Desoxo molybdenum(IV) and tungsten(IV) bis(dithiolene) complexes: monomer-dimer interconversion involving reversible thiol bridge formation

Two series of thiol-bridged dimeric desoxo molybdenum(IV) and tungsten(IV) bis(dithiolene) complexes, [Et(4)N](2)[M(IV)(2)(SR)(2)(mnt)(4)] [M = Mo, R = (1) -Ph, (2) -CH(2)Ph, (3) -CH(2)CH(3), (4) -CH(2)CH(2)OH; M = W, R = (1a) -Ph, (2a) -CH(2)Ph, (3a) -CH(2)CH(3), (4a) -CH(2)CH(2)OH] and one monomeric desoxo complex, [Et(4)N](2)[WIV(SPh)(2)(mnt)(2)] (5a) are reported. These complexes are diamagnetic, and crystal structures of each of the complex (except 5a) exhibits a dimeric {M(IV)(2)(SR)(2)} core without any metal-metal bond where each metal atom possesses hexa coordination. The M-SR distance ranges from 2.437 to 2.484 Angstrom in molybdenum complexes and from 2.418 to 2.469 Angstrom in tungsten complexes. These complexes display Mo-S(R)-Mo angles ranging from 92.84 degrees to 96.20 degrees in the case of 1-4 and W-S(R)-W angles ranging from 91.20 degrees to 96.25 degrees in the case of 1a-4a. Interestingly, both the series of Mo(IV) and W(IV) dimeric complexes respond to an unprecedented interconversion between the dimer and the corresponding hexacoordinated monomer upon change of pH. This pH-dependent interconversion establishes the fact that even the pentacoordinated Mo(IV) and W(IV) bis(dithiolene) moieties are forced to dimerize; these can easily be reverted back to the corresponding monomeric complex, reflecting the utility of dithiolene ligand in stabilizing the Mo(IV)/W(IV) moiety in synthesized complexes similar to the active sites present in native proteins.     

Chemistry of [Et4N][MoIV(SPh)(PPh3)(mnt)2] as an analogue of dissimilatory nitrate reductase with its inactivation on substitution of thiolate by chloride

Structural-functional analogue of the reduced site of dissimilatory nitrate reductase is synthesized as [Et4N][MoIV(SPh)(PPh3)(mnt)2].CH2Cl2 (1). PPh3 in 1 is readily dissociated in solution to generate the active site of the reduced site of dissimilatory nitrate reductase. This readily reacts with nitrate. The nitrate reducing system is characterized by substrate saturation kinetics. Oxotransfer to and from substrate has been coupled to produce a catalytic system, NO3- + PPh3 --> NO2- + OPPh3, where NO3- is the substrate for dissimilatory nitrate reductase. The corresponding chloro complex, [Et4N][MoIV(Cl)(PPh3)(mnt)2].CH2Cl2 (2), responds to similar PPh3 dissociation but is unable to react with nitrate, showing the indispensable role of thiolate coordination for such oxotransfer reaction. This investigation provides the initial demonstration of the ligand specificity in a model system similar to single point mutation involving site directed mutagenesis in this class of molybdoenzymes.     

Mononuclear and dinuclear palladium and nickel complexes of phosphinimine-based tridentate ligands

The tridentate bis-phosphinimine ligands O(1,2-C(6)H(4)N=PPh(3))(2)1, HN(1,2-C(2)H(4)N=PR(3))(2) (R = Ph 2, iPr 3), MeN(1,2-C(2)H(4)N=PPh(3))(2)4 and HN(1,2-C(6)H(4)N=PPh(3))(2)5 were prepared. Employing these ligands, monometallic Pd and Ni complexes O(1,2-C(6)H(4)N=PPh(3))(2)PdCl(2)6, RN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][Cl] (R = H 7, Me 8), [HN(1,2-CH(2)CH(2)N=PiPr(3))(2)PdCl][Cl] 9, [MeN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][PF(6)] 10, [HN(1,2-CH(2)CH(2)N=PPh(3))(2)NiCl(2)] 11, [HN(1,2-CH(2)CH(2)N=PR(3))(2)NiCl][X] (X = Cl, R = iPr 12, X = PF(6), R = Ph 13, iPr 14), and [HN(1,2-C(6)H(4)N=PPh(3))(2)Ni(MeCN)(2)][BF(4)]Cl 15 were prepared and characterized. While the ether-bis-phosphinimine ligand 1 acts in a bidentate fashion to Pd, the amine-bis-phosphinimine ligands 2-5 act in a tridentate fashion, yielding monometallic complexes of varying geometries. In contrast, initial reaction of the amine-bis-phosphinimine ligands with base followed by treatment with NiCl(2)(DME), afforded the amide-bridged bimetallic complexes N(1,2-CH(2)CH(2)N=PR(3))(2)Ni(2)Cl(3) (R = Ph 16, iPr 17) and N(1,2-C(6)H(4)N=PPh(3))(2)Ni(2)Cl(3)18. The precise nature of a number of these complexes were crystallographically characterized.     

