水合偏硼酸钾的热化学研究

Hydrated potassium monoborate(KBO₂·4/3H₂O) was obtained from an aqueous solution in a mole ratio of K₂O∶B₂O₃=2∶1 and characterized by powder X-ray diffraction(XRD)， infrared spectroscopy(FT-IR) and Raman spectroscopy. The enthalpy of solution of hydrated potassium monoborate， KBO₂·4/3H₂O， in approximately 1mol·dm^-3 aqueous hydrochloric acid was determined. Together with the previously determined enthalpies of so-lution of H₃BO₃ in approximately 1mol·dm^-3 HCl(aq) ，and of KCl in aqueous(hydrochloric acid+boric acid)， the standard molar enthalpy of formation of -(1411.11±0.84)kJ·mol^-1 for KBO₂·4/3H₂O was obtained from the standard molar enthalpies of formation of KCl(s)， H₃BO₃(s)， and H₂O(l). The standard molar entropy of formation of -422.94J·K^-1·mol^-1 and standard molar entropy of 163.47J·K^-1·mol^-1 for KBO₂·4/3H₂O were calculated from the thermodynamic relations. A group contribution method is applicable to KBO₂·4/3H₂O.     

SrB_4O_7·3.5H_2O的合成、表征与热化学研究

合成了一种新型碱土金属硼酸盐SrB4O7·3.5H2O,并对它进行了化学分析、红外光谱(IR)、X射线衍射(XRD)及热分析(TG-DTA)等一系列物相鉴定与表征.通过设计热力学循环,利用微热量计测定了SrB4O7·3.5H2O溶解于约1 mol·L-1HCl水溶液中的摩尔溶解焓,再结合H3BO3在 HCl(aq)的摩尔溶解焓,Sr(OH)2·8H2O(s)溶解于[HCl(aq)+H3BO3(aq)]的摩尔溶解焓,以及H2O(l)、Sr(OH)2·8H2O(s)与 H3BO3(s)的标准摩尔生成焓,得到了SrB4O7·3.5H2O的标准摩尔生成焓为–(4435.15± 3.30)kJ·mol–1.     

SrB4O7·3．5H2O的合成、表征与热化学研究

合成了一种新型碱土金属硼酸盐SrB4O7·3．5H2O,并对它进行了化学分析、红外光谱（IR）、X射线衍射（XRD）及热分析（TC—DTA）等一系列物相鉴定与表征。通过设计热力学循环,利用微热量计测定了SrB4O7·3．5H2O溶解于约1mol·L^-1 HCl水溶液中的摩尔溶解焓,再结合H3BO,在HCl（aq）的摩尔溶解焓,Sr（OH）2·8H2O（s）溶解于[HCl（aq）＋H3BO3（aq）]的摩尔溶解焓,以及H2O（1）、Sr（OH）2·8H2O（s）与H3BO3（s）的标准摩尔生成焓,得到了SrB4O7·3．5H2O的标准摩尔生成焓为-（4435．15±3．30）kJ·mol^-1。     

硝酸铒与丙氨酸配位反应的热化学研究

稀土氨基酸配合物是一类具有应用前景的化合物,它有杀菌、消炎、抗凝血等作用 [1,2], 1975年 Anghileri报道了 La(Gly)3Cl3· 3H2O具有抗肿瘤作用后,更引起了人们的关注,但多数是研究这类配合物的制备和性质 [3～ 5],而对其进行热化学研究的较少,稀土氨基酸配合物的热力学数据目前尚很缺乏。为此,我们进行了这方面的研究工作。 硝酸铒与丙氨酸固体配合物的合成及相平衡研究已有报道 [3,4],其配位反应的热化学性质研究未见报道。本文用量热法分别测定了配位反应的反应物 [Er(NO3)3· 6H2O＋ 4Ala]和产物 [Er(Ala)4(NO3)3· H2…     

