Mechanism of enantioseparation on zeolite-supported chiral stationary phases in the presence of lipophilic buffer

Summary Chiral stationary phases have been prepared on a zeolite A support. In addition to polar hydrophilic chiral selector molecules derived from DNB-L-Leu and DNB-L-Phe amides, dynamic modification of the underivatized free surface hydroxyl (silanol) groups of the zeolite can be used to increase the overall hydrophobic character. On these non-capped chiral stationary phases, in the presence of lipophilic buffer salts in the aqueous organic phase, the enantioseparation of ion-paired D,L-mandelic acid was facilitated and was studied in more detail. The enantioseparation might be based on hydrogen bonding and π-π interaction supported by simultaneous hydrophobic interaction. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997.     

Click chemistry for facile immobilization of cyclodextrin derivatives onto silica as chiral stationary phases

Click chemistry was applied to immobilize mono-azido-β-cyclodextrin derivatives onto the surface of silica to give novel chiral stationary phases (CSPs). The desired CSPs showed high stability and excellent enantioseparation effects in capillary electrochromatography (CEC).     

Residual silanols at reversed-phase silica in HPLC--a contribution for a better understanding

As porous silica gel is the most common adsorbent and support for bonded stationary phase synthesis, residual silanol groups are a recurring problem in the field of liquid chromatography and other separation techniques. Residual silanols most often have a negative effect on the separation process by causing peak tailing. Therefore, there was an attempt to remove residual silanols during stationary-bonded phase synthesis. The type and surface concentration of residual silanols were measured using different instrumental techniques such as NMR and infrared spectroscopy, calorimetry, and various chromatographic methods. Residual silanols exhibit acidic characteristic and they can ionize depending on the environment. Thus, they posses cation-exchange properties and cause the zeta potential of silica particle in liquid environment. Presented review discusses the influence of the residual silanol groups on the solvation process and retention of polar compounds. The novel methodology of residual silanols determination is presented as well as the influence of the silanols on the zeta potential of the stationary-bonded phases in chromatographic conditions.     

Synthesis and application of mono-6-(3-methylimidazolium)-6-deoxyperphenylcarbamoyl-beta-cyclodextrin chloride as chiral stationary phases for high-performance liquid chromatography and supercritical fluid chromatography

The synthesis of mono-6-(3-methylimidazolium)-6-deoxyperphenylcarbamoyl-beta-cyclodextrin chloride (MPCCD) and its application in chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC) and supercritical fluid chromatography (SFC) are being reported. This chiral selector is coated onto silica gel in different weight percentages (15, 20 and 35%, w/w) to obtain CSPs having different loading content. These new chiral stationary phases are tested using normal-phase HPLC for enantioseparation of racemic aromatic alcohols. Indeed, the enantiodiscrimination abilities of these CSPs are found to be influenced by the loading content of the chiral selector. Among the three columns (MPCCD-C15, MPCCD-C20 and MPCCD-C35), the best enantioseparation results are obtained using a column containing 20% (w/w) of MPCCD (MPCCD-C20). The resolution (R(s)) obtained for p-fluorophenylethanol, p-chlorophenylethanol, p-bromophenylethanol, p-iodophenylethanol and p-fluorophenyl-3-buten-1-ol using MPCCD-C20 ranges from 3.83 to 5.65. Good enantioseparation results are obtained for these analytes under SFC separation conditions using the MPCCD-C20 column.     

Preparation and Enantioseparation Property of Chiral Stationary Phases Based on Cellulose Tris(3,5-dimethylbenzoate)——A New Way to Prepare Polysaccharide-coating Type Chiral Stationary Phases

A new method to prepare polysaccharide-coating type chiral stationary phases （CSPs） was developed in this work. As a typical example, naked silica gel was coated by cellulose, which was then derivatized with 3,5-dimethylbenzoyl chloride to afford cellulose tris（3,5-dimethylbenzoate）-silica gel （CTDBS） complex. The silanols on CTDBS were end-capped with 3- aminopropyltriethoxysilane to obtain CSP 1. The amino groups on CSP 1 were further end-capped with 3,5-dimethylbenzoyl chloride to give CSP 2. The silanols on CTDBS were end-capped with methyltrimethoxysilane to yield CSP 3. CSPs 1-3 were characterized by FTIR, solid-state 13C-NMR and elemental analysis. The enantioseparation abilities of CSPs 1-3 were evaluated with structurally various chiral analytes. The enantioseparation results demonstrated that the end-capping moieties on CSPs 1 and 2 significantly affected enantioseparation. In addition, the effect of the structures of chiral analytes and end- capping moieties on the retention factors and the resolutions was discussed.     

