Imaging the nonadiabatic dynamics of the CH3 + HCl reaction

LAB-frame velocity distributions of Cl-atoms produced in the photoinitiated reaction of CH(3) radicals with HCl have been measured for both the ground Cl ((2)P(3/2)) and excited Cl* ((2)P(1/2)) spin-orbit states using a DC slice velocity-map ion imaging technique. The similarity of these distributions, as well as the average internal excitation of methane co-products for both Cl and Cl* pathways, suggest that all the reactive flux proceeds through the same transition state on the ground potential energy surface (PES) and that the couplings which promote nonadiabatic transitions to the excited PES correlating to Cl* occur later in the exit channel, beyond the TS region. The nature of these couplings is discussed in light of initial vibrational excitation of CH(3) radicals as well as previously reported nonadiabatic reactivity in other polyatomic molecule reactions. Furthermore, the scattering of the reaction products, derived using the photoloc method, suggests that at the high collision energy of our experiment (E(coll) = 22.3 kcal mol(-1)), large impact parameter collisions are favoured with a reduced kinematic constraint on the internal excitation of the methane co-product.     

Nonadiabatic dynamics in the CH3+HCl-->CH4+Cl(2PJ) reaction

Nonadiabatic dynamics in the title reaction have been investigated by 2+1 REMPI detection of the Cl(2P(3/2)) and Cl*(2P(1/2)) products. Reaction was initiated by photodissociation of CH(3)I at 266 nm within a single expansion of a dilute mixture of CH(3)I and HCl in argon, giving a mean collision energy of 7800 cm(-1) in the center-of-mass frame. Significant production of Cl* was observed, with careful checks made to ensure that no additional photochemical or inelastic scattering sources of Cl* perturbed the measurements. The fraction of the total yield of Cl(2P(J)) atoms formed in the J=1/2 level at this collision energy was 0.150+/-0.024, and must arise from nonadiabatic dynamics because the ground potential energy surface correlates to CH(4)+Cl(2P(3/2)) products.     

Accurate ab initio potential energy surface, thermochemistry, and dynamics of the Cl(2P, 2P(3/2) + CH4 → HCl + CH3 and H + CH3Cl reactions

We report a high-quality, ab initio, full-dimensional global potential energy surface (PES) for the Cl((2)P, (2)P(3/2)) + CH(4) reaction, which describes both the abstraction (HCl + CH(3)) and substitution (H + CH(3)Cl) channels. The analytical PES is a least-squares fit, using a basis of permutationally invariant polynomials, to roughly 16,000 ab initio energy points, obtained by an efficient composite method, including counterpoise and spin-orbit corrections for the entrance channel. This composite method is shown to provide accuracy almost equal to all-electron CCSD(T)/aug-cc-pCVQZ results, but at much lower computational cost. Details of the PES, as well as additional high-level benchmark characterization of structures and energetics are reported. The PES has classical barrier heights of 2650 and 15,060 cm(-1) (relative to Cl((2)P(3/2)) + CH(4)(eq)), respectively, for the abstraction and substitution reactions, in good agreement with the corresponding new computed benchmark values, 2670 and 14,720 cm(-1). The PES also accurately describes the potential wells in the entrance and exit channels for the abstraction reaction. Quasiclassical trajectory calculations using the PES show that (a) the inclusion of the spin-orbit corrections in the PES decreases the cross sections by a factor of 1.5-2.5 at low collision energies (E(coll)); (b) at E(coll) ≈ 13,000 cm(-1) the substitution channel opens and the H/HCl ratio increases rapidly with E(coll); (c) the maximum impact parameter (b(max)) for the abstraction reaction is ~6 bohr; whereas b(max) is only ~2 bohr for the substitution; (d) the HCl and CH(3) products are mainly in the vibrational ground state even at very high E(coll); and (e) the HCl rotational distributions are cold, in excellent agreement with experiment at E(coll) = 1280 cm(-1).     

