3,3′‐Bi(1,2,4‐oxadiazoles) Featuring the Fluorodinitromethyl and Trinitromethyl Groups

Here we report on the preparation of two hydrogen atom free 3,3′‐bi(1,2,4‐oxadiazole) derivatives. 5,5′‐Bis(fluorodinitromethyl)‐3,3′‐bi(1,2,4‐oxadiazole) was synthesised by fluorination of diammonium 5,5′‐bis(dinitromethanide)‐3,3′‐bi(1,2,4‐oxadiazole). For our previously reported analogue 5,5′‐bis(trinitromethyl)‐3,3′‐bi(1,2,4‐oxadiazole), a new synthetic route starting from new 3,3′‐bi(1,2,4‐oxadiazolyl)‐5,5′‐diacetic acid was developed. In this course also hitherto unknown 5,5′‐dimethyl‐3,3′‐bi(1,2,4‐oxadiazole) was isolated. The compounds were characterised by multinuclear NMR spectroscopy, IR and Raman spectroscopy, elemental analysis as well as mass spectrometry. X‐ray diffraction studies were performed and the crystal structures for the 5,5'‐dimethyl and 5,5'‐(fluorodinitromethyl) derivatives are reported. The energetic 5,5'‐(fluorodinitromethyl) and 5,5'‐(trinitromethyl) compounds do not contain any hydrogen atoms and show remarkable high densities. Furthermore, the thermal stabilities and sensitivities were determined by differential scanning calorimetry (DSC) and standardised impact and friction tests. The heats of formation were calculated by the atomisation method based on CBS‐4M enthalpies. With these values and the room‐temperature X‐ray densities, several detonation and propulsion parameters, such as the detonation velocity and pressure as well as the specific impulse of mixtures with aluminium, were computed using the EXPLO5 code.     

Synthesis and Characterization of 3,3′‐Bis(Dinitromethyl)‐5,5′‐Azo‐1H‐1,2,4‐Triazole

The synthesis of 3,3′‐bis(dinitromethyl)‐5,5′‐azo‐1H‐1,2,4‐triazole ( 5 ) using the readily available starting material 2‐(5‐amino‐1H‐1,2,4‐triazol‐3‐yl)acetic acid ( 1 ) is described. All compounds were characterized by means of NMR, IR, and Raman spectroscopy. The energetic compound 5 was additionally characterized by single‐crystal X‐ray diffraction and DSC measurements. The sensitivities towards impact, friction and electrical discharge were determined. In addition, detonation parameters (e.g. heat of explosion, detonation velocity) of the target compound were computed using the EXPLO5 code based on the calculated (CBS‐4M) heat of formation and X‐ray density.     

Synthesis and Promising Properties of a New Family of High‐Nitrogen Compounds: Polyazido‐ and Polyamino‐Substituted N,N′‐Azo‐1,2,4‐triazoles

A new family of high‐nitrogen compounds, that is, polyazido‐ and polyamino‐substituted N,N′‐azo‐1,2,4‐triazoles, were synthesized in a safe and convenient manner and fully characterized. The structures of 3,3′,5,5′‐tetra(azido)‐4,4′‐azo‐1,2,4‐triazole ( 15 ) and 3,3′,5,5′‐tetra(amino)‐4,4′‐azo‐1,2,4‐triazole ( 23 ) were also confirmed by X‐ray diffraction. Differential scanning calorimetry (DSC) was performed to determine their thermal stability. Their heats of formation and density, which were calculated by using Gaussian 03, were used to determine the detonation performances of the related compounds (EXPLO 5.05). The heats of formation of the polyazido compounds were also derived by using an additive method. Compound 15 has the highest heat of formation (6933 kJ kg^?1) reported so far for energetic compounds and a detonation performance that is comparable to that of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX), while compound 23 has a decomposition temperature of up to 290 °C.     