Reaction systems related to dissimilatory nitrate reductase: nitrate reduction mediated by bis(dithiolene)tungsten complexes

Kinetics of the oxygen atom transfer reactions [M(IV)(QC6H2-2,4,6-Pr(i)3)(S2C2Me2)2]1- + XO --> [M(VI)O(QC6H2-2,4,6-Pr(i)3)(S2C2Me2)2]1- + X in acetonitrile with substrates XO = NO3- and (CH2)4SO have been determined. The reactants are bis(dithiolene) complexes with M = Mo, W and sterically encumbered axial ligands with Q = O, S to stabilize mononuclear square pyramidal structures. The complex [MoIV(SC6H2-2,4,6-Pr(i)3)(S2C2Me2)2]1- is an analogue of the active site of dissimilatory nitrate reductase which in the reduced state contains a molybdenum atom bound by two pyranopterindithiolene ligands and a cysteinate residue. Nitrate reduction was studied with tungsten complexes because of unfavorable stability properties of the molybdenum complexes. Product nitrite was detected by a colorimetric method. All reactions with both substrates are second-order with associative transition states (deltaS approximately -20 eu). Variation of atoms M and Q, together with data from prior work, allows certain kinetics comparisons to be made. Among them, k2W/k2Mo = 25 for (CH2)4SO reduction (Q = S), an expression of the kinetic metal effect. Further, k2S/k2O = 28 and approximately 10(4) for nitrate and (CH2)4SO reduction, respectively, effects attributed to relatively more steric congestion in achieving the transition state with hindered phenolate vs thiolate ligands. The effect is more pronounced with the larger substrate. These results demonstrate the feasibility of tungsten-mediated nitrate reduction by direct atom transfer using molecules with both axial thiolate and phenolate ligands. Complexes of the type [M(IV)(OR)(S2C2Me2)2] are capable of reducing biological N-oxide, S-oxide, and nitrate substrates and thus constitute functional analogue reaction systems of enzymic transformations.     

Observation of divergent isotope effects as well as metal ion-modulated T(C) and spin-canting nature in isostructural supramolecular magnets

The ion-pair complexes of [4-NH(2)-PyH][M(mnt)(2)] (M = Pt for 1 and Ni for 3) and their deuterated analogues [4-NH(2)-PyD][M(mnt)(2)] (M = Pt for 2 and Ni for 4) are isostructural with each other. Four complexes crystalline in monoclinic space group C2/c, whose asymmetric unit consists of two halves of [M(mnt)(2)](-) anions and one cation, show quite similar cell parameters and almost identical packing structures as well. In the crystals of 1-4, two types of crystallographically inequivalent [M(mnt)(2)](-) anions construct individual layers, which are separated by the cation layer; the supramolecular networks are formed via the H-bonding interactions between the [M(mnt)(2)](-) and 4-NH(2)-PyH(+) (or 4-NH(2)-PyD(+)) ions as well as the weakly ππ stacking interactions between the [M(mnt)(2)](-) anions. The four isostructural complexes exhibit canted antiferromagnetism, arising from the non-collinearity of the magnetic moments between the crystallographically inequivalent anion layers, with T(C) ≈ 14.8 K for 1, 13.6 K for 2, 7.7 K for 3 and 8.8 K for 4, respectively. Ac magnetic susceptibility measurements revealed that 1 and 2 show spin canting, while 3 and 4 show hidden-spin canting characteristics. The isostructural 1 and 3 were deuterated to give the divergent isotope effects on the cell volume and T(C).     

A series of dinuclear homo- and heterometallic complexes with two or three bridging sulfido ligands derived from the tungsten tris(sulfido) complex [Et(4)N][(Me(2)Tp)WS(3)] (Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate)

The generation of heterobimetallic complexes with two or three bridging sulfido ligands from mononuclear tris(sulfido) complex of tungsten [Et(4)N][(Me(2)Tp)WS(3)] (1; Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate) and organometallic precursors is reported. Treatment of 1 with stoichiometric amounts of metal complexes such as [M(PPh(3))(4)] (M = Pt, Pd), [(PtMe(3))(4)(micro(3)-I)(4)], [M(cod)(PPh(3))(2)][PF(6)] (M = Ir, Rh; cod = 1,5-cyclooctadiene), [Rh(cod)(dppe)][PF(6)] (dppe = Ph(2)PCH(2)CH(2)PPh(2)), [CpIr(MeCN)(3)][PF(6)](2) (Cp = eta(5)-C(5)Me(5)), [CpRu(MeCN)(3)][PF(6)], and [M(CO)(3)(MeCN)(3)] (M = Mo, W) in MeCN or MeCN-THF at room temperature afforded either the doubly bridged complexes [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)M(PPh(3))] (M = Pt (3), Pd (4)), [(Me(2)Tp)W(=S)(micro-S)(2)M(cod)] (M = Ir, Rh (7)), [(Me(2)Tp)W(=S)(micro-S)(2)Rh(dppe)], [(Me(2)Tp)W(=S)(micro-S)(2)RuCp] (10), and [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)W(CO)(3)] (12) or the triply bridged complexes including [(Me(2)Tp)W(micro-S)(3)PtMe(3)] (5), [(Me(2)Tp)W(micro-S)(3)IrCp][PF(6)] (9), and [Et(4)N][(Me(2)Tp)W(micro-S)(3)Mo(CO)(3)] (11), depending on the nature of the incorporated metal fragment. The X-ray analyses have been undertaken to clarify the detailed structures of 3-5, 7, and 9-12.     

Molybdenum and tungsten complexes of sulfene (thioformaldehyde S,S-dioxide)