Effect of bending and torsional mode excitation on the reaction Cl+CH4-->HCl+CH3

A beam containing CH(4), Cl(2), and He is expanded into a vacuum chamber where CH(4) is prepared via infrared excitation in a combination band consisting of one quantum of excitation each in the bending and torsional modes (nu(2)+nu(4)). The reaction is initiated by fast Cl atoms generated by photolysis of Cl(2) at 355 nm, and the resulting CH(3) and HCl products are detected in a state-specific manner using resonance-enhanced multiphoton ionization (REMPI). By comparing the relative amplitudes of the action spectra of Cl+CH(4)(nu(2)+nu(4)) and Cl+CH(4)(nu(3)) reactions, we determine that the nu(2)+nu(4) mode-driven reaction is at least 15% as reactive as the nu(3) (antisymmetric stretch) mode-driven reaction. The REMPI spectrum of the CH(3) products shows no propensity toward the formation of umbrella bend mode excited methyl radical, CH(3)(nu(2)=1), which is in sharp distinction to the theoretical expectation based on adiabatic correlations between CH(4) and CH(3). The rotational distribution of HCl(v=1) products from the Cl+CH(4)(nu(2)+nu(4)) reaction is hotter than the corresponding distribution from the Cl+CH(4)(nu(3)) reaction, even though the total energies of the two reactions are the same within 4%. An explanation for this enhanced rotational excitation of the HCl product from the Cl+CH(4)(nu(2)+nu(4)) reaction is offered in terms of the projection of the bending motion of the CH(4) reagent onto the rotational motion of the HCl product. The angular distributions of the HCl(nu=0) products from the Cl+CH(4)(nu(2)+nu(4)) reaction are backward scattered, which is in qualitative agreement with theoretical calculation. Overall, nonadiabatic product vibrational correlation and mode specificity of the reaction indicate that either the bending mode or the torsional mode or both modes are strongly coupled to the reaction coordinate.     

An investigation of nonadiabatic interactions in Cl(2Pj) + D2 via crossed-molecular-beam scattering

We have determined limits on the cross section for both electronically nonadiabatic excitation and quenching in the Cl((2)P(j)) + D(2) system. Our experiment incorporates crossed-molecular-beam scattering with state-selective Cl((2)P(12,32)) detection and velocity-mapped ion imaging. By colliding atomic chlorine with D(2), we address the propensity for collisions that result in a change of the spin-orbit level of atomic chlorine either through electronically nonadiabatic spin-orbit excitation Cl((2)P(32)) + D(2)-->Cl(*)((2)P(12)) + D(2) or through electronically nonadiabatic spin-orbit quenching Cl(*)((2)P(12)) + D(2)-->Cl((2)P(32)) + D(2). In the first part of this report, we estimate an upper limit for the electronically nonadiabatic spin-orbit excitation cross section at a collision energy of 5.3 kcal/mol, which lies above the energy of the reaction barrier (4.9 kcal/mol). Our analysis and simulation of the experimental data determine an upper limit for the excitation cross section as sigma(NA)< or =0.012 A(2). In the second part of this paper we investigate the propensity for electronically nonadiabatic spin-orbit quenching of Cl(*) following a collision with D(2) or He. We perform these experiments at collision energies above and below the energy of the reaction barrier. By comparing the amount of scattered Cl(*) in our images to the amount of Cl(*) lost from the atomic beam we obtain the maximum cross section for electronically nonadiabatic quenching as sigma(NA)< or =15(-15) (+44) A(2) for a collision energy of 7.6 kcal/mol. Our experiments show the probability for electronically nonadiabatic quenching in Cl(*) + D(2) to be indistinguishable to that for the kinematically identical system of Cl(*) + He.     

State-to-state dynamics of the Cl + CH3OH --> HCl + CH2OH reaction

Molecular chlorine, methanol, and helium are co-expanded into a vacuum chamber using a custom designed "late-mixing" nozzle. The title reaction is initiated by photolysis of Cl2 at 355 nm, which generates monoenergetic Cl atoms that react with CH3OH at a collision energy of 1960 +/- 170 cm(-1) (0.24 +/- 0.02 eV). Rovibrational state distributions of the nascent HCl products are obtained via 2 + 1 resonance enhanced multiphoton ionization, center-of-mass scattering distributions are measured by the core-extraction technique, and the average internal energy of the CH3OH co-products is deduced by measuring the spatial anisotropy of the HCl products. The majority (84 +/- 7%) of the HCl reaction products are formed in HCl(v = 0) with an average rotational energy of [Erot] = 390 +/- 70 cm(-1). The remaining 16 +/- 7% are formed in HCl(v = 1) and have an average rotational energy of [Erot] = 190 +/- 30 cm(-1). The HCl(v = 1) products are primarily forward scattered, and they are formed in coincidence with CH2OH products that have little internal energy. In contrast, the HCl(v = 0) products are formed in coincidence with CH2OH products that have significant internal energy. These results indicate that two or more different mechanisms are responsible for the dynamics in the Cl + CH3OH reaction. We suggest that (1) the HCl(v = 1) products are formed primarily from collisions at high impact parameter via a stripping mechanism in which the CH2OH co-products act as spectators, and (2) the HCl(v = 0) products are formed from collisions over a wide range of impact parameters, resulting in both a stripping mechanism and a rebound mechanism in which the CH2OH co-products are active participants. In all cases, the reaction of fast Cl atoms with CH3OH is with the hydrogen atoms on the methyl group, not the hydrogen on the hydroxyl group.     

