Covalent immobilization of albumin on micron‐sized magnetic poly(methyl methacrylate‐divinylbenzene‐glycidyl methacrylate) microspheres prepared by modified suspension polymerization

Micron‐sized magnetic poly(methyl methacrylate‐divinylbenzene‐glycidyl methacrylate) microspheres were prepared by a modified suspension polymerization in the presence of oleic acid‐coated magnetite nanoparticles. The magnetic microspheres were functionalized by reacting the epoxy groups with ammonia solution to provide amino groups. After activated with glutaraldehyde (GA), bovine serum albumin was covalently immobilized on these magnetic microspheres. The influence of initial protein concentration, pH and ionic strength of the protein solution on covalent immobilization was studied. Scanning electron micrographs showed that the magnetic microspheres had an average size of 6.4 µm and relative narrow size distribution. Magnetic measurement revealed the magnetic microspheres were superparamagetic with saturation magnetization of 7.32 emu/g. The successful amination of the magnetic microspheres was confirmed by Fourier transform infrared spectroscopy (FT‐IR). Copyright © 2005 John Wiley & Sons, Ltd.     

A Novel Magnetism‐assisted Electrochemical Immunosensor with Sub‐Picomolar Sensitivity

A novel electrochemical immunosensor based on a magnetic glassy carbon electrode (MGCE) was developed for the quantitative determination of human immunoglobulin G (IgG). The immunosensing interface was fabricated by initially depositing silver nanoparticles on the MGCE surface and then immobilizing anti‐human IgG antibodies via the magnetic force between MGCE and Fe₃O₄ nanoparticles. The antibodies were covalently bonded to the amine‐functionalized Fe₃O₄ nanoparticles. Under optimal conditions, the magnetism‐assisted immunosensor exhibited a wide linear range from 0.1 pg/mL to 1.0 µg/mL with the detection limit of 0.05 pg/mL. Furthermore, the immunosensor displayed the advantages of good reproducibility and satisfactory stability.     

RAFT‐mediated synthesis of poly[(oligoethylene glycol) methyl ether acrylate] brushes for biological functions

The synthesis of poly[(oligoethylene glycol) methyl ether acrylate] [poly(OEGA)] brushes was achieved via reversible addition‐fragmentation chain transfer (RAFT) polymerization and used to selectively immobilize streptavidin proteins. Initially, gold surfaces were modified with a trithiocarbonate‐based RAFT chain transfer agent (CTA) by using an ester reaction involving a gold substrate modified with 11‐mercapto‐1‐undecanol and bis(2‐butyric acid)trithiocarbonate. poly(OEGA) brushes were then prepared via RAFT‐mediated polymerization from the surface‐immobilized CTA. The immobilization of CTA on the gold surface and the subsequent polymer formation were followed by ellipsometry, X‐ray photoelectron spectroscopy, grazing angle‐Fourier transform infrared spectroscopy, atomic force microscopy, and water contact‐angle measurements. RAFT‐mediated polymerization method gave CTA groups to grafted poly(OEGA) termini, which can be converted to various biofunctional groups. The terminal carboxylic acid groups of poly(OEGA) chains were functionalized with amine‐functionalized biotin units to provide selective attachment points for streptavidin proteins. Fluorescence microscopy measurements confirmed the successful immobilization of streptavidin molecules on the polymer brushes. It is demonstrated that this fabrication method may be successfully applied for specific protein recognition and immobilization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation and application of streptavidin magnetic particles

Two kinds of streptavidin magnetic particles,namely streptavidin GoldMag particles and streptavidin amino terminal particles were prepared by the methods of physical adsorption and covalent interaction respectively.The streptavidin coated on magnetic particle surface,crucial to many applications,was greatly influenced by the choice of the different buffer.Compared with DynalbeadsM-270 streptavidin, the binding capacity for biotin of different streptavidin magnetic particles was determined by enzyme inhibition method,and the coupling capacity and activity of biotinylated oligonucleotide on their sur- face were also analyzed.The results indicated that the streptavidin GoldMag particle prepared by physical adsorption was stable in STE(NaCl-Tris-EDTA)buffer that was frequently used in nucleic acid hybridization and detection.The streptavidin amino terminal particles prepared by covalent interaction could be used both in STE buffer and PBS(phosphate buffered saline)buffer.The biotin binding ca- pacity for 1 mg of streptavidin GoldMag particles and streptavidin amino terminal particles was 4950 and 5115 pmol respectively.The capacity of biotinylated oligonucleotide(24 bp)coupled on 1 mg of GoldMag and amino terminal magnetic particles was 2839 and 2978 pmol separately.These data were about 6-7 times higher than those of DynabeadsM-270 streptavidin.The hybridization results with FITC-labeled complementary probe on magnetic particle surface demonstrated that the oligonucleotide coupled on streptavidin magnetic particles had high biological activity.     