Energetic Materials Based on 5,5′‐Diamino‐4,4′‐dinitramino‐3,3′‐bi‐1,2,4‐triazole

A simple and straightforward synthesis of 5,5′‐diamino‐4,4′‐dinitramino‐3,3′‐bi‐1,2,4‐triazole by the selective nitration of 4,4′,5,5′‐tetraamino‐3,3′‐bi‐1,2,4‐triazole is presented. The interaction of the amino and nitramino groups improves the energetic properties of this functionalized bitriazole. For a deeper investigation of these properties, various nitrogen‐rich derivatives were synthesized. The new compounds were investigated and characterized by spectroscopy (¹H and ¹³C NMR, IR, Raman), elemental analysis, mass spectrometry, differential thermal analysis (DTA), X‐ray analysis, and impact and friction sensitivities (IS, FS). X‐ray analyses were performed and deliver insight into structural characteristics with which the stability of the compounds can be explained. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory, revealing highly positive heats of formation. The energetic performance of the new molecules was predicted with the EXPLO5 V6.02 computer. A small‐scale shock reactivity test (SSRT) and a toxicity test gave a first impression of the performance and toxicity of selective compounds.     

Synthesis and Characterization of Bis(triaminoguanidinium) 5,5′‐Dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazolate – A Novel Insensitive Energetic Material

The synthesis of 5,5′‐diamino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 3 ) by reaction of 5‐acetylamino‐3‐amino‐1H‐1,2,4‐triazole ( 2 ) with potassium permanganate is described. The application of the very straightforward and efficient acetyl protection of 3,5‐diamino‐1H‐1,2,4‐triazole allows selective reactions of the remaining free amino group to form the azo‐functionality. Compound 3 is used as starting material for the synthesis of 5,5′‐dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 4 ), which subsequently reacted with organic bases (ammonia, hydrazine, guanidine, aminoguanidine, triaminoguanidine) to form the corresponding nitrogen‐rich triazolate salts ( 5 – 9 ). All substances were fully characterized by IR and Raman as well as multinuclear NMR spectroscopy, mass spectrometry, and differential scanning calorimetry. Selected compounds were additionally characterized by low temperature single‐crystal X‐ray diffraction measurements. The heats of formation of 4 – 9 were calculated by the CBS‐4M method to be 647.7 ( 4 ), 401.2 ( 5 ), 700.4 ( 6 ), 398.4 ( 7 ), 676.5 ( 8 ), and 1089.2 ( 9 ) kJ · mol^–1. With these values as well as the experimentally determined densities several detonation parameters were calculated using both computer codes EXPLO5.03 and EXPLO5.04. In addition, the sensitivities of 5 – 9 were determined by the BAM drophammer and friction tester as well as a small scale electrical discharge device.     

Metal Salts of 3,3′‐Diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole in Pyrotechnic Compositions

The synthesis of alkali and alkaline earth salts of 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole (H₂ANAT) is reported. The fast and convenient three steps reaction toward the target compounds does not require any organic solvents. In addition to an intensive characterization of all synthesized metal salts, the focus was on developing chlorine and nitrate‐free red‐light‐generating pyrotechnical formulations. Strontium 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bitriazolate hexahydrate served as colorant and oxidizer in one molecule. The energetic properties of all developed pyrotechnical formulations assure safe handling and manufacturing.     

Synthesis,Crystal Structure,and Thermal Behavior of a Novel Insensitive Energetic Cocrystal Composed of 3,3′‐Bis(1,2,4‐oxadiazole)‐5,5′‐dione and 4‐Amino‐1,2,4‐triazole

A novel insensitive energetic cocrystal consisting of 3,3′‐bis(1,2,4‐oxadiazole)‐5,5′‐dione and 4‐amino‐1,2,4‐triazole in a 1:2 molar ratio was prepared and characterized. The structure of this cocrystal was characterized by single‐crystal X‐ray diffraction. The crystal structure of the cocrystal is a monoclinic system with P1 space group. Properties of the cocrystal studied included thermal decomposition and detonation performance. This cocrystal has a crystal density of 1.689 g · cm^–3 at 173 K and good detonation performance (D = 6940 m · s^–1, P = 20.9 GPa). Moreover, measured impact and friction sensitivities (IS > 40 J, FS > 360 N) show that it can be classified as an insensitive energetic material. Its thermodynamic properties indicate that it has moderate thermal stability with a sharp exothermic peak (244 °C, 5 K · min^–1) and a high critical temperature of thermal explosion (523 K). In view of the observations above, it may serve as a promising alternative to known explosives such as TNT.     