Comparing the dynamical effects of symmetric and antisymmetric stretch excitation of methane in the Cl+CH4 reaction

The effects of two nearly isoenergetic C-H stretching motions on the gas-phase reaction of atomic chlorine with methane are examined. First, a 1:4:9 mixture of Cl(2), CH(4), and He is coexpanded into a vacuum chamber. Then, either the antisymmetric stretch (nu(3)=3019 cm(-1)) of CH(4) is prepared by direct infrared absorption or the infrared-inactive symmetric stretch (nu(1)=2917 cm(-1)) of CH(4) is prepared by stimulated Raman pumping. Photolysis of Cl(2) at 355 nm generates fast Cl atoms that initiate the reaction with a collision energy of 1290+/-175 cm(-1) (0.16+/-0.02 eV). Finally, the nascent HCl or CH(3) products are detected state-specifically via resonance enhanced multiphoton ionization and separated by mass in a time-of-flight spectrometer. We find that the rovibrational distributions and state-selected differential cross sections of the HCl and CH(3) products from the two vibrationally excited reactions are nearly indistinguishable. Although Yoon et al. [J. Chem. Phys. 119, 9568 (2003)] report that the reactivities of these two different types of vibrational excitation are quite different, the present results indicate that the reactions of symmetric-stretch excited or antisymmetric-stretch excited methane with atomic chlorine follow closely related product pathways. Approximately 37% of the reaction products are formed in HCl(v=1,J) states with little rotational excitation. At low J states these products are sharply forward scattered, but become almost equally forward and backward scattered at higher J states. The remaining reaction products are formed in HCl(v=0,J) and have more rotational excitation. The HCl(v=0,J) products are predominantly back and side scattered. Measurements of the CH(3) products indicate production of a non-negligible amount of umbrella bend excited methyl radicals primarily in coincidence with the HCl(v=0,J) products. The data are consistent with a model in which the impact parameter governs the scattering dynamics.     

Direct ab initio molecular dynamics study on a microsolvated SN2 reaction of OH-(H2O) with CH3Cl

Reaction dynamics for a microsolvated SN2 reaction OH-(H2O)+CH3Cl have been investigated by means of the direct ab initio molecular dynamics method. The relative center-of-mass collision energies were chosen as 10, 15, and 25 kcal/mol. Three reaction channels were found as products. These are (1) a channel leading to complete dissociation (the products are CH3OH+Cl- +H2O: denoted by channel I), (2) a solvation channel (the products are Cl-(H2O)+CH3OH: channel II), and (3) a complex formation channel (the products are CH3OH...H2O+Cl-: channel III). The branching ratios for the three channels were drastically changed as a function of center-of-mass collision energy. The ratio of complete dissociation channel (channel I) increased with increasing collision energy, whereas that of channel III decreased. The solvation channel (channel II) was minor at all collision energies. The selectivity of the reaction channels and the mechanism are discussed on the basis of the theoretical results.     

Dynamics of the O(3P) + CH4 → OH + CH3 reaction is similar to that of a triatomic reaction

The O((3)P) + CH(4) reaction has been investigated using the quasi-classical trajectory (QCT) method and an ab initio pseudotriatomic potential energy surface (PES). This has been mainly motivated by very recent experiments which support the reliability of the triatomic modeling even at high collision energy ( = 64 kcal mol(-1)). The QCT results agree rather well with the experiments (translational and angular distributions of products); i.e., the ab initio pseudotriatomic modeling "captures" the essence of the reaction dynamics, although the PES was not optimized for high E(col). Furthermore, similar experiments on the O((3)P) + CD(4) reaction at moderate E(col) (12.49 kcal mol(-1)) have also been of a large interest here and, under these softer reaction conditions, the QCT method leads to results which are almost in quantitative agreement with experiments. The utility of the ab initio pseudotriatomic modeling has also been recognized for other analogous systems (X + CH(4)) but with very different PESs.     