Propionitrile complexes fac-[M(CO)(3)(P-P)(NCEt)] (M = Mo (3), W (4); P-P = Ph(2)PCH(2)PPh(2) (a), Ph(2)PC(2)H(4)PPh(2) (b), Ph(2)PC(3)H(6)PPh(2) (c), (S,S)-Ph(2)PCHMeCHMePPh(2) (d), Fe(C(5)H(4)PPh(2))(2) (e)) were synthesized from [M(CO)(3)(NCEt)(3)] and the corresponding diphosphine. Reactions of 3 and 4 with sulfur dioxide initially gave complexes fac-[M(CO)(3)(P-P)(eta(2)-SO(2))] (M = Mo (5), W (6)), which slowly isomerized to mer-[M(CO)(3)(P-P)(eta(1)-SO(2))] (M = Mo (7), W (8)). The structures of 7b and 8b were determined by X-ray crystallography. Both compounds are isostructural (monoclinic, space group P2(1)/n (No. 14)) with almost identical unit cell dimensions (7b, a = 14.511(5) A, b = 12.797(2) A, c = 16.476(6) A, beta = 115.92(2); 8b, a = 14.478(8) A, b = 12.794(3) A, c = 16.442(9) A, beta = 116.01(2)) and molecular geometries. Treatment of either fac-[M(CO)(3)(P-P)(eta(2)-SO(2))] or mer-[M(CO)(3)(P-P)(eta(1)-SO(2))] with diazomethane yielded the sulfene complexes mer-[M(CO)(3)(P-P)(eta(2)-CH(2)SO(2))] (M = Mo (9), W (10)). The structure of 10a was determined crystallographically: monoclinic, space group P2(1)/n (No. 14), a = 11.719(2) A, b = 17.392(4) A, c = 13.441(3) A, beta = 95.58(2). The tungsten atom resides in the center of a distorted pentagonal bipyramid. The sulfene ligand occupies two adjacent equatorial sites with the bond distances W-C, 2.322(13) A, W-S, 2.353(3) A, and S-C, 1.721(12) A. The latter equals the S-C single bond distance in thiirane S,S-dioxide, indicating a high degree of charge density transfer into the LUMO of the sulfene ligand.     

Oxomolybdenum tetrathiolates with sterically encumbering ligands: modeling the effect of a protein matrix on electronic structure and reduction potentials

The effect of sterically encumbering ligands on the electronic structure of oxomolybdenum tetrathiolate complexes was determined using a combination of electronic absorption and magnetic circular dichroism spectroscopies, complimented by DFT bonding calculations, to understand geometric and electronic structure contributions to reduction potentials. These complexes are rudimentary models for a redox-active metalloenzyme active site in a protein matrix and allow for detailed spectroscopic probing of specific oxomolybdenum-thiolate interactions that are directly relevant to Mo-S(cysteine) bonding in pyranopterin molybdenum enzymes. Data are presented for three para-substituted oxomolybdenum tetrathiolate complexes ([PPh4][MoO(p-SPhCONHCH3)4], [PPh4][MoO(p-SPhCONHC(CH2O(CH2)2CN)3)4], and [PPh4][MoO(p-SPhCONHC(CH2O(CH2)2COOCH2CH3)3)4]). The Mo(V/IV) reduction potentials of the complexes in DMF are -1213, -1251, and -1247 mV, respectively. The remarkably similar electronic absorption and magnetic circular dichroism spectra of these complexes establish that the observed reduction potential differences are not a result of significant changes in the electronic structure of the [MoOS4]- cores as a function of the larger ligand size. We provide evidence that these reduction potential differences result from the driving force for a substantial reorganization of the O-Mo-S-C dihedral angle upon reduction, which decreases electron donation from the thiolate sulfurs to the reduced molybdenum center. The energy barrier to favorable O-Mo-S-C geometries results in a reorganizational energy increase, relative to [MoO(SPh)4](-/2-), that correlates with ligand size. The inherent flexible nature of oxomolybdenum-thiolate bonds indicate that thiolate ligand geometry, which controls Mo-S covalency, could affect the redox processes of monooxomolybdenum centers in pyranopterin molybdenum enzymes.     

Reactions of manganese and rhenium complexes with organic azides: preparation of tetraazabutadiene derivatives

Azide complexes [M(RN(3))(CO)(3)P(2)]BPh(4)[M = Mn, Re; R = C(6)H(5)CH(2), 4-CH(3)C(6)H(4)CH(2), C(6)H(5), 4-CH(3)C(6)H(4), C(5)H(9); P = PPh(OEt)(2), PPh(2)(OEt)] were prepared by allowing tricarbonyl MH(CO)(3)P(2) hydride complexes to react first with Br?nsted acid (HBF(4), CF(3)SO(3)H) and then with organic azide in the dark. In sunlight the reaction yielded tetraazabutadiene [M(eta(2)-1,4-R(2)N(4))(CO)(2)P(2)]BPh(4) complexes or, with benzyl azide, imine [M{eta(1)-NH[double bond, length as m-dash]C(H)Ar}(CO)(3)P(2)]BPh(4)(Ar = C(6)H(5), 4-CH(3)C(6)H(4)) derivatives. Tetraazabutadiene [M(eta(2)-1,4-R(2)N(4))(CO)(2)P(2)]BPh(4) complexes were also prepared by reacting dicarbonyl MH(CO)(2)P(3) species first with Br?nsted acid and then with an excess of organic azide. Complexes were characterised spectroscopically (IR, (1)H, (31)P, (13)C, (15)N NMR data) and by the X-ray crystal structure determination of complex [Re{eta(2)-1,4-(C(6)H(5)CH(2))(2)N(4)}(CO)(2){PPh(OEt)(2)}(2)]BPh(4)(). Strong evidence for coordination of the organic azide was obtained from the (15)N NMR spectra of labelled [M(C(6)H(5)CH(2)(15)NN(15)N)(CO)(3)P(2)]BPh(4) derivatives.     

