Binding and chemical fractionation of heavy metals in typical peat matter

Laboratory batch studies were conducted to evaluate the binding capacity and the mobility of metal species bound to typical humus peat matter. The identification of phase composition of mineral fractions and functional groups in the organic matter was assessed. The results showed generally high, but different retention capacity and binding strength, suggesting distinct diversity in binding mechanisms, phases and chemical nature of binding sites, depending on the metal species and their input concentrations. In general, the binding capacity of peat for the metal ions studied follows the order: Cr(3+) > Cu(2+) > Zn(2+) > Cd(2+) and results in the decrease of pH in the same order, due to displacement of H(3)O(+) from the peat by metal ions. The highest metal enrichment occurs in fractions F1(EXC), F2(CARB), F4(MRO) and F5(OM) of different binding strength adequate to exchangeable, carbonatic, moderately reducible amorphous Fe-oxide and organic/ sulphidic fractions in soils and sediments. In relation to species distribution in peats, the prevailing part of Cr(3+) is strongly bound in oxidizable organic substrate, while Cu(2+) is highly enriched in the moderately reducible F4(MRO) and the most labile F2(EXC) fractions. Cd(2+) and Zn(2+) are predominantly bound in the labile F1(EXC) and F2(CARB) fractions. Diversity of the predominant binding phases for the studied metals suggests rather weak competition for binding sites between chromium and copper ions; the strongest competition between the sorbed metal ions is anticipated for F1(EXC) and F2(CARB) fractions.     

The use of ESI-MS to probe the binding of divalent cations to calmodulin

Proteins have evolved with distinct sites for binding particular metal ions. This allows metalloproteins to perform a myriad of specialized tasks with conformations tailor-made by the combination of its primary sequence and the effect on this of the ligated metal ion. Here we investigate the selectivity of the calcium trigger protein calmodulin for divalent metal ions. This ubiquitous and highly abundant protein exists in equilibrium between its apo and its holo form wherein four calcium ions are bound. Amongst its many functions, calmodulin modulates the calcium concentration present in cells, but this functional property renders it a target for competition from other metal ions. We study the competition posed by four other divalent cations for the calcium binding sites in calmodulin using electrospray ionization mass spectrometry (ESI-MS). We have chosen two other group II cations Mg²⁺, Sr²⁺, and two heavy metals Cd²⁺, Pb²⁺. The ease with which each of these metals binds to apo and to holo CaM[4Ca] is described. We find that each metal ion has different properties with respect to calmodulin binding and competition with calcium. The order of affinity for apo CaM is Ca²⁺ ≫ Sr²⁺ ∼ Mg²⁺ > Pb²⁺ ∼ Cd²⁺. In the presence of calcium the affinity alters to Pb²⁺ > Ca²⁺ > Cd²⁺ > Sr²⁺ > Mg²⁺. Once complexes have been formed between the metal ions and protein (CaM:[xM]) we investigate whether the structural change which must accompanies calcium ligation to allow target binding takes place for a given CaM:[xM] system. We use a 20 residue target peptide, which forms the CaM binding site within the enzyme neuronal nitric-oxide synthase. Our earlier work (Shirran et al. 2005) [1] has demonstrated the particular selectivity of this system for CaM:4Ca²⁺. We find that along with Ca²⁺ only Pb²⁺ forms complexes of the form CaM:4M²⁺:nNOS. This work demonstrates the affinity for calcium above all other metals, but also warns about the ability of lead to replace calcium with apparent ease.     

Influence of metal ions on the interaction between gatifloxacin and calf thymus DNA

To study the interaction between gatifloxacin (GT), metal ions (Cu²⁺, Cd²⁺, Co²⁺, Mg²⁺) and calf thymus DNA under condition of physiology pH, UV absorption and fluorescence methods were adopted. Result shows that metal ions and DNA are able to react with GT in ground state. In further research, by studying the influence of metal ions on binding of GT with DNA in metal ions–GT–DNA ternary system, we found that influential mechanism of Mg²⁺ on the binding of GT with DNA may be different from the other three. Mg²⁺ can act as a bridge in the binding of GT's carboxyl/carbonyl with DNA phosphate in certain concentration range; while Cu²⁺, Cd²⁺, Co²⁺ can combine directly with GT by reaction between GT carboxyl/carbonyl and DNA base, and enhance the binding ability of GT with DNA. The influence extent and type depend not only on the binding site of DNA with metal ions (phosphate or base), but also the binding ability of which. The stronger the binding ability of metal ions with DNA base is, the larger their promotion to binding of GT with DNA is. The order of metal ions’ influential ability on the binding of GT–DNA is identical to the binding ability order of metal ions with DNA base, that is: Cu²⁺ > Cd²⁺ > Co²⁺ > Mg²⁺.     

