A simplified,miniature TEA-CO2 laser using a semiconductive pre-ionization technique

Using a pre-ionization system based on a silicon carbide compound and a pulse-forming network using a vacuum relay, we have been able to significantly reduce TEA0-CO₂ laser complexity while maintaining high output energy densities. The design and construction are detailed along with the experimentally obtained laser characteristics.     

Short single-mode CO2 laser pulse generation by pulsed Q-switching

A simple method for the generation of short, single-mode CO₂ laser pulses produced by applying two voltage gates (of amplitude 3U_λ/4 and U_λ/4) to an electro-optic Q-switch placed in a three-mirror cavity is proposed. Single, single-mode, well-synchronizable pulses of 3 ns duration and of 3 mJ energy have been experimentally achieved from a TEA CO₂ laser with an intracavity Pockels cell with 3 ns switching time. Using a numerical simulation it is shown that with shorter switching time (≈1 ns) the method enables one to obtain, from such a laser, a single, megawatt pulse of 1 ns duration.     

Advanced CO2 laser rangefinders

Factors affecting the design of compact heterodyne- and direct-detection systems are contrasted. Recent UK achievements are placed in context: a TEA laser direct-detection rangefinder and a chirp-pulse-comparison rangefinder-velocimeter are described.     

Pulse behaviour of a compact RF discharged CO2 slab laser

We present the measurements made on a medium power, 35 cm long, radio-frequency discharge CO₂ slab laser operated in a pulsed regime obtained by switching the RF discharge. In this way, pulses with peak power up to 480 W at pulse repetition frequencies in the range 1 to 10 kHz have been obtained. Pulse energy and average extracted power have been experimentally characterized with respect to the pulse repetition frequency and to the pulse duration, and the pulse shape and characteristic times have been measured. We also investigated the propagation properties of the beam emerging from our laser.     

Current CO2 laser surgery

With the development of suitable instrumentation, human-engineered to fulfil the requirements of the clinical surgeon and designed to fit in with the physical conditions prevailing in the operating theatre, laser surgery has advanced rapidly in the past few years. It shows signs of even more rapid progress and general acceptance as its application and advantages in more and more fields of surgery are demonstrated.     

A continuously variable attenuator for the CO2 laser

A continuously variable attenuator for the CO₂ laser, causing minimal degradation of beam quality, is implemented using rotating ZnSe wedges, and is capable of transmissivities between 0.3% and 18%, and between 27% and 89%. The transmissivity at any particular setting was measured to be essentially constant for wavelengths from 9.27 μm (9R20) to 10.77 μm (10P36).     

CO2 laser welding of copper slabs

For the first time it has been possible to laser weld copper sheets up to 3 mm thick with a 2 kW cw CO₂ laser. The main questions arising from the process are indicated.     

Longitudinal mode rejection in TEA-CO2 oscillators

A short-cavity single-longitudinal-mode mini TEA-CO₂ laser is described and an experimental study of the effect of cavity length tuning on the mode intensity rejection is presented. A simple model based on longitudinal mode competition adequately explains the observations.     

Fir laser emissions from population inversion transition by TEA-CO2 laser pumping

In this paper, the numerical analysis is given which is applicable for a TEA-CO₂ laser pumping in search of effective pumping method.The analysis also can estimate the optimum pressure for a given molecule and a given pulse laser.Also we report in this work many FIR laser emissions from population inversion transition which have never observed before using a TEA-CO₂ laser.     

Mathematical modelling of gain-switched RF-excited CO2 waveguide laser

The detailed mathematical models for the evolution of light pulses in RF-excited CO2 waveguide lasers are derived. Explicit expressions for the pulse characteristics in RF-excited CO2 waveguide lasers are obtained. The effects of losses and unsaturated gain on output power are calculated.     

A compact, highly stable CW CO2 laser without brewster windows

We describe an open resonator, quasi sealed-off; 70cm cavity length CO₂ laser with very high stability of power and frequency, which lases on 96 lines from 9R42 (2W) to 10P52 (5W) with a power of >11W on 9R20, 9P20, 10R20 and 10P20, plus on 18 hotband lines with ≈2W. This laser was used successfully to pump an FIR ring laser [1] enabling an FIR power stability of ΔP/P ≈ 10⁻⁴ by use of a simple PI control loop, thus demonstrating its superb frequency stability.     

