Drug release and biocompatibility of self‐assembled micelles prepared from poly (ɛ‐caprolactone/glycolide)‐poly (ethylene glycol) block copolymers

A series of poly(?‐caprolactone/glycolide)‐poly(ethylene glycol) (P(CL/GA)‐PEG) diblock copolymers were prepared by ring opening polymerization of a mixture of ?‐caprolactone and glycolide using mPEG as macro‐initiator and stannous octoate as catalyst. Self‐assembled micelles were prepared from the copolymers using nanoprecipitation method. The micelles were spherical in shape. The micelle size was larger for copolymers with longer PEG blocks. In contrast, the critical micelle concentration of copolymers increased with decreasing the overall hydrophobic block length. Drug loading and drug release studies were performed under in vitro conditions, using paclitaxel as a hydrophobic model drug. Higher drug loading was obtained for micelles with longer poly(ε‐caprolactone) blocks. Faster drug release was obtained for micelles of mPEG2000 initiated copolymers than those of mPEG5000 initiated ones. Higher GA content in the copolymers led to faster drug release. Moreover, drug release rate was enhanced in the presence of lipase from Pseudomonas sp., indicating that drug release is facilitated by copolymer degradation. The biocompatibility of copolymers was evaluated from hemolysis, dynamic clotting time, and plasma recalcification time tests, as well as MTT assay and agar diffusion test. Data showed that copolymer micelles present outstanding hemocompatibility and cytocompatibility, thus suggesting that P(CL/GA)‐PEG micelles are promising for prolonged release of hydrophobic drugs.     

Fabrication of Reduction‐Sensitive Amphiphilic Cyclic Brush Copolymer for Controlled Drug Release

The cyclic brush polymers, due to the unique topological structure, have shown in the previous studies higher delivery efficacy than the bottlebrush analogues as carriers for drug and gene transfer. However, to the best of knowledge, the preparation of reduction‐sensitive cyclic brush polymers for drug delivery applications remains unexplored. For this purpose, a reduction‐sensitive amphiphilic cyclic brush copolymer, poly(2‐hydroxyethyl methacrylate‐g‐poly(ε‐caprolactone)‐disulfide link‐poly(oligoethyleneglycol methacrylate)) (P(HEMA‐g‐PCL‐SS‐POEGMA)) with reducible block junctions bridging the hydrophobic PCL middle layer and the hydrophilic POEGMA outer corona is designed and synthesized successfully in this study via a “grafting from” approach using sequential ring‐opening polymerization (ROP) and atom transfer free radical polymerization (ATRP) from a cyclic multimacroinitiator PHEMA. The resulting self‐assembled unimolecular core–shell–corona (CSC) micelles show sufficient salt stability and efficient destabilization in the intracellular reducing environment for a promoted drug release toward a greater therapeutic efficacy relative to the reduction‐insensitive analogues. The overall results demonstrate the reducible cyclic brush copolymers developed herein provides an elegant solution to the tradeoff between extracellular stability and intracellular high therapeutic efficacy toward efficient anticancer drug delivery.     

Folate‐Conjugated and Dual Stimuli‐Responsive Mixed Micelles Loading Indocyanine Green for Photothermal and Photodynamic Therapy

A folic acid targeted mixed micelle system based on co‐assembly of poly(ε‐caprolactone)‐b‐poly(methoxytri(ethylene glycol) methacrylate‐co‐N‐(2‐methacrylamido)ethyl folatic amide) and poly(ε‐caprolactone)‐b‐poly(diethylene glycol monomethyl ether methacrylate) is developed to encapsulate indocyanine green (ICG) for photothermal therapy and photodynamic therapy. In this study, the use of folic acid is not only for specific cancer cell recognition, but also in virtue of the carboxylic acid on folic acid to regulate the pH‐dependent thermal phase transition of polymeric micelles for controlled drug release. The prepared ICG‐loaded mixed micelles possess several superior properties such as a preferable thermoresponsive behavior, excellent storage stability, and good local hyperthermia and reactive oxygen species generation under near‐infrared (NIR) irradiation. The photototoxicity induced by the ICG‐loaded micelles has efficiently suppressed the growth of HeLa cells (folate receptor positive cells) under NIR irradiation compared to that of HT‐29, which has low folate receptor expression. Hence, this new type of mixed micelles with excellent features could be a promising delivery system for controlled drug release, effective cancer cell targeting, and photoactivated therapy.     

