Esterification of phthalic anhydride with 1-butanol and 2-ethylhexanol catalyzed by heteropolyacids

Esterification of phthalic anhydride with 2-ethylhexanol and 1-butanol and ester decomposition of dioctyl phthalate (DOP) in presence of Keggin; H₃PW₁₂O₄₀, H₄SiW₁₂O₄₀, H₄SiMo₁₂O₄₀, Wells–Dawson; H₆P₂W₁₈O₆₂, H₆P₂W₁₇MoO₆₂ and Preyssler; H₁₄[NaP₅W₂₉MoO₁₁₀], H₁₄[NaP₅W₃₀O₁₁₀], type heteropolyacids have been investigated. The heteropolyacids with Preyssler and Wells–Dawson structures and their molybdenum substituted derivatives show higher activity in esterification and ester decomposition reactions than Keggin type heteropolyacids. A complete conversion of phthalic anhydride to dioctyl phthalate and dibutyl phthalate are achieved in 2 h in presence of molybdenum substituted Preyssler heteropolyacid. In the decomposition of dioctyl phthalate in the presence of Preyssler heteropolyacid, 2-ethylhexene is formed in quantitative yield.     

盘状多酸P_5W_(30)/阳离子聚电解质/氧化石墨烯杂化多层膜的电致变色性能

为了提高薄膜[PEI/P_5W_(30)]_(30)的电致变色性能,将具有大的二维尺寸和良好导电性的氧化石墨烯引入该薄膜中。通过层层自组装(LBL)技术构筑了基于盘状多酸K12.5Nal.5[Na P_5W_(30)O_(110)]·15H_2O(P_5W_(30))、氧化石墨烯(GO)的复合薄膜[PEI/P_5W_(30)/PEI/GO]_(30)(PEI:聚乙烯亚胺),并利用UV-Vis光谱对薄膜的组成及增长进行监测;通过原子力显微镜对薄膜的表面形貌进行考察,利用循环伏安法对薄膜电化学氧化还原性质进行研究;薄膜在外加氧化还原电位下呈现出无色/蓝色的可逆变化,电致变色响应时间在10 s以内;此外,薄膜在阶跃电位0.75 V/-0.75 V下循环150次,电致变色性能没有明显减弱,体现了薄膜良好的电致变色可逆性。氧化石墨烯的引入使薄膜[PEI/P_5W_(30)/PEI/GO]_(30)呈现出响应速度快、抗电疲劳强的电致变色性能,将在电致变色器件领域有广阔的应用前景。     

Large heteropolymetalate complexes formed from lanthanide (Y, Ce, Pr, Nd, Sm, Eu, Gd), nickel cations and cryptate [As4W40O140]: synthesis and structure characterization

A new family of heteropolytungstate complexes (NH₄)₂₁[Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·xH₂O(Ln=Y, Ce, Pr, Nd, Sm, Eu, Gd) were prepared by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀]·60H₂O with NiCl₂·6H₂O and Ln(NO₃)₃·xH₂O at pH≈4.5. The crystal structures of (NH₄)₂₁[Gd(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·51H₂O was determined by X-ray diffraction analysis and element analysis. The compound crystallizes in the monoclinic space group P2₁/n with a=19.754(3), b=24.298(4), c=39.350(6) Å, β=100.612(3)°, V=18564(5) ų, Z=2, R1(wR₂)=0.0544(0.0691). The central site S1 and two opposite sites S2 of the big cyclic ligand [As₄W₄₀O₁₄₀]²⁸⁻ are occupied by one Ln³⁺and two Ni²⁺, respectively, each site supply four O_d coordinating to metal ion, another one water molecule and other five water molecules coordinate, respectively, to Ni²⁺and Ln³⁺. Polyanion [Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]²¹⁻ has C_2v symmetry. IR and UV–vis spectra of [NaAs₄W₄₀O₁₄₀]²⁷⁻ of the title compounds are discussed.     

