Direct ab initio molecular dynamics study on a microsolvated SN2 reaction of OH-(H2O) with CH3Cl

Reaction dynamics for a microsolvated SN2 reaction OH-(H2O)+CH3Cl have been investigated by means of the direct ab initio molecular dynamics method. The relative center-of-mass collision energies were chosen as 10, 15, and 25 kcal/mol. Three reaction channels were found as products. These are (1) a channel leading to complete dissociation (the products are CH3OH+Cl- +H2O: denoted by channel I), (2) a solvation channel (the products are Cl-(H2O)+CH3OH: channel II), and (3) a complex formation channel (the products are CH3OH...H2O+Cl-: channel III). The branching ratios for the three channels were drastically changed as a function of center-of-mass collision energy. The ratio of complete dissociation channel (channel I) increased with increasing collision energy, whereas that of channel III decreased. The solvation channel (channel II) was minor at all collision energies. The selectivity of the reaction channels and the mechanism are discussed on the basis of the theoretical results.     

Dynamics of the gas-phase reactions of chloride ion with fluoromethane: high excess translational activation energy for an endothermic S(N)2 reaction.

Guided ion beam tandem mass spectrometry techniques are used to examine the competing product channels in the reaction of Cl(-) with CH(3)F in the center-of-mass collision energy range 0.05-27 eV. Four anionic reaction products are detected: F(-), CH(2)Cl(-), FCl(-), and CHCl(-). The endothermic S(N)2 reaction Cl(-) + CH(3)F --> CH(3)Cl + F(-) has an energy threshold of E(0) = 181 +/- 14 kJ/mol, exhibiting a 52 +/- 16 kJ/mol effective barrier in excess of the reaction endothermicity. The potential energy of the S(N)2 transition state is well below the energy of the products. Dynamical impedances to the activation of the S(N)2 reaction are discussed, including angular momentum constraints, orientational effects, and the inefficiency of translational energy in promoting the reaction. The fluorine abstraction reaction to form CH(3) + FCl(-) exhibits a 146 +/- 33 kJ/mol effective barrier above the reaction endothermicity. Direct proton transfer to form HCl is highly inefficient, but HF elimination is observed above 268 +/- 95 kJ/mol. Potential energy surfaces for the reactions are calculated using the CCSD(T)/aug-cc-pVDZ and HF/6-31+G(d) methods and used to interpret the dynamics.     

A direct dynamics trajectory study of F- + CH(3)OOH reactive collisions reveals a major non-IRC reaction path

A direct dynamics simulation at the B3LYP/6-311+G(d,p) level of theory was used to study the F- + CH3OOH reaction dynamics. The simulations are in excellent agreement with a previous experimental study (J. Am. Chem. Soc. 2002, 124, 3196). Two product channels, HF + CH2O + OH- and HF + CH3OO-, are observed. The former dominates and occurs via an ECO2 mechanism in which F- attacks the CH3- group, abstracting a proton. Concertedly, a carbon-oxygen double bond is formed and OH- is eliminated. Somewhat surprisingly this is not the reaction path, predicted by the intrinsic reaction coordinate (IRC), which leads to a deep potential energy minimum for the CH2(OH)2...F- complex followed by dissociation to HF + CH2(OH)O-. None of the direct dynamics trajectories followed this path, which has an energy release of -63 kcal/mol and is considerably more exothermic than the ECO2 path whose energy release is -27 kcal/mol. Other product channels not observed, and which have a lower energy than that for the ECO2 path, are F- + CO + H2 + H2O (-43 kcal/mol), F- + CH2O + H2O (-51 kcal/mol), and F- + CH2(OH)2 (-60 kcal/mol). Formation of the CH3OOH...F- complex, with randomization of its internal energy, is important, and this complex dissociates via the ECO2 mechanism. Trajectories which form HF + CH3OO- are nonstatistical events and, for the 4 ps direct dynamics simulation, are not mediated by the CH3OOH...F- complex. Dissociation of this complex to form HF + CH3OO- may occur on longer time scales.     

