-ray spectrometry and atomic force microscopy studies were used to characterize the surface of uninhibited and inhibited copper specimens. The study of the temperature effect was carried out to reveal the chemical nature of adsorption. The inhibition efficiency tends to increase by increasing inhibitor concentration to reach a maximum of 87% at 10?1 mg L?1. The values of inhibitor efficiency estimated by different electrochemical and gravimetric methods indicate the performance of copper in HCl medium containing COC. Adsorption of COC was found to follow the Langmuir adsorption isotherm. In order to get a better understanding of the relationship between the inhibition efficiency and molecular structure of COC, quantum chemical and molecular dynamics simulation approaches were performed to get a better understanding of the relationship between the inhibition efficiency and molecular structure of chitosan. 相似文献
18.
Dris Ben Hmamou Rachid Salghi Abdelkader Zarrouk Hassan Zarrouk Mohamed Errami Belkheir Hammouti Laila Afia Lhoucine Bazzi Lahcen Bazzi 《Research on Chemical Intermediates》2013,39(3):973-989
The inhibitive action of verbena essential oil (VEO) on the corrosion of mild Steel in 1 M HCl solutions in the temperature range 298 to 328 K was measured by use of the weight-loss method, potentiodynamic polarization, and electrochemical impedance spectroscopy. Results showed that VEO inhibited corrosion of C38 steel in 1 M HCl solution and that inhibition efficiency increased with increasing concentration of inhibitor but decreased proportionally with temperature. Potentiodynamic polarization studies suggested VEO is a mixed-type inhibitor, with the anodic type predominating. Nyquist plots were depressed semicircles with their centre below the real axis. Adsorption of VEO by the C38 steel surface followed the Langmuir adsorption isotherm. Kinetic data for dissolution were investigated. 相似文献
19.
《印度化学会志》2023,100(6):101013
Through using chemical and electrochemical methods, the theoretical and experimental investigation of the expired vilazodone drug's ability to prevent corrosion on aluminium (Al) in a corrosive medium of HCl (1 M) has been examined. Weighing tests (WL), electrochemical (impedance spectroscopy (EIS), potentiodynamic polarization (PDP)), atomic force microscopy (AFM), scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR) tests at 25 °C have all been used to investigate Vilazodone's capability to prevent corrosion of Al in 1 M HCl in the concentration in the range of 25–150 ppm. The corrosion inhibition effect of the investigate Vilazodone's against Al in acid environment was investigated weight loss and electrochemical methods. The highest % inhibition efficiency (%IE) was 95% resulted from weight loss technique at the highest concentration for inhibitor. According to the PDP data, this examined vilazodone function as a mixed-type inhibitor, impacting both the anodic and cathodic reactions. The inhibitors covered the active points of the metal surface, according to electrochemical impedance spectroscopy (EIS), to prevent corrosion. It was discovered that the inhibitor adsorption on the Al surface obeyed the Langmuir adsorption isothermal model. AFM, SEM, and FTIR surface examinations proved the inhibitor had a significant protective effect against Al dissolution in 1 M HCl. The outcomes from chemical and electrochemical methods are relatively consistent. Vilazodone acted as an effective corrosion inhibitor, according to all of the experimental data. 相似文献
20.
Ayman M. Atta Maher A. Elsockary Osama F. Kandil Nevin O. Shaker 《Journal of Dispersion Science and Technology》2013,34(1):27-39
Recycled poly(ethylene terephthalate) (PET) can be modified to produce nonionic surfactants. Recycling of PET waste was carried out in presence of triethanolamine and manganese acetate as catalyst. The produced oligomers were reacted with stearic acid and polyethylene glycol, PEG, which have different molecular weights 400, 1,000, and 4,000. The inhibition of corrosion of steel in 1 molar hydrochloric acid solution in the presence of the prepared surfactants is studied by weight loss and electrochemical polarization measurements. The polarization curves indicate that these compounds act as mixed‐type inhibitors. The inhibition efficiency increases with the increase of inhibitor concentration to reach their critical micelle concentrations. The temperature effect on the corrosion behavior of steel in 1 M HCl with and without surfactants is studied in the temperature range from 308 to 343 K. The adsorption of inhibitors on the steel surface is found to increase with increasing the temperature. From the adsorption isotherm, some thermodynamic data for the adsorption process are calculated and discussed. 相似文献