The synthesis of single‐atom catalysts and the control of the electronic properties of catalytic sites to arrive at superior catalysts is a major challenge in heterogeneous catalysis. A stable supported single‐atom silver catalyst with a controllable electronic state was obtained by anti‐Ostwald ripening. An electronic perturbation of the catalytic sites that is induced by a subtle change in the structure of the support has a strong influence on the intrinsic reactivity. The higher depletion of the 4d electronic state of the silver atoms causes stronger electronic metal–support interactions, which leads to easier reducibility and higher catalytic activity. These results may improve our understanding of the nature of electronic metal–support interactions and lead to structure–activity correlations. 相似文献
Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs4[α‐SiW12O40]?n H2O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was ?67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Auδ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions. 相似文献
This Concept is aimed at describing the current state of the art in metal–organic frameworks (MOFs) as heterogeneous catalysts for liquid‐phase oxidations, focusing on three important substrates, namely, alkenes, alkanes and alcohols. Emphases are on the nature of active sites that have been incorporated within MOFs and on future targets to be set in this area. Thus, selective alkene epoxidation with peroxides or oxygen catalyzed by constitutional metal nodes of MOFs as active sites are still to be developed. Moreover, no noble metal‐free MOF has been reported to date that can act as a general catalyst for the aerobic oxidation of primary and secondary aliphatic alcohols. In contrast, in the case of alkanes, a target should be to tune the polarity of MOF internal pores to control the outcome of the autooxidation process, resulting in the selective formation of alcohol/ketone mixtures at high conversion. 相似文献
A symbiosis of advanced scanning probe and electron microscopy and a well‐defined model system may provide a detailed picture of interfaces on nanostructured catalytic systems. This was demonstrated for Pt nanoparticles supported on iron oxide thin films which undergo encapsulation by supporting oxide as a result of strong metal–support interactions. 相似文献
Strong metal–support interaction (SMSI) has gained great attention in the field of heterogeneous catalysis. However, whether single‐atom catalysts can exhibit SMSI remains unknown. Here, we demonstrate that SMSI can occur on TiO2‐supported Pt single atoms but at a much higher reduction temperature than that for Pt nanoparticles (NPs). Pt single atoms involved in SMSI are not covered by the TiO2 support nor do they sink into its subsurface. The suppression of CO adsorption on Pt single atoms stems from coordination saturation (18‐electron rule) rather than the physical coverage of Pt atoms by the support. Based on the new finding it is revealed that single atoms are the true active sites in the hydrogenation of 3‐nitrostyrene, while Pt NPs barely contribute to the activity since the NP sites are selectively encapsulated. The findings in this work provide a new approach to study the active sites by tuning SMSI. 相似文献
PCM‐101 is a phosphine coordination material comprised of tris(p‐carboxylato)triphenylphosphine and secondary pillaring groups coordinated to [M3(OH)]5+ nodes (M=Co, Ni). PCM‐101 has a unique topology in which R3P: sites are arranged directly trans to one another, with a P???P separation distance dictated by the pillars. Post‐synthetic coordination of soft metals to the P: sites proceeds at room temperature to provide X‐ray quality crystals that permit full structural resolution. Addition of AuCl groups forces a large distortion of the parent framework. In contrast, CuBr undergoes insertion directly between the trans‐P sites to form dimers that mimic solution‐phase complexes, but that are geometrically strained due to steric pressure exerted by the MOF scaffold. The metalated materials are active in heterogeneous hydroaddition catalysis under mild conditions, yielding different major products compared to their molecular counterparts. 相似文献
Single atoms and few‐atom clusters of platinum are uniformly installed on the zirconia nodes of a metal‐organic framework (MOF) NU‐1000 via targeted vapor‐phase synthesis. The catalytic Pt clusters, site‐isolated by organic linkers, are shown to exhibit high catalytic activity for ethylene hydrogenation while exhibiting resistance to sintering up to 200 °C. In situ IR spectroscopy reveals the presence of both single atoms and few‐atom clusters that depend upon synthesis conditions. Operando X‐ray absorption spectroscopy and X‐ray pair distribution analyses reveal unique changes in chemical bonding environment and cluster size stability while on stream. Density functional theory calculations elucidate a favorable reaction pathway for ethylene hydrogenation with the novel catalyst. These results provide evidence that atomic layer deposition (ALD) in MOFs is a versatile approach to the rational synthesis of size‐selected clusters, including noble metals, on a high surface area support. 相似文献
Living on the edge : Three‐dimensional reconstructions from electron tomography data recorded from Au/Ce0.50Tb0.12Zr0.38O2?x catalysts show that gold nanoparticles (see picture; yellow) are preferentially located on stepped facets and nanocrystal boundaries. An epitaxial relationship between the metal and support plays a key role in the structural stabilization of the gold nanoparticles.
