溶剂对三(苯并咪唑-2-甲基)胺和间苯二胺四乙酸的铜配合物晶体结构的影响

本文利用三(苯并咪唑-2-甲基)胺和间苯二胺四乙酸为配体与硝酸铜在CH3COCH3/CH3OH/H2O混合溶液中反应得到配合物[Cu(ntb)(H2mpda)].0.5CH3COCH3.2H2O(1),在DMF/CH3OH/H2O混合溶液中反应得到配合物[Cu(ntb)(H2mpda)].DMF.CH3OH.2H2O(2)(ntb=三(苯并咪唑-2-甲基)胺,H4mpda=间苯二胺四乙酸)。2个配合物的中心的铜离子分别与1个ntb配体的4个氮原子和1个H2mpda的氧原子配位形成三角双锥的配位构型。受溶剂的影响,配合物中配体的相对位置和构象有较大的区别,配合物2的配位构型更加扭曲。两个配合物均通过氢键连接形成不同的复杂三维网络。     

对乙酰氨基苯甲酸和含氮配体构筑铜、锌配合物的合成、结构及性质研究(英文)

利用对乙酰氨基苯甲酸(HPABA)和邻菲咯啉(phen)、硝酸铜在DMF/CH3OH/H2O溶液中合成了单核铜配合物[Cu(PABA)(phen)(H2O)2]·(NO3)·H2O(1),然后又和4,4′-联吡啶(4,4′-bpy)、硝酸锌在DMF/CH3OH/H2O溶液中获得配位聚合物{[Zn(PABA)2(4,4′-bpy)]·4H2O}n(2)。根据X射线衍射分析结果,配合物1中每个铜离子周围有2个氮原子和3个氧原子与之配位形成畸变的四方锥配位构型,然而在配合物2中,六配位八面体构型的锌离子通过配体4,4′-联吡啶扩展为一维Zigzag型链。分别对这两个配合物的热稳定性和电化学性质进行了研究。     

铜(II)酪氨酸乙酯络合物催化一锅法合成S(-)-1,1-′联萘-2,2′-二酚

利用“一锅法” ,以L 酪氨酸乙酯为原料和铜 (II)反应生成络合物 ,不对称催化氧化偶合 2 萘酚合成S ( -) 1,1′ 联萘 2 ,2′ 二酚 ,选择最佳反应条件 ,可使化学产率达到 67%,光学产率达到 62 %.     

对甲苯磺酸铜的电化学表征

合成了对甲苯磺酸铜,用X光单晶衍射确定了其结构.实验结果表明,该盐容易脱除全部结晶水,在空气中不潮解.分别测定了对甲苯磺酸铜(Cu(p-OTs)2)在H2O、CH3OH和DMF中的电化学参数.实验结果表明Cu(p-OTs)2在不同溶剂中的反应机理各异. Cu(II)的电化学还原在H2O中是分两步进行,而在CH3OH和DMF中的电化学还原是一步两电子过程.对实验结果进行了分析讨论.     

芳香基羧酸根桥联的双核铜(Ⅱ)配合物研究（英文）

以具有芳香基团的3-(9-甲基-芴基)-丙酸(FluCO2H)和N-咔唑基丙酸(CarbCO2H)为配体,合成了5种具有双核铜结构的配合物[Cu2(FluCO2)4(CH3OH)2](1),[Cu2(FluCO2)4(DMF)2](2),[Cu2(FluCO2)4(4,4′-bipy)2]n(3),[Cu2(CarbCO2)4(CH3CN)2](4),[Cu2(CarbCO2)3(2,2′-bipy)2]ClO4(5)。晶体结构测试表明:配合物1,2和4都具有羧酸桥联的车轮状结构单元,其结构单元轴向位置分别由甲醇,二甲基甲酰胺和乙腈分子占据。配合物3中,车轮状双核铜结构单元通过4,4′-联吡啶连接构成一维链。配合物5的双核铜结构单元则是通过三个羧酸桥联形成。     

芳香基羧酸根桥联的双核铜（Ⅱ）配合物研究

以具有芳香基团的3-(9-甲基-芴基)-丙酸(FluCO2H)和N-咔唑基丙酸(CarbCO2H)为配体,合成了5种具有双核铜结构的配合物[Cu2(FluCO2)4(CH3OH)2](1),[Cu2(FluCO2)4(DMF)2](2),[Cu2(FluCO2)4(4,4′-bipy)2]n(3),[Cu2(CarbCO2)4(CH3CN)2](4),[Cu2(CarbCO2)3(2,2′-bipy)2]ClO4(5)。晶体结构测试表明:配合物1,2和4都具有羧酸桥联的车轮状结构单元,其结构单元轴向位置分别由甲醇,二甲基甲酰胺和乙腈分子占据。配合物3中,车轮状双核铜结构单元通过4,4′-联吡啶连接构成一维链。配合物5的双核铜结构单元则是通过三个羧酸桥联形成。     