Mechanism of the hydrogenation of ketones catalyzed by trans-dihydrido(diamine)ruthenium II complexes

The complexes trans-RuH(Cl)(tmen)(R-binap) (1) and (OC-6-43)-RuH(Cl)(tmen)(PPh(3))(2) (2) are prepared by the reaction of the diamine NH(2)CMe(2)CMe(2)NH(2) (tmen) with RuH(Cl)(PPh(3))(R-binap) and RuH(Cl)(PPh(3))(3), respectively. Reaction of KHB(sec)Bu(3) with 1 yields trans-Ru(H)(2)(R-binap)(tmen) (5) while reaction of KHB(sec)Bu(3) or KO(t)Bu with 2 under Ar yields the new hydridoamido complex RuH(PPh(3))(2)(NH(2)CMe(2)CMe(2)NH) (4). Complex 4 has a distorted trigonal bipyramidal geometry with the amido nitrogen in the equatorial plane. Loss of H(2) from 5 results in the related complex RuH(R-binap)(NH(2)CMe(2)CMe(2)NH) (3). Reaction of H(2) with 4 yields the trans-dihydride (OC-6-22)-Ru(H)(2)(PPh(3))(2)(tmen)(6). Calculations support the assignment of the structures. The hydrogenation of acetophenone is catalyzed by 5 or 4 in benzene or 2-propanol without the need for added base. For 5 in benzene at 293 K over the ranges of concentrations [5] = 10(-)(4) to 10(-)(3) M, [ketone] = 0.1 to 0.5 M, and of pressures of H(2) = 8 to 23 atm, the rate law is rate = k[5][H(2)] with k = 3.3 M(-1) s(1), DeltaH++ = 8.5 +/- 0.5 kcal mol(-1), DeltaS++ = -28 +/- 2 cal mol(-1) K(-1). For 4 in benzene at 293 K over the ranges of concentrations [4] = 10(-4) to 10(-3) M, [ketone] 0.1 to 0.7 M, and of pressures of H(2) = 1 to 6 atm, the preliminary rate law is rate = k[4][H(2)] with k = 1.1 x 10(2) M(-1) s(-1), DeltaH++ = 7.6 +/- 0.3 kcal mol(-1), DeltaS++ = -23 +/- 1 cal mol(-1) K(-1). Both theory and experiment suggest that the intramolecular heterolytic splitting of dihydrogen across the polar Ru=N bond of the amido complexes 3 and 4 is the turn-over limiting step. A transition state structure and reaction energy profile is calculated. The transfer of H(delta+)/H(delta-) to the ketone from the RuH and NH groups of 5 in a Noyori metal-ligand bifunctional mechanism is a fast process and it sets the chirality as (R)-1-phenylethanol (62-68% ee) in the hydrogenation of acetophenone. The rate of hydrogenation of acetophenone catalyzed by 5 is slower and the ee of the product is low (14% S) when 2-propanol is used as the solvent, but both the rate and ee (up to 55% R) increase when excess KO(t)Bu is added. The formation of ruthenium alkoxide complexes in 2-propanol might explain these observations. Alkoxide complexes [RuP(2)]H(OR)(tmen), [RuP(2)] = Ru(R-binap) or Ru(PPh(3))(2), R= (i) Pr, CHPhMe, (t)Bu, are observed by reacting the alcohols (i)PrOH, phenylethanol, and (t)BuOH with the dihydrides 5 and 6, respectively, under Ar. In the absence of H(2), the amido complexes 3 and 4 react with acetophenone to give the ketone adducts [RuP(2)]H(O=CPhMe)(NH(2)CMe(2)CMe(2)NH) in equilibrium with the enolate complexes trans- [RuP(2)](H)(OCPh=CH(2))(tmen) and eventually the decomposition products [RuP(2)]H(eta(5)-CH(2)CPhCHCPhO), with the binap complex characterized crystallographically. In general, proton transfer from the weakly acidic molecules dihydrogen, alcohol, or acetophenone to the amido nitrogen of complexes 3 and 4 is favored in two ways when the molecule coordinates to ruthenium: (1) an increase in acidity of the molecule by the Lewis acidic metal and (2) an increase in the basicity of the amido nitrogen caused by its pyramidalization. The formato complexes trans-[RuP(2)]H(OCHO)(tmen) were prepared by reacting the respective complex 4 or 5 with formic acid. The crystal structure of RuH(OCHO)(PPh(3))(2)(tmen) displays similar features to the calculated transition state for H(delta+)/H(delta-) transfer to the ketone in the catalytic cycle.     

Palladium(II) and platinum(II) organometallic complexes with the model nucleobase anions of thymine, uracil, and cytosine: antitumor activity and interactions with DNA of the platinum compounds

Pd(II) and Pt(II) complexes with the anions of the model nucleobases 1-methylthymine (1-MethyH), 1-methyluracil (1-MeuraH), and 1-methylcytosine (1-MecytH) of the types [Pd(dmba)(mu-L)]2 [dmba = N,C-chelating 2-((dimethylamino)methyl)phenyl; L = 1-Methy, 1-Meura or 1-Mecyt] and [M(dmba)(L)(L')] [L = 1-Methy or 1-Meura; L' = PPh(3) (M = Pd or Pt), DMSO (M = Pt)] have been obtained. Palladium complexes of the types [Pd(C6F5)(N-N)(L)] [L = 1-Methy or 1-Meura; N-N = N,N,N',N'-tetramethylethylenediamine (tmeda), 2,2'-bipyridine (bpy), or 4,4'-dimethyl-2,2'-bipyridine (Me2bpy)] and [NBu4][Pd(C6F5)(1-Methy)2(H2O)] have also been prepared. The crystal structures of [Pd(dmba)(mu-1-Methy)]2, [Pd(dmba)(mu-1-Mecyt)]2.2CHCl3, [Pd(dmba)(1-Methy)(PPh3)].3CHCl3, [Pt(dmba)(1-Methy)(PPh3)], [Pd(tmeda)(C6F5)(1-Methy)], and [NBu4][Pd(C6F5)(1-Methy)2(H2O)].H2O have been established by X-ray diffraction. The DNA adduct formation of the new platinum complexes synthesized was followed by circular dichroism and electrophoretic mobility. Atomic force microscopy images of the modifications caused by the platinum complexes on plasmid DNA pBR322 were also obtained. Values of IC50 were also calculated for the new platinum complexes against the tumor cell line HL-60. All the new platinum complexes were more active than cisplatin (up to 20-fold in some cases).     

