The Enhancement on Proton Conductivity of Stable Polyoxometalate‐Based Coordination Polymers by the Synergistic Effect of MultiProton Units

Two novel polyoxometalate (POM)‐based coordination polymers, namely, [Co(bpz)(Hbpz)][Co(SO₄)_0.5(H₂O)₂(bpz)]₄ [PMo^VI₈Mo^V₄V^IV₄O₄₂]?13 H₂O ( NENU‐530 ) and [Ni₂(bpz)(Hbpz)₃(H₂O)₂][PMo^VI₈Mo^V₄V^IV₄O₄₄]?8 H₂O ( NENU‐531 ) (H₂bpz=3,3′,5,5′‐tetramethyl‐4,4′‐bipyrazole), were isolated by hydrothermal methods, which represented 3D networks constructed by POM units, the protonated ligand and sulfate group. In contrast with most POM‐based coordination polymers, these two compounds exhibit exceptional excellent chemical and thermal stability. More importantly, NENU‐530 shows a high proton conductivity of 1.5×10^?3 S cm^?1 at 75 °C and 98 % RH, which is one order of magnitude higher than that of NENU‐531 . Furthermore, structural analysis and functional measurement successfully demonstrated that the introduction of sulfate group is favorable for proton conductivity. Herein, the syntheses, crystal structures, proton conductivity, and the relationship between structure and property are presented.     

Enhanced and Optically Switchable Proton Conductivity in a Melting Coordination Polymer Crystal

The melting behavior of a coordination polymer (CP) crystal was utilized to achieve enhanced and optically switchable proton conductivity in the solid state. The strong acid molecules (triflic acid) were doped in one‐dimensional (1D) CP, [Zn(HPO₄)(H₂PO₄)₂](ImH₂)₂ (ImH₂=monoprotonated imidazole) in the melt state, and overall enhancement in the proton conductivity was obtained. The enhanced proton conductivity is assigned to increased number of mobile protons and defects created by acid doping. Optical control over proton conductivity in the CP is achieved by doping of the photo acid molecule pyranine into the melted CP. The pyranine reversibly generates the mobile acidic protons and local defects in the glassy state of CP resulting in the bulk switchable conductivity mediated by light irradiation. Utilization of CP crystal in liquid state enables to be a novel route to incorporate functional molecules and defects, and it provides a tool to control the bulk properties of the CP material.     

Proton Conduction in a Single Crystal of a Phosphonato-Sulfonate-Based Coordination Polymer: Mechanistic Insight

The proton conduction properties of a phosphonato-sulfonate-based coordination polymer are studied by impedance spectroscopy using a single crystal specimen. Two distinct conduction mechanisms are identified. Water-mediated conductance along the crystal surface occurs by mass transport, as evidenced by a high activation energy (0.54 eV). In addition, intrinsic conduction by proton ′hopping′ through the interior of the crystal with a low activation energy (0.31 eV) is observed. This latter conduction is anisotropic with respect to the crystal structure and seems to occur through a channel along the c axis of the orthorhombic crystal. Proton conduction is assumed to be mediated by sulfonate groups and non-coordinating water molecules that are part of the crystal structure.     

Lanthanide‐Based Layer‐Type Two‐Dimensional Coordination Polymers Featuring Slow Magnetic Relaxation,Magnetocaloric Effect and Proton Conductivity

Three lanthanide‐based two‐dimensional (2D) coordination polymers (CPs), [Ln(L)(H₂O)₂]_n, {H₃L=(HO)₂P(O)CH₂CO₂H; Ln=Dy³⁺ (CP 1 ), Er³⁺ (CP 2 )} and [{Gd₂(L)₂(H₂O)₃}^.H₂O]_n, (CP 3 ) were hydrothermally synthesized using phosphonoacetic acid as a linker. Structural features revealed that the dinuclear Ln³⁺ nodes were present in the 2D sheet of CP 1 and CP 2 while in the case of CP 3 , nodes were further connected to each other forming a chain‐type arrangement throughout the network. The magnetic studies show field‐induced slow magnetic relaxation property in CP 1 and CP 2 with U_eff values of 72 K (relaxation time, τ₀=3.05×10^?7 s) and 38.42 K (relaxation time, τ₀=4.60×10^?8 s) respectively. Ab‐initio calculations suggest that the g tensor of Kramers doublet of the lanthanide ion (Dy³⁺ and Er³⁺) is strongly axial in nature which reflects in the slow magnetic relaxation behavior of both CPs. CP 3 exhibits a significant magnetocaloric effect with ?ΔS_m=49.29 J kg^?1 K^?1, one of the highest value among the reported 2D CPs. Moreover, impedance analysis of all the CPs show high proton conductivity with values of 1.13×10^?6 S cm^?1, 2.73×10^?3 S cm^?1 and 2, 6.27×10^?6 S cm^?1 for CPs 1 – 3 , respectively, at high temperature (>75 °C) and maximum 95 % relative humidity (RH).     