H2O2-based epoxidation of bridged cyclic alkenes with [P{Ti(O2)}2W10O38] in monophasic systems: active site and kinetics

The H₂O₂-based epoxidation of bridged cyclic alkenes in a monophasic system containing low concentrations (<2 mM) of [Bu₄ⁿN]₄[Pr₂ⁱNH₃]₂H[P{Ti(O₂)}₂W₁₀O₃₈]·H₂O (1) (with two η²-peroxotitanium sites in the anion) has been studied in search of the catalytically active species involved. ³¹P NMR spectra of 1, measured under a variety of conditions, revealed that the active species was not hydroperoxotitanium complex [P{Ti(OOH)}₂W₁₀O₃₈]⁷⁻or [P{Ti(OOH)}Ti(O₂)W₁₀O₃₈]⁷⁻. The reaction pathways for the alkene epoxidation are discussed to understand the kinetics (especially the initial [H₂O₂] dependence). It was concluded that the net catalytic reaction for the epoxidation occurred through the two-electron oxidation at the hydroperoxotitanium site in the catalyst.     

Extended structural materials constructed from sulfate-centered Preyssler-type polyoxometalate with excellent electrocatalytic property

The sulfate-centered Preyssler-type polyoxometalate was firstly used to construct inorganic-organic hybrid materials, which exhibits excellent electrocatalytic activity toward reduction of H₂O₂ and NO₂^-.     

New Supramolecular Networks Based on Paratungstate with N-Donor Bridging Ligands

Three new supramolecular networks based on paratungstate and N-donor bridging ligands, [H₂bpmp]_2.5H[H₂W₁₂O₄₀]2H₂O(1), [H₂(bpp)]₂[H(py―CH₃)]_0.25[H(py―C₂H₅)]_0.25H_1.5[H₂W₁₂O₄₀]·4H₂O(2) and [H₂pip]₃[H₂W₁₂O₄₀](3)[bpmp=N,N'-bis(4-pyridylmethyl)piperazine; bpp=1,3-bis(4-pyridyl)propane; py=pyridine; pip=piperazine] were prepared by the hydrothermal synthesis and characterized by elemental analysis, infrared(IR), thermogravimetric(TG) analysis and single-crystal X-ray diffraction(XRD). All the compounds show high-dimen- sional supramolecular networks based on [H₂W₁₂O₄₀]^6- and the protonated N-donor ligands via the N―H···O―W hydrogen bonds and/or π···π stacking interactions. Their luminescent properties were investigated.     

SiO_2负载磷钨钒杂多酸杂化材料的制备及其氧化脱硫性能的研究

利用磷酸氢二钠、偏钒酸纳和钨酸钠为原料,合成了具有Keggin结构的磷钨钒杂多化合物(H5PW10V2O40),并与1-丁基-3-甲基咪唑溴(BmimBr)离子液体反应生成一种杂多酸杂化材料([Bmim]5PW10V2O40)。利用红外光谱(FT-IR)、X射线衍射光谱(XRD)和紫外可见光谱(UV-vis)对所合成的杂多酸杂化材料进行表征。结果表明,[Bmim]5PW10V2O40具有咪唑阳离子基团和Keggin型杂多阴离子基团的结构特征,并且两种基团之间存在相互作用。以SiO_2为载体制备负载型的杂多酸杂化材料催化剂[Bmim]5PW10V2O40/SiO_2,以H2O_2作为氧化剂,考察该催化剂对模拟油中DBT的氧化性能,并优化氧化反应条件,在反应温度40℃,O/S物质的量比为3.0的条件下,反应50min,模拟油品中的DBT的转化率可以达到100%。催化剂可以通过离心法分离,经过干燥之后,可以循环使用至少七次,而对DBT的氧化活性没有降低。     

A spectroscopic study on the 12-heteropolyacids of molybdenum and tungsten (H3PMo12−nWnO40) combined with cetylpyridinium bromide in the epoxidation of cyclopentene

