Enantioselective Cyanosilylation of Ketones with Lithium(I) Dicyanotrimethylsilicate(IV) Catalyzed by a Chiral Lithium(I) Phosphoryl Phenoxide

A highly enantioselective cyanosilylation of ketones was developed by using a chiral lithium(I) phosphoryl phenoxide aqua complex as an acid/base cooperative catalyst. The pentacoordinate silicate generated in situ from Me₃SiCN/LiCN acts as an extremely reactive cyano reagent. Described is a 30 gram scale reaction and the synthesis of the key precursor to (+)‐13‐hydroxyisocyclocelabenzine.     

Reaction of Lithium Tantalate (Niobate) with Lithium Carbonate

Reactions of crushed wastes from lithium tantalate (niobate) production with lithium carbonate were studied by thermal and X-ray analyses. Conditions for their most complete conversion into lithium orthotantalate (orthoniobate) were determined.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 1, 2005, pp. 21–24.Original Russian Text Copyright © 2005 by Masloboeva, Tikhomirova, Masloboev, Arutyunyan.     

Lithium and sodiumtris(trimethylsilyl)silanolates. Synthesis and reactivity

Lithium and sodium tris(trimethylsilyl)silanolates were obtained by the reaction of tris(trimethylsilyl)silanol with BuⁿLi or PrⁱONa in hexane. The degree of association of silanolates in benzene solution was found to be 2 and 4 for the sodium and lithium derivatives, respectively. (Me₃Si)₃SiONa is noticeably more active than the lithium derivative in the reaction with Me₃SiCl. Tris(trimethylsilyl)silanol reacts with trimethylchlorosilane to give (Me₃Si)₃SiCl. The hydrolysis of (Me₃Si)₃SiONa (Li) in benzene and hexane yields the corresponding silanol, whereas in HMPA the splitting of Si-Si bonds and hydrogen evolution were observed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1146–1149, June, 1995.This work was carried out with financial support from the International Scientific and Technical Center (Project No 015-94).     

t-Butyldiphenylsilyl-Lithium and Lithium Bis(t-Butyldiphenylsilyl)Cuprate. New Silylating Reagents

t-Butyldiphenylsilyl-lithium reacts with carbonyl derivatives to give α -hydroxysilanes in high yields. Lithium bis (t-butyldiphenylsilyl)cuprate reacts with α, β-unsaturated ketones and esters and with acyl chlorides to give β-silylcarbonyl1 compounds and acylsilanes. β-t-Butyldiphenylsilylketones are masked α, β-unsaturated ketones.     

Über Chalkogenolate. 179. Kupfer(I)-thioxanthate und Thioxanthatocuprate(I)

On Chalcogenolates. 179. Copper(I) Thioxanthates and Thioxanthatocuprates(I) Copper(I) thioxanthates Cu[S₂C? SR], where R = C₂H₅, ⁿC₄H₉, and CH₂? C₆H₅, have been prepared by two procedures and studied by means of diverse methods. They are soluble in ethanolic and acetonic solutions containing the corresponding [S₂C? SR]^? ions in excess to yield thioxanthatocuprates(I) [Cu_n(S₂C? SR)_n+1]^?. The compounds [(C₆H₅)₄P][Cu_n(S₂C? SC₂H₅)_n+1] with n = 1, 4, 6 have been isolated. The existence of [(C₆H₅)₄P][Cu₄(S₂C? SC₄H₉)₅] and [(C₆H₅)₄P][Cu₆(S₂C? SCH₂? C₆H₅)₇] has been ascertained.     