Thermo/pH Dual Responsive Mixed‐Shell Polymeric Micelles Based on the Complementary Multiple Hydrogen Bonds for Drug Delivery

Thermo/pH dual responsive mixed‐shell polymeric micelles based on multiple hydrogen bonding were prepared by self‐assembly of diaminotriazine‐terminated poly(?‐caprolactone) (DAT‐PCL), uracil‐terminated methoxy poly(ethylene glycol) (MPEG‐U), and uracil‐terminated poly(N‐vinylcaprolactam) (PNVCL‐U) at room temperature. PCL acted as the core and MPEG/PNVCL as the mixed shell. Increasing the temperature, PNVCL collapsed and enclosed the PCL core, while MPEG penetrated through the PNVCL shell, thereby leading to the formation of MPEG channels on the micelles surface. The low cytotoxicity of the mixed micelles was confirmed by an MTT assay against BGC‐823 cells. Studies on the in vitro drug release showed that a much faster release rate was observed at pH 5.0 compared to physiological pH, owing to the dissociation of hydrogen bonds. Therefore, the mixed‐shell polymeric micelles would be very promising candidates in drug delivery systems.     

Synthesis and characterization of poly(ethylene glycol)‐based thermo‐responsive polyurethane hydrogels for controlled drug release

The thermo‐responsiveness, swelling and mechanical properties of a series of novel poly(ester‐ether urethane) hydrogels have been investigated. These thermo‐sensitive hydrogels were obtained by combining hydrophobic biodegradable poly(ε‐caprolactone) diols and hydrophilic two‐, three‐ and four‐arm hydroxyl terminated poly(ethylene glycol) (PEG) of various molecular weights, using hexamethylene diisocyanate, dichloroethane as solvent and a tin‐based catalyst. The use of multifunctional PEGs leads to the formation of covalent crosslinking points allowing an additional control of the swelling capability. Thus, it was found that tuning the hydrophilic/hydrophobic balance and the crosslinking degree by changing the composition, the swelling and the thermo‐responsive behavior of these hydrogels could be modulated. The obtained hydrogels showed a volume transition at around room temperature. Therefore, and taking into account their biocompatibility, these hydrogels show promising properties for biomedical applications, such as drug delivery. Thus, the loading and release of diltiazem hydrochloride, an antihypertensive drug used as model, were investigated. These new PEG polyurethane hydrogels were able to incorporate a high amount of drug providing a sustained release after an initial burst effect. Copyright © 2013 John Wiley & Sons, Ltd.     

Relationship among drug delivery behavior,degradation behavior and morphology of copolylactones derived from glycolide,l‐lactide and ε‐caprolactone

A series of copolylactones was synthesized by ring‐opening copolymerization of glycolide, L ‐lactide and ?‐caprolactone, using stannous octoate as catalyst. The in vitro degradation behaviors of them were studied and data demonstrated different degradation rates which mainly depended on the compositions. Investigation of the 5‐fluorouracil (5‐Fu) release from these copolylactones revealed that the composition, degradation rate and the morphology of the polymeric matrix played an important role on the drug release kinetics. A sustained 5‐Fu release without initial time lag was obtained from random poly(lactide‐co‐glycolide‐co‐caprolactone) (r‐PGLC) drug carrier, and it differed from the cases of polylactide (PLA) or random poly(lactide‐co‐glycolide) (PLGA), which usually showed an initial time lag or biphasic drug release behavior. It was due to the low glass transition temperature (T _g) of the r‐PGLC and the drug would diffuse faster in rubbery state under the experimental temperature. Furthermore, a significant change in the drug release behavior of r‐PGLC was observed when the temperatures were changed around the T _g of the drug carrier, which implied that the drug release behavior could be regulated by adjusting the morphology of the drug carrier. Copyright © 2002 John Wiley & Sons, Ltd.     