Optimization of the surface modification process of cross‐linked polythiol‐coated chiral stationary phases synthesized by a two‐step thiol‐ene click reaction

A new platform technology for the preparation of stable chiral stationary phases was successfully optimized. The chiral selector tert‐butylcarbamoylquinine was firstly covalently connected to the polymer poly(3‐mercaptopropyl)methylsiloxane by thiol‐ene click reaction. Secondly, the quinine carbamate functionalized polysiloxane conjugate was coated onto the surface of vinyl modified silica particles and cross‐linked via thiol‐ene click reaction. The amount of polysiloxane, chiral selector, radical initiator, reaction solvent (chloroform and methanol), reaction time, and pore size of the supporting silica particles were varied and systematically optimized in terms of achievable plate numbers while maintaining simultaneously enantioselectivity. The optimization was based on elemental analysis data, chromatographic results, and H/u‐curves (Van Deemter) of the resultant chiral stationary phases. The results suggest that better chromatographic efficiency (higher plate numbers) at equal enantioselectivity can be achieved with methanol (a poor solvent for the polysiloxane that is dispersed rather than dissolved) and a lower film thickness of quinine carbamate functionalized polysiloxane. In this study, chiral stationary phases based on 100 Å silica slightly outperformed 200 Å silica particles (each 5 μm). The optimized two step material exhibited significantly reduced mass transfer resistance compared to the one step material and equal performance as a brush‐type chiral stationary phase.     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

手性选择体的固定量对固定相手性分离的影响

为研究手性选择体的固定量对固定相对映体分离能力的影响,将L-(-)-二苯甲酰酒石酸与苯甲醇反应,制备出单苄酯,再将此单苄酯的另一羧基转化为酰氯,得到手性选择体,将此选择体固定在氨丙基硅胶上,制备出选择体固定量较高的固定相,比较了此固定相与前期工作中选择体相同但选择体固定量较低的固定相在手性分离能力方面的差异,此外讨论了...     

Optimization of the LC enantioseparation of chiral pharmaceuticals using cellulose tris(4‐chloro‐3‐methylphenylcarbamate) as chiral selector and polar non‐aqueous mobile phases

The resolving power of a new commercial polysaccharide‐based chiral stationary phase, Sepapak‐4, with cellulose tris(4‐chloro‐3‐methylphenylcarbamate) coated on silica microparticles as chiral selector, was evaluated toward the enantioseparation of ten basic drugs with widely different structures and hydrophobic properties, using ACN as the main component of the mobile phase. A multivariate approach (experimental design) was used to screen the factors (temperature, n‐hexane content, acidic and basic additives) likely to influence enantioresolution. Then, the optimization was performed using a face‐centered central composite design. Complete enantioseparation could be obtained for almost all tested chiral compounds, demonstrating the high chiral discrimination ability of this chiral stationary phase using polar organic mobile phases made up of ACN and containing an acidic additive (TFA or formic acid), 0.1% diethylamine and n‐hexane. These results clearly illustrate the key role of the nature of the acidic additive in the mobile phase.     

Evaluation of differences between Chiralpak IA and Chiralpak AD‐RH amylose‐based chiral stationary phases in reversed‐phase high‐performance liquid chromatography

Polysaccharide‐based chiral stationary phases can be used for the enantioselective separation of a wide range of structurally different compounds. These phases are available with chiral selectors coated or immobilized on silica gel support. The means of attachment of the chiral selector to the carrier can influence the separation performance of these stationary phases. This paper deals with evaluation of differences in the separation abilities of coated Chiralpak AD‐RH versus immobilized Chiralpak IA amylose‐based stationary phases in the reversed–phase mode of high–performance liquid chromatography. A set of chiral analytes was separated under acidic and basic conditions. Differences were observed in the enantioseparation potential of the tested phases. The linear‐free energy relationship and additional evaluation of ionic interactions were used to ascertain whether the interactions that participate in retention and enantioseparation are affected by the means of preparation of these phases. All the interactions covered by the linear‐free energy relationship were significant for the studied phases and their absolute values were almost always higher for the coated phase. Ionic interactions were found to be more important on the immobilized stationary phase but did not contribute to any improvement in the enantioselective separation performance.     

