A Dewetted‐Dealloyed Nanoporous Pt Co‐Catalyst Formed on TiO2 Nanotube Arrays Leads to Strongly Enhanced Photocatalytic H2 Production

Pt nanoparticles are typically decorated as co‐catalyst on semiconductors to enhance the photocatalytic performance. Due to the low abundance and high cost of Pt, reaching a high activity with minimized co‐catalyst loadings is a key challenge in the field. We explore a dewetting‐dealloying strategy to fabricate on TiO₂ nanotubes nanoporous Pt nanoparticles, aiming at improving the co‐catalyst mass activity for H₂ generation. For this, we sputter first Pt‐Ni bi‐layers of controllable thickness (nm range) on highly ordered TiO₂ nanotube arrays, and then induce dewetting‐alloying of the Pt‐Ni bi‐layers by a suitable annealing step in a reducing atmosphere: the thermal treatment causes the Pt and Ni films to agglomerate and at the same time mix with each other, forming on the TiO₂ nanotube surface metal islands of a mixed PtNi composition. In a subsequent step we perform chemical dealloying of Ni that is selectively etched out from the bimetallic dewetted islands, leaving behind nanoporous Pt decorations. Under optimized conditions, the nanoporous Pt‐decorated TiO₂ structures show a>6 times higher photocatalytic H₂ generation activity compared to structures modified with a comparable loading of dewetted, non‐porous Pt. We ascribe this beneficial effect to the nanoporous nature of the dealloyed Pt co‐catalyst, which provides an increased surface‐to‐volume ratio and thus a more efficient electron transfer and a higher density of active sites at the co‐catalyst surface for H₂ evolution.     

Ultrathin Coating of Confined Pt Nanocatalysts by Atomic Layer Deposition for Enhanced Catalytic Performance in Hydrogenation Reactions

Metal‐support interfaces play a prominent role in heterogeneous catalysis. However, tailoring the metal‐support interfaces to realize full utilization remains a major challenge. In this work, we propose a graceful strategy to maximize the metal‐oxide interfaces by coating confined nanoparticles with an ultrathin oxide layer. This is achieved by sequential deposition of ultrathin Al₂O₃ coats, Pt, and a thick Al₂O₃ layer on carbon nanocoils templates by atomic layer deposition (ALD), followed by removal of the templates. Compared with the Pt catalysts confined in Al₂O₃ nanotubes without the ultrathin coats, the ultrathin coated samples have larger Pt–Al₂O₃ interfaces. The maximized interfaces significantly improve the activity and the protecting Al₂O₃ nanotubes retain the stability for hydrogenation reactions of 4‐nitrophenol. We believe that applying ALD ultrathin coats on confined catalysts is a promising way to achieve enhanced performance for other catalysts.     

Multiply Confined Nickel Nanocatalysts Produced by Atomic Layer Deposition for Hydrogenation Reactions

To design highly efficient catalysts, new concepts for optimizing the metal–support interactions are desirable. Here we introduce a facile and general template approach assisted by atomic layer deposition (ALD), to fabricate a multiply confined Ni‐based nanocatalyst. The Ni nanoparticles are not only confined in Al₂O₃ nanotubes, but also embedded in the cavities of Al₂O₃ interior wall. The cavities create more Ni–Al₂O₃ interfacial sites, which facilitate hydrogenation reactions. The nanotubes inhibit the leaching and detachment of Ni nanoparticles. Compared with the Ni‐based catalyst supported on the outer surface of Al₂O₃ nanotubes, the multiply confined catalyst shows a striking improvement of catalytic activity and stability in hydrogenation reactions. Our ALD‐assisted template method is general and can be extended for other multiply confined nanoreactors, which may have potential applications in many heterogeneous reactions.     