系统研究溶剂和温度对形成三种钴簇基金属-有机框架化合物的影响：结构和气体吸附性质

通过调控DMSO/DMF/H2O混合溶剂中溶剂成分的物质的量比和反应温度,合成出3种基于1,3,5-三(4′-羧甲基苯基)苯(H3BTB)和氯化钴的钴簇基金属-有机框架化合物(NH2Me2)2[Co3O(BTB)2(H2O)].2H2O.4.5DMF.7.5DMSO(1),(NH2Me2)2[Co4O(BTB)8/3].6H2O.13DMSO(2)和(NH2Me2)2[Co6O3(BTB)8/3(H2O)4].5H2O.5DMF.13DMSO(3),它们分别含有三核Co3O簇、四核Co4O簇和六核Co6O3簇。这种六核簇为我们首次发现。研究表明,相对中等的温度105℃和较多DMF的使用有利于三核簇的形成;125℃高温和溶剂DMSO有利于四核簇的构建;与形成1的条件相比,较低的温度95℃和更多水的存在则有利于六核簇的生成。2和3虽然由不同的金属簇构成,但具有相同的框架结构,Schlfli符号为(43)8(48.64.812.104)3。此外,还研究了2和3抽出溶剂后产物的气体吸附性质,它们均具有较高的氢气吸附焓。     

N-苯胺叉二乙酸根与4，4′-联吡啶构筑的一维梯状铜(Ⅱ)配位聚合物的合成、结构与磁性

以Cu(ClO4)2,H2L(N-苯胺叉二乙酸)和4,4′-bpy(4,4′-联吡啶)为原料,采用溶剂挥发的方法得到了1个新的一维梯状配位聚合物{[Cu2L2(H2O)(4,4′-bpy)].DMF.3H2O}n(1)。通过元素分析、红外光谱、热重分析和单晶X-射线衍射法对其组成和结构进行了表征。在配合物1中,每个N-苯胺叉二乙酸根离子(L2-)分别桥联2个铜(Ⅱ)离子形成一维锯齿形链状结构,一维链通过4,4′-联吡啶(4,4′-bpy)的2个氮原子连接形成一维梯状结构。配合物1的变温磁化率实验测试结果表明在相邻的铜离子间存在弱的反铁磁相互作用。     

钴（Ⅱ）和铜（Ⅱ）膦酸配位聚合物的热、磁性能

3-氨基-1-羟基丙叉-1,1-二膦酸与钴或铜离子的水热反应得到新的配聚物Co2(NH3CH2CH2C(OH)(PO3)(PO3H))2·2H2O (1) 和Cu3{[NH3CH2CH2C(OH)(PO3)2](H2O)2} (2).研究了两个配合物的热稳定性,采用变温磁化率研究了在5-300 K范围内的磁性能. 结果表明:在配合物1中,钴离子间存在着弱的反铁磁偶合作用,理论拟合值为J=-2.1 cm-1,g=2.18;配合物2中,铜离子间的磁作用较复杂.     

基于1,1’-二苯乙炔-3,3’,5,5’-四羧酸微孔铜配位聚合物的合成和气体吸附性质

本文报道了配合物[Cu2(EBTC)(H2O)2]·8H2O·DMF.DMSO(1,EBTC=1,1′-二苯乙炔-3,3′,5,5′-四羧酸根;DMF=N,N-二甲基甲酰胺;DMSO=二甲基亚砜)的合成、晶体结构和吸附性质。1拥有内径为0.85 nm和0.85 nm×2.15 nm的两种孔洞,分别被6个和12个四羧酸根桥联的[Cu2(CO2)4]螺旋桨式结构围绕,并被EBTC连接成三维超分子结构,该结构拥有可容纳溶剂分子的一维孔道。1为(3,4)-连接的fof(sqc1575)拓扑结构,具有非常大的孔体积,其值高达单位晶胞体积的72.8%。去除溶剂分子后的1a表现出永久孔性,其Langmuir表面积为2844 m2·g-1,BET表面积为1 852 m2·g-1。它对H2、CO2、CH4和C2H2具有可观的气体吸附量和相对较高的吸附焓。特别是,在迄今所有已报道的孔性金属-有机材料中,1a在273 K、1.0×105Pa下,表现出最高的乙炔吸附量(252 cm3·g-1)和很高的吸附焓(吸附量为1 mmol·g-1时的吸附焓为34.5 kJ·mol-1)。     

Self-assembly of unprecedented [8+12] Cu-metallamacrocycle-based 3D metal-organic frameworks

[8+12]-metallamacrocycle-based 3D frameworks {[Cu(4)(pbt)(2)(SO(4))(2)(DMF)(2)(CH(3)OH)]·7H(2)O·DMF}(n) (1) and [12]-macrocycle 3D {[Cu(2)(pbt)(SO(4))(DMSO)(CH(3)OH)(2)]·5H(2)O·CH(3)OH}(n) (2) have been obtained. Both complexes display antiferromagnetic couplings and high catalytic activity in the oxidative coupling reaction of 1-ethynylbenzene and oxazolidin-2-one.     

