Photoinduced alignment of polymer liquid crystals containing azobenzene moieties in the side group VII. On He-Ne laser beam irradiation

Photoinduced alignment in a polymer liquid crystal prepared from 6-{1-[4-(2-cyano-4-nitrophenylazo)phenyl]piperazino}hexyl acrylate and 4'-[6-(methacryloyloxy)hexyloxy]-4-cyanobiphenyl was investigated for the first time on irradiation with a polarized He-Ne laser beam at 633 nm. The azobenzene moieties as well as the inert cyanobiphenyl mesogenic units were aligned with the molecular long axis perpendicular to the polarization direction of the irradiation light. Alignment induced on short irradiation was reversible, while that induced under prolonged irradiation was irreversible due to the occurrence of crosslinking which might be caused by photoinduced decomposition of the azobenzene moieties during the photoirradiation process.     

Dynamic mechanical properties of cyclohexane-based glass-forming liquid crystals and a linear side chain polymer analogue

A nematic and a cholesteric liquid crystal, both derived from trans-1,3,5-cyclohexanetri-carboxylic acid, and a linear side chain polymer analogue were characterized in terms of storage (G') and loss (G') moduli as functions of frequency and temperature. It was found that all three model compounds show a shear shinning flow behaviour with zero shear viscosities of the low molar mass systems significantly less than that of the polymer system at the same reduced temperature, T/T^g. With shift factors prescribed by the WLF equation, both the G' and G' data of all three compounds are adequately represented by master curves. Furthermore, within the framework of the stretched exponential model, the relaxation behaviours of the low molar mass systems are well described by a single Maxwell element, whereas the polymer system shows a relatively broad distribution of relaxation times. The observed viscoelastic properties suggest a relative ease of material processing of the low molar mass systems compared to the polymer analogue due to a lower zero shear viscosity and a single relaxation time characterizing the dynamics of response to a mechanical or thermal stimulus.     

Charge carrier transport in heterogeneous conducting polymer materials

The similarities of conductivity mechanisms of composites and nanocomposites and doped conjugated polymers that are also characteristic of specific heterogeneity are discussed. It is shown that the formulae developed to account for internal heterogeneity of conductive polymers can be applied also for polymer composites in spite of low overall content of the conductive phase. For fully organic nanocomposites (reticulate doped polymers) showing metal-like conductivity and a crossover temperature effective contribution of metallic phase is estimated. Examples of different properties of nanoparticles forming conducting networks as compared with the bulk crystals are discussed.     

Photo-dimerization of a chalcone-based side chain polymer for the alignment of ferroelectric liquid crystals

The alignment and optical properties of ferroelectric liquid crystal cells, having alignment films of a chalcone-based side chain polymer treated by linearly polarized UV irradiation were investigated. The long absorption band of the UV/Vis spectra gradually decreased and the FTIR spectra shifted as the irradiation times increased, indicating that cyclo-addition and isomerization reactions of the chalcone-based side chains occurred. UV dichroism demonstrated anisotropic changes in the alignment films, with a maximum at low exposure energy (0.5 J cm^-2). Liquid crystal molecules were aligned perpendicular to the polarization direction of the linearly polarized UV radiation. The azimuthal anchoring energy of liquid crystal E7 on a chalcone-based side chain polymer surface increased with exposure energy. Well aligned defect-free cells and high contrast ratio were achieved with irradiation of longer than 5 min; the geometric conditions for a stable C2 structure may be satisfied at low temperature with slowly cooling.     

A novel mesogen‐jacketed liquid crystalline electroluminescent polymer with both thiophene and oxadiazole in conjugated side chain

Mesogen‐jacketed liquid crystalline polymers (MJLCPs) with both electron‐transport oxadiazole and hole‐transport thiophene in the side chain were reported for their promising electroluminescent property. Monomers of 2,5‐bis{5‐[(4‐alkoxyphenyl)‐1,3,4‐oxadiazole]thiophen‐2‐yl}styrene (M‐Cm, m is the number of the carbons in the alkoxy groups, m = 8,10) were synthesized and confirmed by ¹H‐NMR, mass spectrometry, and elemental analysis. The corresponding polymers were successfully obtained and characterized by thermal analysis, optical spectroscopy, cyclic voltammetry, electroluminescent analysis, polarized light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD). The polymers exhibited high decomposition temperatures reaching 382 °C and high T_g's reaching 184 °C. The absorption spectra indicated that both the monomers and polymers had little aggregation in film than that in solution, and the absorption spectra of the polymers showed an obvious blue‐shift compared with those of the monomers. Both the monomers and the polymers had blue‐green emission, and the photoluminescence spectra of the polymers in film suggested the formation of excimer or exciplex. The polymers showed lower HOMO energy levels and LUMO energy levels than those of the MJLCPs containing oxadiazole unit reported before. Electroluminescence study with the device configuration of ITO/PEDOT/PVK/polymer/TPBI/Ca/Ag showed maximum brightness and current efficiency of 541 cd/m² and 0.10 cd/A, which proved that the introduction of directly connected electron‐ and hole‐transport units could greatly improve the EL property of side‐chain conjugated polymers. The phase structures of the polymers were confirmed to be smectic A phase through the results of PLM and WAXD. The annealed samples emitted polarized photoluminescence at room temperature, which indicated potential utility for practical applications in display. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1502–1515, 2010     