Milling Down to Nanometers: A General Process for the Direct Dry Synthesis of Supported Metal Catalysts

Supported catalysts are among the most important classes of catalysts. They are typically prepared by wet‐chemical methods, such as impregnation or co‐precipitation. Here we disclose that dry ball milling of macroscopic metal powder in the presence of a support oxide leads in many cases to supported catalysts with particles in the nanometer size range. Various supports, including TiO₂, Al₂O₃, Fe₂O₃, and Co₃O₄, and different metals, such as Au, Pt, Ag, Cu, and Ni, were studied, and for each of the supports and the metals, highly dispersed nanoparticles on supports could be prepared. The supported catalysts were tested in CO oxidation, where they showed activities in the same range as conventionally prepared catalysts. The method thus provides a simple and cost‐effective alternative to the conventionally used impregnation methods.     

Catalytic Performance and Characterization of Pt‐Co/Al2O3 Catalysts for CO2 Reforming of CH4 to Synthesis Gas

Pt‐Co/Al₂O₂ catalyst has been studied for CO₂ reforming of CH₄ to synthesis gas. It was found that the catalytic performance of me catalyst was sensitive to calcination temperature. When Co/Al₂O₃ was calcined at 1473 K prior to adding a small amount of Pt to it, the resulting bimetallic catalyst showed high activity, optimal stability and excellent resistance to carbon deposition, which was more effective to the reaction than Co/Al₂O₃ and Pt/Al₂O₃ catalysts. At lower metal loading, catalyst activity decreased in the following order: Pt‐Co/ Al₂O₃ > Pt/Al₂O₃ > Co/Al₂O₃. With 9% Co, the Co/Al₂O₃ calcined at 923 K was also active for CO₂ reforming of CH₄, however, its carbon formation was much more fast man that of the Pt‐Co/Al₂O₃ catalyst. The XRD results indicated that Pt species well dispersed over the bimetallic catalyst. Its high dispersion was related to the presence of CoAl₂O₄, formed during calcining of Co/Al₂O₃ at high temperature before Pt addition. Promoted by Pt, Co/Al₂O₄ in the catalyst could be reduced partially even at 923 K, the temperature of pre‐reduction for the reaction, confirmed by TPR. Based on these results, it was considered that the zerovalent platinum with high dispersion over the catalyst surface and the zerovalent cobalt resulting from Co/Al₂O₄ reduction are responsible for high activity of the Pt‐Co/Al₂O₃ catalyst, and the remain Co/Al₂O₄ is beneficial to suppression of carbon deposition over the catalyst.     

Oxide‐Nanotrap‐Anchored Platinum Nanoparticles with High Activity and Sintering Resistance by Area‐Selective Atomic Layer Deposition

An area‐selective atomic layer deposition (AS‐ALD) method is described to construct oxide nanotraps to anchor Pt nanoparticles (NPs) on Al₂O₃ supports. The as‐synthesized catalysts have exhibited outstanding room‐temperature CO oxidation activity, with a significantly lowered apparent activation energy (ca. 22.17 kJ mol⁻¹) that is half that of pure Pt catalyst with the same loading. Furthermore, the structure shows excellent sintering resistance with the high catalytic activity retention up to 600 °C calcination. The key feature of the oxide nanotraps lies in its ability to anchor Pt NPs via strong metal–oxide interactions while still leaving active metal facets exposed. Our reported method for forming such oxide structure with nanotraps shows great potential for the simultaneous enhancement of thermal stability and activity of precious metal NPs.     

Double‐Side Co‐Catalytic Activation of Anodic TiO2 Nanotube Membranes with Sputter‐Coated Pt for Photocatalytic H2 Generation from Water/Methanol Mixtures

Self‐standing TiO₂ nanotube layers in the form of membranes are fabricated by self‐organizing anodization of Ti metal and a potential shock technique. The membranes are then decorated by sputtering different Pt amounts i) only at the top, ii) only at the bottom or iii) at both top and bottom of the tube layers. The Pt‐decorated membranes are transferred either in tube top‐up or in tube top‐down configuration onto FTO slides and are investigated, after crystallization, as photocatalysts for H₂ generation using either front or back‐side light irradiation. Double‐side Pt‐decoration of the tube membranes leads to higher H₂ generation rates (independently of tube and light‐irradiation configuration) compared to membranes decorated at only one side with similar overall Pt amounts. The results suggest that this effect cannot be only ascribed to the overall amount of Pt co‐catalyst as such but also to its distribution at both tube extremities. This leads to optimized light absorption and electron diffusion/transfer dynamics: the central part of the membranes acts as light‐harvesting zone and electrons therein generated can diffuse towards the Pt/TiO₂ active zones (tube extremities) where they can react with the environment and generate H₂.     

