Circulatory bubble dynamics: From physical to biological aspects

Bubbles can form in the body during or after decompression from pressure exposures such as those undergone by scuba divers, astronauts, caisson and tunnel workers. Bubble growth and detachment physics then becomes significant in predicting and controlling the probability of these bubbles causing mechanical problems by blocking vessels, displacing tissues, or inducing an inflammatory cascade if they persist for too long in the body before being dissolved. By contrast to decompression induced bubbles whose site of initial formation and exact composition are debated, there are other instances of bubbles in the bloodstream which are well-defined. Gas emboli unwillingly introduced during surgical procedures and ultrasound microbubbles injected for use as contrast or drug delivery agents are therefore also discussed. After presenting the different ways that bubbles can end up in the human bloodstream, the general mathematical formalism related to the physics of bubble growth and detachment from decompression is reviewed. Bubble behavior in the bloodstream is then discussed, including bubble dissolution in blood, bubble rheology and biological interactions for the different cases of bubble and blood composition considered.     

2003年匹茨堡分析化学暨应用光谱学会议简介

2003年匹茨堡会议于3月9日～14日在美国Orlando市召开,主题是:“将科学的因子聚在一起”,提交本届大会论文超过2200篇,故只能摘要介绍如下。大会报告由Cornell大学FredW.McLafferty教授担任,题目是:生化医学革命的分析挑战“,它点出了大会6天学术活动的重点。特邀报告由200     

An introduction to molecular spintronics

We review the progress and future possibilities in the emerging area of molecular spintronics. We first provide an overview of the different transport regimes in which electronic nanodevices can operate, then briefly overview the important characteristics of molecular magnetic materials that can be useful for application in spintronics and we eventually present several schemes to include such systems into spintronic nanodevices. We hightlight the importance of a chemical approach to the area, and in the last section we showcase some approaches to the creation of hybrids made of carbon nanostructures and molecular magnets, which are gaining increasing attention.     

An introduction to quadrupole-time-of-flight mass spectrometry

A brief introduction is presented to the basic principles and application of a quadrupole-time-of-flight (TOF) tandem mass spectrometer. The main features of reflecting TOF instruments with orthogonal injection of ions are discussed. Their operation and performance are compared with those of triple quadrupoles with electrospray ionization and matrix-assisted laser desorption/ionization (MALDI) TOF mass spectrometers. Examples and recommendations are provided for all major operational modes: mass spectrometry (MS) and tandem MS (MS/MS), precursor ion scans and studies of non-covalent complexes. Basic algorithms for liquid chromatography/MS/MS automation are discussed and illustrated by two applications.     

An introduction to electrochemical DNA biosensors

Electrochemical DNA biosensors exploit the affinity of single-stranded DNA for complementary strands of DNA and are used in the detection of specific sequences of DNA with a view towards developing portable analytical devices. Great progress has been made in this field but there are still numerous challenges to overcome. This review for researchers new to the field describes the components of electrochemical DNA biosensors and the important issues in their design. Methods of transducing DNA binding events are discussed along with future directions for DNA biosensors.     

The dynamics of a bubble ensemble in a cavitation field

A system of equations was obtained to describe the dynamics of bubbles in a cavitation cloud taking into account the interaction of pulsating bubbles involved in translational motion. The kinetics of cavitation bubble concentration changes, changes in the compressibility of the liquid, and phase transitions within a cavitation bubble and in the neighboring volume of the liquid were taken into account. The role played by bubble deformation in a cavitation cloud was considered. The Bernoulli pressure effect was shown to be negligible. The interaction of cavitation bubbles was a substantial factor that strongly influenced the dynamics of bubbles. It was suggested that there was at least one more mechanism that reduced sonoluminescence intensity from the multiple-bubble cavitation field, namely, a fairly high efficiency of sonoluminescence quenching could additionally be related to the arrival of a cumulative liquid stream at the central cavitation bubble region, where the concentration of active species was high. The dynamics of bubbles in the cavitation field is not only related to the expansion and compression of cavitation bubbles in the acoustic field, but also governed to a great extent by their interaction, translational motion, deformation, and the influence of cumulative streams penetrating the bubbles.     

An introduction to inductively coupled plasma source mass spectrometry

Inductively coupled plasma (ICP) source mass spectrometry is a revolutionary new method of analysis, combining the speed and convenience of sample introduction into the ICP with the high sensitivity and isotope ratio capability of atomic mass spectrometry.     

Understanding organofluorine chemistry. An introduction to the C-F bond

Fluorine is the most electronegative element in the periodic table. When bound to carbon it forms the strongest bonds in organic chemistry and this makes fluorine substitution attractive for the development of pharmaceuticals and a wide range of speciality materials. Although highly polarised, the C-F bond gains stability from the resultant electrostatic attraction between the polarised C delta+ and F delta- atoms. This polarity suppresses lone pair donation from fluorine and in general fluorine is a weak coordinator. However, the C-F bond has interesting properties which can be understood either in terms of electrostatic/dipole interactions or by considering stereoelectronic interactions with neighbouring bonds or lone pairs. In this tutorial review these fundamental aspects of the C-F bond are explored to rationalise the geometry, conformation and reactivity of individual organofluorine compounds.     

