Ring-opening polymerization of L-lactide by means of different iron compounds

L-lactide was bulk-polymerized in the presence of various commercially available iron compounds. The polymerization temperature was in the range of 140 and 230 °C, the monomer to initiator/catalyst ratio varied between 100 and 10 000, and the polymerization time between 30 minutes and 24 hours. Iron oxides, iron chlorides and sulfuric iron compounds were low efficient and are not suitable for melt polymerization of lactide. The oxidation state was noticed not to affect the efficiency. Ferrocene required long polymerization times and a high concentration of the compound before a high molar mass polymer was received. Organic iron salts were also found to be efficient initiators/catalysts, except for the hydrated iron(III)citrate. Especially iron(II)acetate caused a rapid polymerization with a high conversion and molar mass.     

Material Design in Poly(Lactic Acid) Systems: Block Copolymers,Star Homo- and Copolymers,and Stereocomplexes

Abstract

This paper gives a general overview of several approaches we have investigated for designing new PLA-based polymers with a broad range of properties and improved processability. These approaches include: copolymerization (block and stereoblock copolymers), microstructure and architecture control, and stereocomplexation. Multiblock copolymers with alternating “soft” and “hard” segments, synthesized over a broad range of chemical compositions, show properties ranging from hard plastics to elastomers. Stereoblock copolymers with alternating amorphous and semicrystalline PLA blocks combine the advantages of PLA homopolymers (crystallinity) and random copolymers (processability). Independent control of polymer architecture and microstructure allows for the synthesis of star polymers with various arm morphologies. A new method for stereocomplex formation between L-PLA and D-PLA, which combines in-situ polymerization with stereocomplexation, is also described. For the synthesis of these new materials we took advantage of: 1) chirality of lactide monomer, 2) retention of configuration during polymerization, 3) living nature of the ring-opening polymerization (ROP) of lactide in the presence of active hydrogen groups such as OH and NH₂, and 4) control of the level of transesterification reactions.     

A Strategy for Control of "Random" Copolymerization of Lactide and Glycolide: Application to Synthesis of PEG-b-PLGA Block Polymers Having Narrow Dispersity

Poly(lactic-co-glycolic acid) (PLGA) is a biodegradable copolymer that is also acceptable for use in a variety of biomedical applications. Typically, a random PLGA polymer is synthesized in a bulk batch polymerization using a tin-based catalyst at high temperatures. This methodology results in relatively broad polydispersity indexes (PDIs) due to transesterification, and the polymer product is often discolored. We report here the use of 1,8-diazabicyclo[5.4.0]-undec-7-ene (DBU), a known, effective, and convenient organocatalyst for the ring-opening polymerization of cyclic esters, to synthesize random copolymers of lactide and glycolide. The polymerization kinetics of the homo- and copolymerizations of lactide and glycolide were explored via NMR spectroscopy. A novel strategy that employs a controlled addition of the more reactive glycolide monomer to a solution containing the lactide monomer, the poly(ethylene glycol) (PEG) macroinitiator, and DBU catalyst was developed. Using this tactic (semi-batch polymerization), we synthesized a series of block copolymers that exhibited excellent correlation of the expected and observed molecular weights and possessed narrow PDIs. We also measured the thermal properties of these block copolymers and observed trends based on the composition of the block copolymer. We also explored the need for experimental rigor in several aspects of the preparations and have identified a set of convenient reaction conditions that provide polymer products that retain the aforementioned desirable characteristics. These polymerizations proceed rapidly at room temperature and without the need for tin-based catalysts to provide PEG-b-PLGAs suitable for use in biomedical investigations.     