Preparations, structures, and electrochemical studies of aryldiazene complexes of rhenium: syntheses of the first heterobinuclear and heterotrinuclear derivatives with bis(diazene) or bis(diazenido) bridging ligands

The mono- and binuclear aryldiazene complexes [Re(C6H5N=NH)(CO)5-nPn]BY4 (1-5) and [(Re(CO)5-nPn)2-(mu-HN=NAr-ArN=NH)](BY4)2 (6-12) [P = P(OEt)3, PPh(OEt)2, PPh2OEt; n = 1-4; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-(2-CH3)C6H3-C6H3(2-CH3), 4,4'-C6H4-CH2-C6H4; Y = F, Ph) were prepared by reacting the hydride species ReH(CO)5-nPn with the appropriate mono- and bis(aryldiazonium) cations. These compounds, as well as other prepared compounds, were characterized spectroscopically (IR; 1H, 31P, 13C, and 15N NMR data), and 1a was also characterized by an X-ray crystal structure determination. [Re(C6H5N=NH)(CO)(P(OEt)3)4]BPh4 (1a) crystallizes in space group P1 with a = 15.380(5) A, b = 13.037(5) A, c = 16.649(5) A, alpha = 90.33(5) degrees, beta = 91.2(1) degrees, gamma = 89.71(9) degrees, and Z = 2. The "diazene-diazonium" complexes [M(CO)3P2(HN=NAr-ArN identical to N)](BF4)2 (13-15, 17) [M = Re, Mn; P = PPh2OEt, PPh2OMe, PPh3; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4] and [Re(CO)4(PPh2OEt)(4,4'-HN=NC6H4-C6H4N identical to N)](BF4)2 (16b) were synthesized by allowing the hydrides MH(CO)3P2 or ReH(CO)4P to react with equimolar amounts of bis(aryldiazonium) cations under appropriate conditions. Reactions of diazene-diazonium complexes 13-17 with the metal hydrides M2H2P'4 and M2'H(CO)5-nP"n afforded the heterobinuclear bis(aryldiazene) derivatives [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2HP'4](BPh4)2 (ReFe, ReRu, ReOs, MnRu, MnOs) and [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2'(CO)5-nP"n](BPh4)2 (ReMn, MnRe) [M1 = Re, Mn; M2 = Fe, Ru, Os; M2' = Mn, Re; P = PPh2OEt, PPh2OMe; P',P" = P(OEt)3, PPh(OEt)2; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4; n = 1, 2]. The heterotrinuclear complexes [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)M(P(OEt)3)4(mu-4,4'-HN=NC6H4- C6H4N=NH)Mn(CO)3(PPh2OEt)2](BPh4)4 (M = Ru, Os) (ReRuMn, ReOsMn) were obtained by reacting the heterobinuclear complexes ReRu and ReOs with the appropriate diazene-diazonium cations. The heterobinuclear complex with a bis(aryldiazenido) bridging ligand [Mn(CO)2(PPh2OEt)2(mu-4,4'-N2C6H4-C6H4N2)Fe(P(OEt)3)4]BPh4 (MnFe) was prepared by deprotonating the bis(aryldiazene) compound [Mn(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)Fe(4- CH3C6H4CN)(P(OEt)3)4](BPh4)3. Finally, the binuclear compound [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N2)Fe(CO)2(P(OPh)3)2](BPh4)2 (ReFe) containing a diazene-diazenido bridging ligand was prepared by reacting [Re(CO)3(PPh2OEt)2(4,4'-HN=NC6H4-C6H4N identical to N)]+ with the FeH2(CO)2(P(OPh)3)2 hydride derivative. The electrochemical reduction of mono- and binuclear aryldiazene complexes of both rhenium (1-12) and the manganese, as well as heterobinuclear ReRu and MnRu complexes, was studied by means of cyclic voltammetry and digital simulation techniques. The electrochemical oxidation of the mono- and binuclear aryldiazenido compounds Mn(C6H5N2)(CO)2P2 and (Mn(CO)2P2)2(mu-4,4'-N2C6H4-C6H4N2) (P = PPh2OEt) was also examined. Electrochemical data show that, for binuclear compounds, the diazene bridging unit allows delocalization of electrons between the two different redox centers of the same molecule, whereas the two metal centers behave independently in the presence of the diazenido bridging unit.     

Syntheses, structures, and stabilities of [PPh(4)][WS(3)(SR)](R=(i)Bu,(i)Pr,(i)Bu, benzyl, allyl) and [PPh(4)][MoS(3)(S(t)Bu)