Polysulfonylamine. XL Darstellung von Silber(I)-disulfonylamid-Acetonitril-Komplexen. Röntgenstrukturanalytische und thermochemische Charakterisierung von Tetraacetonitrilsilber(I)-bis(dimesylamido)argentat(I) und von (1,1,3,3-Tetraoxo-1,3,2-benzodithiazolido)acetonitrilsilber(I)

Polysulfonyl Amines. XL. Preparation of Silver(I) Disulfonylamide Acetonitrile Complexes. Characterization of Tetraacetonitrilesilver(I) bis(dimesylamido)argentate(I) and (1,1,3,3-Tetraoxo-1,3,2-benzodithiazolido)acetonitrilesilver(I) by X-Ray Diffractometry and Thermal Analysis The following silver(I) disulfonylamides were prepared for the first time or by improved procedures: AgN(SO₂CH₃)₂ ( 2a ); AgN(SO₂C₆H₄-4-X)₂ with X = F ( 2b ), Cl ( 2c ), Br ( 2d ), CH₃ ( 2e ); silver(I) 1,2-benzenedisulfonimide AgN(SO₂)₂C₆H₄ ( 2f ). With acetonitrile, the salts 2a to 2e form (1/2) complexes AgN(SO₂R)· 2 CH₃CN ( 4a to 4e ), whereas 2f gives the (1/1) complex AgN(SO₂)₂C₆H · CH₃CN ( 4f ). The crystallographic data (at - 95°C) for the title compounds 4a and 4f are: 4a , space group C2/c, a = 1 967.6(4), b = 562.2(1), c = 2 353.0(5) pm, β = 102.21(2)°, V = 2.5440 nm³, Z = 4, D_x = 1.891 Mg m^?3; 4f , space group P2₁/m, a = 741.5(3), b = 980.4(4), c = 756.6(3) pm, β = 99.28(2)°, V = 0.5428 nm³, Z = 2, D_x = 2.246 Mg m^?3. 4a forms an ionic crystal [Ag(NCCH₃)₄]^⊕[Ag{N(SO₂CH₃)₂}₂]^? with a tetrahedrally coordinated silver atom (lying on a twofold axis) in the cation (225.3/225.7 pm for the two independent Ag? N distances, N? Ag? N 106.2—114.5°) and a linear-dicoordinated silver atom in the centrosymmetric anion (Ag? N 213.9 pm, two intraionic secondary Ag…O contacts 303.4 pm). 4f consists of uncharged molecules [C₆H₄(SO₂)₂N¹AgN²CCH₃] with crystallographic mirror symmetry (Ag? N¹ 218.8, Ag? N² 216.1 pm, N¹? Ag? N² 174.3°), associated into strands by intermolecular secondary silver-oxygen contacts (Ag…O 273.8 pm, O…Ag…O 175.6, N? Ag…O 91.9/88.2°). The thermochemical behaviour of 4f was investigated using thermogravimetry, differential scanning calorimetry (DSC), time- and temperature-resolved X-ray diffractometry (TXRD), and solution calorimetry. The desolvation process occurs in the temperature range from 60 to 200°C and appears to be complex, although no crystalline intermediate could be detected. The desolvation enthalpy at 298 K was found to be + 26.8(4) kJ mol^?1. 4a is desolvated in two steps at - 15 to 60°C and 60 to 95°C (DSC), suggesting the formation of AgN(SO₂CH₃) · CH₃CN as an intermediate.     

Alkylidentriphenylphosphoran-komplexe von kupper(I)- und silber(I)-chlorid: I. 21 komplexe

Ylide complexes of the type [(C₆H₅)₃PCHRMCHRP(C₆H₅)₃]Cl (M = Cu, Ag) have been obtained from the reaction of methylene, ethylidene- and isobutylidene-triphenylphosphorane with CuCl and AgCl. These organocopper and organosilver compounds are of surprisingly high thermal stability. In the ¹H, ¹³C and ³¹P NMR spectra of the silver compound (R = H) the spin—spin interactions ¹HC^107,109 Ag, ³¹PC^107,109 Ag, and for the first time, ¹³C^107,109 Ag could be detected.     