Unimolecular rate constants for HX or DX elimination (X = F, Cl) from chemically activated CF3CH2CH2Cl, C2H5CH2Cl, and C2D5CH2Cl: threshold energies for HF and HCl elimination

Vibrationally activated CF(3)CH(2)CH(2)Cl molecules were prepared with 94 kcal mol(-1) of vibrational energy by the combination of CF(3)CH(2) and CH(2)Cl radicals and with 101 kcal mol(-1) of energy by the combination of CF(3) and CH(2)CH(2)Cl radicals at room temperature. The unimolecular rate constants for elimination of HCl from CF(3)CH(2)CH(2)Cl were 1.2 x 10(7) and 0.24 x 10(7) s(-1) with 101 and 94 kcal mol(-1), respectively. The product branching ratio, k(HCl)/k(HF), was 80 +/- 25. Activated CH(3)CH(2)CH(2)Cl and CD(3)CD(2)CH(2)Cl molecules with 90 kcal mol(-1) of energy were prepared by recombination of C(2)H(5) (or C(2)D(5)) radicals with CH(2)Cl radicals. The unimolecular rate constant for HCl elimination was 8.7 x 10(7) s(-1), and the kinetic isotope effect was 4.0. Unified transition-state models obtained from density-functional theory calculations, with treatment of torsions as hindered internal rotors for the molecules and the transition states, were employed in the calculation of the RRKM rate constants for CF(3)CH(2)CH(2)Cl and CH(3)CH(2)CH(2)Cl. Fitting the calculated rate constants from RRKM theory to the experimental values provided threshold energies, E(0), of 58 and 71 kcal mol(-1) for the elimination of HCl or HF, respectively, from CF(3)CH(2)CH(2)Cl and 54 kcal mol(-1) for HCl elimination from CH(3)CH(2)CH(2)Cl. Using the hindered-rotor model, threshold energies for HF elimination also were reassigned from previously published chemical activation data for CF(3)CH(2)CH(3,) CF(3)CH(2)CF(3), CH(3)CH(2)CH(2)F, CH(3)CHFCH(3), and CH(3)CF(2)CH(3). In an appendix, the method used to assign threshold energies was tested and verified using the combined thermal and chemical activation data for C(2)H(5)Cl, C(2)H(5)F, and CH(3)CF(3).     

Quasiclassical trajectory study of the Cl+CH4 reaction dynamics on a quadratic configuration interaction with single and double excitation interpolated potential energy surface

An ab initio interpolated potential energy surface (PES) for the Cl+CH(4) reactive system has been constructed using the interpolation method of Collins and co-workers [J. Chem. Phys. 102, 5647 (1995); 108, 8302 (1998); 111, 816 (1999); Theor. Chem. Acc. 108, 313 (2002)]. The ab initio calculations have been performed using quadratic configuration interaction with single and double excitation theory to build the PES. A simple scaling all correlation technique has been used to obtain a PES which yields a barrier height and reaction energy in good agreement with high level ab initio calculations and experimental measurements. Using these interpolated PESs, a detailed quasiclassical trajectory study of integral and differential cross sections, product rovibrational populations, and internal energy distributions has been carried out for the Cl+CH(4) and Cl+CD(4) reactions, and the theoretical results have been compared with the available experimental data. It has been shown that the calculated total reaction cross sections versus collision energy for the Cl+CH(4) and Cl+CD(4) reactions is very sensitive to the barrier height. Besides, due to the zero-point energy (ZPE) leakage of the CH(4) molecule to the reaction coordinate in the quasiclassical trajectory (QCT) calculations, the reaction threshold falls below the barrier height of the PES. The ZPE leakage leads to CH(3) and HCl coproducts with internal energy below its corresponding ZPEs. We have shown that a Gaussian binning (GB) analysis of the trajectories yields excitation functions in somehow better agreement with the experimental determinations. The HCl(v'=0) and DCl(v'=0) rotational distributions are as well very sensitive to the ZPE problem. The GB correction narrows and shifts the rotational distributions to lower values of the rotational quantum numbers. However, the present QCT rotational distributions are still hotter than the experimental distributions. In both reactions the angular distributions shift from backward peaked to sideways peaked as collision energy increases, as seen in the experiments and other theoretical calculations.     