Efficient synthesis of ionic triblock copolyesters and facile access to charge‐reversal hybrid micelles

Novel carboxyl‐ and amino‐functionalized copolyesters, based on poly(ε‐caprolactone)‐block‐poly(butylene fumarate)‐block‐poly(ε‐caprolactone), were efficiently synthesized via Michael‐type thiol‐ene click chemistry. The resulting amphiphilic copolyesters with controllable molecular weights and abundant positively or negatively charged groups could spontaneously form pH‐sensitive micelles in aqueous solutions, as confirmed by transmission electron microscopy, dynamic light scattering, fluorescence probing technique, and zeta potential analyses. Importantly, charge‐reversal hybrid micelles can be obtained by co‐assembly of carboxyl‐ and amino‐functionalized copolyesters. The surface charges of hybrid micelles reversed rapidly from negative to positive at isoelectric point via protonation of surface carboxyl and amino groups. Interestingly, the hybrid micelles showed apparent pH‐triggered Nile red‐release behavior in acidic condition resembling tumor intracellular environment, which is fairly desirable for drug delivery. Our work indicates that co‐assembly is a facile but efficient way to prepare charge‐reversal micelles, which have great potential to be used as intelligent drug delivery systems for cancer therapy. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1259–1267     

Synthesis and characterization of a biodegradable amphiphilic copolymer based on branched poly(ϵ‐caprolactone) and poly(ethylene glycol)

A novel biodegradable amphiphilic copolymer with hydrophobic poly(ε‐caprolactone) branches containing cholic acid moiety and a hydrophilic poly(ethylene glycol) chain was synthesized. The copolymer was characterized by FTIR, ¹H NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), polarizing light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD) analysis. The amphiphilic copolymer could self‐assemble into micelles in an aqueous solution. The critical micelle concentration of the amphiphilic copolymer was determined by fluorescence spectroscopy. A nanoparticle drug delivery system with a regularly spherical shape was prepared with high encapsulation efficiency. The in vitro drug release from the drug‐loaded polymeric nanoparticles was investigated. Because of the branched structure of the hydrophobic part of the copolymer and the relatively fast degradation rate of the copolymer, an improved release behavior was observed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5256–5265, 2007     

聚碳酸酯修饰多壁碳纳米管的制备和表征

为了制备聚合物/碳纳米管复合物,采用聚碳酸酯修饰了多壁碳纳米管。选择聚碳酸环氧丙烷己内酯,聚碳酸亚丁酯己内酯和聚碳酸亚丙酯马来酸酐酯三种聚碳酸酯修饰多壁碳纳米管,仅仅碳酸环氧丙烷己内酯修饰的碳纳米管复合物可分离得到可溶解性产物。分别采用红外光谱、扫描电镜和透射电镜表征了碳纳米管的表面修饰基团及形貌。热重分析表明,可溶解聚碳酸环氧丙烷己内酯修饰多壁碳纳米管相对接枝了较多的聚合物,因此促进了碳纳米管的溶解性,可能是因为聚碳酸环氧丙烷己内酯具有较多的端羟基提高了修饰接枝效果。可溶解聚碳酸环氧丙烷己内酯修饰多壁碳纳米管接枝了生物活性的部分,并具有一定溶解性,在药物载体领域将具有潜在用途。     

Facile synthesis of ABCDE‐type H‐shaped quintopolymers by combination of ATRP,ROP, and click chemistry and their potential applications as drug carriers