Highly active catalysts: Double‐shelled hollow nanospheres with tiny Pt NPs

A facile strategy was reported to fabricate a novel Pt‐based metal oxide double‐shelled hollow nanospheres (MDSHs), which avoided the traditional tedious procedures. It was attractive that the formation mechanism of DSHs involved redeposition of etch‐released silica species and self‐assembly of metal oxide units. To verify the successful synthesis and structure features of Pt‐LCDSHs catalyst, the as‐prepared samples were characterized by several techniques, such as SEM, N₂ adsorption–desorption isotherm analysis, TEM, EDX, XRD and XPS. Results indicated that all of MDSHs possessed double‐shelled structures with both the inner and outer shells composing of metal oxide units. Interestingly, the metal oxide of the DHSs could offer abundant active points for Pt NPs and the space between the double shells also could be filled with Pt NPs. What's more, compared with the pure samples, the Pt‐embedded La₂O₃‐CeO₂‐DSHs exhibited the highest catalytic performance (6.58 × 10^?3 min^?1) and good reusability with a conversion of 94% even after eight cycles, which were evaluated by means of the reduction of 4‐nitrophenol monitored by UV–vis spectra. Finally, a possible reaction mechanism for the reduction reaction on Pt‐based La₂O₃‐CeO₂‐DSHs was also proposed.     

Metal–Organic Framework (MOF) Hybrid as a Tandem Catalyst for Enhanced Therapy against Hypoxic Tumor Cells

Encapsulation of active biomolecules and/or nanoparticles in metal–organic frameworks (MOFs) remains a great challenge in biomedical applications. In this work, through a stepwise in situ growth method, a black phosphorus quantum dot (BQ) and catalase were precisely encapsulated into the inner and outer layers of MOFs, respectively. The integrated MOF system as a tandem catalyst could convert H₂O₂ into O₂ in MOF‐stabilized catalase outer layer, and then O₂ was directly injected into MOF‐sensitized BQ inner, leading to high quantum yield of singlet oxygen. Upon internalization, the photodynamic therapy efficiency of the MOF system was 8.7‐fold greater than that without catalase, showing an enhanced therapeutic effect against hypoxic tumor cells. Furthermore, by coupling with photothermal therapy of BQs, photodynamic‐thermal synergistic therapy was realized both in vitro and in vivo.     

Tuning the High‐Temperature Wetting Behavior of Metals toward Ultrafine Nanoparticles

The interaction between metal nanoparticles (NPs) and their substrate plays a critical role in determining the particle morphology, distribution, and properties. The pronounced impact of a thin oxide coating on the dispersion of metal NPs on a carbon substrate is presented. Al₂O₃‐supported Pt NPs are compared to the direct synthesis of Pt NPs on bare carbon surfaces. Pt NPs with an average size of about 2 nm and a size distribution ranging between 0.5 nm and 4.0 nm are synthesized on the Al₂O₃ coated carbon nanofiber, a significant improvement compared to those directly synthesized on a bare carbon surface. First‐principles modeling verifies the stronger adsorption of Pt clusters on Al₂O₃ than on carbon, which attributes the formation of ultrafine Pt NPs. This strategy paves the way towards the rational design of NPs with enhanced dispersion and controlled particle size, which are promising in energy storage and electrocatalysis.     