A crossed molecular beam imaging study of the O(1D2)+HCl-->OH+Cl(2P J=3/2, 1/2) reaction.

A crossed molecular beam study is presented for the O((1)D(2))+HCl-->OH+Cl((2)P(J)) reaction at the collision energy of 6 kcal mol(-1). State-resolved doubly differential cross sections are obtained for the Cl((2)P(J=3/2) ) and Cl*((2)P(J=1/2) ) products by velocity-map ion imaging. Both products are slightly more forward scattered, which suggests a reaction mechanism without a long-lived intermediate in the ground electronic state. A small fraction (23 %) of the energy release into the translational degree of freedom indicates strong internal excitation of the counterpart OH radical. The contribution of the electronic excited states of O--HCl to the overall reaction is also examined from the doubly differential cross sections.     

Ab initio Study of the Potential Energy Surface and Product Branching Ratios for Reaction of O（^1D） with C2H5CI

The potential energy surface of O（^1D）＋C2H5Cl reaction was studied using QCISD（T）/6- 311＋＋G（d,p）//MP2/6-31G（d,p） method. The calculations reveal an insertion-elimination mechanism. The insertion reaction of O（^1D） and C2H5Cl produces two energy-rich intermediates, IM1 and IM2, which subsequently decompose into various products. The calculations of the branching ratios of various products formed through the two intermediates were carried out using RRKM （Rice-Ramsperger-Kassel-Marcus） theory at the collision energies of 0, 20.9, 41.8, 62.7, 83.6, 104.5, and 125.4 kJ/mol. HCl is the main decomposition product for IM1; CH2OH is the main decomposition product for IM2. Since IM1 is more stable than IM2, HCl is probably the main product of the O（^1D）＋C2H5Cl reaction.     

Quantum and quasiclassical studies of the O(3P)+HCl-->OH+Cl(2P) reaction using benchmark potential surfaces

We have performed quantum mechanical (QM) dynamics calculations within the independent-state approximation with new benchmark triplet A" and A' surfaces [B. Ramachandran et al., J. Chem. Phys. 119, 9590 (2003)] for the rovibronic state-to-state measurements of the reaction O(3P)+HCl(v=2,j=1,6,9)-->OH(v'j')+Cl(2P) [Zhang et al., J. Chem. Phys. 94, 2704 (1991)]. The QM and experimental rotational distributions peak at similar OH(j') levels, but the QM distributions are significantly narrower than the measurements and previous quasiclassical dynamics studies. The OH(low j) populations observed in the measurements are nearly absent in the QM results. We have also performed quasiclassical trajectory with histogram binning (QCT-HB) calculations on these same benchmark surfaces. The QCT-HB rotational distributions, which are qualitatively consistent with measurements and classical dynamics studies using other surfaces, are much broader than the QM results. Application of a Gaussian binning correction (QCT-GB) dramatically narrows and shifts the QCT-HB rotational distributions to be in very good agreement with the QM results. The large QCT-GB correction stems from the special shape of the joint distribution of the classical rotational/vibrational action of OH products. We have also performed QM and QCT calculations for the transition, O+HCl(v=0,T=300 K)-->OH(v'j')+Cl from threshold to approximately 130 kcal mol(-1) collision energy as a guide for possible future hyperthermal O-atom measurements. We find in general a mixed energy release into translation and rotation consistent with a late barrier to reaction. Angular distributions at high collision energy are forward peaked, consistent with a stripping mechanism. Direct collisional excitation channel cross sections, O+HCl(v=0,T=300 K)-->O+HCl(v'=1), in the same energy range are large, comparable in magnitude to the reactive channel cross sections. Although the (3)A" state dominates most collision processes, above approximately 48 kcal mol(-1), the (3)A' state plays the major role in collisional excitation.     