Aerobic oxidation of substituted phenols catalysed by metal acetylacetonates in the presence of 3-methylbutanal

The aerobic oxidation of substituted phenols with the catalytic system M(acac)_n/3-methylbutanal/O₂ has been investigated. Co(acac)₂ and Mn(acac)₃ promoted the transformation of 2,6-dimethylphenol and 2,6-di-t-butylphenol into their corresponding diphenoquinones and benzoquinones. In the oxidation of 2,3,6-trimethylphenol, the same catalysts yielded 32–34% of the relevant biphenol. Cu(acac)₂ converted 2-naphthol into 1,1′-bi-2-naphthol with 84% yield. Supported Co(II) and Cu(II) complexes have also been used as heterogeneous catalysts for the oxidation of 2,6-di-t-butylphenol and 2-naphthol, respectively.     

A simple,convenient preparation for enantiomerically pure 1,1′-bi-2-naphthols

A new preparative method for enantiomerically pure 1,1′-bi-2-naphthols is described. 1,1′-Bi-2-naphtholboric anhydride generated from the reaction of racemic 1,1′-bi-2-naphthol and boric acid in toluene is reacted with (S)-proline to produce 1,1′-bi-2-naphtholboric proline anhydride. Its two diastereomers were efficiently separated in THF. After treating successively with NaOH, HCl, and recrystallizing from benzene, enantiomerically pure (S)- and (R)-1,1′-bi-2-naphthol were obtained in 71–79% yield and in 62–74% yield, respectively.     

New phenoxido-bridged quasi-tetrahedral and rhomboidal [Cu4] compounds bearing μ4-oxido or μ(1,1)-azido ligands: synthesis, chemical reactivity, and magnetic studies

[Cu(2)(μ(4)-O)Cu(2)] and [Cu(2)(μ(1,1)-N(3))(4)Cu(2)] geometrical arrangements are found in a new family of tetranuclear copper(II) complexes: [Cu(4)(μ(4)-O)(μ-cip)(2)Cl(4)] (1), [Cu(4)(μ(4)-O)(μ-cip)(2)(μ(1,3)-O(2)CPh)(4)]·2CH(3)OH (2·2CH(3)OH), and [Cu(4)(μ(1,1)-N(3))(4)(μ-cip)(2)(N(3))(2)]·DMF (3·DMF) [Hcip = 2,6-bis(cyclohexyliminomethylene)-4-methylphenol; CH(3)OH = methanol; DMF = dimethylformamide]. These complexes have been characterized by X-ray crystallography, and their magnetic properties have been studied. 1 and 2 form quasi-tetrahedral [Cu(4)(μ(4)-O)] complexes, and 3 is the first example of a rhomboidal [Cu(4)(μ(1,1)-N(3))] compound. Formation of the [Cu(4)] compounds is achieved via ligand-exchange reactions. The relative binding strength of the three ancillary ligands as N(3)(-) > PhCO(2)(-) > Cl(-) has been demonstrated from the core-conversion and peripheral ligand-exchange reactions. For the three complexes, the magnetic susceptibility measurements in the range of 1.8-300 K have been performed and modeled using two isolated S = (1)/(2) dimers based on the spin Hamiltonian H = -2J{S(Cu,1)·S(Cu,2)} with J/k(B) = -513, -340, and -315 K for 1-3, respectively (where J is the exchange constant through the oxido-phenoxido and azido-phenoxido bridges, respectively).     

Di-2-pyridyl ketone oxime in copper chemistry: di-, tri-, penta- and hexanuclear complexes

The use of di-2-pyridyl ketone oxime (Hpko)/X- "blends" (X- = OH-, Cl-, ClO4-) in copper chemistry has yielded neutral binuclear and cationic trinuclear, pentanuclear or hexanuclear complexes. Various synthetic procedures have led to the synthesis of compounds [Cu5(pko)7].[ClO4]3.2CH3OH.2H2O (1), [Cu3(pko)3(OH)(Cl)]2[Ph4B]2.4DMF.2H2O (2), [Cu2(pko)4] (3), {[Cu6(pko)6ClO4(CH3CN)6][Cu6(pko)6(ClO4)3(CH3CN)4]}.8ClO4.14CH3CN.H2O (4). The structures of the complexes have been determined by single-crystal X-ray crystallography.     

