Substrate-independent approach for polymer brush growth by surface atom transfer radical polymerization

A simple method for growing polymer brushes by atom transfer radical polymerization (ATRP) off solid surfaces has been devised. This entails pulsed plasmachemical deposition of a halogen-containing initiator layer, followed by either organic or aqueous phase controlled surface polymerization. The wide-scale applicability of this approach is exemplified by functionalizing flat substrates, microbeads, and nonwoven textiles.     

Selective modification of two-dimensional MoS2 nanosheets by polymer grafting

We reported on the direct creation of polymer brushes on two-dimensional molybdenum disulfide via the formation of C-S bond by UV-induced photopolymerization. The functionalization can be manipulated in forming polymer grafts on one side or both sides of the nanosheets.     

Solution-processable transparent polyimides with low coefficients of thermal expansion and self-orientation behavior induced by solution casting

A fluorinated tetracarboxylic dianhydride (amide-type TA-TFMB) was prepared from trimellitic anhydride chloride and 2,2′-bis(trifluoromethyl)benzidine (TFMB). A chemically imidized polyimide (PI) derived from TA-TFMB and TFMB was rather soluble in various solvents. Solution casting of this PI (TA-TFMB/TFMB) led to a flexible, non-turbid, and seemingly almost colorless PI film with a high T_g of 328 °C and a considerably low coefficient of thermal expansion (CTE) of 9.9 ppm K⁻¹ which results from significant in-plane chain orientation induced during solution casting. The self-orientation mechanism is discussed. The properties of TA-TFMB/TFMB were compared with those of some relevant systems. The results suggest that an electron-withdrawing effect of the 2,2′-CF₃ substituents of TA-TFMB and a twisted conformation of the central biphenyl moiety greatly contribute to the suppressed coloration of the TA-TFMB/TFMB film. The use of a TA-TFMB counterpart (ester-type TA-TFBP) was effective for further enhancing the transparency owing to reduced charge-transfer interaction. However, the thermal properties of TA-TFBP/TFMB were not always satisfactory. Copolymerization using 2,3,6,7-naphthalenetetracarboxylic dianhydride led to a PI film with an increased T_g of 277 °C and a very low CTE of 12.6 ppm K⁻¹ without significant decreases in the transparency and the solubility. Thus, this work proposes promising candidates as novel heat-resistant plastic substrate materials in display devices.     

Cellulose nanosheets induced by mechanical impacts under hydrophobic environment

The nanoscale structural changes of crystalline cellulose by mechanical milling was studied by high-resolution microscopy (AFM, SEM, TEM). We examined influence of environment [dry, water, silicone oil (PDMS)] on cellulose milling, finding their characteristic effects on microscopic morphology of the products. Dry milling of cellulose gave aggregated globular particles with fast decrystallization. Milling with water or PDMS caused partial dispersion of nanofibers. Milling with PDMS formed micro-platelets <1 µm thick with slight decrystallization. Remarkably, nanoscale particles isolated from PDMS-milled cellulose by sonication in ethanol contained cellulose nanosheets, typically 0.1–10 µm wide and 4.2 nm thick, apparently formed by monolayer association of elementary fibrils. TEM and electron diffraction revealed crystalline nature of nanosheets, with specific orientation of (110) plane or (200) plane perpendicular to the sheet plane. A possible mechanism of the nanosheets formation is proposed, in which the elementary fibrils are aligned parallel by mechanical impacts.     

A viscosity self-oscillation of polymer solution induced by the Belousov-Zhabotinsky reaction under acid-free condition

We succeeded in measuring a viscosity self-oscillation induced by the Belousov-Zhabotinsky (BZ) reaction for a polymer solution on the constant temperature condition under acid-free condition. The polymer chain is consisted of N-isopropylacrylamide, ruthenium complex as a catalyst of the BZ reaction, and an acrylamide-2-methylpropanesulfonic acid (AMPS) as a pH and the solubility control site. The viscosity self-oscillation for the AMPS-containing polymer solution was attributed to the difference between viscosities for the polymer solution in the reduced and oxidized states. The effects of the polymer concentration and the temperature of the polymer solution on the viscosity self-oscillation were investigated. As a result, the viscosity self-oscillating behavior significantly depended on the polymer concentration and the temperature of the polymer solution. The period of the viscosity self-oscillation decreased with increasing temperature in accordance with the Arrenius equation.     