Superior magnetic monodisperse particles for direct purification of immunoglobulin G under magnetic field

Monodisperse magnetic acrylate based particles (5.0 µm in diameter) containing histidine were synthesized using a modified suspension polymerization method for the purification of immunoglobulin G from human plasma in a magnetically stabilized fluidized bed. N-methacryloyl-(L)-histidine methyl ester (MAH) was used as pseudo-specific ligand/co-monomer. MAH content of the magnetic particles was calculated as 55.3 µmol MAH/g polymer using elemental analysis. Immunoglobulin G binding amount of the magnetic particles decreased with increase of the flow-rate. The maximum immunoglobulin G binding was observed at pH 7.4 (phosphate buffer). Immunoglobulin G binding amount onto the magnetic poly(ethylene glycol dimethacrylate) [mPEGDMA] particles was found to be almost negligible due to the hydrophilic polymer structure. High binding values were obtained from aqueous solutions (1646 mg/g). Higher immunoglobulin G binding was observed when human plasma was used (2169 mg/g). Purity of the separated immunoglobulin G from human plasma was found to be 87%. Magnetic PEGDMAH particles could be used many times without significant loss in protein binding amount.     

Adsorption and adhesion studies of PdSn‐nanoparticles on protonated amine and carboxylic acid‐terminated surfaces

Electroless plating of acrylonitrile‐butadiene‐styrene‐terpolymers (ABS‐plastics) is used for decorative applications and relies on the immobilization of catalytic palladium‐tin nanoparticles. We used chemical force microscopy to measure the adhesion force of palladium‐tin nanoparticles on a patterned amine and carboxyl‐terminated surface prepared by micro‐contact printing. The kinetics of the adsorption process and the population density of the nanoparticles on amine and carboxyl‐terminated surfaces were monitored by quartz crystal microbalance with dissipation analysis. The surface chemistry was investigated by means of polarization‐modulated infrared reflection absorption spectroscopy and X‐ray photoelectron spectroscopy. Enhanced adhesion and population density of PdSn nanoparticles on protonated amine‐terminated surfaces compared with carboxyl‐terminated surfaces is observed. Copyright © 2016 John Wiley & Sons, Ltd.     

Immobilized streptavidin gradients as bioconjugation platforms

Surface density gradients of streptavidin (SAV) were created on solid surfaces and demonstrated functionality as a bioconjugation platform. The surface density of immobilized streptavidin steadily increased in one dimension from 0 to 235 ng cm(-2) over a distance of 10 mm. The density of coupled protein was controlled by its immobilization onto a polymer surface bearing a gradient of aldehyde group density, onto which SAV was covalently linked using spontaneous imine bond formation between surface aldehyde functional groups and primary amine groups on the protein. As a control, human serum albumin was immobilized in the same manner. The gradient density of aldehyde groups was created using a method of simultaneous plasma copolymerization of ethanol and propionaldehyde. Control over the surface density of aldehyde groups was achieved by manipulating the flow rates of these vapors while moving a mask across substrates during plasma discharge. Immobilized SAV was able to bind biotinylated probes, indicating that the protein retained its functionality after being immobilized. This plasma polymerization technique conveniently allows virtually any substrate to be equipped with tunable protein gradients and provides a widely applicable method for bioconjugation to study effects arising from controllable surface densities of proteins.     