MnO2 was synthesised as a catalyst support material using a hydrothermal method. This involved reacting MnSO4 ? H2O and (NH4)2S2O8 at 120 °C for a range of crystallisation times, which affords control over the morphology and phase composition of the MnO2 formed. Gold was deposited on these supports using sol‐immobilisation, impregnation and deposition precipitation methods, and the resultant materials were used for the oxidation of benzyl alcohol and carbon monoxide. The effect of the support morphology on the dispersion of the gold nanoparticles and the consequent effect on the catalytic performance is described and discussed. 相似文献
Identifying effective means to improve the electrochemical performance of oxygen‐evolution catalysts represents a significant challenge in several emerging renewable energy technologies. Herein, we consider metal–nitrogen–carbon sheets which are commonly used for catalyzing the oxygen‐reduction reaction (ORR), as the support to load NiO nanoparticles for the oxygen‐evolution reaction (OER). FeNC sheets, as the advanced supports, synergistically promote the NiO nanocatalysts to exhibit superior performance in alkaline media, which is confirmed by experimental observations and density functional theory (DFT) calculations. Our findings show the advantages in considering the support effect for designing highly active, durable, and cost‐effective OER electrocatalysts. 相似文献
Intriguing properties and functions are expected to implant into metal–organic layers (MOLs) to achieve tailored pore environments and multiple functionalities owing to the synergies among multiple components. Herein, we demonstrate a facile one‐pot synthetic strategy to incorporate multiple functionalities into stable zirconium MOLs via secondary ligand pillaring. Through the combination of Zr6‐BTB (BTB=benzene‐1,3,5‐tribenzoate) layers and diverse secondary ligands (including ditopic and tetratopic linkers), 31 MOFs with multi‐functionalities were systematically prepared. Notably, a metal–phthalocyanine fragment was successfully incorporated into this Zr‐MOL system, giving rise to an ideal platform for the selective oxidation of anthracene. The organic functionalization of two‐dimensional MOLs can generate tunable porous structures and environments, which may facilitate the excellent catalytic performance of as‐synthesized materials. 相似文献
The role of metal–organic frameworks (MOFs) in the field of catalysis is discussed, and special focus is placed on their assets and limits in light of current challenges in catalysis and green chemistry. Their structural and dynamic features are presented in terms of catalytic functions along with how MOFs can be designed to bridge the gap between zeolites and enzymes. The contributions of MOFs to the field of catalysis are comprehensively reviewed and a list of catalytic candidates is given. The subject is presented from a multidisciplinary point of view covering solid‐state chemistry, materials science, and catalysis. 相似文献
Hollow metal–organic frameworks (MOFs) are promising materials with sophisticated structures, such as multiple shells, that cannot only enhance the properties of MOFs but also endow them with new functions. Herein, we show a rational strategy to fabricate multi‐shelled hollow chromium (III) terephthalate MOFs (MIL‐101) with single‐crystalline shells through step‐by‐step crystal growth and subsequent etching processes. This strategy relies on the creation of inhomogeneous MOF crystals in which the outer layer is chemically more robust than the inner layer and can be selectively etched by acetic acid. The regulation of MOF nucleation and crystallization allows the tailoring of the cavity size and shell thickness of each layer. The resultant multi‐shelled hollow MIL‐101 crystals show significantly enhanced catalytic activity during styrene oxidation. The insight gained from this systematic study will aid in the rational design and synthesis of other multi‐shelled hollow structures and the further expansion of their applications. 相似文献
The current technology of air‐filtration materials for protection against highly toxic chemicals, that is, chemical‐warfare agents, is mainly based on the broad and effective adsorptive properties of hydrophobic activated carbons. However, adsorption does not prevent these materials from behaving as secondary emitters once they are contaminated. Thus, the development of efficient self‐cleaning filters is of high interest. Herein, we report how we can take advantage of the improved phosphotriesterase catalytic activity of lithium alkoxide doped zirconium(IV) metal–organic framework (MOF) materials to develop advanced self‐detoxifying adsorbents of chemical‐warfare agents containing hydrolysable P? F, P? O, and C? Cl bonds. Moreover, we also show that it is possible to integrate these materials onto textiles, thereby combining air‐permeation properties of the textiles with the self‐detoxifying properties of the MOF material. 相似文献
Homogeneous transition‐metal catalysis is a crucial technology for the sustainable preparation of valuable chemicals. The catalyst concentration is usually kept as low as possible, typically at mM or μM levels, and the effect of high catalyst concentration is hardly exploited because of solubility issues and the inherent unfavorable catalyst/substrate ratio. Herein, a self‐assembly strategy is reported which leads to local catalyst concentrations ranging from 0.05 M to 1.1 M , inside well‐defined nanospheres, whilst the overall catalyst concentration in solution remains at the conventional mM levels. We disclose that only at this high concentration, the gold(I) chloride is reactive and shows high selectivity in intramolecular C? O and C? C bond‐forming cyclization reactions. 相似文献