Detection of small N2O concentrations using a frequency doubled CO2 laser

A reliable procedure for remote high-accuracy laser detection of N₂O as one of the principal destroyers of the protective ozone layer of the Earth has been developed. The procedure is based on using a CO₂-laser system emitting efficiently in the 4.5 μm range. In this case lasing from isotopic modification ¹²C¹⁸O₂ of carbon dioxide with its subsequent frequency doubling by a nonlinear crystal is used. With the object of reducing the price the composition of the active medium (both for TEA laser and low-pressure longitudinal-discharge-excitation laser) has been optimized. New high-efficiency intracavity frequency doubling schemes based on nonlinear AgGaSe₂ crystals have been developed for CO₂-lasers of both types. Low concentrations of N₂O and concentrations of the principal background gases CO and H₂O have been measured under real atmosphere conditions with the aid of the lidar complex built around these lasers.     

Various techniques for producing a single longitudinal mode TEA-CO2 laser

Techniques used for producing a single longitudinal mode TEA-Co₂ laser are described. The simplest technique seems to be a double unstable resonator.     

Mathematical modeling of CO2 TEA laser

Five and six-temperature models for the CO₂–N₂–He system are used to describe the process of the dynamic emission in the TEA CO₂ laser. All physical constants and relaxation rates related to these models are examined to estimate the output pulse parameters as a function of the input parameters. The two pumping processes implemented; empirical function and differential equation show a good agreement with the experimental data.     

Temperature distribution along oversized hollow-core waveguides for CO2 laser radiation

Temperature distributions along various hollow waveguides are fully analysed experimentally when the waveguides are excited by CO₂ laser light. It is shown that the temperature decreases in an oscillatory manner along the waveguides due to the interference effect of guided modes. The distributors are well explained by a theory developed previously.     

Continuous-wave diode-pumped operation of an Yb:NaLa(WO4)2 laser at room temperature

Room-temperature continuous-wave (cw) laser operation is demonstrated with the newly developed Yb:NaLa(WO₄)₂ disordered crystal by end-pumping with a fiber-coupled diode laser. A maximum output power of 330 mW is obtained with an optical efficiency of 4.9% and a slope efficiency of 6.3% with respect to the incident pump power. The efficiencies in terms of the absorbed pump power are roughly three times higher. Sellmeier dispersion curves for the ordinary and extraordinary refractive indices of the NaLa(WO₄)₂ host are reported along with crystallographic and spectroscopic properties related to the Yb³⁺-doping.     

基于TiO_2纳米粒子薄膜的低阈值随机激光器的动力学研究

本文利用共轭聚合物(MEH-PPV)覆盖TiO_2纳米粒子薄膜制作随机激光器。随机TiO_2纳米粒子薄膜的激光辐射阈值比平面MEH-PPV薄膜的放大自发辐射阈值缩小了9倍。这是由于TiO_2纳米粒子诱导的多重散射造成的。进一步的飞秒荧光上转换实验表明,随机激光器中,光在增益介质里的停留时间有所增加,这直接证实了光在随机激光器结构中的多重散射引起光的传播路径增加。因此,这会促进更多的光发生辐射,从而降低随机激光器的阈值。     

Fracture mechanisms of Hg0.8Cd0.2Te induced by pulsed TEA-CO2 laser

The fracture mechanisms of Hg_0.8Cd_0.2Te induced by pulsed TEA-CO₂ laser have been investigated theoretically and experimentally in this paper. The Hg_0.8Cd_0.2Te target was irradiated by a TEA-CO₂ laser with wavelength of 10.6 μm and spike width of 240 ns in an ambient atmosphere. The evident cracks can be found on the surface of the target from the scanning electron microscopy (SEM) photos, indicating that the severe breaks happened during the experiment. Theoretical analysis has also been carried out and the results show that the fracture of Hg_0.8Cd_0.2Te is mainly induced by thermal stresses, although there are three forces (thermal stress, evaporation wave and laser-supported detonation (LSD) wave) exerted on the target surface during the process.     

In-process high power CO2 laser beam position sensing

The case for in-process sensing is one of the strengths of laser materials processing, both in the variety of signals obtainable from the process and the range of techniques for beam guidance. It is known that beam/nozzle alignment is of importance for high quality laser cutting. Thus, an in-process beam position sensing system was devised in this study as one of the potential tools for automation of the cutting process. Further, if the beam could be stabilized at a given location automatically this would be equivalent to relocating the laser beam. Laser beam position sensing is the first step towards this goal. The aim of this study is to create a beam position sensing system. This work presents a new approach using a rotating slit, a focusing lens and a photodetector. An automatic alignment procedure is also investigated.