Application of carbon materials as counter electrodes of dye-sensitized solar cells

Hard carbon spherule (HCS) has been investigated as a counter electrode for dye-sensitized solar cells. The overall conversion efficiency of the cell reached 5.7%, which is comparable to 6.5% of the counter electrode of platinum-sputtered fluorine-doped tin oxide used in Grätzel-type solar cells under the same experimental condition. It is found that the photovoltaic performance was strongly affected by the specific surface areas of the carbon materials.     

Platinum/carbon black composites as counter electrodes for high-performance dye-sensitized solar cells

Journal of Solid State Electrochemistry - Low-cost counter electrodes for dye-sensitized solar cells (DSSCs) are prepared using platinum/carbon black (Pt/CB) composites via a spin-coating process....     

Metal/metal sulfide functionalized single-walled carbon nanotubes: FTO-free counter electrodes for dye sensitized solar cells

The use of single-walled carbon nanotubes (CNT) thin films to replace conventional fluorine-doped tin oxide (FTO) and both FTO and platinum (Pt) as the counter electrode in dye sensitized solar cells (DSSC) requires surface modification due to high sheet resistance and charge transfer resistance. In this paper, we report a simple, solution-based method of preparing FTO-free counter electrodes based on metal (Pt) or metal sulfide (Co(8.4)S(8), Ni(3)S(2)) nanoparticles/CNT composite films to improve device performance. Based on electrochemical studies, the relative catalytic activity of the composite films was Pt > Co(8.4)S(8) > Ni(3)S(2). We achieved a maximum efficiency of 3.76% for the device with an FTO-free counter electrode (Pt/CNT). The device with an FTO- and Pt-free (CoS/CNT) counter electrode gives 3.13% efficiency.     

Performance of dye-sensitized solar cells with various carbon nanotube counter electrodes

Double-wall carbon nanotubes (DWCNTs), single-wall carbon nanotubes (SWCNTs), and multi-wall carbon nanotubes (MWCNTs) were investigated as an alternative for platinum in counter-electrodes for dye-sensitized solar cells. The counter-electrodes were prepared on fluorine-doped tin oxide glass substrates by the screen printing technique from pastes of carbon nanotubes and organic binder. The solar cells were assembled from carbon nanotubes counter-electrodes and screen printed anodes made from titanium dioxide. The cells produced with DWCNTs, SWCNTs or MWCNTs have overall conversion efficiencies of 8.0%, 7.6% and 7.1%, respectively. Electrochemical impedance spectroscopy measurements revealed that DWCNTs displayed the highest catalytic activity for the reduction of tri-iodide ions. The large surface area and superior chemical stability of the DWCNTs facilitated the electron-transfer kinetics at the interface between counter-electrode and electrolyte and yielded the lowest transfer resistance, thereby improving the photovoltaic activity. A short-term stability test at moderate conditions confirmed the robustness of solar cells based on the use of DWCNTs, SWCNTs or MWCNTs.

Multi-wall carbon nanotube counter electrodes for dye-sensitized solar cells prepared by electrophoretic deposition

In this study, electrophoretic deposition (EPD) was employed to fabricate multi-wall carbon nanotube (MWCNT) counter electrodes (CEs) for dye-sensitized solar cells (DSSCs). Firstly, raw MWCNTs were functionalized by means of an acid mixture solution and then subjected to EPD. The results obtained from Raman spectroscopy, Fourier transform infrared spectroscopy, field-emission scanning electron microscope, and cyclic voltammogram demonstrated that the defects and open ends on the MWCNTs can be obtained via chemical functionalization and thus facilitate the enhancement in the electrocatalytic activity for I₃⁻ reduction of MWCNT CEs. In addition to optimizing chemical functionalization of MWCNTs surface, the optimal thickness of MWCNT CEs prepared by EPD was also investigated. Additionally, consecutive cyclic voltammetric tests demonstrated that the MWCNT CE fabricated by EPD possessed excellent electrochemical stability. In comparison with MWCNT CEs fabricated by tape-casting approach, MWCNT CEs prepared by EPD presented a superior adhesion between MWCNT deposits and conducting glass substrates. Therefore, MWCNT CEs fabricated by EPD can be of great potential for use in low-cost plastic DSSCs.     