Reaction dynamics of Ca(4s3d 1D2)+CH4-->CaH(X 2Sigma+)+CH3: reaction pathway and energy disposal for the CaH product

The reaction pathway for Ca(4s3d 1D2)+CH4-->CaH(X 2Sigma+)+CH3 has been investigated by using a pump-probe technique in combination with potential-energy surface (PES) calculations. The nascent product distributions of CaH have been characterized with Boltzmann rotational temperatures of 1013+/-102 and 834+/-70 K for the v=0 and 1 levels, respectively, and a Boltzmann vibrational temperature of 1313+/-173 K. The rotational and vibrational energy partitions in CaH have been estimated to be 461+/-45 and 252+/-15 cm(-1), respectively. According to the PES calculations, the pathway favors an insertion mechanism. Ca(3 1D2) approaches CH4 along an attractive potential surface in a C2v (or Cs) symmetry and then the collision complex undergoes nonadiabatic transition to the reactive ground-state surface. An Arrhenius plot shows a potential-energy requirement of 2695+/-149 cm(-1), which accounts for the endothermicity of 2930 cm(-1) for the reaction scheme. The Ca-C bond distance in the transition state structure is short enough to allow for tight orbital overlap between CaH and CH3. The strong coupling between the moieties renders the energy transfer sufficient from CaH into the CH3 radical. As compared to the Ca(4 1P1) reaction, the dissociation lifetime of the intermediate complex with less excess energy is prolonged so as to cause much less vibrational energy disposal into CaH.     

Probing the barrier for CH2CHCO --> CH2CH + CO by the velocity map imaging method

This work determines the dissociation barrier height for CH2CHCO --> CH2CH + CO using two-dimensional product velocity map imaging. The CH2CHCO radical is prepared under collision-free conditions from C-Cl bond fission in the photodissociation of acryloyl chloride at 235 nm. The nascent CH2CHCO radicals that do not dissociate to CH2CH + CO, about 73% of all the radicals produced, are detected using 157-nm photoionization. The Cl(2P(3/2)) and Cl(2P(1/2)) atomic fragments, momentum matched to both the stable and unstable radicals, are detected state selectively by resonance-enhanced multiphoton ionization at 235 nm. By comparing the total translational energy release distribution P(E(T)) derived from the measured recoil velocities of the Cl atoms with that derived from the momentum-matched radical cophotofragments which do not dissociate, the energy threshold at which the CH2CHCO radicals begin to dissociate is determined. Based on this energy threshold and conservation of energy, and using calculated C-Cl bond energies for the precursor to produce CH2CHC*O or C*H2CHCO, respectively, we have determined the forward dissociation barriers for the radical to dissociate to vinyl + CO. The experimentally determined barrier for CH2CHC*O --> CH2CH + CO is 21+/-2 kcal mol(-1), and the computed energy difference between the CH2CHC*O and the C*H2CHCO forms of the radical gives the corresponding barrier for C*H2CHCO --> CH2CH + CO to be 23+/-2 kcal mol(-1). This experimental determination is compared with predictions from electronic structure methods, including coupled-cluster, density-functional, and composite Gaussian-3-based methods. The comparison shows that density-functional theory predicts too low an energy for the C*H2CHCO radical, and thus too high a barrier energy, whereas both the Gaussian-3 and the coupled-cluster methods yield predictions in good agreement with experiment. The experiment also shows that acryloyl chloride can be used as a photolytic precursor at 235 nm of thermodynamically stable CH2CHC*O radicals, most with an internal energy distribution ranging from approximately 3 to approximately 21 kcal mol(-1). We discuss the results with respect to the prior work on the O(3P) + propargyl reaction and the analogous O(3P) + allyl system.     

QCT and QM calculations of the Cl(2P) + NH3 reaction: influence of the reactant well on the dynamics

A detailed dynamics study, using both quasi-classical trajectory (QCT) and reduced-dimensional quantum mechanical (QM) calculations, was carried out to understand the reactivity and mechanism of the Cl((2)P) + NH(3)→ HCl + NH(2) gas-phase reaction, which evolves through deep wells in the entry and exit channels. The calculations were performed on an analytical potential energy surface recently developed by our group, PES-2010 [M. Monge-Palacios, C. Rangel, J. C. Corchado and J. Espinosa-Garcia, Int. J. Quantum. Chem., 2011], together with a simplified model surface, mod-PES, in which the reactant well is removed to analyze its influence. The main finding was that the QCT and QM methods show a change of the reaction probability with collision energy, suggesting a change of the atomic-level mechanism of reaction with energy. This change disappeared when the mod-PES was used, showing that the behaviour at low energies is a direct consequence of the existence of the reactant well. Analysis of the trajectories showed that different mechanisms operate depending on the collision energy. Thus, while at high energies (E(coll) > 5 kcal mol(-1)) practically all trajectories are direct, at low energies (E(coll) < 3 kcal mol(-1)) the trajectories are indirect, i.e., with the mediation of a trapping complex in the entry and/or the exit wells. The reactant complex allows repeated encounters between the reactants, increasing the reaction probability at low energies. The differential cross section results reinforce this change of mechanism, showing also the influence of the reactant well on this reaction. Thus, the PES-2010 surface yields a forward-backward symmetry in the scattering, while when the reactant well is removed with the mod-PES the shape is more isotropic.     