In‐column preparation of a brush‐type chiral stationary phase using click chemistry and a silica monolith

Brush‐type chiral stationary phases (CSP) have been prepared both from a silica monolith and, separately, from 10 μm porous silica beads via a process of in‐column modification including attachment of the chiral selector via copper‐catalyzed azide–alkyne cycloaddition. Azide functionalities were first introduced on the pore surface of each type of support by reaction with 3‐(azidopropyl)trimethoxysilane, followed by immobilization of a proline‐derived chiral selector containing an alkyne moiety. This functionalization reaction was carried out in dimethylformamide (DMF) in the presence of catalytic amounts of copper (I) iodide. The separation performance of these triazole linked stationary phases was demonstrated in enantioseparations of four model analytes, which afforded separation factors as high as 11.4.     

Novel cyclodextrin chiral stationary phases for high performance liquid chromatography enantioseparation: Effect of cyclodextrin type

Three novel chiral stationary phases (CSPs) were prepared by regioselective chemical immobilization of mono(6^A-N-allylamino-6^A-deoxy)perphenylcarbamoylated (PICD) α-, β-, and γ-cyclodextrins (CDs) onto silica support via hydrosilylation. Their enantioseparation properties in high performance liquid chromatography (HPLC) were evaluated with a large spectrum of racemates including flavanone compounds, β-adrenergic blockers, amines and non-protolytic compounds. The effect of CD's cavity size on enantioseparation abilities was studied and discussed. The results indicated that CD's surface loading at silica support played an important role in the enantioseparation on these CSPs under normal-phase conditions while inclusion phenomena contributed the major driving force under reverse-phase conditions. As expected, α-PICD demonstrated the best resolutions towards flavonone and most aromatic alcohols under normal-phase conditions with the highest surface loading; while Fujimura's competitive inclusion model can be applied to explain the better enantioseparations towards β-adrenergic blockers, amines and non-protolytic compounds with α- and β-PICD CSPs. γ-PICD CSP showed superior enantioseparation ability for sterically encumbered analytes like flavanone compounds under both normal-phase and reversed phase conditions.     

Arylcarbamoylated allylcarbamido-β-cyclodextrin: synthesis and immobilization on nonfunctionalized silica gel as a chiral stationary phase

Four new chiral stationary phases based on mono-(6^A-allylcarbamido-6^A-deoxy)-arylcarbamoylated β-cyclodextrin were synthesized. The chiral stationary phase of phenylcarbamoylated β-cyclodextrin exhibited excellent separation capability for a variety of chiral compounds. Compared with the previous work, it was found that the spacer remained on the surface of the silica gel and decreased the enantioseparation capability.     

Effect of the residual silanol group protection on the liquid chromatographic resolution of α‐amino acids and proton pump inhibitors on a ligand exchange chiral stationary phase

A new ligand exchange chiral stationary phase (new CSP) containing residual silanol group‐protecting n‐octyl groups on the silica surface was prepared by treating a ligand exchange CSP (original CSP) based on sodium N‐[(R)‐2‐hydroxy‐1‐phenylethyl]‐N‐undecylaminoacetate bonded to silica gel with excess n‐octyltriethoxysilane. The new and original CSPs containing an identical amount of chiral selector were applied to the resolution of α‐amino acids and proton pump inhibitors (PPIs) including omeprazole, pantoprazole, lansoprazole, and rabeprazole. The separation factors (α) and resolutions (R_S) were greater on the new CSP than on the original CSP except for the resolution of asparagine. The trends of the retention factors (k₁) for the resolution of α‐amino acids on the new and original CSPs with the variation of the organic modifier content in aqueous mobile phase were opposite to those for the resolution of PPIs. Removal of the nonenantioselective interactions between the residual silanol groups and the analytes and the improved lipophilicity of the new CSP were proposed to be responsible for the improved chiral recognition ability of the new CSP and the different retention behaviors of the enantiomers between the new and original CSPs.     