Economical and effective sulfide catalysts for dye-sensitized solar cells as counter electrodes

Molybdenum sulfide (MoS(2)) and tungsten sulfide (WS(2)) are proposed as counter electrode (CE) catalysts in a I(3)(-)/I(-) and T(2)/T(-) based dye-sensitized solar cells (DSCs) system. The I(3)(-)/I(-) based DSCs using MoS(2) and WS(2) CEs achieved power conversion efficiencies of 7.59% and 7.73%, respectively.     

Polypyrrole-cobalt-carbon nanocomposites as efficient counter electrode materials for dye-sensitized solar cells

In this work, we demonstrate a new kind of Pt-free counter electrode for dye-sensitized solar cells(DSCs). Polypyrrole-cobalt-carbon(PPY-Co-C) nanocomposites, with the advantages of low cost and simple preparation, show favorable catalytic activity in promoting tri-iodide reduction. The DSC composed of the PPY-Co-C nanocomposite electrode exhibits an acceptable energy conversion efficiency of 6.01%, a considerable short-circuit photocurrent of 15.33 mA cm-2, and a low charge-transfer resistance of 1.5 Ω cm2. The overall performance of PPY-Co-C is superior to the carbon counterparts and comparable with the platinum reference, rendering them efficient and promising counter electrode materials for DSCs.     

Low temperature fabrication of efficient porous carbon counter electrode for dye-sensitized solar cells

Porous carbon counter electrodes have been fabricated at low temperature by coating an organic binder free carbon slurry onto F-doped tin oxide conducting glass. The carbon slurry is prepared by ball-milling a dispersion of activated carbon in aqueous SnCl₄ solution. During ball-milling, SnCl₄ hydrolyzes and transforms into stannic acid gel, which acts as an inorganic “glue” to connect the carbon particles during film preparation. Dye-sensitized solar cells employing this carbon electrode achieve efficiency as high as 6.1% which is comparable to that of the cells using sputtering Pt as counter electrode.     

High-performance Pt-NiO nanosheet-based counter electrodes for dye-sensitized solar cells

High-performance counter electrodes for dye-sensitized solar cells (DSSCs) are fabricated with platinum-nickel oxide (Pt-NiO) nanosheets as catalytic materials. Firstly, the Pt-Ni nanosheets are synthesized via galvanic replacement reaction between pre-synthesized Ni nanosheets and an aqueous H₂PtCl₆ solution. Secondly, after thermal treatment in air, the Pt-Ni alloys are turned to Pt-NiO nanosheets. The related data of cyclic voltammetry, electrochemical impedance spectroscopy, and Tafel polarization reveal that Pt-NiO counter electrodes show highly catalytic activity and low charge transfer resistance. The DSSC with Pt-NiO counter electrode exhibits power conversion efficiency (PCE) of 8.40 %, which is lower than that of the DSSC containing commercial available Pt counter electrode (9.15 %) under full sunlight illumination (100 mW cm^?2, AM1.5G). However, owing to the extremely high transparency of Pt-NiO counter electrode, when putting an Ag mirror behind the back side of the DSSC, the reflected light can bring great enhanced PCE (11.27 %).     

Non-precious transition metal-based counter electrodes for dye-sensitized solar cells

Journal of Solid State Electrochemistry - A non-platinum metal catalyst, TiNx-C, was synthesized through the high-pressure pyrolysis method, which was characterized using a transmission electron...     

Transferred vertically aligned N-doped carbon nanotube arrays: use in dye-sensitized solar cells as counter electrodes

We prepared vertically aligned nitrogen doped carbon nanotubes (CNTs) on a rigid glass substrate or flexible plastic substrate via a 'growth-detachment-transfer' process and the vertically aligned N-doped CNT arrays are employed as counter electrodes for novel dye-sensitized solar cells.     

Fabrication of double-walled carbon nanotube counter electrodes for dye-sensitized solar sells

Double-walled carbon nanotubes (DWCNTs) have been studied for counter-electrode application in dye-sensitized solar cells (DSCs). Mesoporous TiO2 films are prepared from the commercial TiO2 nanopowders by screen-printing technique on optically transparent-conducting glasses. A metal-free organic dye (indoline dye D102) is used as a sensitizer. DWCNTs are applied to substitute for platinum as counter-electrode materials. Morphological and electrochemical properties of the formed counter electrodes are investigated by scanning electronic microscopy and electrochemical impedance spectroscopy, respectively. The electronic and ionic processes in platinum and DWCNT-based DSCs are analyzed and discussed. The catalytic activity and DSC performance of DWCNTs and Pt are compared. A conversion efficiency of 6.07% has been obtained for DWCNT counter-electrode DSCs. This efficiency is comparable to that of platinum counter-electrode-based devices.     