Synthesis,Crystal Structure,and Properties of Energetic Complex Magnesium 5,5′‐Dinitramino‐3,3′‐bi[1,2,4‐triazolate] Hexahydrate

Alkaline Earth metal (Mg) energetic complex with 5,5′‐dinitramino‐3,3′‐bi[1,2,4‐triazolate] dihydrate (DNABT) has been synthesized and structurally characterized by FTIR spectroscopy, elemental analysis, and single X‐ray diffraction. The thermal decomposition processes of the complex and DNABT were studied by means of the TDA‐TG technologies. Sensitivity tests reveal that the complex is more insensitive to mechanical stimuli than DNABT. Combustion behavior shows that 1 has good color performances.     

Synthesis,Characterisation and Crystal Structures of Two Bi‐oxadiazole Derivatives Featuring the Trifluoromethyl Group

The synthesis, characterisation, and crystal structure determination of the closely related compounds 3,3′‐bi‐(5‐trifluoromethyl‐1,2,4‐oxadiazole) and 5,5′‐bi‐(2‐ trifluoromethyl‐1,3,4‐oxadiazole) are reported. These two compounds are known for their bioactivity; however, in this study they serve as model compounds to evaluate the suitability of the heterocyclic oxadiazole ring system for energetic materials when the fluorine atoms in the exocyclic CF₃ groups are substituted successively by nitro groups. Quantum chemical calculations for the bi‐1,3,4‐ oxadiazole derivatives with difluoronitromethyl, fluorodinitromethyl, and trinitromethyl groups have been carried out and predict promising energetic performances for both explosive and propulsive applications.     

Maximum Compaction of Ionic Organic Explosives: Bis(hydroxylammonium) 5,5′‐Dinitromethyl‐3,3′‐bis(1,2,4‐oxadiazolate) and its Derivatives

Within this contribution on bis(oxadiazoles) we report on bis‐hydroxylammonium 5,5′‐dinitro‐methyl‐3,3′‐bis(1,2,4‐oxadiazolate), which (to the best of our knowledge) shows the highest density (2.00 g cm^?3 at 92 K, 1.95 g cm^?3 at RT) ever reported for an ionic CHNO explosive. Also the corresponding bis(ammonium) salt shows an outstanding density of 1.95 g cm^?3 (173 K). The reaction of the 3,3′‐bis(1,2,4‐oxadiazolyl)‐5,5′‐bis(2,2′‐dinitro)‐diacetic acid diethyl ester with different nitrogen‐rich bases, such as ammonia, hydrazine, hydroxylamine, and triaminoguanidine causes decarboxylation followed by the formation of the corresponding salts (cation/anion stoichiometry 2:1). The reactions are performed at ambient temperature in H₂O/MeOH mixtures and furnish qualitatively pure products showing characteristics of typical secondary explosives. The obtained compounds were characterized by multinuclear NMR spectroscopy, IR and Raman spectroscopy, as well as mass spectrometry. Single‐crystal X‐ray diffraction studies were performed and the structures of all compounds were determined at low temperatures. The thermal stability was measured by differential scanning calorimetry (DSC). The sensitivities were explored by using the BAM drophammer and friction test. The heats of formation were calculated by the atomization method based on CBS‐4M enthalpies. With these values and the X‐ray densities, several detonation parameters such as the detonation pressure, velocity, energy, and temperature were computed using the EXPLO5 code.     