Dynamics of the O(3P) + C2H4 reaction: identification of five primary product channels (vinoxy, acetyl, methyl, methylene, and ketene) and branching ratios by the crossed molecular beam technique with soft electron ionization

The crossed molecular beam scattering technique with soft electron ionization (EI) is used to disentangle the complex dynamics of the polyatomic O(3P) + C2H4 reaction, which is of great relevance in combustion and atmospheric chemistry. Exploiting the newly developed capability of attaining universal product detection by using soft EI, at a collision energy of 54.0 kJ mol(-1), five different primary products have been identified, which correspond to the five exoergic competing channels leading to CH2CHO(vinoxy) + H, CH3CO(acetyl) + H, CH3(methyl) + HCO(formyl), CH2(methylene) + HCHO(formaldehyde), and CH2CO(ketene) + H2. From laboratory product angular and velocity distributions, center-of-mass product angular and translational energy distributions and the relative branching ratios for each channel have been obtained, affording an unprecedented characterization of this important reaction.     

Rotationally resolved reactive scattering: imaging detailed Cl+C2H6 reaction dynamics

The hydrogen atom abstraction reaction of Cl (2P3/2) with ethane has been studied using the crossed molecular beam technique with dc slice imaging at collision energies from 3.2 to 10.4 kcal/mol. The products HCl (v,J) (v = 0, J = 0-5) were state-selectively detected using 2+1 resonance enhanced multiphoton ionization. The images were used to obtain the center-of-mass frame product angular distributions and translational energy release distributions. Two general features were found in all probed HCl quantum states at 6.7 kcal/mol collision energy, and these features have distinct translational energy release and angular distributions, as described for HCl (v = 0, J = 2) in a recent preliminary report [Li et al., J. Chem. Phys. 124, 011102 (2006)]. The results for HCl (v = 0, J = 2) at four collision energies were also compared to investigate the energy-dependent dynamics. We discuss the reaction in terms of a variety of models of polyatomic reaction dynamics. The dynamics of this well studied system are more complicated than can be accounted for by a single mechanism, and the results call for further theoretical and experimental investigations.     

Collision energy dependence of the O(1D) + HCl --> OH + Cl(2P) reaction studied by crossed beam scattering and quasiclassical trajectory calculations on ab initio potential energy surfaces

The dynamics of the O(1D) + HCl --> OH + Cl(2P) reaction are investigated by a crossed molecular beam ion-imaging method and quasiclassical trajectory calculations on the three ab initio potential energy surfaces, the ground 1(1)A' and two excited (1(1)A' and 2(1)A') states. The scattering experiment was carried out at collision energies of 4.2, 4.5, and 6.4 kcal/mol. The observed doubly differential cross sections (DCSs) for the Cl(2P) product exhibit almost no collision energy dependence over this inspected energy range. The nearly forward-backward symmetric DCS indicates that the reaction proceeds predominantly on the ground-state potential energy surface at these energies. Variation of the forward-backward asymmetry with collision energy is interpreted using an osculating complex model. Although the potential energy surfaces obtained by CASSCF-MRCI ab initio calculations exhibit relatively low potential barriers of 1.6 and 6.5 kcal/mol for 1(1)A' and 2(1)A', respectively, the dynamics calculations indicate that contributions of these excited states are small at the collision energies lower than 15.0 kcal/mol. Theoretical DCSs calculated for the ground-state reaction pathway agree well with the observed ones. These experimental and theoretical results suggest that the titled reaction at collision energies less than 6.5 kcal/mol is predominantly via the ground electronic state.     

Formation of a Criegee intermediate in the low-temperature oxidation of dimethyl sulfoxide