A facile approach to synthesis of ABCDE‐type H‐shaped quintopolymer comprising polystyrene (PSt, C) main chain and poly(ethylene glycol) (PEG, A), poly(ε‐caprolactone) (PCL, B), poly(L ‐lactide) (PLLA, D), and poly(acrylic acid) (PAA, E) side chains was described, and physicochemical properties and potential applications as drug carriers of copolymers obtained were investigated. Azide‐alkyne cycloaddition reaction and hydrolysis were used to synthesize well‐defined H‐shaped quintopolymer. Cytotoxicity studies revealed H‐shaped copolymer aggregates were nontoxic and biocompatible, and drug loading and release properties were affected by macromolecular architecture, chemical composition, and pH value. The release rate of doxorubicin from copolymer aggregates at pH 7.4 was decreased in the order PAA‐b‐PLLA > H‐shaped copolymer > PEG‐PCL‐PSt star, and the release kinetics at lower pH was faster. The H‐shaped copolymer aggregates have a potential as controlled delivery vehicles due to their excellent storage stability, satisfactory drug loading capacity, and pH‐sensitive release rate of doxorubicin. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Semi‐Interpenetrated Hydrogels‐Microfibers Electroactive Assemblies for Release and Real‐Time Monitoring of Drugs

Simultaneous drug release and monitoring using a single polymeric platform represents a significant advance in the utilization of biomaterials for therapeutic use. Tracking drug release by real‐time electrochemical detection using the same platform is a simple way to guide the dosage of the drug, improve the desired therapeutic effect, and reduce the adverse side effects. The platform developed in this work takes advantage of the flexibility and loading capacity of hydrogels, the mechanical strength of microfibers, and the capacity of conducting polymers to detect the redox properties of drugs. The engineered platform is prepared by assembling two spin‐coated layers of poly‐γ‐glutamic acid hydrogel, loaded with poly(3,4‐ethylenedioxythiophene) (PEDOT) microparticles, and separated by a electrospun layer of poly‐ε‐caprolactone microfibers. Loaded PEDOT microparticles are used as reaction nuclei for the polymerization of poly(hydroxymethyl‐3,4‐ethylenedioxythiophene) (PHMeDOT), that semi‐interpenetrate the whole three layered system while forming a dense network of electrical conduction paths. After demonstrating its properties, the platform is loaded with levofloxacin and its release monitored externally by UV–vis spectroscopy and in situ by using the PHMeDOT network. In situ real‐time electrochemical monitoring of the drug release from the engineered platform holds great promise for the development of multi‐functional devices for advanced biomedical applications.     

Synthesis and properties of monocleavable amphiphilic comblike copolymers with alternating PEG and PCL grafts

Symmetric reduction‐responsive amphiphilic comblike copolymers mid‐disulfide‐functionalized comblike copolymers with alternating copolymer comprised of styrenic unit and N‐(2‐hydroxyethyl) maleimide (HEMI) unit (poly(St‐alt‐HEMI)) backbones and alternating PEG and PCL side chains (S‐CP(PEG‐alt‐PCL)) with poly(St‐alt‐HEMI) backbones and alternating poly(ε‐caprolactone) (PCL) and poly(ethylene glycol) (PEG) side chains were synthesized and used as nanocarriers for in vitro release of doxorubicin. The target copolymers with predetermined molecular weight and narrow molecular weight distribution (M_w/M_n = 1.15–1.20) were synthesized by reversible addition‐fragmentation chain transfer (RAFT) copolymerization of vinylbenzyl‐terminated PEG and N‐(2‐hydroxyethyl) maleimide mediated by a disulfide‐functionalized RAFT agent S‐CPDB, and followed by ring‐opening polymerization of ε‐caprolactone. When compared with linear block copolymer comprised of poly(ethylene glycol) (PEG) and poly(?‐caprolactone) (PCL) segments (PEG‐b‐PCL) copolymers, comblike copolymers with similar PCL contents usually exhibited decreased crystallization temperature, melting temperature, and degree of crystallinity, indicating the significant influence of copolymer architecture on physicochemical properties. Dynamic light scattering measurements revealed that comblike copolymers were liable to self‐assemble into aggregates involving vesicles and micelles with average diameter in the range of 56–226 nm and particle size distribution ranging between 0.07 and 0.20. In contrast to linear copolymer aggregates, comblike copolymer aggregates with similar compositions were of improved storage stability and enhanced drug‐loading efficiency. In vitro drug release confirmed the disulfide‐linked comblike copolymer aggregates could rapidly release the encapsulated drug when triggered by 10 mM DL ‐dithiothreitol. These reduction‐sensitive, biocompatible, and biodegradable aggregates have a potential as controlled delivery vehicles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,self‐assembly and recognition properties of biomimetic star‐shaped poly(ε‐caprolactone)‐b‐glycopolymer block copolymers