Angular distributions for the F+H(2)-->HF+H reaction: the role of the F spin-orbit excited state and comparison with molecular beam experiments

We report quantum mechanical calculations of center-of-mass differential cross sections (DCS) for the F+H(2)-->HF+H reaction performed on the multistate [Alexander-Stark-Werner (ASW)] potential energy surfaces (PES) that describe the open-shell character of this reaction. For comparison, we repeat single-state calculations with the Stark-Werner (SW) and Hartke-Stark-Werner (HSW) PESs. The ASW DCSs differ from those predicted for the SW and HSW PES in the backward direction. These differences arise from nonadiabatic coupling between several electronic states. The DCSs are then used in forward simulations of the laboratory-frame angular distributions (ADs) measured by Lee, Neumark, and co-workers [J. Chem. Phys. 82, 3045 (1985)]. The simulations are scaled to match experiment over the range 12 degrees 相似文献   

Gas-phase SN2 and bromine abstraction reactions of chloride ion with bromomethane: reaction cross sections and energy disposal into products

Reaction cross sections and product velocity distributions are presented for the bimolecular gas-phase nucleophilic substitution (S(N)2) reaction Cl(-) + CH(3)Br --> CH(3)Cl + Br(-) as a function of collision energy, 0.06-24 eV. The exothermic S(N)2 reaction is inefficient compared with phase space theory (PST) and ion-dipole capture models. At the lowest energies, the S(N)2 reaction exhibits the largest cross sections and symmetrical forward/backward scattering of the CH(3)Cl + Br(-) products. The velocity distributions of the CH(3)Cl + Br(-) products are in agreement with an isotropic PST distribution, consistent with a complex-mediated reaction and a statistical internal energy distribution of the products. Above 0.2 eV, the velocity distributions become nonisotropic and nonstatistical, exhibiting CH(3)Cl forward scattering between 0.2 and 0.6 eV. A rebound mechanism with backward scattering above 0.6 eV is accompanied by a new rising feature in the CH(3)Cl + Br(-) cross sections. The competitive endothermic reaction Cl(-) + CH(3)Br --> CH(3) + ClBr(-) rises from its thermochemical threshold at 1.9 +/- 0.4 eV, showing nearly symmetrically scattered products just above threshold and strong backward scattering above 3 eV associated with a second feature in the cross section.     

Imaging the nature of the mode-specific chemistry in the reaction of Cl atom with antisymmetric stretch-excited CH4

Following up our preliminary communication [Kawamata et al., Phys. Chem. Chem. Phys. 10, 4378 (2008)], the effects of the antisymmetric-stretching excitation of methane on the Cl((2)P(3/2))+CH(4) reaction are examined here over a wide range of initial collision energy in a crossed molecular beam imaging experiment. The antisymmetric stretch of CH(4) is prepared in a single rovibrational state of (v(3)=1, j=2) by direct infrared absorption, and the major product states of CH(3)(v=0) are probed by a time-sliced velocity-map imaging method. We find that at fixed collision energies, the stretching excitation promotes reaction rate. Compared to the ground-state reaction, this vibrational enhancement factor is, however, no more effective than the translational enhancement. The correlated HCl(v'=1) vibrational branching fraction shows a striking dependence on collision energies, varying from 0.7 at E(c)=2 kcal mol(-1) to about 0.2 at 13 kcal mol(-1). This behavior resembles the previously studied Cl+CH(2)D(2)(v(6)=1), but is in sharp contrast to the Cl+CHD(3)(v(1)=1) and CH(2)D(2)(v(1)=1) reactions. Dependences of experimental results on the probed rotational states of CH(3)(v=0) are also elucidated. We qualitatively interpret those experimental observations based on a conceptual framework proposed recently.