Pt/oxide nanocatalysts synthesized via the ultrasonic spray pyrolysis process: engineering metal–oxide interfaces for enhanced catalytic activity

We show that Pt nanoparticles synthesized on oxide nanocatalysts exhibit catalytic activity enhancement depending on the type of the oxide support. To synthesize the Pt/oxide nanocatalysts, we employed a versatile synthesis method using Pt nanoparticles (NPs) supported on various metal oxides (i.e., SiO₂, CeO₂, Al₂O₃, and FeAl₂O₄) utilizing ultrasonic spray pyrolysis. Catalytic CO oxidation was carried out on these catalysts, and it was found that the catalytic activity of the Pt NPs varied depending on the supporting oxide. While Pt/CeO₂ exhibited the highest metal dispersion and active surface area, Pt/FeAl₂O₄ exhibited the lowest active surface area. Among the Pt/oxide nanocatalysts, Pt NPs supported on CeO₂ showed the highest catalytic activity. We ascribe the enhancement in turnover frequency of the Pt/CeO₂ nanocatalysts to strong metal–support interactions due to charge transport between the metal catalysts and the oxide support. Such Pt/oxide nanocatalysts synthesized via spray pyrolysis offer potential possibilities for large-scale synthesis of tailored catalytic systems for technologically relevant applications.     

Carbon Dioxide Reforming of Methane over Ni Catalysts Supported on Al2O3 Modified with La2O3, MgO, and CaO

The preparation of synthesis gas from carbon dioxide reforming of methane (CDR) has attracted increasing attention. The present review mainly focuses on CDR to produce synthesis gas over Ni/MO_x/Al₂O₃ (X = La, Mg, Ca) catalysts. From the examination of various supported nickel catalysts, the promotional effects of La₂O₃, MgO, and CaO have been found. The addition of promoters to Al₂O₃-supported nickel catalysts enhances the catalytic activity as well as stability. The catalytic performance is strongly dependent on the loading amount of promoters. For example, the highest CH₄ and CO₂ conversion were obtained when the ratios of metal M to Al were in the range of 0.04–0.06. In the case of Ni/La₂O₃/Al₂O₃ catalyst, the highest CH₄ conversion (96%) and CO₂ conversion (97%) was achieved with the catalyst (La/Al = 0.05 (atom/atom)). For Ni/CaO/Al₂O₃ catalyst, the catalyst with Ca/Al = 0.04 (atom/atom) exhibited the highest CH₄ conversion (91%) and CO₂ conversion (92%) among the catalysts with various CaO content. Also, Ni/MgO/Al₂O₃ catalyst with Mg/Al = 0.06 (atom/atom) showed the highest CH₄ conversion (89%) and CO₂ conversion (90%) among the catalysts with various Mg/Al ratios. Thus it is most likely that the optimal ratios of M to Al for the highest activities of the catalysts are related to the highly dispersed metal species. In addition, the improved catalytic performance of Al₂O₃-supported nickel catalysts promoted with metal oxides is due to the strong interaction between Ni and metal oxide, the stabilization of metal oxide on Al₂O₃ and the basic property of metal oxide to prevent carbon formation.     

Promotion Effects of Nickel Catalysts of Dry Reforming with Methane

The promotion effects of nickel catalyst of dry reforming with methane were extensively investigated by means of XRD, SEM, EDX, N₂‐adsorption and H₂‐adsorption. XRD characterization indicated that good dispersion of nickel oxide and MgO promoter is achieved over γ‐Al₂O₃ support. Addition of MgO promoter effectively retards the formation of NiAl₂O₄ phase. SEM and EDX analysis exhibited that the addition of rare‐earth metal oxide CeO₂ effectively promotes the Ni metal dispersion on the surface of the catalysts despite of undesirable self‐dispersion of CeO₂ promoter. Furthermore, the nickel component is gradually dispersed on the surface of the support following the exposure to reaction gas mixture for a period of time. The addition of MgO inhibited the self‐dispersion and promotion effect of CeO₂ on Ni dispersion on the catalysts. H₂ chemisorption revealed that the addition of the alkaline oxide MgO promoter significantly prohibits the metal dispersion on the catalyst. Inappropriate promoter addition can result in sharp decrease of the metal dispersion, N₂‐adsorption indicated that oxide promoter was mostly concentrated on the outer layer of the alumina support while the nickel metal was generally dispersed in the support pores. Addition of promoters contributed to more reduction in mesopore volume.     