1,1′‐Nitramino‐5,5′‐bitetrazoles

1,1′‐Dinitramino‐5,5′‐bitetrazole and 1,1′‐dinitramino‐5,5′‐azobitetrazole were synthesized for the first time. The neutral compounds are extremely sensitive and powerful explosives. Selected nitrogen‐rich salts were prepared to adjust sensitivity and performance values. The compounds were characterized by low‐temperature X‐ray diffraction, IR and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and DTA/DSC. Calculated energetic performances using the EXPLO5 code based on calculated (CBS‐4M) heats of formation and X‐ray densities support the high performances of the 1,1′‐dinitramino‐5,5′‐bitetrazoles as energetic materials. The sensitivities toward impact, friction, and electrostatic discharge were also explored. Most of the compounds show sensitivities in the range of primary explosives and should only be handled with great care!     

Synthesis of 5‐Aminotetrazole‐1 N‐oxide and Its Azo Derivative: A Key Step in the Development of New Energetic Materials

1‐Hydroxy‐5‐aminotetrazole ( 1 ), which is a long‐desired starting material for the synthesis of hundreds of new energetic materials, was synthesized for the first time by the reaction of aqueous hydroxylamine with cyanogen azide. The use of this unique precursor was demonstrated by the preparation of several energetic compounds with equal or higher performance than that of commonly used explosives, such as hexogen (RDX). The prepared compounds, including energetic salts of 1‐hydroxy‐5‐aminotetrazole (hydroxylammonium ( 2 , two polymorphs) and ammonium ( 3 )), azo‐coupled derivatives (potassium ( 5 ), hydroxylammonium ( 6 ), ammonium ( 7 ), and hydrazinium 5,5′‐azo‐bis(1‐N‐oxidotetrazolate ( 8 , two polymorphs)), as well as neutral compounds 5,5′‐azo‐bis(1‐oxidotetrazole) ( 4 ) and 5,5′‐bis(1‐oxidotetrazole)hydrazine ( 9 ), were intensively characterized by low‐temperature X‐ray diffraction, IR, Raman, and multinuclear NMR spectroscopy, elemental analysis, and DSC. The calculated energetic performance, by using the EXPLO5 code, based on the calculated (CBS‐4M) heats of formation and X‐ray densities confirm the high energetic performance of tetrazole‐N‐oxides as energetic materials. Last but not least, their sensitivity towards impact, friction, and electrostatic discharge were explored. 5,5′‐Azo‐bis(1‐N‐oxidotetrazole) deflagrates close to the DDT (deflagration‐to‐detonation transition) faster than all compounds that have been investigated in our research group to date.     

Optimization of the HPLC enantioseparation of 3,3′‐dibromo‐5,5′‐disubstituted‐4,4′‐bipyridines using immobilized polysaccharide‐based chiral stationary phases

The HPLC enantioseparation of nine atropisomeric 3,3′,5,5′‐tetrasubstituted‐4,4′‐bipyridines was performed in normal and polar organic (PO) phase modes using two immobilized polysaccharide‐based chiral columns, namely, Chiralpak IA and Chiralpak IC. The separation of all racemic analytes, the effect of the chiral selector, and mobile phase (MP) composition on enantioseparation and the enantiomer elution order (EEO) were studied. The beneficial effect of nonstandard solvents, such as tetrahydrofuran (THF), dichloromethane (DCM), and methyl t‐butyl ether on enantioseparation was investigated. All selected 4,4′‐bipyridines were successfully enantioseparated on Chiralpak IA under normal or PO MPs with separation factors from 1.14 to 1.70 and resolutions from 1.3 to 6.5. Two bipyridines were enantioseparated at the multimilligram level on Chiralpak IA. Differently, Chiralpak IC was less versatile toward the considered class of compounds and only five bipyridines out of nine could be efficiently separated. In particular, on these columns, the ternary mixture n‐heptane/THF/DCM (90:5:5) as MP had a positive effect on enantioseparation. An interesting phenomenon of reversal of the EEO depending on the composition of the MP for the 3,3′‐dibromo‐5,5′‐bis‐(E)‐phenylethenyl‐4,4′‐bipyridine along with an exceptional enantioseparation for the 3,3′‐dibromo‐5,5′‐bis‐ferrocenylethynyl‐4,4′‐bipyridine (α = 8.33, R_s = 30.6) were observed on Chiralpak IC.     