Micropatterned polymer surfaces induced by nonsolvent

In this work, we present a facile method for fabricating polymer thin films with micropatterned surfaces by evaporating polymer solution containing a small amount of nonsolvent of polymer in air. Poly(methyl methacrylate) (PMMA) and polystyrene (PS) films with densely packed micropores on the surfaces were fabricated. This method was also used to prepare three-dimensional PMMA films with micropatterned surfaces. The effects of nonsolvent content; evaporation temperature; and interactions between the polymer, solvent, and nonsolvent on the specific patterns were investigated, and the formation mechanism of the pores is discussed. This simple route can potentially be used, for example, in the large-scale production of patterned surfaces, three-dimensional painting, and hydrophobicity-enhancing coatings.     

Protein conformation in solution by three-dimensional fluorescence spectrometry

The conformations of bovine serum albumin (USA) and egg albumin (EA) in solution and their conformation changes under different conditions were studied by using three-dimensional fluorescence spectrometry (TDFS) such as three-dimensional fluorescence (TDF) spectra and three-dimensional fluorescence polarization (TDFP) spectra with tryptophan residues in protein molecules as an intrinsic fluorescent probe. The results show that the microenvironment of tryptophan residues of protein molecules in various solutions can be directly indicated and TDFS is an effective tool for studying protein conformation in solution. Meantime, some valuable results were obtained.     

Molecular optical gating devices based on polymer nanosheets assemblies

We describe here a polymer nanosheet assembly that serves as a molecular photoswitching and optical exclusive OR (EXOR) logic gate. Separate polymer nanosheets (monolayers) containing phenanthrene, anthracene, and dinitrobenzene chromophore were prepared by the Langmuir-Blodgett technique (LB films). A bilayer-couple, consisting of phenanthrene (sensitizer) monolayer and dinitrobenzene (acceptor) monolayer, and the other couple, of anthracene monolayer and dinitrobenzene monolayer, were confirmed to function as a photodiode showing current rectification on light irradiation. The two photodiodes are connected as each photocurrent direction becomes opposite. In the polymer photodiode array (LB films), anodic photocurrent was observed when the anthracene was selectively excited. On the other hand, cathodic photocurrent was observed by selective excitation of the phenanthrene. Moreover, the output photocurrent displayed a very small value when the phenanthrene and anthracene were excited simultaneously. The performance is discussed for this gate's application to an optical EXOR logic gate.     

Adsorption of uranium from aqueous solution by graphene oxide nanosheets supported on sepiolite

Adsorptive behavior of uranium from aqueous solution on graphene oxide supported on sepiolite composites (GO@sepiolite composites) as a function of pH, ionic strength, temperature and initial uranium concentration was carried out by the batch techniques. GO@sepiolite composites was synthesized and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and potentiometric acid–base titration. According to XRD patterns and SEM images, the graphene oxide nanosheets were grafted on sepiolite surface successfully. The macroscopic results showed that the adsorption of uranium on GO@sepiolite composites was significantly depended on pH, whereas no effect of ionic strength on uranium adsorption at high pH and high ionic strength conditions was observed. The uptake equilibrium is best described by Langmuir adsorption isotherm, and the maximum adsorption capacity (Q_e) of GO@sepiolite composites at pH 5.0 and T = 298 K were calculated to be 161.29 mg/g. Thermodynamic results indicated that the adsorption of uranium on GO@sepiolite composites is the spontaneous and exothermic process.     

Synthesis of the rare earth compound nanosheets induced by lamellar liquid crystal

Synthesis of rare earth compound nanosheets with uniform thickness is of potential interest to the luminescent materials. Herein, whole series of rare earth hydrates and oxides nanosheets have been synthesized by using lamellar liquid crystal as a template, except Ce and Pm. Polarizing microscope images and transmission electron microscopy images show that the lamellar liquid crystal can prevent the rare earth hydrate nanosheets from curving to nanotubes in the processes of synthesis. The synthesized nanosheets have a uniform thickness of 10–15 nm and can retain morphology after being calcined at 650 °C. After facile chemical treatment, the functionalized rare earth compounds were obtained, which have unique luminescent property.     