Highly luminescent gold(I)-silver(I) and gold(I)-copper(I) chalcogenide clusters

The reactions of [AuClL] with Ag(2)O, where L represents the heterofunctional ligands PPh(2)py and PPh(2)CH(2)CH(2)py, give the trigoldoxonium complexes [O(AuL)(3)]BF(4). Treatment of these compounds with thio- or selenourea affords the triply bridging sulfide or selenide derivatives [E(AuL)(3)]BF(4) (E=S, Se). These trinuclear species react with Ag(OTf) or [Cu(NCMe)(4)]PF(6) to give different results, depending on the phosphine and the metal. The reactions of [E(AuPPh(2)py)(3)]BF(4) with silver or copper salts give [E(AuPPh(2)py)(3)M](2+) (E=O, S, Se; M=Ag, Cu) clusters that are highly luminescent. The silver complexes consist of tetrahedral Au(3)Ag clusters further bonded to another unit through aurophilic interactions, whereas in the copper species two coordination isomers with different metallophilic interactions were found. The first is analogous to the silver complexes and in the second, two [S(AuPPh(2)py)(3)](+) units bridge two copper atoms through one pyridine group in each unit. The reactions of [E(AuPPh(2)CH(2)CH(2)py)(3)]BF(4) with silver and copper salts give complexes with [E(AuPPh(2)CH(2)CH(2)py)(3)M](2+) stoichiometry (E=O, S, Se; M=Ag, Cu) with the metal bonded to the three nitrogen atoms in the absence of AuM interactions. The luminescence of these clusters has been studied by varying the chalcogenide, the heterofunctional ligand, and the metal.     

Quecksilberverbindungen mit Cyancarbanionen. I. Synthese und Kristallstruktur von Diquecksilber(I)-bis(tricyanmethanid)

Mercury Compounds with Cyancarbanions. I . Synthesis and Crystal Structure of Dimercury(I)-bis(tricyanmethanide ) With the triclinic unit cell, space group P1 , with the lattice constants a = 5.2794(1) Å, b = 9.9279(1) Å, c = 11.3376(2) Å, α = 71.004(4)°, β = 76.459(2)° and γ = 74.601(4)° are two formula units. The three-dimensional network, which characterizes the structure, results from dimercury(I) ions with sp³ hybridization, which form beside the homonuclear metal bonding three covalent bonds to cyanonitrogen atoms. The tricyanmethanide ion acts by losing symmetry as a tridentate ligand.     

63Cu-NMR.-Untersuchungen von Kupfer (I)-Tetrapyridin-und Kupfer (I)-Tetraacetonitrilsolvaten

⁶³Cu-NMR.-Spectra of Cu(CH₃CN)₄X (X = ClO, BF, PF) and Cu(C₅H₅N)₄X (X = ClO, BF) in solution are reported at different temperatures and concentrations. The influence of temperature on the linewidth and chemical shift indicates an equilibrium of Cu(CH₃CN) and Cu(C₅H₅N) with another complex of lower symmetry. The preferential solvation of Cu (I) by pyridin in a mixture acetonitrile/pyridine is clearly shown.     

Stabile Quecksilber(I)-Schwefel-Verbindungen. II. Die Kristallstruktur des 1,3-Dithian-diquecksilber(I)-dinitrats

Stable Mercury (I)-Sulfur Compounds. II. Crystal Structure of 1,3-Dithiane-dimercury(I) Dinitrate The product of the reaction of methanolic solutions of 1,3-Dithiane and Dimercury(I) dinitrate, the addukt (C₄H₈S₂Hg₂)(NO₃)₂, crystallizes monoclinic (a = 697.0 ± 0.5 pm, b = 1 520.5 ± 0.8 pm, c = 1 118.5 ± 0.8 pm, β = 96 ± 0.6deg;) in the space group P 2₁/c—C (Nr. 14) with Z = 4. The X-ray structure has been determined using Fourier methods and refined by least-squares to an R-value of 0.068. The results show that the compound exists as a chain structure of with nitrate ions connecting the chains.     

Organosilane polymers. I. Poly(dimethylsilylene)

Poly(dimethylsilylene) higher polymers prepared by alkali metal coupling of purified dimethyldichlorosilane were found to be high melting, largely crystalline polymers, soluble in solvents at temperatures above 200°C.