Dimethyl sulfoxide (DMSO) is the major sulfur-containing constituent of the Marine Boundary Layer. It is a significant source of H2SO4 aerosol/particles and methane sulfonic acid via atmospheric oxidation processes, where the mechanism is not established. In this study, several new, low-temperature pathways are revealed in the oxidation of DMSO using CBS-QB3 and G3MP2 multilevel and B3LYP hybrid density functional quantum chemical methods. Unlike analogous hydrocarbon peroxy radicals the chemically activated DMSO peroxy radical, [CH3S(=O)CH2OO*]*, predominantly undergoes simple dissociation to a methylsulfinyl radical CH3S*(=O) and a Criegee intermediate, CH2OO, with the barrier to dissociation 11.3 kcal mol(-1) below the energy of the CH3S(=O)CH2* + O2 reactants. The well depth for addition of O2 to the CH3S(=O)CH2 precursor radical is 29.6 kcal mol(-1) at the CBS-QB3 level of theory. We believe that this reaction may serve an important role in atmospheric photochemical and irradiated biological (oxygen-rich) media where formation of initial radicals is facilitated even at lower temperatures. The Criegee intermediate (carbonyl oxide, peroxymethylene) and sulfinyl radical can further decompose, resulting in additional chain branching. A second reaction channel important for oxidation processes includes formation (via intramolecular H atom transfer) and further decomposition of hydroperoxide methylsulfoxide radical, *CH2S(=O)CH2OOH over a low barrier of activation. The initial H-transfer reaction is similar and common in analogous hydrocarbon radical + O2 reactions; but the subsequent very low (3-6 kcal mol(-1)) barrier (14 kcal mol(-1) below the initial reagents) to beta-scission products is not common in HC systems. The low energy reaction of the hydroperoxide radical is a beta-scission elimination of *CH2S(=O)CH2OOH into the CH2=S=O + CH2O + *OH product set. This beta-scission barrier is low, because of the delocalization of the *CH2 radical center through the -S(=O) group, to the -CH2OOH fragment in the transition state structure. The hydroperoxide methylsulfoxide radical can also decompose via a second reaction channel of intramolecular OH migration, yielding formaldehyde and a sulfur-centered hydroxymethylsulfinyl radical HOCH2S*(=O). The barrier of activation relative to initial reagents is 4.2 kcal mol(-1). Heats of formation for DMSO, DMSO carbon-centered radical and Criegee intermediate are evaluated at 298 K as -35.97 +/- 0.05, 13.0 +/- 0.2 and 25.3 +/- 0.7 kcal mol(-1) respectively using isodesmic reaction analysis. The [CH3S*(=O) + CH2OO] product set is shown to form a van der Waals complex that results in O-atom transfer reaction and the formation of new products CH3SO2* radical and CH2O. Proper orientation of the Criegee intermediate and methylsulfinyl radical, as a pre-stabilized pre-reaction complex, assist the process. The DMSO radical reaction is also compared to that of acetonyl radical.     

Adiabatic and nonadiabatic dynamics in the CH3(CD3)+HCl reaction

The scattering dynamics leading to the formation of Cl (2P(3/2)) and Cl* (2P(1/2)) products of the CH(3)+HCl reaction (at a mean collision energy =22.3 kcal mol(-1)) and the Cl (2P(3/2)) products of the CD(3)+HCl reaction (at =19.4 kcal mol(-1)) have been investigated by using photodissociation of CH(3)I and CD(3)I as sources of translationally hot methyl radicals and velocity map imaging of the Cl atom products. Image analysis with a Legendre moment fitting procedure demonstrates that, in all three reactions, the Cl/Cl* products are mostly forward scattered with respect to the HCl in the center-of-mass (c.m.) frame but with a backward scattered component. The distributions of the fraction of the available energy released as translation peak at f(t)=0.31-0.33 for all the reactions, with average values that lie in the range =0.42-0.47. The detailed analysis indicates the importance of collision energy in facilitating the nonadiabatic transitions that lead to Cl* production. The similarities between the c.m.-frame scattering and kinetic energy release distributions for Cl and Cl* channels suggest that the nonadiabatic transitions to a low-lying excited potential energy surface (PES) correlating to Cl* products occur after passage through the transition state region on the ground-state PES. Branching fractions for Cl* are determined to be 0.14+/-0.02 for the CH(3)+HCl reaction and 0.20+/-0.03 for the CD(3)+HCl reaction. The difference cannot be accounted for by changes in collision energy, mass effects, or vibrational excitation of the photolytically generated methyl radical reagents and instead suggests that the low-frequency bending modes of the CD(3)H or CH(4) coproduct are important mediators of the nonadiabatic couplings occurring in this reaction system.     