Synthesis of Star‐Shaped Poly(ϵ‐caprolactone)‐b‐Poly(styrene) Block Copolymer by Combining Ring‐Opening Polymerization and Atom Transfer Radical Polymerization

Newly designed star‐shaped block copolymers made of poly(?‐caprolactone) (PCL) and polystyrene (PS) were synthesized by combining ring‐opening polymerization (ROP) of ?‐caprolactone (CL) and atom transfer radical polymerization (ATRP) of styrene (St). The switch from the first to the second mechanism was obtained by selective transformation of “living” radical sites. First, tri‐ and tetrafunctional initiators were used as an initiator for the “living” ring opening polymerization (ROP) of ?‐caprolactone producing a hydroxyl terminated three or four arm star‐shaped polymer. Next, the OH end groups of PCL star branches were derivatized into 2‐bromoisobutyrate groups which gave rise to the corresponding tri‐ and tetrabromoester ended‐PCL stars; the latter served as macroinitiators for the ATRP of styrene at 110°C in the presence of CuBr/2,2‐bipyridine (Bipy) catalyst system affording star‐shaped block copolymers PCL_n‐b‐PS_n (n=3 or 4). The samples obtained were characterizated by ¹H‐NMR spectroscopy and GPC (gel permeation chromatograph). These copolymers exhibited the expected structure. The crystallization of star‐shaped block copolymers was studied by DSC (differential scanning calorimetry). The results show that when the content of the PS block increased, the T_m of the star‐shaped block copolymer decreased.     

Synthesis of amphiphilic block copolymers via ring opening polymerization and reversible addition-fragmentation chain transfer polymerization

Amphiphilic block copolymers were synthesized via a dual initiator chain transfer agent (inifer) that successfully initiated the ring opening polymerization (ROP) of l -lactide (LLA) and subsequently mediated the reversible addition-fragmentation chain transfer (RAFT) polymerization of poly(ethylene glycol) ethyl ether methacrylate (PEGEEMA). The formation of each polymer block was confirmed using ¹H nuclear magnetic resonance spectroscopy, as well as gel permeation chromatography, and comprehensive kinetics studies provide valuable insights into the factors influencing the synthesis of well-defined block copolymers. The effect of monomer concentration, reaction time, and molar ratios of inifer to catalyst on the ROP of LLA are discussed, as well as the ability to produce poly(lactide) blocks of different molecular weights. The synthesis of hydrophilic PPEGEEMA blocks was also monitored via kinetics to provide a better understanding of the role the chain transfer agent plays in facilitating the complex and sterically demanding RAFT polymerization of PEGEEMA.     

New Chromium on Silica Gel Catalysts with very high activity for the polymerization of ethylene

Together with the known chromium (II)/silica gel catalyst (Phillips catalyst) for the polymerization of ethylene, two new ones have been investigated. It was found that a chromium(II)-“repoly” catalyst (prepared by short reaction of the chromium(II)/silica gel with ethylene at temperatures between 100 and 225°C) and a chromium(III)/silica gel catalyst have up to hundred times higher activity than the chromium(II) one. Activation energies were calculated as 54.6, 49.6 and 43.8 kJ per mol, respectively. The number of active sites was determined by measuring the integrated absorbance of the C? H and C?O stretching vibrations of the polymer. At low chromium concentration (0.056%) roughly 50% of all chromium was catalytically active in the case of chromium(II) and chromium(III) on silica gel. For the chromium(II)-“repoly” catalyst all chromium atoms can be active. The turnover numbers for the polymerization at 20°C were calculated as 0.1 (chromium(II)), 7.5 (chromium(II)-“repoly”) and 20 (sec^?1 atm^?1) (chromium(III)).     

Biased Lewis Pairs: A General Catalytic Approach to Ether‐Ester Block Copolymers with Unlimited Ordering of Sequences

Polymerizing epoxides after cyclic esters remains a major challenge, though their block copolymers have been extensively studied and used for decades. Reported here is a simple catalytic approach based on a metal‐free Lewis pair that addresses the challenge. When the Lewis acid is used in excess of a base, selective (transesterification‐free) polymerization of epoxides occurs in the presence of esters, while selectivity toward cyclic esters is achieved by an oppositely biased catalyst. Hence, one‐pot block copolymerization can be performed in both ester‐first and ether‐first orders with selectivity being switchable at any stage, yielding ether‐ester‐type block copolymers with unlimited ordering of sequences as well as widely variable compositions and architectures. The selectivity can also be switched back and forth several times to generate a multiblock copolymer. Experimental and calculational results indicate that the selectivity originates mainly from the state of catalyst‐activated hydroxy species.     