Probing Catalytic Solid‐Liquid Interfaces by Attenuated Total Reflection Infrared Spectroscopy: Adsorption of Carboxylic Acids on Alumina and Titania

The adsorption of carboxylic acids (formic, acetic, and pyruvic acid) from corresponding solutions in CH₂Cl₂ solvent on Al₂O₃ and TiO₂ thin films has been studied by attenuated total reflection infrared spectroscopy. The metal‐oxide films were vapor‐deposited on a Ge internal reflection element, which was mounted into a specially designed flow cell. The system allowed in situ monitoring of the processes occurring at the solid‐liquid interface. The metal‐oxide films were characterized by X‐ray photoelectron spectroscopy, ellipsometry, and atomic force microscopy. Formic acid and acetic acid adsorbed predominantly as bridging species on alumina surfaces. Adsorbed free acids were not observed under a flow of neat solvent. Based on the position of the ν_AS(COO) and of the keto‐group stretching vibration of the pyruvate ion, pyruvic acid is proposed to coordinate to the Al₂O₃ surface in a monodentate fashion, whereas, on TiO₂, a bidentate species is preferred. Comparison of the adsorption behavior on the vapor‐deposited alumina film and on an α‐Al₂O₃ layer deposited from a water suspension of the corresponding metal‐oxide powder indicated that pyruvic acid adsorbs in a similar mode, irrespective of the metal‐oxide deposition technique.     

Antimicrobial Treatment of Different Metal Oxide Nanoparticles: A Critical Review

Many nanomaterials can be used as metal oxides (Ti, Ag, Zn, Cu, Mg, Ca, Ce, Yt, Al). Metal oxide nanoparticles have strong antimicrobial properties. The oxides that play a large role as antimicrobial agents can be divided into two major groups based on their mechanism of action i.e., those that involve oxidation and those that inhibit the production of Reactive Oxygen Species (ROS). Previous studies have shown that, toxic metals like silver and titanium, and their metals oxides, employ the ROS‐mediated mechanism that leads to oxidative stress‐related cytotoxicity, cancer, and heart diseases. Oxidative stress further leads to increased ROS production and also delays the cellular processes involved in wound heal‐ ing. Other metal oxide nanoparticles, like Y₂O₃, CeO₂ and Al₂O₃ act as free radical scavengers. Out of these, aluminium oxide nanoparticles are more effective antimicrobial agents, than the other metal oxide nanoparticles. A combination of Al₂O₃ and other antimicrobial agents such as TiO₂ may act as ideal antimicrobial agents, along with possessing free radical scavenging activity. This critical review aims to study the antimicrobial properties of different metal oxide nanoparticles and the mechanism of action in‐ volved, besides comparing their efficacy to eliminate bacteria.     

Selective Amplification of CO Bond Hydrogenation on Pt/TiO2: Catalytic Reaction and Sum‐Frequency Generation Vibrational Spectroscopy Studies of Crotonaldehyde Hydrogenation

The hydrogenation of crotonaldehyde in the presence of supported platinum nanoparticles was used to determine how the interaction between the metal particles and their support can control catalytic performance. Using gas‐phase catalytic reaction studies and in situ sum‐frequency generation vibrational spectroscopy (SFG) to study Pt/TiO₂ and Pt/SiO₂ catalysts, a unique reaction pathway was identified for Pt/TiO₂, which selectively produces alcohol products. The catalytic and spectroscopic data obtained for the Pt/SiO₂ catalyst shows that SiO₂ has no active role in this reaction. SFG spectra obtained for the Pt/TiO₂ catalyst indicate the presence of a crotyl‐oxy surface intermediate. By adsorption through the aldehyde oxygen atom to an O‐vacancy site on the TiO₂ surface, the C?O bond of crotonaldehyde is activated, by charge transfer, for hydrogenation. This intermediate reacts with spillover H provided by the Pt to produce crotyl alcohol.     