Imaging the nature of the mode-specific chemistry in the reaction of Cl atom with antisymmetric stretch-excited CH4

Following up our preliminary communication [Kawamata et al., Phys. Chem. Chem. Phys. 10, 4378 (2008)], the effects of the antisymmetric-stretching excitation of methane on the Cl((2)P(3/2))+CH(4) reaction are examined here over a wide range of initial collision energy in a crossed molecular beam imaging experiment. The antisymmetric stretch of CH(4) is prepared in a single rovibrational state of (v(3)=1, j=2) by direct infrared absorption, and the major product states of CH(3)(v=0) are probed by a time-sliced velocity-map imaging method. We find that at fixed collision energies, the stretching excitation promotes reaction rate. Compared to the ground-state reaction, this vibrational enhancement factor is, however, no more effective than the translational enhancement. The correlated HCl(v'=1) vibrational branching fraction shows a striking dependence on collision energies, varying from 0.7 at E(c)=2 kcal mol(-1) to about 0.2 at 13 kcal mol(-1). This behavior resembles the previously studied Cl+CH(2)D(2)(v(6)=1), but is in sharp contrast to the Cl+CHD(3)(v(1)=1) and CH(2)D(2)(v(1)=1) reactions. Dependences of experimental results on the probed rotational states of CH(3)(v=0) are also elucidated. We qualitatively interpret those experimental observations based on a conceptual framework proposed recently.     

Direct evidence for nonadiabatic dynamics in atom+polyatom reactions: crossed-jet laser studies of F+D2O-->DF+OD

Quantum-state-resolved reactive-scattering dynamics of F+D(2)O-->DF+OD have been studied at E(c.m.)=5(1) kcal/mol in low-density crossed supersonic jets, exploiting pulsed discharge sources of F atom and laser-induced fluorescence to detect the nascent OD product under single-collision conditions. The product OD is formed exclusively in the v(OD)=0 state with only modest rotational excitation ( =0.50(1) kcal/mol), consistent with the relatively weak coupling of the 18.1(1) kcal/mol reaction exothermicity into "spectator" bond degrees of freedom. The majority of OD products [68(1)%] are found in the ground ((2)Pi(32) (+/-)) spin-orbit state, which adiabatically correlates with reaction over the lowest and only energetically accessible barrier (DeltaE( not equal) approximately 4 kcal/mol). However, 32(1)% of molecules are produced in the excited spin-orbit state ((2)Pi(12) (+/-)), although from a purely adiabatic perspective, this requires passage over a DeltaE( not equal) approximately 25 kcal/mol barrier energetically inaccessible at these collision energies. This provides unambiguous evidence for nonadiabatic surface hopping in F+D(2)O atom abstraction reactions, indicating that reactive-scattering dynamics even in simple atom+polyatom systems is not always isolated on the ground electronic surface. Additionally, the nascent OD rotational states are well fitted by a two-temperature Boltzmann distribution, suggesting correlated branching of the reaction products into the DF(v=2,3) vibrational manifold.     

Crossed-beams studies of the dynamics of the H-atom abstraction reaction, O(3P) + CH4 → OH + CH3, at hyperthermal collision energies

The H-atom abstraction reaction, O((3)P) + CH(4) → OH + CH(3), has been studied at a hyperthermal collision energy of 64 kcal mol(-1) by two crossed-molecular-beams techniques. The OH products were detected with a rotatable mass spectrometer employing electron-impact ionization, and the CH(3) products were detected with the combination of resonance-enhanced multiphoton ionization (REMPI) and time-sliced ion velocity-map imaging. The OH products are mainly formed through a stripping mechanism, in which the reagent O atom approaches the CH(4) molecule at large impact parameters and the OH product is scattered in the forward direction: roughly the same direction as the reagent O atoms. Most of the available energy is partitioned into product translation. The dominance of the stripping mechanism is a unique feature of such H-atom abstraction reactions at hyperthermal collision energies. In the hyperthermal reaction of O((3)P) with CH(4), the H-atom abstraction reaction pathway accounts for 70% of the reactive collisions, while the H-atom elimination pathway to produce OCH(3) + H accounts for the other 30%.     