Chemical Recycling of End-of-Life Poly(lactide) via Zinc-Catalyzed Depolymerization and Polymerization

The chemical recycling of poly(lactide) was investigated based on depolymerization and polymerization processes. Using methanol as depolymerization reagent and zinc salts as catalyst, poly(lactide) was depolymerized to methyl lactate applying microwave heating. An excellent performance was observed for zinc(II) acetate with turnover frequencies of up to 45000 h⁻¹. In a second step the monomer methyl lactate was converted to (pre)poly(lactide) in the presence of catalytic amounts of zinc salts. Here zinc(II) triflate revealed excellent performance for the polymerization process (yield: 91 %, M_n ∼8970 g/mol). Moreover, the (pre)poly(lactide) was depolymerized to lactide, the industrial relevant molecule for accessing high molecular weight poly(lactide), using zinc(II) acetate as catalyst.     

Thiourea-based bifunctional organocatalysis: supramolecular recognition for living polymerization

A versatile, metal-free, organocatalytic approach to the living ring-opening polymerization of lactide using a bifunctional thiourea-tertiary amine catalyst is described. Mild and highly selective polymerization conditions produced poly(lactides) with predictable molecular weights and extremely narrow polydispersities ( approximately 1.05), characteristic of a living polymerization. The extraordinary selectivity of this catalyst system for polymerization relative to transesterification is remarkably unusual. The low polydispersities and exceptional control observed are a consequence of selective transesterification of lactide relative to the open chain esters. Presumably, the ring strain of lactide provides both a driving force for the polymerization and a kinetic preference for polymerization relative to transesterification with catalyst. We postulate that the initiating/propagating alcohol is activated by acid-base interaction with the tertiary amine moiety and the carbonyl of the lactide monomer is simultaneously activated by hydrogen bonding to the thiourea moiety of the catalyst.     

One‐step synthesis of block copolymers using a hydroxyl‐functionalized trithiocarbonate RAFT agent as a dual initiator for RAFT polymerization and ROP

A range of well‐defined block copolymers were synthesized using 4‐cyano‐4‐(dodecylsulfanylthiocarbonyl)sulfanylpentanol (CDP) as a dual initiator for reversible addition‐fragmentation chain transfer (RAFT) polymerization and ring‐opening polymerization (ROP) in a one‐step process. Styrene, (meth)acrylate, and acrylamide monomers were polymerized in a controlled manner for one block composed of vinyl monomers, and δ‐valerolactone (VL), ε‐caprolactone (CL), trimethylene carbonate (TMC), and L ‐lactide (LA) were used for the other block composed of cyclic monomers. Diphenyl phosphate was used as a catalyst for the ROP of VL, CL, and TMC, and 4‐dimethyamino pyridine for the ROP of LA. These catalysts did not interfere with RAFT polymerization and the synthesis of various block copolymers proceeded in a controlled manner. CDP was found to be a very useful dual initiator for a one‐step synthesis of various block copolymers by a combination of RAFT polymerization and ROP. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Bioresorbable Hydrogels Prepared Through Stereocomplexation between Poly(L‐lactide) and Poly(D‐lactide) Blocks Attached to Poly(ethylene glycol)

Block copolymers were synthesized by ring‐opening polymerization of L ‐lactide or D ‐lactide in the presence of mono‐ or dihydroxyl poly(ethylene glycol), using zinc metal as catalyst. The resulting copolymers were characterized by various techniques, namely ¹H NMR spectroscopy, differential scanning calorimetry (DSC), X‐ray diffractometry, and Raman spectrometry. The composition of the copolymers was designed such that they were water soluble. Bioresorbable hydrogels were prepared from aqueous solutions containing both poly(L ‐lactide)/poly(ethylene glycol) and poly(D ‐lactide)/poly(ethylene glycol) block copolymers. Rheological studies confirmed the formation of hydrogels resulting from stereocomplexation between poly(L ‐lactide) and poly(D ‐lactide) blocks.