Ultrathin two-dimensional porphyrinic metal-organic framework nanosheets induced by the axial aryl substituent

Ultrathin two-dimensional metal-organic framework nanosheets have emerged as a promising kind of heterogeneous catalysts. Herein, we report a new kind of 2D porphyrinic metal-organic framework nanosheets of Rh2-PCN-222, which was prepared from the self-assembly of the metalloporphyrin ligand Rh(TCPP)(DCB) (TCPP = 5,10,15,20-tetrakis(4-methoxycarbonylphenyl)porphyrin; DCB = 3,4-dichlorobenzene) and ZrCl₄ in the presence of two kinds of monocarboxylic acids as the modulating reagent. The thickness of Rh2-PCN-222 nanosheets was characterized by atomic force microscopy (AFM) and determined to be 5.4-9.6 nm. It was found that the axial aryl dichlorophenyl substituent, which controlled the anisotropic growth of MOFs, was essential for the formation of nanosheets. Catalytic results showed that Rh2-PCN-222 nanosheets were efficient for CO₂ transformation.     

Nanocomposites induced by two-dimensional titanium carbide nanosheets for highly efficient energy storage

Surface group-rich titanium carbide nanosheets (TCNSs) were successfully fabricated by simply etching Ti₃AlC₂ powders and used as dielectric fillers to promote the dielectric and energy storage performances of poly (vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-based composites. The PVDF-HFP/TCNS composites realize a high dielectric constant and low dielectric loss of 16.3 and 0.034 at 10² Hz, respectively. Importantly, a high energy storage density (U_e) of 0.367 J cm⁻³ at 900 kV cm⁻¹ and a high energy storage efficiency (η ≥ 78.9%) at a TCNS content of only 0.5 wt% are obtained, which indicates that incorporating TCNS is an efficient route in enhancing U_e while maintaining a high level η of the PVDF-HFP-based composites. According to detailed characterization results, a mechanism related to the reduction of lamellar crystals in the PVDF-HFP matrix is suggested. The above mechanism restricts the movement of polymer chains near the filler-matrix interface and is proposed to be responsible for the outstanding dielectric and energy storage performances. Consequently, this work provides a simple and effective method for fabricating highly efficient energy storage nanocomposites.     

Two-dimensional lanthanide coordination polymer nanosheets for detection of FOX-7

Despite the recent surge of interest in two-dimensional (2D) inorganic nanosheets derived from photoactive coordination polymers of lanthanide ions having interesting optical properties, research in this area is still in its infancy. Luminescent lanthanide ions, Eu(iii) or/and Tb(iii), as well as a bis-terpyridine ligand (L), were used in this study as the building blocks for the synthesis of the archetypical layered structure of coordination polymers (CPs) (L·Eu/L·Tb). 2D-nanosheets were obtained through exfoliation of the layered precursor of CPs in a suitable solvent system following a sonication-assisted strategy. These nanosheets exhibit lateral sizes on the micrometer scale (0.3–1 μm) and an ultrathin thickness of 2–6.5 nm. 1,1-Diamino-2,2-dinitroethene or FOX-7 is an insensitive high explosive; in a binder mixture, it exhibits a slightly superior detonation velocity of 8870 m s⁻¹ in comparison to RDX. The insensitive nature of FOX-7 makes it a key component for the development of low vulnerable high explosive compositions for further application in weaponry. The growing demand for FOX-7, for use as a suitable replacement of conventional explosives, is of serious concern to human security. Achieving rapid and efficient detection of this unexplored explosive is a challenging task. In the present study, the developed luminescent nanosheets were used for the first time for micromolar level detection of FOX-7 both in solution and in the solid state. A visually distinct color change of the nanosheets from red (L·Eu) and green (L·Tb) to colorless was witnessed upon UV light irradiation during the detection process. Notably, the solid-state detection technique could be exploited for developing a commercial spray kit for quick onsite screening of this important explosive.

A new class of luminescent lanthanide 2D nanosheets for detection of FOX-7.     