Sorption of metal ions to untreated,alkali-treated and peroxide-bleached TMP

Knowledge about how different metal ions are bound to pulp fibers is very important for optimal metal management in pulping processes. A column chromatographic method was used to assess the differences in affinity of 14 metal ions to untreated, alkali-treated and peroxide-bleached thermomechanical pulp (TMP). A method of competition between cations in the column chromatographic experiments was used in the sorption experiments, with an excess of each metal ion compared to the total capacity of the pulp studied. The method is very sensitive and even small differences in affinities can be detected. By combining the results from sorption experiments with four different metal ion mixtures the following order of affinity was obtained: Pb²⁺ ≫ Cu²⁺ ≫ Cd²⁺ > Zn²⁺ > Ni²⁺ > Ba²⁺ > Ca²⁺ > Mn²⁺ > Sr²⁺ > Mg²⁺ ≫ Rb⁺ ≈ K⁺ > Na⁺ > Li⁺. All three types of pulps showed the same affinity order. Lead and copper ions were clearly most strongly bound to the pulp fibers. Within the alkali and alkaline earth metal groups the differences in affinity were quite small. The sorption of metal ions to pulp fibers takes place mainly by complexation, where the divalent metal ions are coordinated to functional groups (acid groups) in the fiber phase. Protonation constants and concentrations of acid groups were determined by potentiometric titration. A model with two carboxyl groups and two phenolic hydroxyl groups satisfied best the experimental data. By treatment with alkali and peroxide new acid groups were created and the total binding capacity of hydrogen ions increased from 137 μeq/g for untreated pulp to 187 and 228 μeq/g for alkali-treated and peroxide-treated pulp, respectively.     

Effect of some environmental ligands on the sorption of radionuclidesby peat humin

Summary In a previous paper we studied the interaction of the radionuclides ^110mAg, ⁶⁰Co and ⁶⁵Zn with peat humin. These nuclides are among the fission or corrosion products in nuclear reactors. The aim of this paper is to study the effect of certain ligands, which are present in the environment, such as humic acid, fulvic acid, EDTA and urea, on the sorption of these radionuclides by humin. The obtained results indicated that urea has no effect on the sorption of Co and Zn by humin, and only a little in case of Ag. However, the presence of the other ligands (humic acid, fulvic acid or EDTA) leads to different decreases in the sorption of the three nuclides by humin. The results are interpreted in the light of the complex formation between ligands and the metal cations and of the strength of binding of these cations to the humin sorbent. The release of Ag⁺in the presence of different ligands was found to follow the order: humic acid>EDTA>fulvic acid>urea. In the case of both Co²⁺and Zn²⁺, the sequence is changed to be: EDTA>humic acid>fulvic acid>urea, with a higher release in the case of Zn²⁺. The results showed that cobalt is bound more strongly to humin than silver and zinc. The sulphur content of the humic fractions plays a significant role in the competition for silver and zinc.     

Binding of some first-row transition metal ions by a poly(iminoethylene)dithiocarbamate copolymer

The binding of the transition metal ions VO²⁺, Fe²⁺, Fe³⁺, CO²⁺, Co³⁺, Ni²⁺ and Cu²⁺ by a poly(iminoethylene) dithiocarbamate copolymer has been investigated by uptake studies and physical measurements (electronic, IR, and ESR spectra and magnetic susceptibility). Metal ions may be bound by both the dithiocarbamato and amino groups of the co-polymer. Binding to nitrogen (in addition to binding to sulphur) increases in the order FE(II)<Ni(II)<Cu(II) and accounted for increasing metal ion uptake by the copolymer in the same order. Factors which determine the relative uptake of the metal ions by the copolymer are discussed.     