Crossed beam studies of the reactions of atomic oxygen in the ground 3P and first electronically excited 1D states with hydrogen sulfide

The reactions of both ground, (3)P, and electronically excited, (1)D, oxygen atoms with hydrogen sulfide, H(2)S, have been investigated by means of the crossed molecular beams method with mass spectrometric detection at different collision energies. Amongst the possible reaction channels those leading to HSO+H for the O((3)P) reaction and to HSO/HOS+H and SO+H(2) for the O((1)D) reaction have been identified and investigated. The dynamics of the channels leading to HSO/HOS+H are elucidated for the reactions of both states and the trend with increasing the collision energy analyzed. Noteworthily, the formation of SO+H(2) products appears to be an open channel for the O((1)D) reaction, at least for the highest collision energy investigated (11.8 kcal/mol). Finally, the recent experimental and theoretical estimates of the enthalpy of formation of the HSO radical have been critically analyzed to evaluate their conformity with the present experimental data.     

Quasi-Classical Trajectory Study of the Chemical Reaction Ca+CH3I

The Ca＋CH3I→CaI＋CH3 reaction system has been studied with the quasi-classical trajectory method on the extended Lond-Eyring-Polanyi-Sato（LEPS） potential energy surface. At collision energy Ecol=10.78 kJ/mol, the calculated results show that the CaI vibrational population peaks are located at v=2. The calculated cross section decreases slowly with the collision energy increasing. The angle product distributions tend toward backward scattering. The calculated （P2（J^1·K）） values deviate slightly from-0.5 and decrease with increasing collision energy. The Quasiclassical trajectory calculation（QCT） results are in reasonable agreement with experimental data. Moreover, the dynamics of the reaction has been discussed.     

Ab initio rate constants from hyperspherical quantum scattering: application to H+C2H6 and H+CH3OH

The dynamics and kinetics of the abstraction reactions of H atoms with ethane and methanol have been studied using a quantum mechanical procedure. Bonds being broken and formed are treated with explicit hyperspherical quantum dynamics. The ab initio potential energy surfaces for these reactions have been developed from a minimal number of grid points (average of 48 points) and are given by analytical functionals. All the degrees of freedom except the breaking and forming bonds are optimized using the second order perturbation theory method with a correlation consistent polarized valence triple zeta basis set. Single point energies are calculated on the optimized geometries with the coupled cluster theory and the same basis set. The reaction of H with C2H6 is endothermic by 1.5 kcal/mol and has a vibrationally adiabatic barrier of 12 kcal/mol. The reaction of H with CH3OH presents two reactive channels: the methoxy and the hydroxymethyl channels. The former is endothermic by 0.24 kcal/mol and has a vibrationally adiabatic barrier of 13.29 kcal/mol, the latter reaction is exothermic by 7.87 kcal/mol and has a vibrationally adiabatic barrier of 8.56 kcal/mol. We report state-to-state and state-selected cross sections together with state-to-state rate constants for the title reactions. Thermal rate constants for these reactions exhibit large quantum tunneling effects when compared to conventional transition state theory results. For H+CH3OH, it is found that the CH2OH product is the dominant channel, and that the CH3O channel contributes just 2% at 500 K. For both reactions, rate constants are in good agreement with some measurements.     

Barrierless reactions between two closed-shell molecules. I. Dynamics of F(2)+CH(3)SCH(3) reaction

A detailed experimental and theoretical investigation of the first-reported barrierless reaction between two closed-shell molecules [J. Chem. Phys. 127, 101101 (2007)] is presented. The translational energy and angular distributions of two product channels, HF+CH(2)SFCH(3) and F+CH(3)SFCH(3), determined at several collision energies, have been analyzed to reveal the dynamics of the studied reaction. Detailed analysis of the experimental and computational results supports the proposed reaction mechanism involving a short-lived F-F-S(CH(3))(2) intermediate, which can be formed without any activation energy. Other possible reaction mechanisms have been discriminated. The decay of the intermediate and competition between the two product channels have been discussed.     