水合烟酸钡的合成、结构表征和热化学性质

选择烟酸和氢氧化钡作为反应物,利用室温固相合成方法,借助于球磨技术,合成了一种新的化合物-水合烟酸钡.利用化学分析、元素分析、FTIR和X射线粉末衍射等方法确定了它的组成和结构为Ba(Nic)2·3H2O(s).利用精密自动绝热热量计直接测定了此化合物在78-400 K温区的摩尔热容.在热容曲线上出现了一个明显的吸热峰,通过对热容曲线的解析,得到了相变过程的峰温、相变焓和相变熵分别为(327.097±1.082)K、(16.793±0.084)kJ·mol-1和(51.340±0.164)J·K-1·mol-1将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp,m)对温度(T)的多项式方程,并且在此基础上计算出了它的舒平热容值和各种热力学函数值.另外,依据Hess定律,通过设计合理的热化学循环,选择体积为100mL、浓度为0.5mol·L-1的盐酸作为量热溶剂,利用等温环境溶解-反应热量计分别测量固相反应的反应物和产物在所选溶剂中的溶解焓,利用溶解焓确定固相反应的反应焓为△rH0m=-(84.12±0.38)kJ·mol-1.最后,利用固相反应的反应焓和其它反应物和产物已知的热力学数据计算出水合烟酸钡的标准摩尔生成焓为△rH0m[Ba(Nic)2·3H2O(s)]=-(2115.13±1.90)kJ·mol-1.     

白硼钙石的合成新方法及其热化学研究(英)

0IntroductionTherearemanykindsofhydratedcalciumbo-rates,bothnaturalandsynthetic.Someofthemarematerialsusedinglass,potteryandporcelainenamelindustry,especiallyinunalkaliglassindustry.4CaO·5B2O3·7H2O,calledpriceite,isacalciumboratemin-eral,notfoundinCaO-B…     

硝酸镧与丙氨酸反应的热化学研究

稀土离子具有独特的生理、生化特性．氨基酸是体内蛋白质分子的基本单元,它通过ＤＮＡ,ｍＤ－ＮＡ复制、转录、翻译成不同类型的蛋白质分子．１９２８年Ｆｅｉｆｅｒ首次合成,１９７５年Ａｎｙｈｉｌｅｒｉ报道了稀土氨基酸配合物Ｌａ（Ｇｌｙ）３·Ｃｌ３·Ｈ２Ｏ的抗肿瘤作用．显然,研究稀土氨基酸配合物具有十分重要的意义．近年来,对稀土氨基酸配合物的研究已成为化学和生物学交叉领域的研究热点［１－５］．认识它们的基本热力学性质也变得越来越重要．但是,国内外在这方面的研究尚处于开拓时期． 姜相武等［４］在 ３５℃时对体…     

水合烟酸钡的合成、±结构表征和热化学性质

选择烟酸和氢氧化钡作为反应物, 利用室温固相合成方法, 借助于球磨技术, 合成了一种新的化合物——水合烟酸钡. 利用化学分析、元素分析、FTIR和X射线粉末衍射等方法确定了它的组成和结构为Ba(Nic)2·3H2O(s). 利用精密自动绝热热量计直接测定了此化合物在78-400 K温区的摩尔热容. 在热容曲线上出现了一个明显的吸热峰, 通过对热容曲线的解析, 得到了相变过程的峰温、相变焓和相变熵分别为(327.097±1.082) K、(16.793±0.084) kJ·mol-1和(51.340±0.164) J·K-1·mol-1. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp,m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 另外, 依据Hess定律, 通过设计合理的热化学循环, 选择体积为100 mL、浓度为0.5 mol·L-1的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计分别测量固相反应的反应物和产物在所选溶剂中的溶解焓, 利用溶解焓确定固相反应的反应焓为⊿rH0m=-(84.12±0.38) kJ·mol-1. 最后, 利用固相反应的反应焓和其它反应物和产物已知的热力学数据计算出水合烟酸钡的标准摩尔生成焓为⊿fH0m[Ba(Nic)2·3H2O(s)]=-(2115.13±1.90) kJ·mol-1.     

氯化镧与甘氨酸配位反应的热化学研究

The reaction enthalpy of coordination reaction of lanthanum chloride with Glycine is determined by solution calorimetry in an isoperibel reaction calorimeter. The calormetric solvent is the solution of hydrochloric acid (2 mol·L- 1), a new thermochemical cycle is designed. According to the results, the following date:()(298.2 K)=- 4.310 kJ·mol- 1()(La(Gly)3Cl3· 5H2O, s, 298.2 K)=- 4222.93 kJ·mol- 1 were obtained.     

New synthetic method and thermochemistry of szaibelyite

A new synthetic method of szaibelyite (2MgO·B₂O₃·H₂O) has been reported. The enthalpy of solution of 2MgO·B₂O₃·H₂O in 2.9842 mol dm⁻³ HCl (aq) was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in 2.9842 mol dm⁻³ HCl (aq) and of MgO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of MgO (s), H₃BO₃ (s), and H₂O (l), the standard molar enthalpy of formation of −(2884.36±1.82) kJ mol⁻¹ of 2MgO·B₂O₃·H₂O was obtained.     