A Renewable Potentiometric Immunosensor Based on Fe3O4 Nanoparticles Immobilized Anti‐IgG

A renewable potentiometric immunosensor for detection of immunoglobulin G (IgG) has been developed by magnetic force attraction of Fe₃O₄ nanoparticles immobilized goat‐anti‐human IgG antibody. For preparing sensitive film of the sensor, cysteine was bonded on the nano‐Fe₃O₄ particles surface. The cysteine functionalized magnetic nanoparticles was attracted on a solid paraffin carbon paste electrode surface to covalently immobilize of anti‐immunoglobulin G (anti‐IgG) by employing a conventional glutaraldehyde‐crosslinking method. The immunosensor showed a specific response to human immunoglobulin G in the range of 0.1–1.2 ng/mL with a detection limit of 0.023 ng/mL. The immunosensor based on the magnetic nanoparticles was made easily by this method. It can be used expediently, renewed easily and low‐cost relatively. The renewable potentiometric immunosensor with better stability and higher sensitivity can be employed extensively in clinical diagnosis, monitoring of disease and environmental studies and etc.     

Photopatterned surfaces for site-specific and functional immobilization of proteins

Photosensitive silanes containing nitroveratryl (Nvoc)-caged amine groups and protein repellent tetraethylene glycol units were synthesized and used for modification of silica surfaces. Functional surface layers containing different densities of caged amine groups were prepared and activated by UV-irradiation of the surface. The performance of these layers for functional and site-selective immobilization of proteins was tested. For this purpose, biotin and tris-nitrilotriacetic acid (tris-NTA) were fist coupled to the activated surface, and the interaction of streptavidin and His-tagged proteins with the functionalized surfaces was monitored by real-time label-free detection. After optimizing the coupling protocols, highly selective functionalization of the deprotected amine groups was possible. Furthermore, the degree of functionalization (and therefore the amount of immobilized protein) was controlled by diluting the surface concentration of the amine-functionalized silane with a nonreactive (OMe-terminated) tetraethylene glycol silane. Immobilized proteins were highly functional on these surfaces, as demonstrated by protein-protein interaction assays with the type I interferon receptor. Protein micropatterns were successfully generated after masked irradiation and functionalization of the caged surface following the optimized coupling protocols.     

Separation method based on affinity reaction between magnetic and nonmagnetic particles for the analysis of particles and biomolecules

A separation method is reported for particle and biochemical analysis based on affinity interactions between particle surfaces under magnetic field. In this method, magnetic particles with immunoglobulin G (IgG) or streptavidin on the surface are flowed through a separation channel to form a deposition matrix for selectively capturing nonmagnetic analytes with protein A or biotin on the surface due to specific antigen (Ag)--antibody (Ab) interactions. This separation method was demonstrated using model reactions of IgG--protein A and streptavidin-biotin on particle surface. The features of this new separation method are (1) the deposited Ag-Ab complex can be examined and further analyzed under the microscope, (2) a kinetic study of complex binding is possible, and (3) the predeposited matrix can be formed selectively and changed easily. The detection limits were about 10(-11) g. The running time was less than 10 min. The selectivities of studied particles were 94% higher than those of label-controlled particles. This method extends the applications of analytical magnetapheresis to nonmagnetic particles. Preliminary study shows that this separation method has a great potential to provide a simple, fast, and selective analysis for particles, blood cells, and immunoassay related applications.     

Evaluation of Binding Between Electroactive Biotin Derivative and Streptavidin Immobilized on Chitin Film

Evaluation of the streptavidin‐biotin binding at the surface of chitin film was carried out with voltammetry. Immobilization of streptavidin was attempted to the protonated chitin film, based on an electrostatic interaction that hardly causes any change in the protein structure. The streptavidin‐biotin binding was estimated from changes in the electrode response of biotin labeled with an electroactive compound. Although the response of daunomycin as an electroactive compound did not change at an electrode covered with streptavidin/chitin film, the response of the labeled biotin decreased. This observation shows that streptavidin is immobilized on the chitin film and the biotin binds with immobilized streptavidin. Consequently, it was clear that the chitin film is useful as a reaction field for protein‐ligand binding. Generally, a binding event between protein and its ligand in the living body occurs on the cell surface. The electrochemical evaluation of protein‐ligand binding on a natural polysaccharide like chitin membrane surface is important.     