Low temperature kinetics, crossed beam dynamics and theoretical studies of the reaction S((1)D) + CH4 and low temperature kinetics of S((1)D) + C2H2

The reaction between sulfur atoms in the first electronically excited state, S((1)D), and methane (CH(4)), has been investigated in a complementary fashion in (a) crossed-beam dynamics experiments with mass spectrometric detection and time-of-flight (TOF) analysis at two collision energies (30.4 and 33.6 kJ mol(-1)), (b) low temperature kinetics experiments ranging from 298 K down to 23 K, and (c) electronic structure calculations of stationary points and product energetics on the CH(4)S singlet potential energy surface. The rate coefficients for total loss of S((1)D) are found to be very large (ca. 2 × 10(-10) cm(3) molec(-1) s(-1)) down to very low temperatures indicating that the overall reaction is barrier-less. Similar measurements are also performed for S((1)D) + C(2)H(2), and also for this system the rate coefficients are found to be very large (ca. 3 × 10(-10) cm(3) molec(-1) s(-1)) down to very low temperatures. From laboratory angular and TOF distributions at different product masses for the reaction S((1)D) + CH(4), it is found that the only open reaction channel at the investigated collision energies is that leading to SH + CH(3). The product angular, T(θ), and translational energy, P(E'(T)), distributions in the center-of-mass frame are derived. The reaction dynamics are discussed in terms of two different micromechanisms: a dominant long-lived complex mechanism at small and intermediate impact parameters with a strongly polarized T(θ), and a direct pickup-type (stripping) mechanism occurring at large impact parameters with a strongly forward peaked T(θ). Interpretation of the experimental results on the S((1)D) + CH(4) reaction kinetics and dynamics is assisted by high-level theoretical calculations on the CH(4)S singlet potential energy surface. The dynamics of the SH + CH(3) forming channel are compared with those of the corresponding channel (leading to OH + CH(3)) in the related O((1)D) + CH(4) reaction, previously investigated in crossed-beams in other laboratories at comparable collision energies. The possible astrophysical relevance of S((1)D) reactions with hydrocarbons, especially in the chemistry of cometary comae, is discussed.     

Crossed Molecular Beam Study of the F+D2(v=1, j=0) Reaction

The reaction dynamics of the fluorine atom with vibrationally excited D₂(v=1, v=0) was investigated using the crossed beam method. The scheme of stimulated Raman pumping was employed for preparation of vibrationally excited D₂ molecules. Contribution from the reaction of spin-orbit excited F^?(²P_1/2) with vibrationally excited D₂ was not found. Reaction of spin-orbit ground F(²P_3/2) with vibrationally excited D2 was measured and DF products populated in v‘=2, 3, 4, 5 were observed. Compared with the vibrationally ground reaction, DF products from the vibrationally excited reaction of F(²P_3/2)+D₂(v=1, j=0) are rotationally “hotter”. Differential cross sections at four collision energies, ranging from 0.32 kcal/mol to 2.62 kcal/mol, were obtained. Backward scattering dominates for DF products in all vibrational levels at the lowest collision energy of 0.32 kcal/mol. As the collision energy increases, angular distribution of DF products gradually shifts from backward to sideway. The collision-energy dependence of differential cross section of DF(v’=5) at forward direction was also measured. Forward-scattered signal of DF(v'=5) appears at thecollision energy of 1.0 kcal/mol, and becomes dominated at 2.62 kcal/mol.     

Crossed-beam dynamics studies of the radical-radical combustion reaction O((3)P) + CH3 (methyl)

The dynamics of the radical-radical reaction O((3)P) + CH(3), a prototypical case for the reactions of atomic oxygen with alkyl radicals of great relevance in combustion chemistry, has been investigated by means of the crossed molecular beam technique with mass spectrometric detection at a collision energy of 55.9 kJ mol(-1). The results have been examined in the light of previous kinetic and theoretical work. From product angular and velocity distribution measurements, the dynamics of the predominant H-displacement channel leading to formaldehyde formation has been characterized. This channel has been found to proceed via the formation of an osculating complex; a significant coupling between the product centre-of-mass angular and translational energy distributions has been noted. Experimental attempts to characterize the dynamics of the channel leading to HCO + H(2) have failed and it remains unclear whether HCO is formed by the reaction and/or, if formed, a part of HCO does not dissociate quickly into CO + H.     