Biomimetic star‐shaped poly(ε‐caprolactone)‐b‐poly(gluconamidoethyl methacrylate) block copolymers (SPCL‐PGAMA) were synthesized from the atom transfer radical polymerization (ATRP) of unprotected GAMA glycomonomer using a tetra(2‐bromo‐2‐methylpropionyl)‐terminated star‐shaped poly(ε‐caprolactone) (SPCL‐Br) as a macroinitiator in NMP solution at room temperature. The block length of PGAMA glycopolymer within as‐synthesized SPCL‐PGAMA copolymers could be adjusted linearly by controlling the molar ratio of GAMA glycomonomer to SPCL‐Br macroinitiator, and the molecular weight distribution was reasonably narrow. The degree of crystallization of PCL block within copolymers decreased with the increasing block length ratio of outer PGAMA to inner PCL. Moreover, the self‐assembly properties of the SPCL‐PGAMA copolymers were investigated by NMR, UV‐vis, DLS, and TEM, respectively. The self‐assembled glucose‐installed aggregates changed from spherical micelles to worm‐like aggregates, then to vesicles with the decreasing weight fraction of hydrophilic PGAMA block. Furthermore, the biomolecular binding of SPCL‐PGAMA with Concanavalin A (Con A) was studied by means of UV‐vis, fluorescence spectroscopy, and DLS, which demonstrated that these SPCL‐PGAMA copolymers had specific recognition with Con A. Consequently, this will not only provide biomimetic star‐shaped SPCL‐PGAMA block copolymers for targeted drug delivery, but also improve the compatibility and drug release properties of PCL‐based biomaterials for hydrophilic peptide drugs. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 817–829, 2008     

Fabrication and characterization of gold nanospheres‐cored pH‐sensitive thiol‐ended triblock copolymer: A smart drug delivery system for cancer therapy

Conventional chemotherapy suffers lack of multidrug resistance (MDR), lack of bioavailability, and selectivity. Nano‐sized drug delivery systems (DDS) are developing aimed to solve several limitations of conventional DDS. These systems have been offered for targeting tumor tissue owing to enhanced long circulation time, drug solubility, their retention effect, and improved permeability. As a result, the aim of this project was the design and development of DDS for biomedical applications. For this purpose, gold nanospheres (GNSs) covered by pH‐sensitive thiol‐ended triblock copolymer [poly(methacrylic acid) ‐b‐poly(acrylamide) ‐b‐poly(ε‐caprolactone)‐SH; PMAA‐b‐PAM‐b‐PCL‐SH] for delivery of anticancer drug doxorubicin (DOX). The chemical structures of triblock copolymer were investigated by proton nuclear magnetic resonance (¹H NMR) and Fourier transform infrared (FTIR) spectroscopies. ¹H NMR spectroscopy and gel permeation chromatography (GPC) were used for calculating the molecular weights of each part in the nanocarrier. The success of coating, GNSs with triblock copolymer was considered by means of dynamic light scattering (DLS), FTIR, ultraviolet‐visible (UV‐Vis), and transmission electron microscopy (TEM) measurement. The pH‐responsive drug release ability, (DOX)‐loading capacity, biocompatibility, and in vitro cytotoxicity effects of the nanocarriers were also studied. As a result, it is expected that the synthesized GNSs@polymer‐DOX considered as a potential application in nanomedicine demand like smart drug delivery, imaging, and chemo‐photothermal therapy.     