Comparative study of random and oriented antibody immobilization as measured by dual polarization interferometry and surface plasmon resonance spectroscopy

Dual polarization interferometry (DPI) is used for a detailed study of antibody immobilization with and without orientation control, using prostate specific antigen (PSA) and its antibody as model. Thiol modified DPI chips were activated by a heterobifunctional cross-linker (sulfo-GMBS). PSA antibody was either directly immobilized via covalent binding or coupled via the Fc-fragment to protein G covalently attached to the activated chip. The direct covalent binding leads to a random antibody orientation and the coupling through protein G leads to an end-on orientation. Ethanolamine (ETH) was used to block remaining active sites following the direct antibody immobilization and protein G immobilization. A homobifunctional cross-linker (BS3) was used to stabilize the antibody layer coupled on protein G. DPI provides a real-time measurement of the stepwise molecular binding processes and gives detailed geometrical and structural values of each layer, i.e., thickness, mass, and density. These values evidence the end-on orientation of closely packed antibody on protein G layer and reveal structural effects of ETH blocking/deactivation and BS3 stabilization. With the end-on immobilized antibody, PSA at 10 pg/mL can be detected by DPI through a sandwich complex that satisfies the clinical requirement (assuming <30 pg/mL as clinically safe). However, the randomly immobilized antibody failed to detect PSA at 1 ng/mL. In a parallel study using surface plasmon resonance (SPR) spectroscopy, random and end-on antibody immobilization on streptavidin-modified gold surface was evaluated to further validate the importance of antibody orientation control. With the closely packed antibody layer on protein G surface, SPR can also detect PSA at 10 pg/mL.     

Quantum Dot-Based Biosensor for the Detection of Human T-Lymphotropic Virus-1

A method was developed to identify human T-lymphotropic virus-1 (HTLV-1) using cadmium–tellurium quantum dots. Two probes including the biotin-labeled acceptor and NH2-reporter probes with target DNA were hybridized. The resulted sandwich complex was immobilized on a well containing streptavidin. The quantum dot solution was added to the sandwich complex, conjugated with the amine group of reporter probe, and emission spectra of the quantum dots were recorded. The biosensor response was linear with HTLV-1 concentrations from 10 pg/µl to 0.24?ng/µl, with a detection limit of 19.5 pg/µl. The assay may be successfully used for detection of long nucleic acids.     

Oriented immobilization of antibodies by a self-assembled monolayer of 2-(biotinamido)ethanethiol for immunoarray preparation

Orientation of antibodies is very important in the preparation of immunoarrays to keep the activity of antibodies on solid surfaces. Thus, we synthesized a new bifunctional compound, 2-(biotinamido)ethanethiol, and investigated whether the thiol compound is useful to analyze antibody-antigen interactions on immunoarrays with a spectral SPR biosensor. The synthesized organic thiol was characterized by nuclear magnetic resonance spectroscopy and mass spectrometry. 2-(Biotinamido)ethanethiol formed a monolayer on a gold surface and properly immobilized antibodies via streptavidin and biotinylated protein G. Optimal molar ratio of 2-(biotinamido)ethanethiol and mercaptohexanol for antigen-antibody interactions was 1:2. Thus, 2-(biotinamido)ethanethiol is an useful bifunctional linker in the preparation of immunoarrays on gold surfaces.     

亲水性含环氧基磁性聚合物微球的制备与性能表征

选择甲酰胺作磁性Fe3O4微晶的分散剂,通过设计反相悬浮聚合体系,合成了粒径分布窄、球状亲水性含环氧基磁性聚合物(MGM).利用扫描电子显微镜(SEM)、红外光谱(FT-IR)、X射线粉末衍射仪(XRD)、振动样品磁强计(VSM)和低温N2吸附以及化学分析方法对聚合物进行了性能表征.结果表明,合成的MGM呈球形,且粒度分布较窄,粒径为0.13~0.28 mm的粒子占91%;甲酰胺分散Fe3O4,微晶表面的亲水性进一步增强,单体甲基丙烯酸缩水甘油酯和N,N′-亚甲基双丙烯酰胺交联共聚生成的胶粒能够包埋Fe3O4微晶形成胶核,胶核聚集形成均匀、稳定的MGM微球.MGM中Fe3O4含量为6.17%时,比饱和磁化强度σs达6.5 emu/g;其比表面积、平均孔径和孔容分别为117.6 m2/g,15.6 nm和0.46 cm3/g,表面环氧基团含量为0.53 mmol/g.MGM借助自身的活性环氧基团在十分温和的条件下共价偶联青霉素酰化酶(penicillin G acylase EC 3.5.1.11,简称PGA),制备的固定化酶在37℃下催化水解青霉素G钾生成6-氨基青霉烷酸(6-APA)的表观活性达502IU/g,并且在使用过程中没有出现磁聚集现象.     