Extraction and preconcentration capacity of bifunctionalized diamine-thiol polysiloxane immobilized ligand system towards some divalent cations

Porous solid bi-organofunctionalized diamine-thiol polysiloxane immobilized ligand system of the general formula P-(CH₂)₃- X, (where P represents [Si-O]_n siloxane network and X represents a mixture of diamine; -NH(CH)₂NH₂ and thiol; -SH functional groups) has been prepared by hydrolytic polycondensation of TEOS with a mixture of 3-mercaptopropyltrimethoxysilane and 3- (2-aminoethylimino)propyltrimethoxysilane agents. The ligand system was evaluated for extraction and preconcentartion of a series of divalent metal ions from aqueous solutions including: Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺. Both batch and dynamic methods were used to examine maximum sorption capacity. The maximum binding capacity followed the sequence; Cu²⁺ > Pb²⁺ > Cd²⁺ > Ni²⁺ > Zn²⁺ > Co²⁺ at pH 5.5. Measurement of variation of sorption of metal ions with temperature yielded negative values of ΔG° and positive values of ΔS° and ΔH° indicating a spontaneous and endothermic process of binding metal ions to the ligand system.     

Voltammetric study of metal ions binding by biindolizine heterocyclophanes and their acyclic analogues

The binding of ions Li⁺, Na⁺, K⁺, (group I), Mg²⁺, Al³⁺, Ga³⁺ (group II), Ca²⁺, Pb²⁺ (group III) ions, Ba²⁺ and paraquat by heterocyclophanes containing biindolizine and quinoxaline fragments connected by 3,6,9-trioxaundecane and 5,8,11,14,17-pentaoxageneicosane spacers, and also their acyclic analogues, in the acetonitrile-0.1 M Bu₄NBF₄ is studied by cyclic voltammetry. A conclusion is drawn that the ions of the group I are not bound by these compounds; the paraquat is not bound by heterocyclophane with the 5,8,11,14,17-pentaoxageneicosan spacers. For ions of the group II, reversible redox-switchable binding by the macrocycles with the 3,6,9-trioxaundecane and 5,8,11,14,17-pentaoxageneicosan spacers is observed: the initial compounds show the binding; their radical cations and dications do not. The binding of the ions of the group III and Ba²⁺ is determined by the macrocycles’ size. In particular, these ions are bound not only by the heterocyclophane with 3,6,9-trioxaundecane spacers but also by its radical cation or dication. The binding results in the corresponding dication stabilization. The heterocyclophane with the 5,8,11,14,17-pentaoxageneicosan spacers demonstrates the redox-switchable binding of Ca²⁺ and Pb²⁺ ions; no effect of Ba²⁺ ions on the cyclic voltammograms of this heterocyclophane was observed. In the ternary system “heterocyclophane with 3,6,9-trioxaundecane spacers + ions of the group II (Al³⁺, Ga³⁺) + ions of the group III (Ca²⁺, Pb²⁺)” either primary binding of the group III ion Pb2+ or concurrent binding of the ions of the group II and the group III, with the system’s reversible redox-switching from one metal complex to another, was observed.     

Metal distribution and binding in balneological peats and their aqueous extracts

Binding of metals in typical bath peat samples (“Großes Gifhorner Moor”, Sassenburg/North Germany) and their aqueous extracts was characterized by means of a multi-method approach. For that purpose a sequential extraction procedure based on peat-filled chromatography columns was developed. Water-soluble metal and DOM (dissolved organic matter) fractions were subdivided by use of a stepwise increased pH gradient (pH 3.8–5), finally by the chelator EDTA and 0.1 mol L^–1 hydrochloric acid. Metal fractions very strongly bound to peat were assessed by an aqua regia extraction. Metal determinations required were performed by atomic spectrometry methods (AAS, ICP–OES, and TXRF). The metal and DOM concentrations in the peat extracts varied significantly, depending on the natural variety of the peat matter under study (e.g., Al: 25–674, Cd: 0.05–0.2, Cu: 5– 15.4, Fe: 77–1785, Mn: 21–505, Ni: 2–33, Pb: < 1, Zn: 9– 715 (μg L^–1); Na: 8–45, K: 1.3–14.9, Ca: 2–51, Mg: 1.1– 7.9 (mg L^–1); 26–73 mg L^–1 DOC). An increase of the pH increased the DOC (dissolved organic carbon) of the peat extracts, but hardly the concentration of heavy metals. The latter could only be re-mobilized by EDTA and dilute hydrochloric acid. Additional investigations of the peat extracts using tangential-flow ultrafiltration revealed that the heavy metals extracted at pH < 4 were predominantly dissociated. At higher pH (pH > 4.5) they were preferentially bound to macromolecular DOM. Moreover, using multistage ultrafiltration the size distribution of the DOM and their metal species was assessed.     