Synthesis and characterization of biodegradable A–B–A triblock copolymers containing poly(ϵ‐caprolactone) A blocks and poly(trans‐4‐hydroxy‐L‐proline) B blocks

Novel, biodegradable poly(?‐caprolactone)‐block‐poly(trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline)‐block‐poly(?‐caprolactone) triblock copolymers were synthesized by ring‐opening polymerization from dihydroxyl‐terminated macroinitiator poly(trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline) (PHpr) and ?‐caprolactone (?‐CL) with stannous octoate as the catalyst. The molecular weights were characterized with gel permeation chromatography and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. With an increase in the contents of ?‐CL incorporated into the copolymers, a decrease in the glass‐transition temperature (T_g) was observed. The T_g values of copoly(4‐phenyl‐?‐caprolactone) and copoly(4‐methyl‐?‐caprolactone) were higher than T_g of copoly(?‐caprolactone). Their micellar characteristics in an aqueous phase were investigated with fluorescence spectroscopy, dynamic light scattering, and transmission electron microscopy. The block copolymers formed micelles in the aqueous phase with critical micelle concentrations in the range of 1.00–1.36 mg L^?1. With higher molecular weights and hydrophobic components in the copolymers, a higher critical micelle concentration was observed. As the feed weight ratio of antitriptyline hydrochloride (AM) to the polymer increased, the drug loading increased. The micelles exhibited a spherical shape, and the average size was less than 250 nm. The in vitro hydrolytic degradation and controlled drug release properties of the triblock copolymers were also investigated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4268–4280, 2006     

γ‐Butyrolactone Copolymerization with the Well‐Documented Polymer Drug Carrier Poly(ethylene oxide)‐block‐poly(ε‐caprolactone) to Fine‐Tune Its Biorelevant Properties

Polymeric drug carriers exhibit excellent properties that advance drug delivery systems. In particular, carriers based on poly(ethylene oxide)‐block‐poly(ε‐caprolactone) are very useful in pharmacokinetics. In addition to their proven biocompatibility, there are several requirements for the efficacy of the polymeric drug carriers after internalization, e.g., nanoparticle behavior, cellular uptake, the rate of degradation, and cellular localization. The introduction of γ‐butyrolactone units into the hydrophobic block enables the tuning of the abovementioned properties over a wide range. In this study, a relatively high content of γ‐butyrolactone units with a reasonable yield of ≈60% is achieved by anionic ring‐opening copolymerization using 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene as a very efficient catalyst in the nonpolar environment of toluene with an incorporated γ‐butyrolactone content of ≈30%. The content of γ‐butyrolactone units can be easily modulated according to the feed ratio of the monomers. This method enables control over the rate of degradation so that when the content of γ‐butyrolactone increases, the rate of degradation increases. These findings broaden the application possibilities of polyester‐polyether‐based nanoparticles for biomedical applications, such as drug delivery systems.     

Synthesis and characterization of a biodegradable ABC triblock terpolymer as co‐delivery carrier of doxorubicin and DNA

This study is aimed to develop a well‐defined ABC triblock terpolymer, poly(ethylethylene phosphate)‐block‐poly(ε‐caprolactone)‐block‐poly[2‐(dimethylamino)ethyl methacrylate] (PEEP‐b‐PCL‐b‐PDMAEMA), for co‐encapsulating anticancer drug doxorubicin (DOX) and DNA to form polyplexes. The terpolymer is first synthesized via a combination of ring‐opening polymerization and atom‐transfer radical polymerization techniques, and characterized by ¹H NMR and gel permeation chromatography. Subsequently, the self‐assembly behavior of the terpolymer and the micelles loaded with DOX or DNA are investigated by dynamic light scattering, ζ potential, transmission electron microscopy, and gel retardation assay, respectively. In vitro release study reveals that much more DOX is released at pH 5.0 than that at pH 7.4 in the same period. The simultaneous delivery of DOX and green fluorescent protein (GFP)‐labeled DNA is studied by a fluorescence microscope and the results demonstrate that both drug and GFP–DNA can be efficiently delivered into HeLa cells. This system presents a practical and promising carrier for the co‐delivery of drugs and genes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3005–3016     