Anhydrous Silicophosphoric Acid Glass: Thermal Properties and Proton Conductivity

Anhydrous silicophosphoric acid glass with an approximate composition of H₅Si₂P₉O₂₉ was synthesized and its thermal and proton-conducting properties were characterized. Despite exhibiting a glass transition at 192 °C, the supercooled liquid could be handled as a solid up to 280 °C owing to its high viscosity. The glass and its melt exhibited proton conduction with a proton transport number of ∼1. Although covalent O−H bonds were weakened by relatively strong hydrogen bonding, the proton conductivity (4×10⁻⁴ S cm⁻¹ at 276 °C) was considerably lower than that of phosphoric acid. The high viscosity of the melt was due to the tight cross-linking of phosphate ion chains by six-fold-coordinated Si atoms. The low proton conductivity was attributed to the trapping of positively charged proton carriers around anionic SiO₆ units (expressed as (SiO_6/2)²⁻) to compensate for the negative charges.     

一个锰的二维配位聚合物的合成及其性质

本文用2-咪唑乙酸(Hiaa),2,2′-联吡啶,氢氧化钠和六水合高氯酸锰在水和乙醇中反应合成了1个二维配位化合物{[Mn(iaa)(2,2′-bipyridine)(H₂O)](ClO₄)}_n (1)。单晶结构表明化合物1是1个新颖的二维双核锰配位聚合物,锰离子的配位构型为扭曲的八面体。每一个锰离子与3个配体配位,而每个配体与3个锰离子桥连。磁性研究表明1中Mn(Ⅱ)离子间存在弱的反     

Flexibility Control of Two-Dimensional Coordination Polymers by Crystal Morphology: Water Adsorption and Thermal Expansion

Layer flexibility in two-dimensional coordination polymers (2D-CPs) contributes to several functional materials as it results in anisotropic structural response to external stimuli. Chemical modification is a common technique for modifying layer structures. This study demonstrates that crystal morphology of a cyanide-bridged 2D-CP of type [Mn(salen)]₂[ReN(CN)₄] ( 1 ) consisting of flexible undulating layers significantly impacts the layer configuration and assembly. Nanoplates of 1 showed an in-plane contraction of layers with a longer interlayer distance compared to the micrometer-sized rod-type particles. These effects by crystal morphology on the structure of the 2D-CP impacted the structural flexibility, resulting in dual-functional changes: the enhancement of the sensitivity of structural transformation to water adsorption and modification of anisotropic thermal expansion of 1 . Moreover, the nanoplates incorporated new adsorption sites within the layers, resulting in the uptake of an additional water molecule compared to the micrometer-sized rods.     

Synthesis and Crystal Structure of a Three-dimensional Cobalt Coordination Polymer Assembled by Ozagrel Ligands

A three-dimensional cobalt coordination polymer [Co(IMPAA)2]n(1, HIMPAA =(2E)-3-[4-(1H-imidazol-1-ylmethyl)phenyl]acrylic acid) was synthesized with ozagrel and structurally characterized by element analysis, IR, PXRD, TGA and X-ray diffraction. Complex 1 is of monoclinic system, space group P21 with a = 5.136(4), b = 25.577(19), c = 8.174(6) ?, V = 1078.6(14) ?3, Mr = 513.41, Z = 2, Dc = 1.581 g/cm3, F(000) = 686, μ = 0.840 mm-1, S = 1.119, Rint = 0.0637 and w R = 0.1456. In complex 1, four IMPAA- and four Co(II) ions form a S-shaped 52-membered macrocycle [Co4(IMPAA)4]4+. Two carboxlate oxygen atoms link the macrocycles to form a one-dimensional chain. IMPAA- ligands bridge one-dimensional chains to yield a novel three-dimensional metal-organic framework(MOFs). The complex is stable up to 350 ℃.     