Ring‐opening polymerization of L (D )‐lactide in the presence of dihydroxyl PEG using zinc powder as catalyst.     

Synthesis,characterization, and thermal properties of dendrimer‐star,block‐comb copolymers by ring‐opening polymerization and atom transfer radical polymerization

Novel and well‐defined dendrimer‐star, block‐comb polymers were successfully achieved by the combination of living ring‐opening polymerization and atom transfer radical polymerization on the basis of a dendrimer polyester. Star‐shaped dendrimer poly(?‐caprolactone)s were synthesized by the bulk polymerization of ?‐caprolactone with a dendrimer initiator and tin 2‐ethylhexanoate as a catalyst. The molecular weights of the dendrimer poly(?‐caprolactone)s increased linearly with an increase in the monomer. The dendrimer poly(?‐caprolactone)s were converted into macroinitiators via esterification with 2‐bromopropionyl bromide. The star‐block copolymer dendrimer poly(?‐caprolactone)‐block‐poly(2‐hydroxyethyl methacrylate) was obtained by the atom transfer radical polymerization of 2‐hydroxyethyl methacrylate. The molecular weights of these copolymers were adjusted by the variation of the monomer conversion. Then, dendrimer‐star, block‐comb copolymers were prepared with poly(L ‐lactide) blocks grafted from poly(2‐hydroxyethyl methacrylate) blocks by the ring‐opening polymerization of L ‐lactide. The unique and well‐defined structure of these copolymers presented thermal properties that were different from those of linear poly(?‐caprolactone). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6575–6586, 2006     

Dendritic homopolymers and block copolymers: Tuning the morphology and properties

The synthesis and characterization of dendritic homopolymers and block copolymers of ?‐caprolactone and lactide (L ‐lactide and racemic lactide) were performed with multifunctional initiators in combination with living polymerization and the selective placement of branching junctures in a divergent growth strategy. A hexahydroxy‐functional 2,2‐bis(hydroxymethyl) propionic acid derivative was used as an initiator for the stannous‐2‐ethylhexanoate‐catalyzed living ring‐opening polymerization of ?‐caprolactone, L ‐lactide, and racemic L ,D ‐lactide. Branching junctions at the chain ends were introduced with benzylidene‐protected 2,2‐bis(hydroxymethyl) propionic acid. Subsequent generations were then polymerized, after deprotection, from these star‐shaped macroinitiators. Successive chain end capping and initiation produced three generations of polymers with molecular weights in excess of 130,000 g/mol and narrow polydispersities (<1.20). It was possible to prepare diblock and triblock copolymers with phase‐separated morphologies, and with L ‐lactide or D ,L ‐lactide, semicrystalline and amorphous morphologies were demonstrated. The polymers were characterized by ¹H NMR, ¹³C NMR, size exclusion chromatography, and differential scanning calorimetry. The compositions of the block copolymers and the conformational structures of the optically active polymers were also confirmed by optical rotation measurements. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1174–1188, 2004     

Efficient catalytic cycloalkane oxidation employing a "helmet" phthalocyaninato iron(III) complex