Controlled release of antibiotics from poly‐ε‐caprolactone/polyethylene glycol wound dressing fabricated by direct‐writing melt electrospinning

Wound dressing, which can release anti‐infectives in a controlled way, is taking an important role in the treatment and recovery of the open wound. An adequate release of antibiotics can prevent infections from microorganisms effectively. Among the new candidates of fabricating base materials for wound dressing, electrospinning fiber mats are attracting numerous attentions for their excellent performance in controlled drug delivery. The drug release behavior of electrospinning fiber mats can be tuned by changing the chemical components and the geometric structures of the mats. In this study, fiber mats with different geometric structures, which composed of poly‐ε‐caprolactone (PCL), polyethylene glycol (PEG), and ciprofloxacin (Cip) with different blending ratios, were successfully fabricated by direct‐writing melt electrospinning, and the release behavior of Cip were subsequently investigated in vitro. The results showed that the addition of PEG improved the hydrophilicity of the mats, which in turn affected the manner of drug release. The presence of PEG changed the releasing mechanism from a non‐Fickian diffusion into Fickian diffusion, which indicated that the diffusion of Cip from the composite fiber mats became the main factor of drug release instead of polymer degradation. Besides, with the same composition but different geometric structures, the drug release behavior is of significant difference. Therefore, all the Cip‐loaded composite fiber mats showed antibacterial activities but with different efficiency. In summary, the release of the drug could be controlled by adding PEG and changing the geometric structures according to the different requirement of wound dressings.     

Synthesis,Morphological Structures,and Material Characterization of Electrospun PLA:PCL/Magnetic Nanoparticle Composites for Drug Delivery

The effects of pure and impure magnetic nanoparticles (MPs) with three different concentrations (0.01, 0.1, and 1 wt %/v) on the morphological structure, crystallinity level, thermal properties and constituent interactions of electrospun poly(lactic acid) (PLA): poly(ε‐caprolactone) (PCL)‐based composites were investigated by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), differential scanning calorimetry (DSC), gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), and drug release tests using UV–vis spectrophotometry. Tetracycline hydrochloride (TCH), as a typical therapeutic compound, was loaded into these composite fibrous structures to study their application for drug delivery. The infrared spectra of composite nanofibers confirm the successful embedding of MPs into the fibrous networks. The addition of pure MPs increased the solution viscosity and thus promoted the MP dispersion inside the electrospun composite fiber mats. Impure MPs led to considerably lower average fiber diameters, and could generate unique cell structures that were reported for the first time in this study. The accelerated release of TCH was found by adding pure MPs to PLA:PCL blends. This characteristic was reflected in the parameters of Ritger‐Peppas and Zeng models, which were well fitted to our experimental drug release data. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1607–1617     

Synthesis and characterization of functionalized poly(ɛ‐caprolactone)

Polyesters constitute an important class of materials for in vivo biomedical applications. Poly(?‐caprolactone) (PCL) is a hydrophobic biodegradable polyester which is employed to a lesser extent in drug delivery applications due to its rather limited range of physicochemical characteristics. Here, we present a new paradigm for the synthesis of functionalized PCL via copolymerization of caprolactone with α,ω‐epoxy esters. Ethyl 2‐methyl‐4‐pentenoate oxide was used as a monomer which was copolymerized with ?‐caprolactone to yield random copolymers of poly(?‐caprolactone‐co‐ethyl‐2‐methyl‐4‐pentenoate oxide). The reaction conditions were optimized to generate functionalization greater than 25%. The use of ester‐epoxides favors a statistical and uniform distribution of monomer along the polymer backbone, which while preserving some of the key properties of PCL such as glass transition that is below room temperature, allows the tailoring of the melting behavior of PCL. The strategy presented herein opens up new avenues for engineering PCL properties for biomedical applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3375–3382