Intermediates in the condensation process of [MS(4)](2)(-) (M = Mo, W) to polythiometalates, in the presence of alkyl halides, had not been reported prior to our communication of [PPh(4)][WS(3)(SEt)] (Boorman, P. M.; Wang, M.; Parvez, M. J. Chem. Soc., Chem. Commun. 1995, 999-1000). We now report the isolation of a range of related compounds, with 1 degrees, 2 degrees, and 3 degrees alkyl thiolate ligands, including one Mo example. [PPh(4)][WS(3)(SR)] (R = (i)Bu (1), (i)Pr (2), (t)Bu (3), benzyl (5), allyl (6)) and [PPh(4)][MoS(3)(S(t)Bu)] (4) have been isolated in fair to good yields from the reaction of [PPh(4)](2)[MS(4)] with the appropriate alkyl halide in acetonitrile and subjected to analysis by X-ray crystallography. Crystal data are as follows: for 1, triclinic space group P1 (No. 2), a = 11.0377(6) A, b = 11.1307(5) A, c = 13.6286(7) A, alpha = 82.941(1) degrees, beta = 84.877(1) degrees, gamma = 60.826(1) degrees, Z = 2; for 2, monoclinic space group P2(1)/c (No. 14), a = 9.499(6) A, b = 15.913(5) A, c = 18.582(6) A, beta = 99.29(4) degrees, Z = 4; for 3, monoclinic space group P2(1)/n (No. 14), a = 10.667(2) A, b = 17.578(2) A, c = 16.117(3) A, beta = 101.67(1) degrees, Z = 4; for 4, monoclinic space group P2(1)/n (No. 14), a = 10.558(3) A, b = 17.477(3) A, c = 15.954(3) A, beta = 101.18(2) degrees, Z = 4; for 5, monoclinic space group P2(1)/n (No. 14), a = 16.2111(9) A, b = 11.0080(6) A, c = 18.1339(10) A, beta = 111.722(1) degrees, Z = 4; for 6, triclinic space group P1 (No. 2), a = 9.4716(9) A, b = 10.4336(10) A, c = 14.4186(14) A, alpha = 100.183(2) degrees, beta = 90.457(2) degrees, gamma = 91.747(2) degrees, Z = 2. Structures 3 and 4 are isomorphous, and 1 exhibits disorder about the tertiary carbon. 6 has been shown to exhibit fluxionality in solution by variable-temperature (1)H NMR studies, and an allyl migration mechanism is implicated in this process. The kinetics for the reaction of [WS(4)](2)(-) and EtBr were measured and suggest an associative nucleophilic substitution (S(N)2) mechanism. The decomposition of the [WS(3)(SEt)](-) ion is shown to be second order with respect to this ion, suggesting the formation of a transient binuclear intermediate. M-S bond cleavage is the predominant step in decomposition of 1-6 to yield alkyl sulfides, alkyl thiols, and polythiometalates such as [PPh(4)](2)[M(3)S(9)]. In contrast, reactions of [PPh(4)](2)[WO(x)()S(4)(-)(x)()] (x = 1, 2) with (t)BuBr result in the additional decomposition product of isobutene, presumably by C-S bond cleavage and beta-hydrogen transfer. Interestingly, the reaction of [PPh(4)](2)[WOS(3)] with BzCl yields 5 as the only isolable W thiolate species.     

Stable diplatinum complexes with functional thiolato bridges from dialkylation of [Pt2(mu-S)2(P-P)2] [P-P=2 x PPh3, Ph2P(CH2)3PPh2

The normally robust monoalkylated complexes [Pt(2)(mu-S)(mu-SR)(PPh(3))(4)](+) can be activated towards further alkylation. Dialkylated complexes [Pt(2)(mu-SR)(2)(P-P)(2)](2+) (P-P=2 x PPh(3), Ph(2)P(CH(2))(3)PPh(2)) can be stabilized and isolated by the use of electron-rich and aromatic halogenated substituents R [e.g. 3-(2-bromoethyl)indole and 2-bromo-4'-phenylacetophenone] and 1,3-bis(diphenylphosphino)propane [Ph(2)P(CH(2))(3)PPh(2) or dppp] which enhances the nucleophilicity of the {Pt(2)(mu-S)(2)} core. This strategy led to the activation of [Pt(2)(mu-S)(mu-SR)(PPh(3))(4)](+) towards R-X as well as isolation and crystallographic elucidation of [Pt(2)(mu-SC(10)H(10)N)(2)(PPh(3))(4)](PF(6))(2) (2a), [Pt(2)(mu-SCH(2)C(O)C(6)H(4)C(6)H(5))(2)(PPh(3))(4)](PF(6))(2) (2b), and a range of functionalized-thiolato bridged complexes such as [Pt(2)(mu-SR)(2)(dppp)(2)](PF(6))(2) [R= -CH(2)C(6)H(5) (8a), -CH(2)CHCH(2) (8b) and -CH(2)CN (8c)]. The stepwise alkylation process is conveniently monitored by Electrospray Ionisation Mass Spectrometry, allowing for a direct qualitative comparison of the nucleophilicity of [Pt(2)(mu-S)(2)(P-P)(2)], thereby guiding the bench-top synthesis of some products observed spectroscopically.     

An eight-coordinate vanadium thiolate complex with charge delocalization between V(V)-thiolate and V(IV)-thiyl radical forms

A six-coordinate oxovanadium(V) thiolate complex and an eight-coordinate non-oxovanadium thiolate complex, [PPh(4)][VO(PS3')(OCH(3))] (1) and [NEt(4)][V(PS3')(2)] (2) (PS3' = P(C(6)H(3)-3-Me(3)Si-2-S)(3)(3-)), respectively, have been isolated and structurally characterized. The former belongs to a limited collection of oxovanadium(V) thiolate complexes. The latter has an unusual coordination number of eight. More importantly, its consensus electronic structure derived from its spectroscopic data should be considered as the resonance forms of V(V)-thiolate and V(IV)-thiyl radical species. This implies that V(IV)-thiyl radical can maintain a stable presence in biological systems.     

Synthesis and dehydrocoupling reactivity of iron and ruthenium phosphine-borane complexes

The Fe and Ru phosphine-borane complexes CpM(CO)2PPh2 x BH3 (1, M = Fe, 4, M = Ru) were synthesized utilizing the reaction of the phosphine-borane anion Li[PPh2 x BH3] with the iodo complexes CpM(CO)2I. The Fe complex 1 reacted with PMe3 to yield CpFe(CO)(PMe3)(PPh2 x BH3) (2) and CpFe(PMe3)2(PPh2 x BH3) (3) whereas the Ru species 4 gave only CpRu(CO)(PMe3)(PPh2 x BH3) (5). The complexes 1-5 were characterized by 1H, 11B, 13C and 31P NMR spectroscopy, MS, IR and X-ray crystallography for 1 to 4, and EA for 1, 2 and 4. The reactivity of 1 and 4 towards PPh2H x BH3 was explored. Although no stoichiometric reactions were detected under mild conditions, both 1 and 4 were found to function as dehydrocoupling catalysts to afford Ph2PH x BH2 x PPh2 x BH3 in the melt at elevated temperature (120 degrees C). The carbonyl Fe2(CO)9 also functioned as a dehydrocoupling catalyst under similar conditions. Complex 1 and Fe2(CO)9 represent the first reported active Fe complexes for the catalytic dehydrocoupling of phosphine-borane adducts.     