Spectrophotometric study of complexation of dibenzopyridino-18-crown-6 with some transition and post-transition metal ions in DMSO solution using murexide as a metallochromic ligand

The complexation reaction of dibenzopyridino-18-crown-6 (DBPY 18C6) with Co²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Hg²⁺, and Ag⁺ have been studied in DMSO at 25°C by the spectrophotometric method. Murexide was used as a competitive colored ligand. The stoichiometry of metal ion-murexide and metal ions with DBPY18C6 complexes were estimated by mole ratio and continuous variation methods and emphasized by the KINFIT program. The stoichiometry of all the complexes was found to be 1: 1 (metal ion/ligand). The order of stability constants for the obtained metal ion-murexide complexes (1: 1) varies in the order Cu²⁺ > Cd²⁺ > Co²⁺ ∼ Pb²⁺ > Zn²⁺ > Ag⁺ > Hg²⁺. This trend shows that the transition metal ions clearly obey the Irving-Williams role. For the post-transition metal ions, the ionic radius and soft-hard behavior was the major affects in varying of this order. The dibenzopyridino-18-crown-6 complexes with the used metal ions vary as Ag⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺ > Hg²⁺ > Zn²⁺ > Co²⁺. The article is published in the original.     

Conditional Stability Constant Determination of Metal-Fulvic Acid Complexes

Abstract

Conditional stability constants for metal complexes of a terrestrial fulvic acid were determined using an ion-exchange chromatography—atomic absorbance spectroscopy method. Employing the Scatchard model, conditional stability constants were determined for the metal (II) fulvic acid complexes of cadminum, copper, lead, nickel, manganese, and zinc. The order of metal binding by the fulvic acid was determined to be: Cu > Ni > Pb > Zn > Cd > Mn. Complexes of weakly bound metal ions were determined with an added metal ion concentration of 2 × 10^–5 M to 1 × 10^–4 M while complexes of strongly bound metal ions were determined with an added metal ion concentration of 1 × 10^–5 M to 8 × 10^–4 M. The fulvic acid concentration was kept constant at 4 × 10^–4 M. The effect of pH and ionic strength on the copper-fulvic acid complex also was investigated.     

Counterion binding by poly(styrenesulfonate)

Binding isotherms of poly(styrenesulfonate) with hydrogen and selected alkali ions have been determined by dialysis equilibrium and dye spectroscopy, employing Pb²⁺, Mg²⁺, and Ca²⁺ as the competing divalent ions. The observed degrees of counterion binding, Θ_z, defined as the number of bound counterfoils of valence z per poly ion site-group, agree quite well with those predicted by Manning's two variable theory. The binding preference follows the order Cs⁺ > Rb⁺ > K⁺ > Na⁺ > H⁺ >Li⁺, indicating that the binding process is of a territorial nature. Independently performed light scattering measurements show that a plot of the radius of gyration, >S _z>, against the actual polyion charge gives a sigmoidal curve. This result is taken to indicate that (1) a polyion is, in general, not completely neutralized in the Θ-state and that (2) a polyion may be not fully stretched when the polyion charge density is largest.     