2-吡嗪羧酸银的合成、晶体结构及热化学性质

以二次蒸馏水为溶剂,合成了2-吡嗪羧酸银(Ag(pyza)(s)),并利用X-射线单晶衍射法表征了其晶体结构.根据晶体结构数据计算得到2-吡嗪羧酸银的晶格能为554.10 kJ/mol.利用TG/DSC热分析技术研究了该化合物的热分解过程;用精密自动绝热热量计测量了其在78~378 K温区的低温热容;通过最小二乘法拟合得到了摩尔热容随折合温度变化的多项式方程,利用此方程计算出该化合物的舒平热容和各种热力学函数.通过设计合理的热化学循环,利用等温环境溶解-反应热量计分别测定了所设计热化学反应的反应物和产物在选定溶剂中的溶解焓,通过计算得到反应的反应焓为:?(31.919±0.526)kJ/mol.利用Hess定律计算出2-吡嗪羧酸银的标准摩尔生成焓为:?(243.659±1.298)kJ/mol.利用紫外-可见光谱仪对反应物和产物溶解所得溶液分别进行测量,从而证实了所设计热化学循环的可靠性.     

电化学方法测定纳米材料的热力学函数

以纳米铜为例,首次采用电化学方法获取纳米材料的热力学函数.通过电化学沉积法制备了粒子尺寸约80nm的纳米铜电极,测定纳米铜与块体铜电极的电势差,以块体铜的热力学函数值为参考标准,根据纳米铜与块体铜的热力学关系式,求得纳米铜的标准摩尔生成焓、标准摩尔生成吉布斯自由能、标准摩尔熵分别为5.16kJmol-1、0.216kJmol-1、49.75JK-1mol-1,同时,求得纳米铜可逆电池反应的热效应为-4.95kJmol-1.     

Thermodynamic properties of thiosamarates of calcium and barium and phases based on them

Effect of the nature of the alkaline-earth metal on the electrolytic and thermodynamic properties intrinsic to ternary thiosamarates of barium and calcium, which are capable of forming sulfide-conductive solid electrolytes, is considered. The thermodynamic property are examined by resorting to various modifications of the EMF method in concentration circuits with transfer. Dependence of the activity of binary CaS, BaS, and Sm₂S₃ in ternary MeSm₂S₄ on the composition of solid solutions is investigated with simultaneous determination of cationic and anionic transport numbers. The tendency of variations in the partial molar dissolution enthalpy \(\Delta \bar H_{Sm_2 S_3 } \) in thiosamarates of alkaline-earth metals is studied as a function of the doping-additive content. The vacancy mechanism of the defect formation in the phases under investigation is confirmed. Thermodynamics of the formation of ternary BaSm₂S₄ out of binary sulfides is explored and \(\Delta H_{fBaSm_2 S_4 }^0 \) is determined for the first time ever.     

Synthesis and thermochemistry of SrB2O4·4H2O and SrB2O4

Two pure strontium borates SrB₂O₄·4H₂O and SrB₂O₄ have been synthesized and characterized by means of chemical analysis and XRD, FT-IR, DTA-TG techniques. The molar enthalpies of solution of SrB₂O₄·4H₂O and SrB₂O₄ in 1 mol dm⁻³ HCl(aq) were measured to be −(9.92 ± 0.20) kJ mol⁻¹ and −(81.27 ± 0.30) kJ mol⁻¹, respectively. The molar enthalpy of solution of Sr(OH)₂·8H₂O in (HCl + H₃BO₃)(aq) were determined to be −(51.69 ± 0.15) kJ mol⁻¹. With the use of the enthalpy of solution of H₃BO₃ in 1 mol dm⁻³ HCl(aq), and the standard molar enthalpies of formation for Sr(OH)₂·8H₂O(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpies of formation of −(3253.1 ± 1.7) kJ mol⁻¹ for SrB₂O₄·4H₂O, and of −(2038.4 ± 1.7) kJ mol⁻¹ for SrB₂O₄ were obtained.     

Thermal properties and thermochemistry of lanthanide chromates

The behavior of chromates Ln₂(CrO₄)₃·7H₂O and Rb₅Ln(CrO₄)₂ (Ln = La, Pr, Nd, Sm, and Gd) was studied by derivatography as they were heated in air in a temperature interval of 300–1470 K. The high temperature enthalpies of LaCrO₃ and YCrO₃ at 865–1350 K and enthalpies of solution of La₂(CrO₄)₃·7H₂O in a solution of nitric acid at 298 K were measured by calorimetric methods. The standard enthalpies of formation were calculated for some compounds of composition Ln₂(CrO₄)₃·2H₂O and LnCrO₃.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 290–295, February, 2005.     

Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.