Synthesis and properties of polyurethanes bearing urethane moieties in the side chain

Polyurethanes bearing urethane groups in the side chains were prepared by the addition of isocyanates to the hydroxyl groups in poly(hydroxyurethane) prepared by the polyaddition of a bifunctional cyclic carbonate with 1,12‐diaminododecane. The urethanization proceeded quantitatively in the presence of a catalytic amount of di‐n‐butyltin dilaurate. The resulting polyurethane had a higher glass transition temperature than the original poly(hydroxyurethane), although its esterified product had a lower glass transition temperature. The urethanization with 3‐(triethoxysilyl)propyl isocyanate also proceeded effectively to afford both soluble and insoluble polymers, depending on the reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3408–3414, 2007     

Synthesis of novel aromatic polyimides containing bulky side chain for vertical alignment liquid crystals

In this study, a novel 4-（4-octyloxybenzoyloxy）biphenyl-3′,5′-diaminobenzoate and polyimides based on it were synthesized. The polyimide with mesogenic unit side chain exhibited excellent vertical alignment for nematic liquid crystal （LC）. The pretilt angles of LCs above 89° were kept after the rubbing process with 220 mm rubbing strength. The polyimide films as the alignment layer were baked at 120℃ for 12 h, the vertical alignment of LCs was still uniform and stable. Meanwhile, the UV-vis spectra of the noyel polyimide films showed the high transparency in a visible wave length.     

Charge transport properties in discotic liquid crystals: a quantum-chemical insight into structure-property relationships

We describe at the quantum-chemical level the main parameters that control charge transport at the molecular scale in discotic liquid crystals. The focus is on stacks made of triphenylene, hexaazatriphenylene, hexaazatrinaphthylene, and hexabenzocoronene molecules and derivatives thereof. It is found that a subtle interplay between the chemical structure of the molecules and their relative positions within the stacks determines the charge transport properties; the molecular features required to promote high charge mobilities in discotic materials are established on the basis of the calculated structure-property relationships. We predict a significant increase in the charge mobility when going from triphenylene to hexaazatrinaphthylene; this finding has been confirmed by measurements carried out with the pulse-radiolysis time-resolved microwave conductivity technique.     

Synthesis and chiroptical properties of optically active polymer liquid crystals containing azobenzene chromophores

A series of optically active methacrylic homopolymers, poly[(4‐{4′‐[(S)‐2‐methyl‐1‐butyloxycarbonyl]phenylazo}phenoxyl)x‐methylene methacrylate] (x = 0, 2, 6, or 11), were synthesized. The structures of the polymers were characterized by IR, ¹H NMR, UV, differential scanning calorimetry, and gel permeation chromatography. The chiroptical properties of the polymers in films were investigated with circular dichroism (CD) measurements. The CD and UV spectra of the films suggested that CD absorptions occurred in the films of the polymers with long spacers (x = 6 or 11) but not in the films of the polymers with short spacers (x = 0 or 2). After irradiation with linearly polarized light at 442 nm, the CD values were amplified in all the polymeric films. The amplificatory values of the CD bands in the absorption region (260–360 nm) of azobenzene chromophores suggested that the spacer length had an effect on both the transfer of chirality and photoinduced chirality in the polymeric films. The largest level of photoinduced chirality was induced in the polymer containing six methylene units. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3210–3219, 2006     

Ion transport in polymerized lyotropic liquid crystals containing ionic liquid

In this work, we investigate the effect of morphology and segmental dynamics on ion transport in polymerized lyotropic liquid crystals (polyLLCs) containing 1-butyl-3-methylimidazolium tetrafluoroborate as ionic liquid (IL). We demonstrate that two important factors, which affect ion conduction in polyLLCs, are grain size and chain density at the interface. The polyLLC with large grain size (70 nm) shows significant reduction in ion conductivity (one order of magnitude) compared to its homopolymer/IL mixture. However, the polyLLC with small grain size (20 nm) has little difference in ion conductivity compared to its homopolymer/IL mixture. It is observed that decreasing the chain density enhances the interaction of IL with polymer chains and consequently slows the relaxation of polymer chains. In addition, comparing the dynamics of polymer chains in mixtures of homopolymer/IL and templated LLC mesophases shows that the confinement in LLC structure prolongs the relaxation of polymer chains.     