Multi‐instrument characterization of poly(divinylbenzene) microspheres for use in liquid chromatography: as received,air oxidized,carbonized, and acid treated

We report a multi‐instrument characterization of the carbon particles in carbon/polymer/nanodiamond core‐shell materials used for high‐performance liquid chromatography. These particles are prepared by the carbonization/pyrolysis of poly(divinylbenzene) (PDVB) microspheres. Scanning electron microscopy showed that the particles (4.9 µm initially) decreased in size after air oxidation (to 4.4 µm) and again after carbonization (down to 3.5 µm) but remained highly spherical. Brunauer–Emmett–Teller measurements showed low surface areas initially (as received: 1.6 m²/g, after air oxidation: 2.6 m²/g) but high values after carbonization (445 m²/g). Fourier transform infrared spectroscopy revealed the changes in the functional groups after air oxidation (C = O and C–O stretches appear), carbonization (carbon‐oxygen containing moieties disappear), and acid treatment (reintroduction of carbon‐oxygen containing moieties). X‐ray photoelectron spectroscopy (XPS) and elemental analysis revealed the surface and bulk oxygen contents before and after treatments. By XPS, the atom percent oxygen for the as received, air oxidized, carbonized, and acid treated particles are 8.7, 16.6, 3.7, and 13.8, respectively, and by elemental analysis, the percent oxygen in the materials is 0.6, 8.1, 0.9, 16.9, respectively. A principal components analysis of time‐of‐flight secondary ion mass spectrometry data identified ions that were enhanced in the different materials, where almost 90% of the variation in the analyzed peak areas was captured by two principle components. X‐ray diffraction and Raman spectroscopy suggested that the carbonized PDVB was disordered. Thermogravimetric analysis showed significant differences between the differently treated PDVB microspheres. This work applies directly to a commercial product and the process for preparing it. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel synthesis of N‐substituted polyacrylamides: Derivatization of poly(acrylic acid) with amines using a triazine‐based condensing reagent

Poly(acrylic acid) (PAA) was derivatized through the reaction of its pendant carboxylic acid (CO₂H) groups with a wide range of amine‐terminated molecules. These molecules contained alkyl, hydroxyl, sulfonic acid, or perfluoroalkyl groups. N‐substitution of PAA was carried out by the simple addition of 4‐(4,6‐dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium chloride (DMTMM), a triazine‐based condensing reagent, to a mixture of PAA and amine‐terminated molecules. From proton nuclear magnetic resonance and infrared spectroscopy, it was confirmed that these functional molecules were introduced into the PAA side chain via amide bonds. By the alteration of the synthetic conditions, functional side‐chain contents of greater than 95% were achieved for aqueous reactions with taurine, ethanol amine, and butyl amine. Side‐chain conversion was limited to ≤80% for reactions with perfluoroalkyl amines in methanol. Thus, DMTMM is an attractive replacement for carbodiimide condensing reagents such as 1,3‐dicyclohexylcarbodiimide and 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 126–136, 2006     

Microstructured layers of spherical biofunctional core-shell nanoparticles provide enlarged reactive surfaces for protein microarrays