Complex scaling: An introduction

The complex scaling method, also known as the complex coordinate or dilatation transformation method, is discussed in relation to the Stark effect and to the calculation of the position and width of resonant states of atoms or molecules. The significance of resonant scattering in atomic physics is briefly reviewed.     

An active bubble trap and debubbler for microfluidic systems

We present a novel, fully integrated microfluidic bubble trap and debubbler. The 2-layer structure, based on a PDMS valve design, utilizes a featured membrane to stop bubble progression through the device. A pneumatic chamber directly above the trap is evacuated, and the bubble is pulled out through the gas-permeable PDMS membrane. Normal device operation, including continuous flow at atmospheric pressure, is maintained during the entire trapping and debubbling process. We present a range of trap sizes, from 2 to 10 mm diameter, and can trap and remove bubbles up to 25 muL in under 3 h.     

Numerical simulation of bubble dynamics in a micro-channel under a nonuniform electric field

A numerical method is used to simulate the motion and coalescence of air bubbles in a micro-channel under a nonuniform electric field. The channel is equipped with arrays of electrodes embedded in its wall and voltages are applied on the electrodes to generate a specified electric field gradient in the longitudinal direction. In the study, the Navier-Stokes equations are solved by using the level set method handling the deformable/moving interfaces between the bubbles and the ambient liquid. Both the polarization Coulomb force and the dielectrophoresis force are considered as the force source of the Navier-Stokes equations by solving the Maxwell's equations. The flow field equations and the electric field equations are coupled and solved by using the finite element method. The electric field characteristics and the dynamic behavior of a bubble are analyzed by studying the distributions of the electric field and the force, the deformation and the moving velocity of the air bubble. The result suggests that the model of dispersed drops suspended in the immiscible dielectric liquid and driven by a nonuniform electric field is an effective method for the transportation and coalescence of micro-drops.     

An introduction to bismuth film electrode for use in cathodic electrochemical detection

A new electrode surface design, the bismuth film electrode (BiFE), is presented as a promising alternative to mercury and other solid electrodes for direct cathodic electrochemical detection of organic compounds. The preparation of the BiFE, involving an ex situ electroplating of metallic bismuth onto a glassy carbon (GC) substrate electrode, was optimised. The useful negative potential windows of the BiFE in the pH range 1 (−0.2 to −0.8 V vs Ag/AgCl) to 10 (−0.2 to −1.5 V) were determined. The reproducibility of measuring 2-nitrophenol as a model compound (relative standard deviation, r.s.d., n=10) was found to be 0.5% at the same BiFE, and 1.0% at successive newly prepared BiFEs. No polishing or any other pre-treatment of the substrate GC surface was required prior to re-plating of a new Bi film. The BiFE showed similar or even favourable voltammetric behaviour when compared to mercury and bare GC electrodes, and was successfully tested for amperometric detection under hydrodynamic conditions. The results revealed that BiFE is an attractive new non-mercury metallic electrode particularly suitable for cathodic electrochemical detection in flow analytical systems.     

New horizons in biotechnology—An introduction

Applied Biochemistry and Biotechnology -     

An absolute differential maximum bubble pressure surface tensiometer employing displaced capillaries

A modification of the differential maximum bubble pressure method for determining surface tensions is described. In this method, surface tension is calculated from the difference between maximum bubble pressures reached at capillaries of differing internal radii, vertically displaced by an amount calculated from the theory of Cuny and Wolf (1956) Ann Physik 17:57). The density dependence of the technique is eliminated and surface tension becomes a truly linear function of the differential maximum bubble pressure, which is easily measured. The absolute measuring technique is illustrated for equilibrium and dynamic surface tensions of a series of pure liquids and aqueous solutions.For dynamic measurements on surfactant solutions some important experimental considerations and limitations are described. In particular, a previously unrecognized source of error in estimating bubble surface ages is identified. It was found that the maximum bubble pressure for a large capillary does not immediately precede the detachment of the bubble, but occurs at one-third the overall bubble period. Thus, for large capillaries, subsequent to attaining the maximum bubble pressure, there exists a significant decay time in addition to the dead time. In general, surface ages corresponding to maximum pressure at small and large capillaries bubbling with the same period are not equal. This can lead to a large error in dynamic and equilibrium surface tensions of surfactant solutions. With suitable correction the technique is capable of measuring absolute surface tension, even for quite slowly equilibrating surfactant solutions.     

An introduction to Inelastic Electron Tunneling Spectroscopy (IETS) and its chemical applications

Inelastic Electron Tunnelling Spectroscopy (IETS) provides information concerning the vibrational and excitation modes present in molecular species adsorbed onto an electrically insulating substrate. Our objective is not to cover the entire literature to date. Rather we hope to stimulate an interest in IETS among chemists by outlining some of the systems of chemical interest already studied; and to provide sufficient background information to guide the construction and operation of an inelastic electron tunnelling spectrometer and interpretation of the data.