Synthesis and properties of side chain liquid crystalline ionomers containing quaternary ammonium salt groups

New thermotropic side chain liquid crystalline ionomers (LCIs), containing 4-(4-allyloxybenzyloxy)-4'-alkoxybiphenyl (IM) as mesogenic unit and allyltriethylammonium bromide (ATAB) as non-mesogenic unit, were synthesized by graft copolymerization upon polymethylhydrosiloxane. The chemical structures of the polymers were confirmed by IR spectroscopy. Differential scanning calorimetry (DSC) was used to measure the thermal properties of these polymers; the mesogenic properties were characterized by polarizing optical micrography, DSC and X-ray diffraction. The influence of the alkoxy chain length on the clearing temperatures of the ionomers is clearly shown in an odd-even effect, similar to other side chain liquid crystal polymers. The mesomorphic behaviour of the ionomers is compared with that of isomeric ionomers synthesized in previous work. The results demonstrate that the phase behaviour of the two series of isomeric ionomers is similar, but with the difference that the melting temperature of ionomers with biphenyl located at the end of the mesogen is higher than for ionomers with biphenyl located at the middle of the mesogen. The latter are more useful for smectic orientational order than the former.     

Synthesis of chalcone‐containing methacrylate‐based hydrogen bonded side chain liquid crystalline polymer and its dielectric properties

In this work, a new methacrylate‐based hydrogen bonded side chain liquid crystalline polymer having chalcone moieties (HBCP) was prepared from poly(4‐(3‐(pyridin‐4‐yl)acryloyl) phenyl methacrylate) and 11‐(4‐cyanobiphenyl‐4(‐oxy) undekan‐1‐ol (LC11)) by molecular self‐assembly processes via hydrogen bond formation between nitrogen of the HBCP and hydroxyl group of the LC11. The formation of H bond was confirmed by using Fourier transform infrared (FTIR) spectroscopy. The phase transition temperatures and liquid crystalline phases of the HBCP were examined by DSC and POM measurements. The dielectric properties of HBCP have been determined by impedance analyzer within the frequency interval of 100 Hz–15 MHz. According to Cole–Cole plot, the equivalent circuit of the LC system has been found as a capacitor in parallel with a resistor. The resonance frequency, f_r, of the R–C circuit has also been calculated as 1.59 MHz by phase angle versus frequency curve. The dielectric relaxation type of HBCP has been determined as nearly‐Debye type because the absorption coefficient, α, equals to 0.01655. From the conductivity point of view, HBCP displays dc conductivity at the low and high frequency regions that correspond to 100 Hz–12 kHz and 3.3 MHz–15 MHz, respectively. On the other hand, it has been revealed that the ac conductivity of the LC system investigated obeys Super Linear Power Law (SLPL) at the intermediate frequency domain. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and electroluminescent studies of blue‐emitting copolymers containing phenylene vinylene and oxadiazole moieties in the main chain

Two statistical copolymers III and IV combining features of the two reference polymers I and II were synthesized by a Wittig reaction with the objective of raising the electron‐transport properties and fluorescence quantum yields relative to the alternating block copolymers I and II . The electroluminescent properties of single‐layer LEDs using these copolymers were studied. External quantum efficiencies of 0.035 and 0.11% were obtained from single‐layer devices on the basis of III and IV , respectively, which are higher than those of similar devices using I and II . Two single‐layer LEDs using a blend of I and II (4:1 and 1:1 wt/wt) corresponding to the compositions of copolymers III and IV , respectively, were also fabricated for comparison. Results indicated that the covalent incorporation of oxadiazole is effective in improving the efficiency of LEDs and that the molar content of oxadiazole plays an important role in the performance of the devices. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 235–241, 2002     

On the explanation of the biphotonic processes in polyesters containing azobenzene moieties in the side chain

An explanation for the recently observed biphotonic transitions in side-chain polyesters with azobenzene moieties is given on the basis of experimental observations from optical and Fourier-Transform infrared absorption spectra. We present for the first time experimental evidence that a red laser beam at 633 nm causes cis-trans (Z—E) transitions in azobenzene.     