Direct dynamics classical trajectory simulations of the O+ + CH4 reaction at hyperthermal energies

A Born-Oppenheimer direct dynamics simulation of the O(+) + CH(4) reaction dynamics at hyperthermal energies has been carried out with the PM3 (ground quartet state) Hamiltonian. Calculations were performed at various collision energies ranging from 0.5 to 10 eV with emphasis on high energy collisions where this reaction is relevant to materials erosion studies in low Earth orbit and geosynchronous Earth orbit. Charge transfer to give CH(4)(+) is the dominant channel arising from O(+) + CH(4) collisions in this energy range, but most of the emphasis in our study is on collisions that lead to reaction. All energetically accessible reaction channels were found, including products containing carbon-oxygen bonds, which is in agreement with the results of recent experiments. After correcting for compensating errors in competing reaction channels, our excitation functions show quantitative agreement with experiment (for which absolute magnitudes of cross sections are available) at high collision energies (several eV). More detailed properties, such as translational and angular distributions, show qualitative agreement. The opacity function reveals a high selectivity for producing OH(+) at high impact parameters, CH(3)(+)/CH(2)(+)/H(2)O(+) at intermediate impact parameters, and H(2)CO(+)/HCO(+)/CO(+) at small impact parameters. Angular distributions for CH(3)(+)/CH(2)(+)/OH(+) are forward scattered at high collision energies which implies the importance of direct reaction mechanisms, while reaction complexes play an important role at lower energies, especially for the H(2)O(+) product. Finally, we find that the nominally spin-forbidden product CH(3)(+) + OH can be produced by a spin-allowed pathway that involves the formation of the triplet excited product CH(3)(+)(?(3)E). This explains why CH(3)(+) can have a high cross section, even at very low collision energies. The results of this work suggest that the PM3 method may be applied directly to the study of O(+) reactions with small alkane molecules and polymer surfaces.     

Computational study of reaction pathways for the formation of indium nitride from trimethylindium with HN3: comparison of the reaction with NH3 and that on TiO2 rutile (110) surface

The reactions of trimethylindium (TMIn) with HN3 and NH3 are relevant to the chemical vapor deposition of indium nitride thin film. The mechanisms and energetics of these reactions in the gas phase have been investigated by density functional theory and ab initio calculations using the CCSD(T)/Lanl2dz//B3LYP/Lanl2dz and CCSD(T)/Lanl2dz//MP2/Lanl2dz methods. The results of both methods are in good agreement for the optimized geometries and relative energies. These results suggest that the reaction with HN3 forms a new stable product, dimethylindiumnitride, CH3-In=N-CH3 via another stable In(CH3)2N3 (dimethylindium azide, DMInA) intermediate. DMInA may undergo unimolecular decomposition to form CH3InNCH3 by two main possible pathways: (1) a stepwise decomposition process through N2 elimination followed by CH3 migration from In to the remaining N atom and (2) a concerted process involving the concurrent CH3 migration and N2 elimination directly giving N2+CH3InNCH3. The reaction of TMIn with NH3 forms a most stable product DMInNH2 following the initial association and CH4-elimination reaction. The required energy barrier for the elimination of the second CH4 molecule from DMInNH2 is 74.2 kcal/mol. Using these reactions, we predict the heats of formation at 0 K for all the products and finally for InN which is 123+/-1 kcal/mol predicted by the two methods. The gas-phase reaction of HN3 with TMIn is compared with that occurring on rutile TiO2 (110). The most noticeable difference is the high endothermicity of the gas-phase reaction for InN production (53 kcal/mol) and the contrasting large exothermicity (195 kcal/mol) released by the low-barrier Langmuir-Hinshelwood type processes following the adsorption of TMIn and HN3 on the surface producing a horizontally adsorbed InN(a), Ti-NIn-O(a), and other products, CH4(g)+N2(g)+2CH3O(a) [J. Phys. Chem. B 2006, 110, 2263].