Large Optical Nonlinearity Induced by Singlet Fission in Pentacene Films

By creating two triplet excitons from one photo‐excited singlet exciton, singlet fission in organic semiconductors has drawn tremendous attention for its potential applications in boosting the efficiency of solar conversion. Here, we show that this carrier‐multiplication effect can also be used to dramatically improve the nonlinear optical response in organic materials. We have observed large optical nonlinearity with a magnitude of χ⁽³⁾ up to 10^?9 esu in pentacene films, which is further shown to be a result of singlet fission by monitoring the temporal dynamics. The potential application of such efficient nonlinear optical response has been demonstrated with a singlet‐fission‐induced polarization rotation.     

Sub‐Picosecond Singlet Exciton Fission in Cyano‐Substituted Diaryltetracenes

Thin films of 5,11‐dicyano‐6,12‐diphenyltetracene ( TcCN ) have been studied for their ability to undergo singlet exciton fission (SF). Functionalization of tetracene with cyano substituents yields a more stable chromophore with favorable energetics for exoergic SF (2E(T₁)?E(S₁)=?0.17 eV), where S₁ and T₁ are singlet and triplet excitons, respectively. As a result of tuning the triplet‐state energy, SF is faster in TcCN relative to the corresponding endoergic process in tetracene. SF proceeds with two time constants in the film samples (τ=0.8±0.2 ps and τ=23±3 ps), which is attributed to structural disorder within the film giving rise to one population with a favorable interchromophore geometry, which undergoes rapid SF, and a second population in which the initially formed singlet exciton must diffuse to a site at which this favorable geometry exists. A triplet yield analysis using transient absorption spectra indicates the formation of 1.6±0.3 triplets per initial excited state.     

Quantum Master Equation Approach to Singlet Fission Dynamics in Pentacene Linear Aggregate Models: Size Dependences of Excitonic Coupling Effects

The singlet fission (SF) dynamics of pentacene linear aggregate models are investigated using the quantum master equation method by focusing on the Frenkel excitonic (FE) coupling effects on the SF rate and double triplet (TT) yield as well as on their aggregate size dependences. It is found that for the dimer model, unrealistically large FE couplings are needed to provide significant effects on the SF dynamics, while for the larger aggregate models a realistic FE coupling causes significant variations in the SF dynamics: as increasing the aggregate size, the SF rate rapidly increases, attains the maximum at 8-mer (~3 times enhancement as compared to the non-FE-coupling case) and then decreases, approaching a stationary value after 12-mer, although the stationary TT yield at 20-mer remains slightly smaller than that in the non-FE-coupling case. These features are explained based on the relative relaxation factors between the adiabatic exciton states. The present results contribute to constructing the design guidelines for highly efficient SF aggregates. © 2018 Wiley Periodicals, Inc.     

On the Hopping Efficiency of Nanoparticles in the Electron Transfer across Self‐Assembled Monolayers

Redox reactions of solvated molecular species at gold‐electrode surfaces modified by electrochemically inactive self‐assembled molecular monolayers (SAMs) are found to be activated by introducing Au nanoparticles (NPs) covalently bound to the SAM to form a reactive Au–alkanedithiol–NP–molecule hybrid entity. The NP appears to relay long‐range electron transfer (ET) so that the rate of the redox reaction may be as efficient as directly on a bare Au electrode, even though the ET distance is increased by several nanometers. In this study, we have employed a fast redox reaction of surface‐confined 6‐(ferrocenyl) hexanethiol molecules and NPs of Au, Pt and Pd to address the dependence of the rate of ET through the hybrid on the particular NP metal. Cyclic voltammograms show an increasing difference in the peak‐to‐peak separation for NPs in the order Au<Pt<Pd, especially when the length of the alkanedithiol increases from octanedithiol to decanedithiol. The corresponding apparent rate constants, k_app, for decanedithiol are 1170, 360 and 14 s^?1 for NPs of Au, Pt and Pd, respectively, indicating that the efficiency of NP mediation of the ET clearly depends on the nature of the NP. Based on a preliminary analysis rooted in interfacial electrochemical ET theory, combined with a simplified two‐step view of the NP coupling to the electrode and the molecule, this observation is referred to the density of electronic states of the NPs, reflected in a broadening of the molecular electron/NP bridge group levels and energy‐gap differences between the Fermi levels of the different metals.     

Singlet Fission in Carbene‐Derived Diradicaloids

Herein, we present a new class of singlet fission (SF) materials based on diradicaloids of carbene scaffolds, namely cyclic (alkyl)(amino)carbenes (CAACs). Our modular approach allows the tuning of two key SF criteria: the steric factor and the diradical character. In turn, we modified the energy landscapes of excited states in a systematic manner to accommodate the needs for SF. We report the first example of intermolecular SF in solution by dimer self‐assembly at cryogenic temperatures.     

Molecular Suction Pads: Self‐Assembled Monolayers of Subphthalocyaninatoboron Complexes on Gold

Subphthalocyaninatoboron complexes with six long‐chain alkylthio substituents in their periphery are applicable for the formation of self‐assembled monolayers (SAMs) on gold. Such films are prepared from solution with the axially chlorido‐substituted derivatives and characterised by near‐edge X‐ray absorption fine structure (NEXAFS) spectroscopy, X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). The results are in accord with the formation of SAMs assembled by the chemisorption of both covalently bound thiolate‐type as well as coordinatively bound thioether units. The adsorbate molecules adopt an essentially flat adsorption geometry on the substrate, resembling a suction pad on a surface.     