The epoxidation of cyclopentene with hydrogen peroxide catalyzed by 12-heteropolyacids of molybdenum and tungsten (H₃PMo_12−nW_nO₄₀, n = 1–11), 12-tungstophosphoric acid and 12-molybdophosphoric acid combined with cetylpyridinium bromide as a phase transfer reagent was carried out in acetonitrile. Among 13 heteropolyacids investigated, catalyst of H₃PMo₆W₆O₄₀ showed the highest activity, giving a conversion of 60% and a selectivity of 95% in the epoxidation of cyclopentene. The fresh catalysts and the catalysts under reaction condition were characterized by UV–vis, FT-IR and ³¹P NMR spectroscopy, which has revealed that all of the molybdotungstophosphoric acids were degraded in the presence of hydrogen peroxide to form a considerable amount of phosphorus-containing species. The active species resulted from H₃PMo₆W₆O₄₀ are new kinds of phosphorus-containing species, which is different from {PO₄[WO(O₂)₂]₄}³⁻.     

Hydrothermal synthesis, crystal structure and characterization of [Zn(H2O)4]2 [H2As6V15O42(H2O)]·2H2O

The compound [Zn(H₂O)₄]₂[H₂As₆V₁₅O₄₂(H₂O)]·2H₂O (1) has been synthesized and characterized by elemental analysis, IR, ESR, magnetic measurement, third-order nonlinear property study and single crystal X-ray diffraction analysis. The compound 1 crystallizes in trigonal space group R3, a=b=12.0601(17) Å, c=33.970(7) Å, γ=120°, V=4278.8(12) Å³, Z=3 and R1(wR2)=0.0512 (0.1171). The crystal structure is constructed from [H₂As₆V₁₅O₄₂(H₂O)]⁴⁻ anions and [Zn(H₂O)₄]²⁺ cations linked through hydrogen bonds into a network. The [H₂As₆V₁₅O₄₂(H₂O)]⁶⁻ cluster consists of 15 VO₅ square pyramids linked by three As₂O₅ handle-like units.     

新型分子筛CFAP-5和CFSAPO-5的合成与性质

新型AlPO₄分子筛CFAP-5和硅磷铝分子筛CFSAPO-5分别水热合成于Pr₃N(三丙胺)-Al₂O₃-P₂O₅-H₂O体系和Pr₂N-Al₂O₃-P₂O₅-SiO₂-H₂O体系中。反应物摩尔配比分别.为:Pr₃N:Al₂O₃:P₂O₅:H₂O=1:(1～1.2):1:(40～80)和Pr₃N:Al₂O₃:P₂O₅:SiO₂:H₂O=1:(1～1.2):1:(0.5～2):(40～80),反应温度140℃。二丙胺亦可作为模板剂。经XRD、IR、TG、DTA和吸附等研究证明,CFAP-5在300～450℃之间、CFSAPO-5在300～600℃之间经焙烧后生成的相应分子筛,最大吸附孔径为4.4～4.9Å。     

Selective oxidation of alcohols with H2O2 catalyzed by zinc polyoxometalate immobilized on multi-wall carbon nanotubes modified with ionic liquid

In this work, acid functionalized multi-wall carbon nanotubes (MWCNTs) were modified with imidazolium-based ionic liquids. The selective oxidation of various alcohols with hydrogen peroxide catalyzed by[PZnMo₂W₉O₃₉]^5-, ZnPOM, supported on ionic liquids-modified with MWCNTs, MWCNTAPIB, is reported. This catalyst[ZnPOM@APIB-MWCNT], was characterized by X-ray diffraction, scanning electron microscopy (SEM) and FT-IR spectroscopic methods. This heterogeneous catalyst exhibited high stability and reusability in the oxidation reaction without loss of its catalytic performance.     