Preparation of hydrazinodeoxycellulose and carboxyalkyl hydrazinodeoxycelluloses and their adsorption behavior toward heavy metal ions

Nitrogen-containing cellulose derivatives hydrazinodeoxycellulose (HDC) and carboxyalkyl hydrazinodeoxycelluloses (α- and β-CAHDCs) were prepared from 6-chlorodeoxycellulose (CDC). Their adsorption of divalent transition metal ions was determined from dilute aqueous solutions and compared with that of aminoalkyl celluloses (AmACs) reported previously. HDC scarcely adsorbs metal ions in the pH range of 1–2, whereas α- and β-CAHDCs adsorb metal ions in this pH range. However, the adsorption of metal ions on HDC increases rapidly with increasing pH and HDC more effectively adsorbs metal ions than α- and β-CAHDCs in weakly acidic conditions. The ability to adsorb Cu²⁺ ions was in the order of AmAC (carbon number in the diamine moiety m = 2) > HDC > α-CAHDC > β-CAHDC in the weakly acidic region. These adsorbents selectively adsorb Cu²⁺ ions from the solutions containing other metal ions such as Mn²⁺, Co²⁺, and Ni²⁺, and the Irving–Williams series is obeyed in these adsorbent/metal ion systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3359–3363, 1997     

Synthesis and Chelating Properties of Polystyrene Supported Schiff Base (N,N′-disalicylidenepropylenetriamine) Resin Toward Some Divalent Metal Ions

A new polystyrene-supported Schiff base resin, N,N-bis(salicylidenepropylenetriamine)- aminomethyl polystyrene, has been synthesized through a reaction between the commercially available 4-chloromethyl polystyrene polymer and the Schiff base, N,N′-disalicylidenepropylenetriamine. The chelation behavior of this resin toward the divalent metal ions Cu^{2 +}, Ni^{2 +}, Zn^{2 +}, and Pb^{2 +} in aqueous solutions was investigated. Batch equilibration experiments were carried out as a function of contact time, pH, amount of metal-ion, polymer mass, and temperature. The amount of metal-ion uptake of the polymers was determined by using atomic absorption spectrometry (AAS). Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Cu^{2 +} and that the metal-ion uptake follows the order: Cu^{2 +} > Zn ^{2 +} > Ni^{2 +} > Pb²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed.     

A theoretical study of cation--π interactions: Li+, Na+, K+, Be2+, Mg2+ and Ca2+ complexation with mono- and bicyclic ring-fused benzene derivatives

DFT (B3LYP functional) and MP2 methods using 6-311+G(2d,2p) basis set have been employed to examine the effect of ring fusion to benzene on the cation--π interactions involving alkali metal ions (Li⁺, Na⁺, and K⁺) and alkaline earth metal ions (Be²⁺, Mg²⁺ and Ca²⁺). Our present study indicates that modification of benzene (π-electron source) by fusion of monocyclic or bicyclic (or mixture of these two kinds of rings) strengthens the binding affinity of both alkali and alkaline earth metal cations. The strength of interaction decreases in the following order: Be²⁺ > Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺ > K⁺ for any considered aromatic ligand. The interaction energies for the complexes formed by divalent cations are 4–6 times larger than those for the complexes involving monovalent cations. The structural changes in the ring wherein metal ion binds are examined. The distance between ring centroid and the metal ion is calculated for all of the complexes. Strained bicyclo[2.1.1]hexene ring fusion has substantially larger effect on the strength of cation--π interactions than the monocyclic ring fusion for all of the cations due to the π-electron localization at the central benzene ring.     

New coumarin-based sensor molecule for magnesium and calcium ions

A new coumarin-based sensor molecule (L₁) has been synthesized and this was found to bind calcium and magnesium ions more effectively as compared to other alkali/alkaline earth/lanthanide and certain transition metal ions. A significant enhancement in fluorescence intensity was observed on binding to Ca²⁺ and Mg²⁺ ions; while a minor quenching was observed for weakly bound Hg²⁺, Ni²⁺, Fe³⁺, and Co²⁺ ions. PET process, coupled with the ICT process, is proposed to explain the observed spectral response.     