Charge transport properties in carbon black/polymer composites

The charge transport properties of polymer matrix–carbon black composites are investigated in this study. Direct current conductivity is examined with varying parameters: the temperature and the conductive filler content. Conductivity data are analyzed by means of percolation theory, and both percolation threshold and critical exponent are determined at each of the examined temperatures. The temperature dependence of conductivity and the agreement of experimental results with the variable range hopping model reveal hopping conduction as the predominant transport mechanism, below and in the vicinity of the critical concentration of carbon black particles. At higher concentrations, the contribution of hopping transport to the overall conductivity is reduced and a balance between hopping and conduction via geometrical contact occurs. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2535–2545, 2007     

Synthesis and characterisation of polymethacrylates containing para-, meta- and ortho-monosubstituted azobenzene moieties in the side chain

Three sets of novel side-chain liquid crystalline polymers with monosubstituted azobenzene moieties in the side-chain have been studied. These are poly(p-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PPHABM), poly(m-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PMHABM) and poly(o-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (POHABM). The chemical structure of the monomers was confirmed by ¹H NMR, ¹³C NMR spectroscopy and elemental analysis. The structural characterisation of the polymers was performed by ¹H NMR spectroscopy and gel permeation chromatography, and their phase behaviour and liquid crystalline properties were studied using differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. The results show that the transitional behaviour of side-chain liquid crystalline polymers containing monosubstituted azobenzene moieties depends strongly on the position of the substituent on the azobenzene moiety; for example, the ortho-monosubstituted polymers do not form liquid crystalline phases, but all the para- and meta-monosubstituted polymers exhibit a smectic A phase. Furthermore, the glass transition temperature (T_g ) of the polymers decreases in the order, para > meta > ortho. For the PPHABM and PMHABM polymers the isotropic temperature (T_i ) and liquid crystalline range (ΔT, from T_g to T_i ) are found to be in the order, para > meta, although it is surprising that the associated enthalpy changes in these polymers is the opposite order, meta > para.     

Synthesis and characterization of halogen-containing ferroelectric liquid crystals and side chain liquid crystalline polymers

A new series of ferroelectric liquid crystals and side chain liquid crystalline polymers based on halogen-containing chiral centres has been synthesized. Chemical structures were analysed by NMR. Liquid crystal phases were characterized by differential scanning calorimetry, optical polarizing microscopy, and X-ray diffractometry. The behaviour of the liquid crystalline phases was investigated as a function of spacer units and differing terminal asymmetric moieties. It was found that phase transition temperatures decreased with increasing length of the oligooxyethylene spacer unit. Differing terminal asymmetric moieties led to differing mesophase phenomena. Furthermore, a wide temperature range (including room temperature) of a chiral smectic C phase was achieved.     

Synthesis and characterization of halogen-containing ferroelectric liquid crystals and side chain liquid crystalline polymers

A new series of ferroelectric liquid crystals and side chain liquid crystalline polymers based on halogen-containing chiral centres has been synthesized. Chemical structures were analysed by NMR. Liquid crystal phases were characterized by differential scanning calorimetry, optical polarizing microscopy, and X-ray diffractometry. The behaviour of the liquid crystalline phases was investigated as a function of spacer units and differing terminal asymmetric moieties. It was found that phase transition temperatures decreased with increasing length of the oligooxyethylene spacer unit. Differing terminal asymmetric moieties led to differing mesophase phenomena. Furthermore, a wide temperature range (including room temperature) of a chiral smectic C phase was achieved.     

Synthesis of a side chain liquid crystalline polymer containing the cholesteryl moiety via ROP and “click” chemistry

Propargyl monocholesterylsuccinate (ChPS) was prepared through the esterification of monocholesterylsuccinate with propargyl alcohol, and poly(3-azidomethyl-3-methyloxetane) (PAMMO) was synthesized via cationic polymerization, using boron trifluoride etherate as catalyst and benzyl alcohol as initiator in methylene chloride. Through the copper-catalyzed “click” reaction between the azide group on PAMMO and the alkyne group on ChPS, a side chain liquid crystalline polymer containing the cholesteryl moiety (Ch-SCLCP) was obtained. The “click” reaction was confirmed by IR, ¹H NMR, ¹³C NMR, and GPC studies. The resulting polymer showed thermotropic mesophase as judged by polarized optical microscopy (POM) and differential scanning calorimetry (DSC).