Second-sphere coordination in the complex [Mn(H2O)6]2[thiacalix[4]arene tetrasulfonate]

The title calixarene, dimanganese thiacalix[4]arene tetrasulfonate, was prepared and its crystal structure was determined. [Mn(H₂O)₆]₂[thiacalix[4]arene tetrasulfonate]·0.5H₂O crystallizes in the monoclinic system, P2(1)/m space group, with a=13.014 (6), b=14.146 (9), c=13.184 (7) Å, β=113.307 (10)°, V=2229 (2) Å³ and Dc=1.710 gcm⁻³, Z=2. The title calixarene exists in the solid state as bilayer structure. The hydrophobic organic layer consists of thiacalix[4]arene tetrasulfonate in an up-down fashion, whereas, the hydrophilic inorganic layer consists of hexaaquamanganese (II) which is linked to the former through a second-sphere coordination.     

Hydrothermal syntheses and crystal structures of bimetallic cluster complexes [{Cd(phen)2}2V4O12]·5H2O and [Ni(phen)3]2[V4O12]·17.5H2O

The hydrothermal reactions of vanadium oxide starting materials with divalent transition metal cations in the presence of nitrogen donor chelating ligands yield the bimetallic cluster complexes with the formulae [{Cd(phen₂)₂V₄O₁₂]·5H₂O (1) and [Ni(phen)₃]₂[V₄O₁₂]·17.5H₂O (2). Crystal data: C₄₈H₅₂Cd₂N₈O₂₂V₄ (1), triclinic. a=10.3366(10), b=11.320(3), c=13.268(3) Å, =103.888(17)°, β=92.256(15)°, γ=107.444(14)°, Z=1; C₇₂H₁₃₁N₁₂Ni₂O_29.5V₄ (2), triclinic. a=12.305(3), b=13.172(6), c=15.133(4), =79.05(3)°, β=76.09(2)°, γ=74.66(3)°, Z=1. Data were collected on a Siemens P4 four-circle diffractometer at 293 K in the range 1.59° <θ<26.02° and 2.01°<θ<25.01° using the ω-scan technique, respectively. The structure of 1 consists of a [V₄O₁₂]⁴⁻ cluster covalently attached to two {Cd(phen)₂}²⁺ fragments, in which the [V₄O₁₂]⁴⁻ cluster adopts a chair-like configuration. In the structure of 2, the [V₄O₁₂]⁴⁻ cluster is isolated. And the complex formed a layer structure via hydrogen bonds between the [V₄O₁₂]⁴⁻ unit and crystallization water molecules.     

新型Brnsted-Lewis酸性催化剂LaPW_(12)O_(40)/SiO_2制备及其在催化酯化反应合成生物柴油中的应用

以十二磷钨杂多酸(Tungstophosphoric acid,H_3PW_(12)O_(40))为基体,分别通过普通浸渍法、溶胶凝胶法和超声浸渍法进行了La3+改性作用,合成了三种固体酸催化剂A-LaPW_(12)O_(40)、B-LaPW_(12)O_(40)/Si O2和C-LaPW_(12)O_(40)。采用X射线荧光光谱(XRF)、孔径比表面积测定、X射线粉末衍射(XRD)、透射电镜(TEM)、红外光谱(FT-IR)、热重(TG)、N2吸附-脱附、NH3程序升温脱附(NH3-TPD)、吡啶吸附红外光谱(Py-FTIR)、X射线光电子能谱(XPS)等方法对合成的催化剂进行了表征,并比较了以上催化剂在用于催化以油酸和甲醇为反应物经酯化反应合成生物柴油时的活性和稳定性。结果表明,B-LaPW_(12)O_(40)/Si O2具有最高催化活性,当甲醇与油酸的物质的量比为8∶1,催化剂用量为反应物总质量的2%,反应温度为65℃,反应1 h后,油酸的转化率即高达93%。循环使用B-LaPW_(12)O_(40)/Si O2催化剂六次后,油酸的转化率仍高达86.4%。B-LaPW_(12)O_(40)/Si O2的高催化活性和稳定性可归因于在溶胶凝胶的转化过程中,作为硅源材料的四乙氧基硅(TEOS)易在酸性条件下发生水解反应形成Si O2网络,进而Si O2网络中的硅醇键与H_3PW_(12)O_(40)中的H+发生配位作用,生成具有强静电吸附力的(≡Si-OH2+)(H2PW12O-40)络合物。随着该络合物的形成,促进了La3+在Si O2表面的吸附而堵塞了H_3PW_(12)O_(40)的孔道结构,抑制了H_3PW_(12)O_(40)颗粒在焙烧过程中进一步聚集长大。Si O2将作为载体并以干凝胶状态存在于B-LaPW_(12)O_(40)/Si O2催化剂中,由于Si O2凝胶的高比表面积而使B-LaPW_(12)O_(40)/Si O2具有了较大的比表面积,从H_3PW_(12)O_(40)的1.4 m2/g增加至31.3 m2/g。并且,通过吡啶吸附红外光谱确定B-LaPW_(12)O_(40)/Si O2为Br9nsted-Lewis酸型固体酸,由于Br9nsted酸位易与酯化反应过程中生成的水发生水合反应而失活,因而Lewis酸位的形成有助于减少催化剂的失活现象发生。Lewis酸位的出现可归因于(≡Si-OH2+)(H2PW12O-40)与吸附在其表面的具有强吸电子作用的La3+发生键合作用后生成了LaPW_(12)O_(40)/Si O2。     