Synthesis and Crystal Structure of 4,4′‐(Methylenediimino)bis‐1,2,5‐Oxadiazole‐3‐carboxylic Acid and Carboxamide

4,4′‐(Methylenediimino)bis‐1,2,5‐oxadiazole‐3‐carboxylic acid and 4,4′‐(methylenediimino)bis‐1,2,5‐oxadiazole‐3‐carboxamide have been synthesized by the acid‐catalyzed condensation of 4‐amino‐1,2,5‐oxadiazole‐3‐carboxylic acid and 4‐amino‐1,2,5‐oxadiazole‐3‐carboxamide with formaldehyde. The crystal and molecular structures of the compounds have been determined by X‐ray crystallography. 4,4′‐(Methylenediimino)bis‐1,2,5‐oxadiazole‐3‐carboxylic acid crystallizes in space group C2/c, and its measured density is 1.800 g/mL, significantly above the calculated value of 1.68 g/mL. 4,4′‐(Methylenediimino)bis‐1,2,5‐oxadiazole‐3‐carboxamide crystallizes in space group P2₁/c, and its measured density is 1.623 g/mL, in close agreement with the calculated value of 1.64 g/mL. The structure of the starting amide 4‐amino‐1,2,5‐oxadiazole‐3‐carboxamide has also been determined. These data, combined with literature data, suggest that ortho‐aminocarboxylic acids have unusually high densities, but the reasons for this are unclear.     

Functionalized 3,3′,5,5′‐Tetraaryl‐1,1′‐Biphenyls: Novel Platforms for Molecular Receptors

This paper describes the development of novel aromatic platforms for supramolecular construction. By the Suzuki cross‐coupling protocol, a variety of functionalized m‐terphenyl derivatives were prepared (Schemes 1–4). Macrolactamization of bis(ammonium salt) (S,S)‐ 6 with bis(acyl halide) 7 afforded the macrocyclic receptor (S,S)‐ 2 (Scheme 1), which was shown by ¹H‐NMR titration studies to form ‘nesting' complexes of moderate stability (K_a between 130 and 290 M ^?1, 300 K) with octyl glucosides 13 – 15 (Fig. 2) in the noncompetitive solvent CDCl₃. Suzuki cross‐coupling starting from 3,3′,5,5′‐tetrabromo‐1,1′‐biphenyl provided access to a novel series of extended aromatic platforms (Scheme 5) for cleft‐type (Fig. 1) and macrotricyclic receptors such as (S,S,S,S)‐ 1 . Although mass‐spectral evidence for the formation of (S,S,S,S)‐ 1 by macrolactamization between the two functionalized 3,3′,5,5′‐tetraaryl‐1,1′‐biphenyl derivatives (S,S)‐ 33 and 36 was obtained, the ¹H‐ and ¹³C‐NMR spectra of purified material remained rather inconclusive with respect to both purity and constitution. The versatile access to the novel, differentially functionalized 3,3′,5,5′‐tetrabromo‐1,1′‐biphenyl platforms should ensure their wide use in future supramolecular construction.     

New organic–inorganic frameworks incorporating iso‐ and heteropolymolybdate units and a 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium multiple hydrogen‐bond donor

Poly[bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) γ‐octamolybdate(VI) dihydrate], {(C₁₀H₁₆N₄)₂[Mo₈O₂₆]·2H₂O}_n, (I), and bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) α‐dodecamolybdo(VI)silicate tetrahydrate, (C₁₀H₁₆N₄)₂[SiMo₁₂O₄₀]·4H₂O, (II), display intense hydrogen bonding between the cationic pyrazolium species and the metal oxide anions. In (I), the asymmetric unit contains half a centrosymmetric γ‐type [Mo₈O₂₆]⁴⁻ anion, which produces a one‐dimensional polymeric chain by corner‐sharing, one cation and one water molecule. Three‐centre bonding with 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium, denoted [H₂Me₄bpz]²⁺ [N...O = 2.770 (4)–3.146 (4) Å], generates two‐dimensional layers that are further linked by hydrogen bonds involving water molecules [O...O = 2.902 (4) and 3.010 (4) Å]. In (II), each of the four independent [H₂Me₄bpz]²⁺ cations lies across a twofold axis. They link layers of [SiMo₁₂O₄₀]⁴⁻ anions into a three‐dimensional framework, and the preferred sites for pyrazolium/anion hydrogen bonding are the terminal oxide atoms [N...O = 2.866 (6)–2.999 (6) Å], while anion/aqua interactions occur preferentially viaμ₂‐O sites [O...O = 2.910 (6)–3.151 (6) Å].     