Singlet Fission in Pyrene‐Fused Azaacene Dimers

Singlet fission has emerged as a promising strategy to avoid the loss of extra energy through thermalization in solar cells. A family of dimers consisting of nitrogen‐doped pyrene‐fused acenes that undergo singlet fission with triplet quantum yields as high as 125 % are presented. They provide new perspectives for nitrogenated polycyclic aromatic hydrocarbons and for the design of new materials for singlet fission.     

In Situ Synthesis of Self‐Assembled Gold Nanoparticles on Glass or Silicon Substrates through Reactive Inkjet Printing

A facile and low cost method for the synthesis of self‐assembled nanoparticles (NPs) with minimal size variation and chemical waste by using reactive inkjet printing was developed. Gold NPs with diameters as small as (8±2) nm can be made at low temperature (120 °C). The size of the resulting NPs can be readily controlled through the concentration of the gold precursor and oleylamine ink. The pure gold composition of the synthesized NPs was confirmed by energy‐dispersive X‐ray spectroscopy (EDXS) analysis. High‐resolution SEM (HRSEM) and TEM (HRTEM), and X‐ray diffraction revealed their size and face‐centered cubic (fcc) crystal structure, respectively. Owing to the high density of the NP film, UV/Vis spectroscopy showed a red shift in the intrinsic plasmonic resonance peak. We envision the extension of this approach to the synthesis of other nanomaterials and the production of tailored functional nanomaterials and devices.     

A Rationally Designed Thymidine‐Based Self‐Assembled Monolayer on a Gold Electrode for Electroanalytical Applications

A self‐assembled monolayer (SAM) of 1‐(3,5‐epidithio‐2,3,5‐trideoxy‐β‐d ‐threo‐pentofuranosyl)thymine (EFT) on a gold electrode was prepared and characterized by Raman spectral and electrochemical measurements. Voltammetric and electrochemical impedance measurements show that the SAM of EFT on a Au electrode impedes the electron‐transfer reaction. The SAM of EFT was successfully used for the voltammetric sensing of urate in neutral solution. The coexisting ascorbate anion does not interfere and therefore the EFT‐based electrode was able to quantify urate at the micromolar level in the presence of a large excess amount of ascorbate. To demonstrate the practical applications, the amount of urate in two different human serum samples was quantified by using the EFT‐based electrode; the results are in good agreement with those determined by the clinical method. DFT calculations show that both ascorbate and urate have noncovalent interactions including hydrogen‐bonding interactions with EFT.     

Gradients of Rectification: Tuning Molecular Electronic Devices by the Controlled Use of Different‐Sized Diluents in Heterogeneous Self‐Assembled Monolayers

Molecular electronics has received significant attention in the last decades. To hone performance of devices, eliminating structural defects in molecular components inside devices is usually needed. We herein demonstrate this problem can be turned into a strength for modulating the performance of devices. We show the systematic dilution of a monolayer of an organic rectifier (2,2′‐bipyridine‐terminated n‐undecanethiolate) with electronically inactive diluents (n‐alkanethiolates of different lengths), gives remarkable gradients of rectification. Rectification is finely tunable in a range of approximately two orders of magnitude, retaining its polarity. Trends of rectification against the length of the diluent indicate the gradient of rectification is extremely sensitive to the molecular structure of the diluent. Further studies reveal that noncovalent intermolecular interactions within monolayers likely leads to gradients of structural defect and rectification.     

Intermolecular Interactions in Mixed Self‐Assembled Monolayers of Ferrocene

Electrochemical characterization of mixed self‐assembled monolayers (SAMs) of 6‐ferrocenyl‐1‐hexanethiol (FcH) and mercaptoundecanoic acid tyrosinamide (MUATyr) on gold is reported. Single‐component SAMs of FcH presented repulsive intermolecular interactions (vGθ_T=?1.12), while mixed SAMs of FcH/MUATyr (1 : 1) exhibited attractive interactions (vGθ_T=+0.20), with a homogeneous distribution of both components. Electrochemical kinetic determinations on mixed SAMs of FcH/MUATyr, indicated a secondary electron transfer pathway between the redox centers of both components. Higher amounts of FcH in the mixed SAMs lowered the observed rate of electron transfer of MUATyr. The oxidation of FcH caused an anodic shift of 160 mV in the voltammetric wave of MUATyr.     

Robust Self‐Assembled Monolayers of RuII and OsII Polypyridines on Gold Surfaces: Exploring New Potentials

Functional monolayers : Ru^II and Os^II bis‐terpyridine complexes have been attached through a piperazine‐supported dithiocarbamate to a gold substrate (see picture). The robust tether, and the favourable reduction in oxidation potential induced by the electron‐rich piperazine result in self‐assembled monolayers with excellent reversible redox behaviour and exceptional stability.

     

基于微机电系统技术和纳米金自组装膜的安培型免疫传感器研究

基于微机电系统(MEMS)技术制备安培型免疫传感器,并利用基于硫醇单层膜的纳米金单层膜自组装技术设计传感器界面,用于固定人免疫球蛋白(IgG)抗体,研制了一种新型的安培型免疫传感器。采用MEMS技术,在硅片上制备微型的三电极系统以及SU-8反应池。基于自组装技术,先在金电极上自组装巯基乙胺单层膜,利用膜上氨基与纳米金共价结合组装纳米金单层膜,得到可用于固定抗体的界面。实验探讨了影响抗体固定的主要实验参数和条件;考察了采用此固定化方法传感器的响应性能,与金电极直接吸附固定法和戊二醛共价交联固定法进行了比较。对IgG检测的实验结果表明,采用纳米金自组装膜固定抗体,具有活性高、非特异性吸附小、检测线性范围宽等优点。并且,基于MEMS技术的安培型免疫传感器具有微型化、与集成电路工艺相兼容、易于实现传感器的阵列化和实时多参数检测等优点。