Synthesis of Pyrano[4,3‐d]pyrimidine Derivative and Its Behaviour towards Nitrogen Nucleophiles and Active Methylenes

Pyrano[4,3‐d]pyrimidine derivative 3 was prepared by reaction of chlorocarbonyl isocyanate 1 with enaminonitrile 2 . Compound 3 reacted with nitrogen nucleophiles 4a‐f to afford 2‐substituted pyrido[4,3d]pyrimidine 5–8 , pyrimido[i]1,5a‐diaza‐9‐oxafluorene 9 and pyrimido[i]5a‐aza‐9‐thiafluorene 10 derivatives. Also, compound 3 reacted with active methylene compounds 4j to yield pyrimidine derivatives 14–16 which on reaction with EtONa 4k afforded 1,5,7‐triaza‐10‐oxaphenanthrene derivatives 17–19 .     

基于磺酰基杯[4]芳烃的Co16笼簇的合成、结构及电化学性质

以氯化钴、 对叔丁基磺酰杯[4]芳烃(H₄TC4A-SO₂)和非对称性3-(1H-四唑-5-基)苯甲酸(H₂L)为原料, 通过溶剂热法合成了一个具有四面体配位笼结构的16核化合物[Co₁₆(TC4A-SO₂)₄(OH)₄(L)₈]·[(C₈H₂₀N)(C₄H₁₂N)₂(C₂H₈N)]·solvent(Co₁₆-TC4A-SO₂). 采用X射线单晶衍射、 X射线粉末衍射、 热重分析、 红外光谱方法对配合物进行了表征. 将Co₁₆-TC4A-SO₂笼簇直接负载到碳纸上(Co₁₆-TC4A-SO₂/CP)用作工作电极, 其对析氧反应(OER)展现出较好的催化性能. 在1 mol/L KOH中, Co₁₆-TC4A-SO₂/CP在343.8 mV的过电位下达到10.0 mA/cm ²电流密度, Tafel斜率为79.31 mV/dec, 并且在20.0 mA/cm ²电流密度下表现出长达48 h的催化稳定性.     