We have examined the catalytic activity of an iron(III) complex bearing the 14,28-[1,3-diiminoisoindolinato]phthalocyaninato (diiPc) ligand in oxidation reactions with three substrates (cyclohexane, cyclooctane, and indan). This modified metallophthalocyaninato complex serves as an efficient and selective catalyst for the oxidation of cyclohexane and cyclooctane, and to a far lesser extent indan. In the oxidations of cyclohexane and cyclooctane, in which hydrogen peroxide is employed as the oxidant under inert atmosphere, we have observed turnover numbers of 100.9 and 122.2 for cyclohexanol and cyclooctanol, respectively. The catalyst shows strong selectivity for alcohol (vs. ketone) formation, with alcohol to ketone (A/K) ratios of 6.7 and 21.0 for the cyclohexane and cyclooctane oxidations, respectively. Overall yields (alcohol + ketone) were 73% for cyclohexane and 92% for cyclooctane, based upon the total hydrogen peroxide added. In the catalytic oxidation of indan under similar conditions, the TON for 1-indanol was 10.1, with a yield of 12% based upon hydrogen peroxide. No 1-indanone was observed in the product mixture.     

A Facile Synthesis of Cleavable Block Copolymers via Tandem Polymerizations of NMRP and ATRP

A functionalized compound, 4‐(2‐bromoisobutyryl)‐2,2,6,6‐tetra‐methylpiperidine‐1‐oxyl (Br‐TEMPO), was synthesized and used to synthesize block copolymers through tandem nitroxide‐mediated radical polymerization (NMRP) and atom transfer radical polymerization (ATRP). First, Br‐TEMPO was used to mediate the polymerization of styrene. The kinetics of polymerization proved a typical “living” nature of the reaction and the effectiveness in the mediation of polymerization of Br‐TEMPO. Then the PS‐Br macroinitiator was used to initiate atom transfer radical polymerization (ATRP). A series of acrylates were initiated by PS‐Br macroinitiators in typical ATRP processes at various conditions. The controlled polymerization of ATRP was also confirmed by molecular weight and kinetic analysis. Several cleavable block copolymers of PS‐b‐P(t‐BA), PS‐b‐P(n‐BA), and PS‐b‐PMA, with different molecular weights, were synthesized via this strategy. Relatively low polydispersities (<1.5) were observed and the molecular weights were in agreement with the theoretical ones. Hydrolysis of PS‐b‐P(t‐BA) was carried out, giving amphiphilic block copolymer PS‐b‐PAA without the cleavage of C‐ON bond or ester bond. All the block copolymers have two T_gs as demonstrated by DSC. A typical cleavable block copolymer of PS‐b‐PMA was cleaved by adding phenylhydrazine at 120°C to produce homopolymers in situ.     

Conducting Block Copolymer Nanowires Containing Regioregular Poly(3‐Hexylthiophene) and Polystyrene

Grignard Metathesis polymerization (GRIM) for the synthesis of regioregular poly(3‐alkylthiophenes) proceeds via a “living” chain growth mechanism. Due to the “living” nature of this polymerization regioregular poly(3‐alkylthiophenes) with predetermined molecular weight, narrow molecular weight distributions and desired chain end functionality are now readily available. Allyl terminated poly(3‐hexylthiophene) was successfully used as a precursor for the synthesis of di‐block copolymers containing polystyrene. The addition of “living” poly(styryl)lithium to the allyl terminated regioregular poly(3‐hexylthiophene) generated the di‐block copolymer. Poly(3‐hexylthiophene)‐b‐polystyrene was also synthesized by atom transfer radical polymerization. Integration of poly(3‐hexylthiophene) in di‐block copolymers with polystyrene leads to the formation of nanowire morphology and self‐ordered conducting nanostructured materials.     

Polymeric catechol derivatives. IV. Polymerization behavior of 4-vinylcatechols and some properties of their polymeric derivatives

The polymerization and copolymerization of 4-vinylcatechols, such as 2-(0-methyl)-4-vinylcatechol (I), 3,4-dimethoxystyrene (II), and 3,4-methylenedioxystyrene (III), were investigated in cyclohexanone at 30°C, using tri-n-butylborane as an initiator. The reactions yielded vinyl polymers and copolymers. The copolymerization parameters of I–III were determined; their Q and e values were found to be similar to those of styrene and vinylhydroquinone. The copolymerization of I–III gave copolymers of a highly alternating character. The thermal stability of the polymers and copolymers so obtained was also studied. The redox potentials of hydroloyzed poly(I) were examined; the reverse “polymer effect” was observed.     