Economical Pt-free catalysts for counter electrodes of dye-sensitized solar cells

Three classes (carbides, nitrides and oxides) of nanoscaled early-transition-metal catalysts have been proposed to replace the expensive Pt catalyst as counter electrodes (CEs) in dye-sensitized solar cells (DSCs). Of these catalysts, Cr(3)C(2), CrN, VC(N), VN, TiC, TiC(N), TiN, and V(2)O(3) all showed excellent catalytic activity for the reduction of I(3)(-) to I(-) in the electrolyte. Further, VC embedded in mesoporous carbon (VC-MC) was prepared through in situ synthesis. The I(3)(-)/I(-) DSC based on the VC-MC CE reached a high power conversion efficiency (PCE) of 7.63%, comparable to the photovoltaic performance of the DSC using a Pt CE (7.50%). In addition, the carbide catalysts demonstrated catalytic activity higher than that of Pt for the regeneration of a new organic redox couple of T(2)/T(-). The T(2)/T(-) DSCs using TiC and VC-MC CEs showed PCEs of 4.96 and 5.15%, much higher than that of the DSC using a Pt CE (3.66%). This work expands the list of potential CE catalysts, which can help reduce the cost of DSCs and thereby encourage their fundamental research and commercial application.     

Highly efficient quasi-solid-state quantum-dot-sensitized solar cell based on hydrogel electrolytes

Chemically crosslinked polyacrylamide-based hydrogel has been first used as the polymer matrix to prepare quasi-solid-state polysulfide electrolyte for CdS/CdSe co-sensitized solar cells (QDSCs). The room temperature ionic conductivity of the gel electrolyte reaches 0.093 S·cm^?1. QDSCs based on this quasi-solid-state electrolyte can present up to 4.0% of light-to-electricity conversion efficiency. Meanwhile, the interfacial recombination at TiO₂/electrolyte interface of the cell is also investigated by Electrochemical Impedance Spectroscopy (EIS).     

Solution processed transition metal sulfides: application as counter electrodes in dye sensitized solar cells (DSCs)

A solution processed method for fabricating transition metal sulfides on fluorine doped tin oxide (FTO) as efficient counter electrodes in iodine/iodide based solar cells has been demonstrated. Conversion efficiencies of 7.01% and 6.50% were obtained for nickel and cobalt sulfides, respectively, comparable to the conventional thermally platinised FTO electrodes (7.32%). A comparable charge transfer resistance of Ni(3)S(2) and Co(8.4)S(8) to conventional Pt was found to be a key factor for such high efficiencies. Cyclic voltammetry, Kelvin probe microscopy, Electrochemical Impedance Spectroscopy, and Tafel polarization were performed to study the underlying reasons behind such efficient counter electrode performance.     

Platinum-free tungsten carbides as an efficient counter electrode for dye sensitized solar cells

Mesoporous tungsten carbides displayed an excellent solar conversion efficiency (7.01%) as a counter electrode for dye sensitized solar cells under 100 mW cm(-2), AM 1.5G illumination, which corresponded to ca. 85% of the efficiency of the conventional platinum electrode.     

Novel coal-based carbon/CNTs composite counter electrode for highly efficient ZnO-based dye-sensitized solar cells

Journal of Solid State Electrochemistry - An interesting subject of non-fuel utilization of coal is the synthesis of high-performance coal-based carbon (CBC) materials to replace expensive Pt...     

Highly efficient CdSe quantum-dot-sensitized TiO2 photoelectrodes for solar cell applications

With 4.2 nm quantum-dots (QDs) as seeds on TiO₂ film, a highly efficient TiO₂ photoelectrode was prepared by a seed-growing process using chemical bath deposition technique, followed by a covering process with ZnS layer, and a post-sintering process at 400 °C. The assembled solar cells presented IPCE peak values of 73% and power conversion efficiency of 3.21% under AM 1.5 G irradiation.