Cubane-type heterometallic sulfido clusters: incorporation of two metal fragments into a dinuclear ReS(mu-S)2ReS core affording bimetallic M2Re2(mu 3-S)4 clusters (M = Ru,Pt, Cu) or trimetallic MM'Re2(mu 3-S)4 clusters via incomplete cubane-type MRe2(mu 3-S)(mu 2-S)3 intermediates (M = Ru,Rh, Ir; M' = Mo,W, Pd,Ru, Rh)

Reactions of a dirhenium tetra(sulfido) complex [PPh(4)](2)[ReS(L)(mu-S)(2)ReS(L)] (L = S(2)C(2)(SiMe(3))(2)) with a series of group 8-11 metal complexes in MeCN at room temperature afforded either the cubane-type clusters [M(2)(ReL)(2)(mu(3)-S)(4)] (M = CpRu (2), PtMe(3), Cu(PPh(3)) (4); Cp = eta(5)-C(5)Me(5)) or the incomplete cubane-type clusters [M(ReL)(2)(mu(3)-S)(mu(2)-S)(3)] (M = (eta(6)-C(6)HMe(5))Ru (5), CpRh (6), CpIr (7)), depending on the nature of the metal complexes added. It has also been disclosed that the latter incomplete cubane-type clusters can serve as the good precursors to the trimetallic cubane-type clusters still poorly precedented. Thus, treatment of 5-7 with a range of metal complexes in THF at room temperature resulted in the formation of novel trimetallic cubane-type clusters, including the neutral clusters [[(eta(6)-C(6)HMe(5))Ru][W(CO)(3)](ReL)(2)(mu(3)-S)(4)], [(CpM)[W(CO)(3)](ReL)(2)(mu(3)-S)(4)] (M = Rh, Ir), [(Cp*Ir)[Mo(CO)(3)](ReL)(2)(mu(3)-S)(4)], [[(eta(6)-C(6)HMe(5))Ru][Pd(PPh(3))](ReL)(2)(mu(3)-S)(4)], and [(Cp*Ir)[Pd(PPh(3))](ReL)(2)(mu(3)-S)(4)] (13) along with the cationic clusters [(Cp*Ir)(CpRu)(ReL)(2)(mu(3)-S)(4)][PF(6)] (14) and [(Cp*Ir)[Rh(cod)](ReL)(2)(mu(3)-S)(4)][PF(6)] (cod = 1,5-cyclooctadiene). The X-ray analyses have been carried out for 2, 4, 7, 13, and the SbF(6) analogue of 14 (14') to confirm their bimetallic cubane-type, bimetallic incomplete cubane-type, or trimetallic cubane-type structures. Fluxional behavior of the incomplete cubane-type and trimetallic cubane-type clusters in solutions has been demonstrated by the variable-temperature (1)H NMR studies, which is ascribable to both the metal-metal bond migration in the cluster cores and the pseudorotation of the dithiolene ligand bonded to the square pyramidal Re centers, where the temperatures at which these processes proceed have been found to depend upon the nature of the metal centers included in the cluster cores.     

Oxygen Atom Transfer, Coupled Electron-Proton Transfer, and Correlated Electron-Nucleophile Transfer Reactions of Oxomolybdenum(IV) and Dioxomolybdenum(VI) Complexes

The oxo-Mo(IV) complexes LMoO(S(2)PR(2)-S,S') [L = hydrotris(3,5-dimethylpyrazol-1-yl)borate; R = Me, Et, Pr(i)(), Ph] were prepared by reacting MoO(S(2)PR(2))(2) and KL in refluxing toluene. The dioxo-Mo(VI) complexes cis-LMoO(2)(S(2)PR(2)-S) (R = Pr(i)(), Ph) were prepared by oxidation of the oxo-Mo(IV) complexes or by reaction of LMoO(2)Cl with NaS(2)PR(2). Oxygen atom transfers from Me(2)SO to LMoO(S(2)PR(2)) were first-order with respect to Me(2)SO and complex; the overall second-order rate constants at 40 degrees C range from 9.0(1) x 10(-)(5) M(-)(1).s(-)(1) for LMoO(S(2)PMe(2)) to 2.08(5) x 10(-)(4) M(-)(1).s(-)(1) for LMoO(S(2)PPr(2)); activation parameters were in the ranges DeltaH() = 63(1) to 73(1) kJ.mol(-)(1), DeltaS() = -88(1) to -111(1) J.K(-)(1).mol(-)(1), and DeltaG() = 100(2) kJ.mol(-)(1) for LMoO(S(2)PMe(2)) to 98(2) kJ.mol(-)(1) for LMoO(S(2)PPr(2)). Oxygen atom transfer from pyridine N-oxide to LMoO(S(2)PPr(2)) was also second-order with a rate constant of 1.54(5) x 10(-)(3) M(-)(1).s(-)(1) at 40 degrees C, DeltaH() = 62(1) kJ.mol(-)(1), DeltaS() = -90(1) J.K(-)(1).mol(-)(1), and DeltaG() = 90(1) kJ.mol(-)(1). The second-order rate laws and large negative entropies of activation are consistent with associative mechanisms for the above reactions. Oxygen atom transfer from LMoO(2)(S(2)PPr(2)) to PPh(3) was first-order with respect to reactants, with an overall second-order rate constant of 2.5(3) x 10(-)(4) M(-)(1).s(-)(1) at 30 degrees C. In toluene at 40 degrees C, all the above complexes catalyzed the oxidation of PPh(3) by Me(2)SO, with turnover rates of ca. 0.9 mol of PPh(3)/(mol of catalyst/h). Reduction of LMoO(2)(S(2)PR(2)) by SH(-) led to the generation of the dioxo-Mo(V) anions [LMoO(2)(S(2)PR(2)-S)](-), which were slowly converted to the analogous oxothio-Mo(V) complexes [LMoOS(S(2)PR(2)-S)](-). Dioxygen reacted with [LMoOS(S(2)PPr(2))](-) to produce the oxothio-Mo(VI) complex LMoOS(S(2)PPr(2)-S). The (hydroxo)oxo-Mo(V) complexes LMoO(OH)(S(2)PR(2)-S) were formed upon reduction of LMoO(2)(S(2)PR(2)) with PPh(3) in wet (3-5 M H(2)O) tetrahydrofuran or upon ferrocenium oxidation of LMoO(S(2)PR(2)) in wet tetrahydrofuran. In dry solvents, LMoO(S(2)PR(2)) were oxidized to the corresponding cations, [LMoO(S(2)PR(2)-S,S')](+), which reacted with water to form LMoO(OH)(S(2)PR(2)). The Mo(V) complexes have been characterized by EPR spectroscopy.     