二氯·菲咯啉二酮混配金属锰(Ⅱ)、铁(Ⅱ)、钴(Ⅱ)配合物的合成与性质

以MCl2和配体L(L=1,10 菲咯啉 5,6 二酮)为原料,合成了标题配合物MLCl2,M=Mn(Ⅱ)、Fe(Ⅱ)、Co(Ⅱ),并经元素分析、电子吸收光谱、红外光谱表征.三者均为四配位的电中性配合物,热稳定性高于500K,易溶于DMF、DMSO和吡啶,可溶于二氯乙烷、乙醇和水.它们在DMSO、DMF中于350nm和310nm附近显示出强的M→L荷移跃迁.     

An economic,practical access to enantiopure 1,1′-bi-2-naphthols: enantioselective complexation of threo-(1S,2S)-N-benzyl-N,N-dimethyl[1,3-dihydroxy-1-(4′-nitrophenyl)]-2-propylammonium chloride

An economic, convenient access to enantiopure (R)- and (S)-1,1′-bi-2-naphthol (BINOL) has been discovered. Racemic 1,1′-bi-2-naphthol was reacted with threo-(1S,2S)-N-benzyl-N,N-dimethyl-[1,3-dihydroxyl-1-(4′-nitrophenyl)]-2-propylammonium chloride (BDDNPAC) in water-containing acetonitrile under reflux until the solid dissolved completely, and then cooled to ambient temperature to isolate a yellow-greenish crystal consisting of BDDNPAC, (S)-BINOL, and water, which was analyzed by single crystal X-ray structural analysis. Enantiopure (S)- and (R)-1,1′-bi-2-naphthols were obtained in high yield after decomposition of the colored crystalline complex and evaporation of the acetonitrile solution removed from the complex crystals and successive crystallization. The chiral quaternary ammonium salt BDDNPAC can be recovered and reused without any decrease in efficiency.     

Heterodimetallic compounds assembled from ferrocenedicarboxylato and ferrocenecarboxylato ligands

Heteropolynuclear organometallic compounds have been constructed by using two kinds of ferrocene-based ligands, 1,1'-ferrocenedicarboxylic acid (H(2)L(1)) and ferrocenecarboxylic acid (HL(2)). Reactions the ligand H(2)L(1) with copper(II) and nickel(II) salts, in the presence of pyridine, give a tetranuclear Cu(2)Fe(2) mixed-metallic box Cu(2)L(1)(2)(Py)(2)(DMF)(2)(H(2)O)(2) (1) and a tetranuclear heterobimetallic helix Ni(2)L(1)(2)(Py)(4)(H(2)O) (2), respectively. In these complexes, the ferrocene moieties show cisoid conformations which lead to the formation of the finite coordination geometry, i.e. to molecular complexes. Interactions of the ligand H(2)L(1) with lanthanide ions afford two-dimensional networks [La(2)L(1)(3)(CH(3)OH)(4)]( infinity ) (3), [Eu(2)L(1)(3)(H(2)O)(5)]( infinity ) (4), and [Gd(2)L(1)(3)(CH(3)OH)(2)(H(2)O)(3)]( infinity ) (5), respectively, in which transoid conformations of the ferrocene moiety provide opportunities to form infinite 2-D networks. It is suggested that the conformational freedom of the ferrocene moiety makes the ligand L(1) display different conformations and coordination modes in these complexes. In addition, the pi.pi interactions related to the ferrocene moieties were also found to stabilize the supramolecular architectures in the solid state. As a comparison, reaction of lanthanide ions with the ligand HL(2) resulted in three isostructural heterodinuclear windmill-shaped compounds Ln(2)L(2)(6)(CH(3)OH)(2)(H(2)O)(5) [Ln = La (6), Eu (7), and Gd (8)] by simply diffusing the solutions of lanthanide ions into the mixture of HL(2) and NaOH, respectively. Electrochemical properties of the ferrocene-containing complexes 1-8 are also investigated in the solution or solid state.     

A Facile Procedure for the oxidative Coupling of 2-Naphthol and 2-Naphthalenethiol in Solid State

l,lLBi-2-naPhtholshavebeenwidelyappliedasimportantchiralauxiliariesandligands..tinorganicchemistry'.TheconversionofthiolstothecorrespondingdisulphidesisofintCrestbothfromabiological'andpracticalpointofview.ForthesynthesisofbinaPhtholsanddisulphides,theoxidativecouplingofnaphtholsandthiolshaslongbeenarecognisedmethodofchoice.Variousoxidantscanbringaboutthecouplingofnaphthols'andthiols4insolution,buttheyoftenleadtolowyieldsorsufferfromdisadvantagesduetotheinsolubilityofoxidant,naPhthoIandthiol…