Synthesis and Thermal Behavior of a Fused,Tricyclic 1,2,3,4‐Tetrazine Ring System

This study presents the synthesis and characterization of a fused, tricyclic 1,2,3,4‐tetrazine ring system. The molecule is synthesized in a three‐step process from 5,5′‐dinitro‐bis,1,2,4‐triazole via a di‐N‐amino compound. Oxidation to form the azo‐coupled fused tricyclic 1,2,3,4‐tetrazine is achieved using tert‐butyl hypochlorite as the oxidant. The di‐N‐amino compound and the desired fused tricyclic 1,2,3,4‐triazine display interesting thermal behavior and are predicted to be high‐performance energetic materials.     

Synthesis and Thermal Behavior of a Fused,Tricyclic 1,2,3,4‐Tetrazine Ring System

This study presents the synthesis and characterization of a fused, tricyclic 1,2,3,4‐tetrazine ring system. The molecule is synthesized in a three‐step process from 5,5′‐dinitro‐bis,1,2,4‐triazole via a di‐N‐amino compound. Oxidation to form the azo‐coupled fused tricyclic 1,2,3,4‐tetrazine is achieved using tert‐butyl hypochlorite as the oxidant. The di‐N‐amino compound and the desired fused tricyclic 1,2,3,4‐triazine display interesting thermal behavior and are predicted to be high‐performance energetic materials.     

Potassium 4,4′‐Bis(dinitromethyl)‐3,3′‐azofurazanate: A Highly Energetic 3D Metal–Organic Framework as a Promising Primary Explosive

Environmentally acceptable alternatives to toxic lead‐based primary explosives are becoming increasingly important for energetic materials. In this study, potassium 4,4′‐bis(dinitromethyl)‐3,3′‐azofurazanate, comprising two dinitromethyl groups and an azofurazan moiety, was synthesized and isolated as a new energetic 3D metal–organic framework (MOF). Several attractive properties, including a density of 2.039 g cm^?3, a decomposition temperature of 229 °C, a detonation velocity of 8138 m s^?1, a detonation pressure of 30.1 GPa, an impact sensitivity of 2 J, and friction sensitivity of 20 N make 4 a good candidate as a green primary explosive.     

Polycyclic N‐Heterocyclic Compounds. Part 84: Reaction of N‐(pyrido[3′,2′:4,5]thieno[3,2‐d]pyrimidin‐4‐yl)amidines or N‐(pyrido[2′,3′:4,5]furo[3,2‐d]pyrimidin‐4‐yl)amidines with Hydroxylamine Hydrochloride

The reactions of nine N‐(pyrido[3′,2′:4,5]thieno[3,2‐d]pyrimidin‐4‐yl)amidines ( 3 ) with hydroxylamine hydrochloride produced new cyclization products. These were formed via ring cleavage of the pyrimidine component followed by a 1,2,4‐oxadiazole‐forming ring closure to give N‐[2‐([1,2,4]oxadiazol‐5‐yl)thieno[2,3‐b]pyridin‐3‐yl]formamide oximes ( 11 ). Reaction of six N‐(pyrido[2′,3′:4,5]furo[3,2‐d]pyrimidin‐4‐yl)amidines ( 12 ) with hydroxylamine hydrochloride gave similar results. Effects of the newly synthesized compounds on pentosidine formation were also evaluated.