一个二维钴配位聚合物的合成、结构及光催化性质

以N,N'-二(3-吡啶基)-吡啶-3,5-二甲酰胺(bppdca)和2-巯乙酸基烟酸(L)为混合配体,利用水热合成方法获得了一个二维的Co(Ⅱ)配位聚合物:{[Co(bppdca)(L)]·3H₂O}_n,并通过元素分析、IR和单晶X射线衍射等技术手段确定了其结构。该配合物分子式为C₂₅H₂₄N₆O₉SCo,单斜晶系,P2₁/c空间群,a=1.07419(9) nm,b=0.86166(6) nm,c=2.9853(2) nm,β=96.772(1)°,Z=4,V=2.743 9(4) nm³,M_r=643.49,D_c=1.558 g/cm³,F(000)=1324,μ=0.766 mm^-1,S=1.051,R=0.0406,wR=0.1160。 晶体结构分析表明,配合物中的CoⅡ与来自2个bppdca配体的2个N原子、1个L阴离子的单齿羧基O原子和S原子以及来自另一个L阴离子的一个羧基中的2个O原子配位形成八面体配位构型。 相邻的Co^Ⅱ通过L阴离子连接成一维螺旋链[Co(L)]_n,相邻的左、右螺旋链通过成对的bppdca配体拓展成二维配位网络。 最终,相互平行的二维网络通过氢键作用拓展成三维超分子框架。 另外,还研究了该化合物的热稳定性、电化学性质、荧光性质以及选择性光催化性质。CCDC: 1010786     

Flexural Properties of Glass Fibre Reinforced Composite with Partially Biodegradable Polymer Matrix

Summary: The aim of this study was to evaluate flexural properties of a partially biodegradable glass fibre reinforced composite after water immersion and dehydration. In addition water sorption and solubility was determined. E-glass fibres were preimpregnated with a biodegradable biopolymer of poly(hydroxyproline) amide (PA). The preimpregnated fibres were then further-impregnated with Bis-GMA–TEGDMA-resin and light polymerized (n = 6). There was also specimen made of plain polymer and FRC without PA. After water immersion and/or dehydration, the specimens were tested by the three-point bending test. The flexural strength and Young's modulus was increased in most cases after water immersion and dehydration except for PA containing specimens. The water sorption was <50 µg/mm³ for all studied specimens and solubility was 20 µg/mm³ for specimens without PA and 35 µg/mm³ for specimens with PA.     

A Dual‐Ligand Porous Coordination Polymer Chemiresistor with Modulated Conductivity and Porosity

Single‐ligand‐based electronically conductive porous coordination polymers/metal–organic frameworks (EC‐PCPs/MOFs) fail to meet the requirements of numerous electronic applications owing to their limited tunability in terms of both conductivity and topology. In this study, a new 2D π‐conjugated EC‐MOF containing copper units with mixed trigonal ligands was developed: Cu₃(HHTP)(THQ) (HHTP=2,3,6,7,10,11‐hexahydrotriphenylene, THQ=tetrahydroxy‐1,4‐quinone). The modulated conductivity (σ≈2.53×10^?5 S cm^?1 with an activation energy of 0.30 eV) and high porosity (ca. 441.2 m² g^?1) of the Cu₃(HHTP)(THQ) semiconductive nanowires provided an appropriate resistance baseline and highly accessible areas for the development of an excellent chemiresistive gas sensor.     

pH and Salt-Assisted Macroscopic Chirality Inversion of Gadolinium Coordination Polymer

The precise adjustment of handedness of helical architectures is important to regulate their functions. Macroscopic chirality inversion has been achieved in organic supramolecular systems by pH, metal ions, solvents, chiral and non-chiral additives, temperature, and light, but rarely in coordination polymers (CPs). In particular, salt-assisted macroscopic chirality inversion has not been reported. In this work, we carried out a systematic investigation on the role of pH and salt in regulating the morphology of CPs based on Gd(NO₃)₃ and R-(1-phenylethylamino)methylphosphonic acid (R-pempH₂). Without extra NO₃⁻, the chirality inversion from the left-handed superhelix R-M to the right-handed superhelix R-P can be achieved by pH modulation from 3.2 to 3.8. The addition of NaNO₃ (2.0 eq) at pH 3.8 results in an inversion of chiral sense from R-P to R-M as a pure phase. To our knowledge, this is the first example of salt-assisted macroscopic helical inversion in artificial systems.     

The Mechanical Strength of a Mechanical Bond: Sonochemical Polymer Mechanochemistry of Poly(catenane) Copolymers

Topological molecular connections and structures, including physical entanglements in polymer networks, knots along polymer chains, and rotaxanes in sliding ring gels, have important consequences for the physical properties of polymeric materials. Often these topologies contribute through their ability to bear mechanical stress, but experimental measures of their relative mechanical strength are rare. Here, we use sonochemical polymer mechanochemistry to assess the relative mechanical strength of a multicatenane copolymer relative to copolymers of cyclic and linear analogs. The relative mechanical strengths are obtained by comparing the limiting molecular weights (M_lim) and contour lengths (L_lim) of the polymers under pulsed ultrasound of their dilute solutions. The values of M_lim and L_lim, and thus the inferred mechanical strengths of the polymers, are effectively identical. The mechanical bonds of the catenanes are therefore as strong, or stronger, mechanically as the covalent bonds along the polymer backbone.