基于一维[H_2Mo_4O_(14)]_n~(2n-)链和双吡啶双酰胺配体的三维锌配合物的合成、结构与性能

选择柔性的双吡啶双酰胺配体N,N'-双(3-吡啶甲酰胺基)-1,2-乙烷(3-bpye)、钼酸铵和氯化锌在水热条件下自组装制备了一个基于一维[H_2Mo_4O_(14)]_n~(2n-)链的三维锌配合物[Zn(3-bpye)(H_2Mo_4O_(14))(H_2O)_2],并通过元素分析、红外光谱、热重分析等技术手段研究了配合物的结构,并利用X射线单晶衍射分析进行了晶体结构表征。结构解析揭示标题配合物是三斜晶系,P-1空间群,晶胞参数a=0.61310(3)nm,b=1.04750(6)nm,c=1.06540(6)nm,α=78.5540(10)°,β=77.5350(10)°,γ=89.9050(10)°,V=0.65420(6)nm~3,M_r=981.47,D_c=2.491 g/cm~3,Z=1,F(000)=468,R_1=0.0290,ωR_2=0.1068。标题配合物中,金属锌离子连接一维[H_2Mo_4O_(14)]_n~(2n-)链形成一种二维无机双金属层[Zn(H_2Mo_4O_(14))]_n,相邻的层间又通过双齿配体3-bpye连接形成三维CdSO_4拓扑的骨架结构。配合物表现出强的荧光发射特性,而且其在紫外光照下对亚甲基蓝和罗丹明B均有明显的催化降解活性。     

Co/Al_2O_3-SiO_2催化剂的F-T反应性能的研究

通过浸渍法制备不同含量SiO_2改性的Co/Al_2O_3催化剂,结合N2吸附-脱附、XRD、H2-TPR、XPS等表征手段,研究SiO_2助剂对钴基催化剂物相结构、还原行为及F-T合成性能的影响。结果表明,适量的SiO_2改性后,有效地减弱了载体与活性组分钴之间的相互作用,显著地提高了催化剂的还原度和催化活性。但继续增加SiO_2的含量,催化剂的还原度继续提高,分散度同时下降32%,与未改性之前相比,催化剂的活性基本没有改变。     

Co-Mo/SiO2-Al2O3润滑油加氢处理催化剂的制备

以Pluronic P₁₂₃作结构导向剂,采用Al （NO₃）₃-NaAlO₂双水解法合成氧化铝,在成胶过程中加入正硅酸乙酯,制备硅质量分数分别为5%、10%、15%的SiO₂-Al₂O₃载体,并通过共浸渍法制备出Co-Mo/SiO₂-Al₂O₃润滑油加氢处理催化剂。通过XRD、N₂吸附-脱附、Py-FTIR、NH₃-TPD、H₂-TPR、TEM和XRF等手段对载体及催化剂的性质进行表征。结果表明,硅质量分数为10%的SiO₂-Al₂O₃具有优良的孔结构、较多的中强酸以及部分有序的介孔结构。以此为载体制备的Co-Mo/10% SiO₂-Al₂O₃催化剂中,MoS₂颗粒均匀地分散在载体上,具有更多的B酸性位和Ⅱ型CoMoS活性相。以减二线蜡油为原料油的固定床活性评价结果表明,生成油中主要组分为链烷烃与环烷烃;尤其Co-Mo/10% SiO₂-Al₂O₃催化剂具有优良的加氢性能,在15 MPa、380℃、氢油比为1000、空速为0.6 h^-1的反应条件下,其HDS和HDN数值均超过99%,产品中S含量小于10 μg/g,N含量小于2 μg/g,可以满足后续异构脱蜡等对原料的要求。     

A Novel Ferroferric Polyoxotungstate:Synthesis,Structure and Magnetic Properties of Na5[Fe2.5(H2O)10W12O42]·ca.32 H2O

Due to the variety of their components, structures and properties, significant attention continues to be focused on the polyoxometalatic anions in many research fields such as catalysis, biology, medicine and materials science¹. When the aqueous solution of Na₂WO₄·2H₂O was reduced by iron powder in CH₃COOH (30%), crystals of Na₅[Fe_2.5(H₂O)₁₀W₁₂O₄₂]·ca.32 H₂O 1, which crystallizes in the triclinic space group P 1 with a=12.121(2), b=12.426(3), c=l3.247(3) Å, α=68.33(3), β=71.33(3), γ=71.44(3)° and Z=l, precipitated after several weeks.