Unprecedented luminescent heteropolynuclear aggregates with gold thiolates as building blocks

The reaction of [AuCl(P-N)], in which P-N represents a heterofunctional phosphine ligand, with pentafluorothiophenol, HSC(6)F(5), gives the thiolate gold derivatives [Au(SC(6)F(5))(P-N)] (P-N = PPh(2)py (1), PPh(2)CH(2)CH(2)py (2), or PPhpy(2) (3)). Complex [Au(SC(6)F(5))(PPh(2)py)] (1) reacts with [Au(OTf)(PPh(2)py)] in a 1:1 or 1:2 molar ratio to afford the di- or trinuclear species [Au(2)(μ-SC(6)F(5))(PPh(2)py)(2)]OTf (4) and [Au(3)(μ(3)-SC(6)F(5))(PPh(2)py)(3)](OTf)(2) (5), with the thiolate acting as a doubly or triply bridging ligand. The reactivity of the mononuclear compounds [Au(SC(6)F(5))(P-N)] toward silver or copper salts in different ratios has been investigated. Thus, the treatment of [Au(SC(6)F(5))(P-N)] with Ag(OTf) or [Cu(NCMe)(4)]PF(6) in a 1:1 molar ratio gives complexes of stoichiometry [AuAg(OTf)(μ-SC(6)F(5))(P-N)] (P-N = PPh(2)py (6), PPh(2)CH(2)CH(2)py (7), or PPhpy(2) (8)) or [AuCu(μ-SC(6)F(5))(P-N)(NCMe)]PF(6) (P-N = PPh(2)py (9), PPh(2)CH(2)CH(2)py (10), or PPhpy(2) (11)). These complexes crystallize as dimers and display different coordination modes of the silver or copper center, depending on the present functionalized phosphine ligand. The treatment of [Au(SC(6)F(5))(PPh(2)py)] with silver and copper compounds in other molar ratios has been carried out. In a 2:1 ratio, the complexes [Au(2)M(μ-SC(6)F(5))(2)(μ-PPh(2)py)(2)]X (M = Ag, X = OTf (12); M = Cu, X = PF(6) (13)) are obtained. The same reaction in a 4:3 molar ratio affords the species [Au(4)M(2)(μ-SC(6)F(5))(3)(μ-PPh(2)py)(4)]X(3) (M = Ag, X = OTf (14); M = Cu, X = PF(6) (15)). The crystal structures of some of these complexes reveal different interactions among the metallic d(10) centers. The complexes display dual emission. The band at higher energy has been attributed to intraligand (IL) transitions, and the one at lower energy has been assigned to a ligand to metal (LM) charge transfer process. The latter emission is modulated by the heterometal (silver or copper).     

Theoretical studies on the magnetic switching controlled by stacking patterns of bis(maleonitriledithiolato) nickelate(III) dimers

Magnetic switchable maleonitriledithiolate (mnt) complexes were studied by density functional theory. The calculations were performed for anion dimers of [RBzPyR'][Ni(mnt)(2)] (RBzPyR' = derivatives of benzylpyridinium) to elucidate magnetostructural correlations and the nature of the weak intermolecular chemical bonding. The calculated results showed that the spin delocalization, favored by the eclipsed stacking and the shorter interlayer distance, was responsible for the diamagnetic character of [1-benzyl-4-aminopyridinium][Ni(mnt)(2)] at low temperature. The weak antiferromagnetic and ferromagnetic interactions were also reproduced for [1-benzyl-4-aminopyridinium][Ni(mnt)(2)] and [1-(4'-fluorobenzyl)pyridinium][Ni(mnt)(2)] at high temperature, respectively. The natural bond orbital analysis suggested that the cooperative effect of the weak intermolecular bondings may be the intrinsic driving force resulting in the switchable property, which is essentially similar to those in organic radicals exhibiting magnetic bistability. Further investigations with varying interlayer distance d, the extent of slippage (slipping distance r and deviation angle alpha), and rotational angle theta suggested that the extent of slippage played an important role in magnetic interactions. Therefore, the abrupt modulation of the extent of slippage in the [Ni(mnt)(2)](-) complexes by external perturbations provided new possibilities for the design of molecular magnetic switching devices.