Facile Synthesis of Three‐Dimensional Pt‐TiO2 Nano‐networks: A Highly Active Catalyst for the Hydrolytic Dehydrogenation of Ammonia–Borane

Three‐dimensional (3D) porous metal and metal oxide nanostructures have received considerable interest because organization of inorganic materials into 3D nanomaterials holds extraordinary properties such as low density, high porosity, and high surface area. Supramolecular self‐assembled peptide nanostructures were exploited as an organic template for catalytic 3D Pt‐TiO₂ nano‐network fabrication. A 3D peptide nanofiber aerogel was conformally coated with TiO₂ by atomic layer deposition (ALD) with angstrom‐level thickness precision. The 3D peptide‐TiO₂ nano‐network was further decorated with highly monodisperse Pt nanoparticles by using ozone‐assisted ALD. The 3D TiO₂ nano‐network decorated with Pt nanoparticles shows superior catalytic activity in hydrolysis of ammonia–borane, generating three equivalents of H₂.     

电镀法制备Pt/TiO2纳米管电极及其电催化析氢性能

采用阳极氧化法制备得到锐钛矿型二氧化钛(TiO₂)纳米管阵列,在其表面通过电镀法沉积Pt,得到了低铂的Pt/TiO₂纳米管电极(Pt/TiO₂-NTs)。通过扫描电子显微镜和透射电子显微镜对其进行形貌表征后发现,Pt较为均匀地分布于TiO₂纳米管阵列中。进一步的电催化析氢结果表明,Pb/TiO₂-NTs在10 m A·cm^-2时,过电位为0.079 V,塔菲尔斜率为42.7 m V·dec^-1,较Pt/TiO₂致密膜电极(Pt/TiO₂-F)以及商业Pt/C催化剂显示了更为优异的催化活性。同时,在长循环稳定性测试(3 000个周期)中,Pb/TiO₂-NTs相较于上述2种对比电极显示了更为优异的稳定性。     

Pt-Sn/γ-Al2O3-catalyzed highly efficient direct synthesis of secondary and tertiary amines and imines

Versatile syntheses of secondary and tertiary amines by highly efficient direct N‐alkylation of primary and secondary amines with alcohols or by deaminative self‐coupling of primary amines have been successfully realized by means of a heterogeneous bimetallic Pt–Sn/γ‐Al₂O₃ catalyst (0.5 wt % Pt, Pt/Sn molar ratio=1:3) through a borrowing‐hydrogen strategy. In the presence of oxygen, imines were also efficiently prepared from the tandem reactions of amines with alcohols or between two primary amines. The proposed mechanism reveals that an alcohol or amine substrate is initially dehydrogenated to an aldehyde/ketone or NH‐imine with concomitant formation of a [PtSn] hydride. Condensation of the aldehyde/ketone species or deamination of the NH‐imine intermediate with another molecule of amine forms an N‐substituted imine which is then reduced to a new amine product by the in‐situ generated [PtSn] hydride under a nitrogen atmosphere or remains unchanged as the final product under an oxygen atmosphere. The Pt–Sn/γ‐Al₂O₃ catalyst can be easily recycled without Pt metal leaching and has exhibited very high catalytic activity toward a wide range of amine and alcohol substrates, which suggests potential for application in the direct production of secondary and tertiary amines and N‐substituted imines.     

Stoichiography in the study of spatial heterogeneity of the chemical composition and structure of thin films and nanostructured systems

We present the principles of stoichiography and a reference-free stoichiographic differential (separating) dissolution method used to study the composition and structure of thin films and nanostructured systems: HTS films with 123 different compositions, Al–Au–Sn–Co–Mn, Si/SiO₂/Ni(Cr)–Cu–Cu2S, Cr–Cu–S, and Cu–S multilayer films, Bi–Ti–O films on Ru/SiO₂/Si, Mn_1–xZn _x S, and ZnS–EuS supports, and also nanostructured manganese ferrite in borate glass matrices, nanodisperse composite sorbents and the Co–Si–Pt–O/Al₂O₃ catalyst modified by Pt nanoparticles, and oxide catalyst precursor Fe₂Co/Al₂O₃ for the synthesis of carbon nanotubes.