Reversible oxidation/reduction of silver supported on silica aerogel: Influence of the addition of phosphate

Ag/SiO₂ and Ag₃PO₄/SiO₂ systems supported on silica aerogel were investigated using temperature-programmed reduction (TPR), UV-visible diffuse reflectance spectroscopy (UV-vis DRS), and infrared spectroscopy. The formation of highly dispersed silver particles, uniformly distributed along the surface and stabilized with silanol groups, was observed for Ag/SiO₂ system. Phosphate and silanol groups produce two states of silver localization in phosphate-containing system. The addition of phosphate onto the silica surface leads to the reversible oxidation/reduction of silver in the temperature range of 100–300°C with transitions of silver (particles 10–30 nm in size) to charged states (ions, clusters stabilized by phosphate groups). This reversible behavior of silver is stable, and the amount of silver involved in these processes remained constant (∼50%) for the series of consistent cyclic oxidation/reduction treatments.     

N-(3,5-二甲基苯基)氨基甲酸酯单糖及二糖作为高效液相色谱 手性固定相研究

广泛使用的环糊精和多糖手性固定相是由吡喃型葡萄糖结构单元构成, 将D-葡萄糖、D-半乳糖、D-甘露糖、D-木糖、麦芽糖、蔗糖、乳糖、纤维二糖的N-(3,5-二甲基苯基)氨基甲酸酯经过3-异氰酸丙基三乙氧基硅烷键合到硅胶上作为高效液相色谱的手性固定相, 结果表明它们也具有好的手性分离能力, 并且它们之间的手性识别能力还具有好的互补性. 该研究表明, 在高效液相色谱中寡糖能成为一类新型的手性固定相.     

Mono-2, 3 or 6-Hydroxy Methylated β-Cyclodextrin (Eicosa-O-methyl-β-cyclodextrin) Isomers as Chiral Stationary Phases for Capillary GC

This work deals with the evaluation of three monohydroxy methylated β-cyclodextrin isomers as chiral selectors for capillary gas chromatography. Chromatographic properties of these stationary phases have been investigated in terms of efficiency, inertness and polarity. Injections of homologous series of hydantoin derivatives and 1-phenylethan-1-ol have highlighted the predominant influence of hydroxyl groups in 2 or 3 positions on chiral discrimination. By contrast, presence of hydroxyl groups in 6-O-position did not significantly influence the enantioseparation ability. Moreover, T _iso calculated on TRIMEB-2-OH in OV1701-OH and on pure TRIMEB-2-OH for 5-methyl-5-alkyl hydantoin derivatives were notably different indicating that polysiloxan–selector interactions could not be neglected.     

On the use of dispersed nanoparticles modified with single layer beta-cyclodextrin as chiral selecor to enhance enantioseparation of clenbuterol with capillary electrophoresis

A new strategy for chiral separation by capillary electrophoresis employing modified-nanoparticles as chiral selector is described for clenbuterol analysis. Nanoparticles modified with β-cyclodextrin (β-CD) form a large surface area platform to serve as a pseudostationary chiral phase, which can be applied for the enhancement of the enantioseparation. The application of four kinds of nanoparticles was investigated (multi-walled nanotubes (MWNTs), polystyrene (PS), TiO₂ and Al₂O₃) modified with single layer β-CD as chiral selector in the enantioseparation of clenbuterol by capillary electrophoresis (CE). Successful clenbuterol enantioseparation could be achieved with the β-CD-modified MWNTs as chiral selector. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) confirmed the β-CD modification of the nanoparticles. The effects of nanoparticles, surfactant, chiral selector (β-CD) and run buffer were studied in relation to the enantiomeric separation of clenbuterol. This study opens attractive perspectives for the use of modified nanoparticles for chiral separational purposes in CE.     

Preparation and evaluation of a chiral HPLC stationary phase based on cone calix[4]arene functionalized at the upper rim with l‐alanine units

Here we report a new chiral stationary phase (CSP) immobilized on silica gel based on cone calix[4]arene functionalized at the upper rim with two l ‐alanine units as new chiral selector that has been used in high‐performance liquid chromatography. The CSP was prepared by covalently bonding the allyl groups at the lower rim of calix[4]arene to silica gel by thiol‐ene click chemistry reaction. Elemental analysis of the CSP showed that 120 μmol of chiral selector bonded per gram of silica gel. 1‐Hexene was used for end‐capping of unreacted mercapto groups on silica gel. Since the CSP is chemically bonded to the silica, it can be used in the normal‐phase and reversed‐phase mode and with halogenated solvents as mobile phases, if desired. The chromatographic performance of the CSP was evaluated in the enantioseparation of the 3,5‐dinitrobenzoyl derivatives of some amino acids, diclofop‐methyl and dl ‐mandelic acid.