Nanostructured core-shell particles with tailor-made affinity surfaces were used to generate microstructured affinity surfaces by microspotting the particles to form densely packed amorphous nanoparticle layers. These layers provided a large reactive surface for the specific binding of protein ligands from aqueous solution. Biofunctional core-shell particles were synthesized for this purpose that consisted of a silica core with a diameter of 100 nm and an organic shell a few nm thick. The nanoparticle core was prepared by sol-gel chemistry and the shell formed in suspension by organosilane chemistry. The shell provided amino groups or carbonyl groups at its outer surface for subsequent covalent immobilization of streptavidin, rabbit IgG antibodies or goat IgG antibodies. AlexaFluor 647-conjugated and biotinylated cytochrome C and CyDye-labeled anti-rabbit IgG and anti-goat IgG were probed as model analytes. The core-shell nanoparticles were spotted using a pin-ring micro-arrayer onto microscope glass slides that were coated with a polycation monolayer by dip-coating prior to nanoparticle deposition. Amorphous particle layers of well-defined thicknesses in the range of 100 nm to 2 microm were obtained by printing aqueous particle suspensions containing 5-500 mg/mL (0.5-50 wt%) of silica particles. The specific affinity of the plotted nanoparticulate capture surface was demonstrated by binding Cy3-labeled donkey anti-rabbit IgG and Cy5-labeled mouse anti-goat IgG to immobilized rabbit IgG and goat IgG particles. The signal intensity per spot increased for any given analyte concentration when the amount of particles per spot was augmented. This was attributed to the increasing integration of receptor molecules per surface footprint, which shifted the binding equilibrium towards the formation of the receptor-ligand complex. Additionally, the locally-increased supply of receptor molecules at the nanoparticulate microchip surface resulted in a wide dynamic range of 4 fM-20 nM (covering six orders of magnitude).     

Preparation and characterization of monodisperse superparamagnetic poly(vinyl alcohol) beads by reverse spray suspension crosslinking

A novel protocol for preparing magnetic poly(vinyl alcohol) (PVA) beads by reverse spray suspension crosslinking was reported. The hydrophilic Fe₃O₄ nanoparticles were mixed with PVA, glutaraldehyde, and water to form aqueous phase. Then the aqueous phase was sprayed into vegetable oil by a pressure of nitrogen gas to form water in oil (W/O) suspension. The magnetic PVA beads were obtained in the presence of hydrochloric acid catalyst. It was found that the magnetic PVA beads obtained good properties when the PVA concentration was 10%, and the oil phase temperature was controlled at 40 °C. The mechanical stirring has little impact on the size of magnetic PVA beads in the process of reverse spray suspension crosslinking. The Cibacron Blue (CB) was coupled on the surface of magnetic PVA beads by surface chemical reaction. The morphology, size, and magnetic properties of the magnetic PVA beads were examined by scanning electron microscopy, laser diffraction, and vibrating sample magnetometer, respectively. Compared with the stirring method, it was found that the size of magnetic PVA beads was monodisperse and their saturation magnetization was much higher. Fourier transform infrared and X‐ray photoelectron spectroscopy experimental results proved that CB molecules were covalently immobilized onto the surface of the magnetic PVA beads. Meanwhile, the protein affinity separation experiments demonstrated that the magnetic PVA beads can potentially be used as a carrier for large‐scale protein separation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 203–210, 2008     

Preparation and characterization of biotinylated and enzyme‐immobilized heterobifunctional latex particles as nanobio devices

A novel biotinylated and enzyme‐immobilized nanobio device was prepared with heterobifunctional composite latex particles. Hemispherical poly(glycidyl methacrylate‐co‐divinylbenzene)/polystyrene [P(GMA‐DVB)/PSt] particles with epoxy and hydroxyl groups were prepared by soap‐free seeded emulsion polymerization with P(GMA‐DVB) seed particles. Hydroxyl groups were introduced to PSt chain terminals in the seeded stage by adding 2‐mercaptoethanol as a chain‐transfer agent. To obtain the desired hemispherical structure particles, we studied the effects of the preswelling process, the type and amount of solvents added in the seeded polymerization step, the weight ratio of the secondary monomer (styrene) to the seed particle (M/P), and the type of initiators. Under suitable conditions, heterobifunctional P(GMA‐DVB)/PSt was obtained, which was confirmed by observing the binding of streptavidin–colloidal gold with transmission electron microscopy (TEM). To obtain biotinylated and enzyme‐immobilized particles, 5‐(N‐succinimidyloxycarbonyl)pentyl D‐biotinamide was first reacted with the hydroxyl group on the PSt domain of the particle. Pyruvate kinase (PK) was then directly immobilized to the biotinylated particles through a reaction with the epoxy group in the PGMA domain. The monolayer of PK on the latex particle surface was considered to be formed by covalent binding. The activity of immobilized PK was almost conserved, even after being stored at 4 °C for 48 days. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 562–574, 2005