Synthesis of Isotactic–Heterotactic Stereoblock (Hard–Soft) Poly(lactide) with Tacticity Control through Immortal Coordination Polymerization

A one‐pot method for the preparation of a new family of PLA materials is reported that combines heterotactic (soft) and isotactic stereoblocks (hard). The ring‐opening polymerization of rac‐lactide with a salan–rare‐earth‐metal–alkyl complex in the presence of excess triethanolamine was performed in an immortal mode to give three‐armed heterotactic poly(lactide) (soft) with excellent end‐hydroxy fidelity. The in situ addition of a salen–aluminum–alkyl precursor to the above polymerization system under any monomer‐conversion conditions activated the “dormant” hydroxy‐ended PLA chains to propagate through the incorporation of the remaining rac‐lactide monomer, but with isospecific selectivity (hard). The resultant PLA had a three‐armed architecture with controlled molecular weight and extremely narrow molecular‐weight distribution (PDI<1.08). More strikingly, each side‐arm simultaneously possessed highly heterotactic (soft) and highly isotactic (hard) segments and the ratio of these two stereoregular sequences could be swiftly adjusted by tuning the addition time of the salen–aluminum–alkyl precursor to the polymerization system. Therefore, star‐shaped hard–soft stereoblock poly(lactide)s with various P_m values and crystallinity were achieved in a single reactor for the first time. This strategy should be applicable to the synthesis of a series of new types of stereoblock polyesters by using an immortal‐polymerization process and a proper choice of specific, selective metal‐based catalysts.     

A-B-A Triblock and (A-B)n Segmented Block Copolymers of Styrene and Ethylene Oxide via Thermal Iniferters

A free radical technique is described for the synthesis of tri- and multiblock copolymers of styrene and ethylene oxide through polyethylene oxide-based thermal “iniferters.” The mono- or dihydroxy-terminated oligomeric polyethylene oxides were chemically transformed to the secondary amine terminated species. Thiocarba-mylation and oxidation of the amine groups gave rise to macro- or polymeric thiuram disulfides called macro- or polymeric “iniferters,” respectively. Thermal polymerization of styrene in the presence of the macro iniferter led to the formation of their perfect triblock copolymers, with styrene forming the central block. Utilization of the polymeric iniferter, on the other hand, give rise to (A-B)_n type segmented copolymers containing as many as 3 (A-B) sequences. The length of each block could be regulated by the choice of the appropriate iniferter and its relative concentration with respect to the monomer. The iniferters and the block copolymers were characterized.     

Iron complexes as potential photocatalysts for controlled radical photopolymerizations: A tool for modifications and patterning of surfaces

This article reports on the presumably first use of iron complexes (FeC) as potential photocatalysts for controlled radical photopolymerization reactions (CRP2). Three compounds were designed and investigated. Good linear evolutions of the molecular weight (Mn) with the conversion were observed. A comparison was provided with a reference iridium (III) complex [Ir(ppy)3 where ppy stands for 2‐phenylpyridine]. The on/off photopolymerization experiments highlight the presence of dormant species and a re‐initiation on demand upon irradiation. This unique re‐initiation property was used for the modification of surfaces (hydrophilic/hydrophobic properties) and surface patterning as well as the synthesis of a block co‐polymer (PMMA‐b‐PBA). A comparative analysis of the behavior of these iron complexes in thermally and photochemically activated polymerization was provided. The chemical mechanisms were studied by steady state photolysis, laser flash photolysis, cyclic voltammetry, luminescence quenching, and electron spin resonance experiments. A catalytic cycle was proposed with two steps: (i) the oxidation of the FeC excited state by an alkyl halide and (ii) the reduction by the oxidized form (FeC°+) by an amine or the macroradicals leading to the regeneration of the catalyst. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 702–713