Cation-Induced Stabilization of Protein Complexes in the Gas Phase: Mechanistic Insights From Hemoglobin Dissociation Studies

Collision-induced dissociation (CID) of electrosprayed protein complexes usually involves asymmetric charge partitioning, where a single unfolded chain gets ejected that carries a disproportionately large fraction of charge. Using hemoglobin (Hb) tetramers as model system, we confirm earlier reports that bound metal ions can stabilize protein complexes under CID conditions. We examine the mechanism underlying this effect. Nonvolatile salts cause extensive adduct formation. Significant stabilization was observed for Mg²⁺ and Ca²⁺, whereas K⁺, Rb⁺, and Cs⁺ had no effect. Precursor ion selection was used to examine Hb subpopulations with well-defined metal binding levels. K⁺, Rb⁺, and Cs⁺-adducted tetramers eject monomers that carry roughly one-quarter of the metal ions that were bound to the precursor. This demonstrates that charge migration during CID is exclusively due to proton transfer, not metal ion transfer. Also, replacement of highly mobile charge carriers (protons) with less mobile species (metal ions) does not exert a stabilizing influence under the conditions used here. Interestingly, Hb carrying stabilizing ions (Mg²⁺ and Ca²⁺) generates monomeric CID products that are metal depleted. This effect is attributed to a combination of two factors: (1) Me²⁺ binding stabilizes Hb via formation of chelation bridges (e.g., R-COO^– Me^{2+ –}OOC-R); the more Me²⁺ a subunit contains the more stable it is. (2) More than ~90 % of the tetramers contain at least one subunit with a below-average number of Me²⁺. The prevalence of monomeric CID products with depleted Me²⁺ levels is caused by the tendency of these low metal-containing subunits to undergo preferential unfolding/ejection.

Cation exchange, interlayer spacing, and thermal analysis of Na/Ca-montmorillonite modified with alkaline and alkaline earth metal ions

Na-montmorillonites were exchanged with Li⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺, while Ca-montmorillonites were treated with alkaline and alkaline earth ions except for Ra²⁺ and Ca²⁺. Montmorillonites with interlayer cations Li⁺ or Na⁺ have remarkable swelling capacity and keep excellent stability. It is shown that metal ions represent different exchange ability as follows: Cs⁺?>?Rb⁺?>?K⁺?>?Na⁺?>?Li⁺ and Ba²⁺?>?Sr²⁺?>?Ca²⁺?>?Mg²⁺. The cation exchange capacity with single ion exchange capacity illustrates that Mg²⁺ and Ca²⁺ do not only take part in cation exchange but also produce physical adsorption on the montmorillonite. Although interlayer spacing d ₀₀₁ depends on both radius and hydration radius of interlayer cations, the latter one plays a decisive role in changing d ₀₀₁ value. Three stages of temperature intervals of dehydration are observed from the TG/DSC curves: the release of surface water adsorbed (36?C84?°C), the dehydration of interlayer water and the chemical-adsorption water (47?C189?°C) and dehydration of bound water of interlayer metal cation (108?C268?°C). Data show that the quantity and hydration energy of ions adsorbed on montmorillonite influence the water content in montmorillonite. Mg²⁺-modified Na-montmorillonite which absorbs the most quantity of ions with the highest hydration energy has the maximum water content up to 8.84%.     

Study on complexation adsorption behavior of dibenzo-18-crown-6 immobilized on CPVA microspheres for metal ions

Dibenzo-18-crown-6 (DBC) was immobilized on crosslinked polyvinyl alcohol (CPVA) microspheres, resulting in polymer-supported crown ether DBC–CPVA. The complexation adsorption behaviors of DBC–CPVA microspheres towards diverse metal ions were investigated. The experimental results show that among alkali metal ions, the complexation adsorption ability of DBC–CPVA for K⁺ ion is the strongest, and crown ether-metal complex in 1:1 ratio is formed, exhibiting a high adsorption capacity. The adsorption capacities of alkali metal ions on DBC–CPVA are in the order: K⁺ ? Na⁺ > LI⁺ > Rb⁺ > Cs⁺. Among several divalent metal ions, DBC–CPVA exhibits stronger adsorption ability towards Zn²⁺ and Co²⁺ ions, and a “sandwich”-type complex is formed probably in a molar ratio of 2:1 between the immobilized DBC and Zn²⁺ ion as well as between the immobilized DBC and Co²⁺ ion. The adsorption capacities of the several divalent metal ions on DBC–CPVA are in the order: Zn²⁺ > Co²⁺ ? Cd²⁺ > Cu²⁺ > Ni²⁺ > Pb²⁺. The complexation adsorption is exothermic physical physisorption process, and raising temperature leads to the decrease of the adsorption capacity. At the same time, the entropy during the complexation adsorption decreases, so the adsorption process is driven by the decrease of enthalpy.