A millimeter-sized negatively charged polymer embedded with molybdenum disulfide nanosheets for efficient removal of Pb(II) from aqueous solution

Molybdenum disulfide (MoS₂) has excellent trapping ability for lead ions whereas its micro-/nanoscale size has greatly impeded its practical applications in the flow-through systems. Herein, a millimeter-sized nanocomposite MoS2?001 was synthesized for Pb²⁺ removal by loading MoS₂ nanosheets into a polystyrene cation exchanger D-001 by a facile hydrothermal method. The proposed structure and adsorption mechanism of MoS₂?001 was confirmed by the scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analysis. The nanocomposite showed outstanding adsorption capacity and rapid adsorption kinetic for Pb²⁺ removal, and the adsorption behavior followed the Langmuir adsorption model and pseudo-first-model kinetic model. Pb²⁺ uptake by MoS₂?001 still maintains a high level even in the presence of extremely highly competitive ions (Ca(II) and Mg(II)), suggesting its high selectivity for Pb²⁺ adsorption. Besides, the fixed-bed column experiments further certified that MoS₂?001 is of great potential for Pb²⁺ removal from the wastewater in practical engineering applications. Even more gratifying is that the exhausted MoS₂?001 can be regenerated by NaCl-EDTANa₂ solution without any significant adsorption capacity loss. Consequently, all the results indicated that MoS₂?001 is a promising candidate adsorbent for lead-containing wastewater treatment.     

Molecular orientation of azobenzene chromophores in ultrathin polymer nanosheets studied by attenuated total reflection spectroscopy

This paper describes characterization of molecular orientation for azobenzene moieties in a polymer nanosheet. Copolymers of N-[4-(phenylazo)phenyl] acrylamide (PAZoA) with tert-pentyl acrylamide (tPA) were synthesized and the monolayers deposited on tapered quartz waveguides by Langmuir–Blodgett (LB) technique. Spectroscopic properties of the copolymer (p(tPA/PAZoA)) monolayers were monitored by integrated optical waveguide technique on the molecular level. Molecular orientation of the azobenzene was precisely determined by polarized absorption spectra. It was found that the azobenzene groups took a horizontal orientation and distributed uniformly in the p(tPA/PAZoA) monolayer without significant PAZoA aggregation. Photoisomerization process from trans to cis form was also investigated. More than half of the trans form (60–70%) was photoisomerized under unpolarized light irradiation, and the photoisomerization rate was independent on the PAZoA contents. This implies that the microenvironment of PAZoA moieties was almost the same in three different p(tPA/PAZoA) monolayers.     

Orientation transition of nanorods induced by polymer brushes

Coarse-grained molecular dynamics simulations are used to explore the spatial orientations and conformational transitions of nanorods (NRs) within semiflexible polymer brushes. The orientations of the NR clusters are controlled by the competition between the entropy cost for NRs infiltrated into the polymer brushes and the attractive energy between NRs and polymer brushes. By reducing the grafting density or enhancing the number of NRs, the NR cluster experiences an orientation transition from the vertical direction to the horizontal direction. The semiflexible polymer brushes are regarded as the soft confinements for the NRs, and the soft confinements can induce the formation of the NR aggregation under the effect of the depletion attractions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Determination of residual monomer in polymer or polymer solution by sealed glass capillary sampling

Summary Residual styrene in polystyrene and free phenol in phenolic plywood adhesive have been determined by sealing samples in glass capillary tubes. To prevent loss of sample the ends of the capillary tubes were sealed with a kind of putty made of anhydrous calcium sulfare, calcium carbonate and a small quantity of phenylmethylsilicone fluid. No volatile compounds were released from this sealing material when the capillary tubes were placed in a quartz vaporising furnace at temperatures up to 300°C.     

Amplification of small analytes in polymer solution by capillary electrophoresis

We report concentration methods for the analysis of small solutes by capillary electrophoresis in conjunction with laser-induced native fluorescence using a Nd:YAG laser. After injecting samples, poly(ethylene oxide) (PEO) in the anode reservoir entered a capillary filled with Tris-borate buffer. When migrating in PEO solution, the analytes slowed down and stacked at the interface between the sample zone and PEO solution. As a result, the limits of detection (LODs) down to 8 pM for 2-naphthalenesulfonic acid and 70 pM for L-tryptophan have been achieved when injecting at 30 cm height for 120 s and 230 s, respectively. Such low LODs are partially due to the effects of NaCl in the samples and PEO on the fluorescence characteristics of the analytes. In addition, the concentrations of NaCl and PEO have great impacts on the migration of the analytes and electroosmotic flow, thereby affecting resolution and speed. Without pretreatment, the determinations of five important markers in urine samples and two acids in a cerebrospinal fluid sample have been performed separately, with the relative standard deviations of the concentrations less than 3.6%. Furthermore, by applying a short plug of low-pH buffer after injection, the analysis of greater volumes of the urine sample has been carried out, resulting in detecting more peaks.